MKme Lab | Everything You Need To Know About The Neptune 3 Plus 3D Printer 🔥 @MkmeOrg | Uploaded January 2023 | Updated October 2024, 1 week ago.
Review of the Neptune 3 Plus 3D Printer from unboxing, to tuning to printing PLA and TPU. 3D printer: elegoo.com/en-ca/products/elegoo-neptune-3-plus-fdm-3d-printer-with-larger-build-volume-of-320x320x400mm
My PrusaSlicer profiles for the Neptune 3 Plus: patreon.com/posts/elegoo-neptune-3-76872019?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
Neptune 3 Plus on Amazon (soon) amzn.to/3Zfo7xG
Join the Patreon Squad! mkme.org/Patreon
Specs:
【Dual-Gear Direct Extruder】The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.
【Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.
【Auto Bed Leveling】ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first layer print.
【PEI Magnetic Platform】PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.
【Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.
ELEGOO Neptune 3 Plus FDM 3D Printer with 49-Point Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Removable Capacitive Screen, Larger Printing Size of 320x320x400 mm / 12.59x12.59x15.74 Inches
------------------------------------------------------
➡️Gear to Buy ⬅️
Buy one of my project kits HERE! ➢ store.mkme.org/?product_cat=custom
ALL the gear I use in these videos ➢ mkme.org/Gear
Shop Amazon US ➢ mkme.org/AmazonUS
Shop Amazon CAN ➢mkme.org/AmazonCA
Shop Amazon UK ➢ mkme.org/AmazonUK
Shop eBay ➢ mkme.org/ebay
Shop my MKME.org Store ➢ store.mkme.org
Shop Bangood ➢ mkme.org/banggood
Grab a cool Maker T-Shirt ➢ mkme.org/merch
------------------------------------------------------
➡️I have MORE YouTube Channels you need to subscribe! ⬅️
MKME LAB ➢ youtube.com/mkmeorg
MKME Media ➢ youtube.com/channel/UCTUoaahtQ3eIBtUvwaE2ixw
MKME Outdoors ➢ youtube.com/channel/UCgdCZiBOmHA8zd9_7STS6LA
MKME TV ➢ youtube.com/channel/UCfDqotmv53kzbfgqoDdL7NQ
-----------------------------------------------------
➡️Learning and News ⬅️
Daily maker/electronics news! ➢ news.mkme.org
Learn to make these projects ➢ learn.mkme.org
Make money from your hobbies ➢ mkmemedia.com
------------------------------------------------------
➡️Get Social with Me ⬅️
Join the MKME Discord live chat here ➢ discord.gg/j9S4Fgv
MKME Forum ➢ forum.mkme.org
Reddit ➢ r/mkme
Twitter ➢ twitter.com/MKmeOrg
Instagram ➢ instagram.com/mkmeorg
Facebook ➢facebook.com/EricWilliam13
-----------------------------------------------------
➡️My Websites and Related ⬅️
Main Site ➢ mkme.org
Blog ➢ blog.mkme.org
MKME Facebook Page ➢ goo.gl/aXg29
Odysee ➢ odysee.com/@mkmeorg
Mail:
MKME Lab
PO Box 493
Goderich Ontario Canada
N7A 4C7
-----------------------------------------------------
Want to learn how to do what I do? Go here skillshare.eqcm.net/gb0PMr
Sweet Tunes from Epidemic Sounds: share.epidemicsound.com/o6sg9x
Thanks for Subscribing!
0:00 Intro
00:36 Unboxing
01:41 Assembly
02:20 Tips & Tricks
02:46 Bed Levelling
03:28 Printing Results with Provided PLA and Gcode
05:50 LED Lighting
06:18 PLA printing with my PrusaSlicer profiles
09:35 TPU printing with my PrusaSlicer profiles
10:24 Noise measurements dB
11:40 Large prints in Spiral Vase Mode
12:30 Conclusions
Review of the Neptune 3 Plus 3D Printer from unboxing, to tuning to printing PLA and TPU. 3D printer: elegoo.com/en-ca/products/elegoo-neptune-3-plus-fdm-3d-printer-with-larger-build-volume-of-320x320x400mm
My PrusaSlicer profiles for the Neptune 3 Plus: patreon.com/posts/elegoo-neptune-3-76872019?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
Neptune 3 Plus on Amazon (soon) amzn.to/3Zfo7xG
Join the Patreon Squad! mkme.org/Patreon
Specs:
【Dual-Gear Direct Extruder】The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.
【Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.
【Auto Bed Leveling】ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first layer print.
【PEI Magnetic Platform】PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.
【Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.
ELEGOO Neptune 3 Plus FDM 3D Printer with 49-Point Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Removable Capacitive Screen, Larger Printing Size of 320x320x400 mm / 12.59x12.59x15.74 Inches
------------------------------------------------------
➡️Gear to Buy ⬅️
Buy one of my project kits HERE! ➢ store.mkme.org/?product_cat=custom
ALL the gear I use in these videos ➢ mkme.org/Gear
Shop Amazon US ➢ mkme.org/AmazonUS
Shop Amazon CAN ➢mkme.org/AmazonCA
Shop Amazon UK ➢ mkme.org/AmazonUK
Shop eBay ➢ mkme.org/ebay
Shop my MKME.org Store ➢ store.mkme.org
Shop Bangood ➢ mkme.org/banggood
Grab a cool Maker T-Shirt ➢ mkme.org/merch
------------------------------------------------------
➡️I have MORE YouTube Channels you need to subscribe! ⬅️
MKME LAB ➢ youtube.com/mkmeorg
MKME Media ➢ youtube.com/channel/UCTUoaahtQ3eIBtUvwaE2ixw
MKME Outdoors ➢ youtube.com/channel/UCgdCZiBOmHA8zd9_7STS6LA
MKME TV ➢ youtube.com/channel/UCfDqotmv53kzbfgqoDdL7NQ
-----------------------------------------------------
➡️Learning and News ⬅️
Daily maker/electronics news! ➢ news.mkme.org
Learn to make these projects ➢ learn.mkme.org
Make money from your hobbies ➢ mkmemedia.com
------------------------------------------------------
➡️Get Social with Me ⬅️
Join the MKME Discord live chat here ➢ discord.gg/j9S4Fgv
MKME Forum ➢ forum.mkme.org
Reddit ➢ r/mkme
Twitter ➢ twitter.com/MKmeOrg
Instagram ➢ instagram.com/mkmeorg
Facebook ➢facebook.com/EricWilliam13
-----------------------------------------------------
➡️My Websites and Related ⬅️
Main Site ➢ mkme.org
Blog ➢ blog.mkme.org
MKME Facebook Page ➢ goo.gl/aXg29
Odysee ➢ odysee.com/@mkmeorg
Mail:
MKME Lab
PO Box 493
Goderich Ontario Canada
N7A 4C7
-----------------------------------------------------
Want to learn how to do what I do? Go here skillshare.eqcm.net/gb0PMr
Sweet Tunes from Epidemic Sounds: share.epidemicsound.com/o6sg9x
Thanks for Subscribing!
0:00 Intro
00:36 Unboxing
01:41 Assembly
02:20 Tips & Tricks
02:46 Bed Levelling
03:28 Printing Results with Provided PLA and Gcode
05:50 LED Lighting
06:18 PLA printing with my PrusaSlicer profiles
09:35 TPU printing with my PrusaSlicer profiles
10:24 Noise measurements dB
11:40 Large prints in Spiral Vase Mode
12:30 Conclusions
