Uploaded November 2025 | Updated September 2026, 2 weeks ago
Not only do we expose the cold spots, we also test to see if they matter!
Help support this channel! patreon.com/Needitmakeit
A short list to help support this channel, thank you so much for your help!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
NoWhereStair Adhesion Test- makerworld.com/en/models/899379-nowherestair-buildplate-adhesion-torture-test#profileId-858068
I just reviewed the new Bambu H2C and it is an awesome printer and I put so many hours on it to make sure that if there were problems that I found them. When I heard that there was a 30 degree difference in the bed temperature, it had me a bit concerned that I had missed something when I did the review, so I wanted to check. Along with checking the H2C, I thought it would be a good idea to also check some other printers, because if there were cold spots and adhesion problems, I would have already found them right? We'll that's not actually completely true, like any subject, there is far more to it than meets the eye, and literally in this case. So we're going hi-tech with the Thermal camera and we're also doing some extreme testing on each printer so see if those cold spots really do impact bed adhesion. The results of this testing surprised me and also were extremely helpful in finding ways to solve the problems of cold spots. I hope the video is as helpful and informative for you as it was for me!
#bambu
#x1carbon
#H2C
Not only do we expose the cold spots, we also test to see if they matter!
Help support this channel! patreon.com/Needitmakeit
A short list to help support this channel, thank you so much for your help!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
NoWhereStair Adhesion Test- makerworld.com/en/models/899379-nowherestair-buildplate-adhesion-torture-test#profileId-858068
I just reviewed the new Bambu H2C and it is an awesome printer and I put so many hours on it to make sure that if there were problems that I found them. When I heard that there was a 30 degree difference in the bed temperature, it had me a bit concerned that I had missed something when I did the review, so I wanted to check. Along with checking the H2C, I thought it would be a good idea to also check some other printers, because if there were cold spots and adhesion problems, I would have already found them right? We'll that's not actually completely true, like any subject, there is far more to it than meets the eye, and literally in this case. So we're going hi-tech with the Thermal camera and we're also doing some extreme testing on each printer so see if those cold spots really do impact bed adhesion. The results of this testing surprised me and also were extremely helpful in finding ways to solve the problems of cold spots. I hope the video is as helpful and informative for you as it was for me!
#bambu
#x1carbon
#H2C
