Practical Printing
E3D New Tech Live from MRRF2018 **UPDATE IN COMMENTS BELOW**
updated
More info can be found here: artillery3d.com
OR to find the Genius Pro, please try here:artillery3d.com/products/artillery%C2%AE-genius-pro-3d-printer-titan-direct-drive-type-866866984-inch-build-volume-01-035mm-resolution-ultra-quiet-stepper-motor-250mm-s-tft
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate, I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Research: pp3d.me/Prusa
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
While I am a beta tester for Prusa, this is the shipping production unit: my experience should be the same as anyone else’s opening the box and doing their first run (except without the distraction of streaming while assembling…)
More info can be found here:
prusa3d.com/product/original-prusa-xl-7
And the latest blog post and update on shipping:
blog.prusa3d.com/original-prusa-xl-now-shipping_75721
*********************************************************
I mention it at the beginning of the Twitch stream, and I am putting this out here now:
While I respect everyone’s rights to free speech and to have
their own opinions- there is a lot of toxicity in the 3D printing
community right now comparing this printer to another (you
all know which one I am talking about). This video is NOT
about that printer or company, it is about the XL. ANY
comments that are not relevant to this machine, or come
across as negative or not constructive to discussion about
THIS PRINTER will be deleted.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Research: pp3d.me/Prusa
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
During the review process, I had logged over 200 hours of live printing on this machine over on twitch.tv/makerdeck.
I had also unboxed and fired up the first print live on Twitch on my channel there. The VOD will be public until twitch cycles it out at twitch.tv/crussty3d
If you would like to learn more about this particular unit, you can check out:
flashforge-usa.com/products/flashforge-artemis-3d-printer
If you are an educator and would like to learn more about their education bundles, check out:
flashforge-usa.com/pages/flashforge-artemis-3d-printer-education-bundle
If you are interested in picking one up, they are available on Amazon (US) with prime shipping:
amzn.to/3LdFwzU (affiliate)
*********************************************************
DISCLOSURE: This printer was provided to me at no cost for review via representatives of FlashForge USA. I was not compensated monetarily in any way for my opinions or time, but I was allowed to keep the printer. As this video was intended to be timed around the product release date, FlashForge was afforded a pre-screening of the video, however I was not asked to change any content before release. Additionally, I was afforded a period of time to make suggestions for improvements to the FlashForge team, so many of the negatives I point out in this video have already been suggested for improvement.
*********************************************************
Did you know I also stream on Twitch? Follow at twitch.tv/crussty3d for notifications on when I go live!
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
Interested in learning more about MakerDeck? Check us out on Twitch at:
twitch.tv/makerdeck
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
I will be streaming most of the build live in pieces, focusing on interacting with the chat as much as possible and answering questions along the way. I hope you enjoy and find this helpful.
This is an export from the live Twitch stream. -- Watch it live before being archived here at twitch.tv/crussty3d
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
pp3d.me/f1pp
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Printers: pp3d.me/Prusa
MatterHackers: pp3d.me/mhpp
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
The train will be stopping by many of your favorite streamers stations on both YouTube and Twitch during the week leading up to Christmas 2021. Be sure to catch them all for your chances at Great prizes, including Ultistik flex plates, Filament and much more!
Over the course of the week, the Gift Train will be stopping by DWIT3D, Loyal Moses, Bwana, Live Via, DB3D_Dan and Father funks channels. Possibly even a few more surprise stops along the way... who knows???
All items being given away are curtesy of FilamentOne and Ultistik. More details will be provided during the stream- but it will be international, and you must be present to win!
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
pp3d.me/f1pp
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Printers: pp3d.me/Prusa
MatterHackers: pp3d.me/mhpp
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Check it out over at oseq.io
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/PracticalPrinting
Use code 'PracticalPrinting' at checkout.
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
For more details on the X2 check out:
3dp.to/pDq2w or
artillery3d.com
This printer was provided to Practical Printing for purposes of evaluation and making content with the printer. No money exchanged hands in either direction.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
pp3d.me/f1pp
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Printers: pp3d.me/Prusa
MatterHackers: pp3d.me/mhpp
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
For more details on the X2 check out:
3dp.to/pDq2w or
artillery3d.com
This printer was provided to Practical Printing for purposes of evaluation and making content with the printer. No money exchanged hands in either direction.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
pp3d.me/f1pp
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Prusa Printers: pp3d.me/Prusa
MatterHackers: pp3d.me/mhpp
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/PracticalPrinting
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
We can also take a quick look at the new Edgee Follow camera accessory!
For more details on the Hornet Pre-sale check out:
3dp.to/b3XB0
Special thanks to @GRAFITOMI for his help with the thumbnail!
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/PracticalPrinting
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Remember, a vase on an SLA/MSLA print is essentially a big suction cup, so you HAVE to add a hole in the bottom of you vase and plug it up later.
Model shown in this video example:
prusaprinters.org/prints/7308-spiral-vase/files
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/PracticalPrinting
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
This giveaway is open world wide too! You can learn more and enter to win here:
gleam.io/kUJ3R/1st-profi-box-anniversary-giveaway
***** Check this link often as new ways to win will be periodically added!
This video was published at the request of FilamentOne to help promote their giveaway and is considered a sponsored video, however no money, products or other goods were exchanged for this endorsement.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/PracticalPrinting
Use code 'PracticalPrinting' at checkout.
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
In this video, I showcase the new Resin starter kit available over at FilamentOne. If you would like to check it out you can see the use the affiliate link below. ADDED BONUS: use the code "PracticalPrinting" at checkout to receive an additional 5% off your order!!!
filamentone.com/products/3d-printing-resin-accessory-set-with-slap-mat?_pos=1&_sid=d9983f9d3&_ss=r&aff=1
*********************************************************
When dealing with resins, please always read and adhere to the manufacturers safe handling and processing procedures. This should be found in the resin’s MSDS/SDS forms, which they are LEGALLY obligated to provide to you. If a manufacturer does not make this available online, ask them for it- if they still cannot provide, move on to a different resin.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
Interested in the pre-order on this, or just want more information? Check out:
metaform.us
*********************************************************
Check out my original first look at this back in 2017:
youtu.be/OByhHPi54SM
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
If you’d like to pick a Peopoly Phenom, there are currently two ways to order.
If you are in the US, you can order the Phenom at MatterHackers with free shipping (aff link):
tinyurl.com/y532hkac
The Phenom is also available world wide from Peopoly direct (aff link):
http://bit.ly/2OOVUMe
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links.
amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Note, that contrary to what I do in the video, I should have been gloved up for this process. I was not expecting any contact with the resin (boy was I wrong…) and opted not to, but I should not have take the risk.
When dealing with resins, please always read and adhere to the manufacturers safe handling and processing procedures. This should be found in the resin’s MSDS/SDS forms, which they are LEGALLY obligated to provide to you. If a manufacturer does not make this available online, ask them for it- if they still cannot provide, move on to a different resin.
Note: This is a re-post of my earlier tutorial on SLA Resin Welding as somehow the video disappeared from the YT library.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
The LightBurn Video tutorials mentioned in this video can be found at:
lightburnsoftware.com/pages/tutorials
Additional help and documentation on LightBurn can be accessed online at:
forum.lightburnsoftware.com
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
cohesion3d.com/shop/controllers/cohesion3d-laserboard
If you are curious about the LightBurn software, check out:
lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
In the third and final episode, I will cover setting up Lightburn software to run it.
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
Forum pages showing in the video:
LaserBoard Firmware + Config Stock Files on Memory Card
forum.cohesion3d.com/t/laserboard-firmware-config-stock-files-on-memory-card/96
Improved Raster Speed Firmware Update for Cohesion3D Boards!
forum.cohesion3d.com/t/improved-raster-speed-firmware-update-for-cohesion3d-boards/850
Setting Up the Correct Bed Size
forum.cohesion3d.com/t/setting-up-the-correct-bed-size/492
*********************************************************
To follow along with the installation, I’d suggest starting at:
cohesion3d.com/start
Cohesion3d Support Forums can be found here:
forum.cohesion3d.com
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
cohesion3d.com/shop/controllers/cohesion3d-laserboard
If you are curious about the LightBurn software, check out:
lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
With a great feature set and sound build, this is a fairly high end machine designed for the serious user. I think it is targeted more towards the Pro-sumer / Business / Dental / Jewelry markets, but it is also suited for any serious hobbyist or home user.
Disclaimer:
This video is not a paid promotion or endorsement. I was provided the unit free of charge as a 'loaner' to test and use for content, and will be returning it when testing is complete.
*********************************************************
If you’d like to pick up a Shuffle or any of it’s siblings such at the Larger XL or the new 4K for yourself- or you just want more information, check out:
filamentone.com/collections/phrozen-3d
(Not an affiliate link)
If you prefer the Amazon route, the Phrozen Shuffle is also available at:
amzn.to/2YUWaKS
(Affiliate link)
And it's also available WITH the ParaLED 2.0 system I mentioned in the video already installed:
amzn.to/2GWzkwe
(Affiliate link)
As an added bonus, use code 'PracticalPrinting' at checkout over at the FilamentOne site on anything (not just the Shuffle) to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!)
*********************************************************
Models shown in this Video:
Captain America bust by Eastman:
myminifactory.com/object/3d-print-captain-america-bust-71146
Piggy Sitting(Sir Pigglesfree) by Loubie3D
myminifactory.com/object/3d-print-piggy-sitting-sir-pigglesfree-single-extrusion-version-96702
Open Source Hardware Ring by DjSplitterPro
thingiverse.com/thing:358031
SLA_Icosohedron by Brandon Plumbo
prusaprinters.org/prints/1466-sla_icosohedron
And last, but not least…
Voodoo Bree by Arte Creator
myminifactory.com/object/3d-print-voodoo-bree-95797
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
In this episode of SLA 101, while it is not the most efficient process, I’ll show you how to recover as much as possible so you can minimize waste and reuse it.
Also, if you don’t stay for the entire process, please tune in towards the end for a very important safety message about resin and resin handling.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
In future episodes, I will cover installing firmware onto the board, and setting up Lightburn software to run it.
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
To follow along with the installation, I’d suggest starting at:
cohesion3d.com/start
Cohesion3d Support Forums can be found here:
forum.cohesion3d.com
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
cohesion3d.com/shop/controllers/cohesion3d-laserboard
If you are curious about the LightBurn software, check out:
lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
cohesion3d.com/shop/controllers/cohesion3d-laserboard
If you are curious about the LightBurn software, check out:
lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
Check out the SL1 and CW1 at Prusa’s shop here for more specs and details:
shop.prusa3d.com/en/52-original-prusa-sl1
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
Check out the SL1 and CW1 at Prusa’s shop here for more specs and details:
shop.prusa3d.com/en/52-original-prusa-sl1
*********************************************************
Just a few of the models I showed in this video close up:
PowderPuff Unicorn by ChaosCoreTech (Chelsey)
thingiverse.com/thing:3621871
Man of Steel Bust by Eastman
myminifactory.com/object/3d-print-superman-bust-63635
Light Cycle by AngryTiki
thingiverse.com/thing:1782640
Tree frog for SLA/DLP printers by scobo
thingiverse.com/thing:3124861
Vine Egg by bugman_140
thingiverse.com/thing:3561971
Squizzle! A Supports Free Squirrel Sculpt by loubie
thingiverse.com/thing:2522823
Bilbo Baggins by andre1jr
thingiverse.com/thing:610360
The Elder Lighthouse by Jukka Seppänen (kijai)
myminifactory.com/object/3d-print-the-elder-lighthouse-71894
Sonic The Hedgehog by Tariq Ali (3DGuyDubai)
3dprintinggeek.net/product-page/sonic-the-hedgehog-use-promocode-sonic-get-it-free
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Time to update the Prusa MK3 again to the R3 release. So the Carbodeon uDiamond filament WAS going to make a great Retro Looking Prusa. The parts were smooth and buttery… It WAS going to be ugly and beautiful and worn and warm… But it’s not... BIG FAIL!!!
So much disappointment…. :(
Upwards and onwards! Time to call in reinforcements and move on to Plan FF… Stay tuned for the conclusion…
*********************************************************
You can learn more about the Carbodeon uDiamond filament here:
carbodeon.com/product/udiamond
Check out Stefan’s (CNC Kitchen) review of this filament here:
youtu.be/OKryzuUQ5JM
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
*********************************************************
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
While I’m at it, I point out notable features- as well as some things that I don’t like about the design. A more comprehensive review will be done after some time with the printer.
This is a VERY long video as I wanted to cover this in detail, so please feel free to scan through it.
Special thanks to 3DMakerNoob for his spoof intro! If you don’t follow him, you are missing out! Check out his channel at: bit.ly/2qgQgb7
Special thanks to Joel Telling for help on the video thumbnail. Of course you all know 3DPrintingNerd right???
http://3d.pn
*********************************************************
You can get the A20M direct from Geeetech here. Use code WCDSW to save $30!
geeetech.com/220.html
Or on Amazon US:
amzn.to/2TPLUlr
Or on Amazon UK:
(Coming soon!)
You can check out the FilamentOne GLINT Filaments that I used here:
filamentone.com/collections/3d-printing-filament
As an added bonus, use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!)
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Congratulations to all 5 of the lucky winners.
Didn't win a prize? You're still a winner!!!
Use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!)
You can check out FilamentOne Here:
filamentone.com/collections/3d-printing-filament
*********************************************************
You can check out the AnyCubic Chiron that was the Grand Prize here:
http://www.anycubic3d.com/products/show/1356.html
Or on Amazon:
amzn.to/2swwir1
Or on Amazon UK:
amzn.to/2RQxfc4
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Enter to win at:
gleam.io/LPbfY/get-your-glint-on-the-giveaway
Prizes are to be:
Grand Prize- Anycubic Chiron
2nd Winner- 5 rolls of PRO SELECT filament
3rd Winner- 3 rolls of PRO SELECT filament
4th Winner- 1 roll of PRO SELECT filament
5th Winner- $10 FilamentOne gift card
*********************************************************
You can check out FilamentOne Here:
filamentone.com/collections/3d-printing-filament
As an added bonus, use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!)
Also, you can check out the AnyCubic Chiron that is the Grand Prize here:
http://www.anycubic3d.com/products/show/1356.html
Or on Amazon:
amzn.to/2swwir1
Or on Amazon UK:
amzn.to/2RQxfc4
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
I used Simplify3D for this tutorial because the interface showed well on camera, but because this process is mostly in the startup script, ANY slicer that supports multi-extruders will work.
The startup Gcode for this process is:
M163 S0 P1.00 ; Set Left to 100%
M163 S1 P0.00 ; Set Right to 0%
M164 S0 ; Save Mix
M163 S0 P0.00 ; Set Left to 0%
M163 S1 P1.00 ; Set Right to 100%
M164 S1 ; Save Mix
M163 S0 P0.50 ; Set Left to 50%
M163 S1 P0.50 ; Set Right to 50%
M164 S2 ; Save Mix
Etc….
Remember on the M164 command, this is the number of the extruder/Toolhead you will assign, minus 1. i.e. S0 = Extruder 1, S1 = Extruder2, S2 = Extruder 3 (first virtual extruder), etc.
If you would like to pick up an A10M, they are available here:
Amazon US :
amzn.to/2LDAHRC
Amazon UK:
amzn.to/2RhFFJ7
Or WorldWide:
geeetech.com/152.html
If you would like to pick up an A20M, they are available here:
Amazon US :
amzn.to/2LzWPN0
Amazon UK:
amzn.to/2Agskai
Or WorldWide:
geeetech.com/173.html
** Above are all affiliate links
*********************************************************
Models shown:
Low-Poly Charmander - Multi and Dual Extrusion version by Flowalistik:
thingiverse.com/thing:1834722
(Sorry I didn’t mention this in the video!)
Vine Christmas Tree by Bugman_140:
thingiverse.com/thing:3253921
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Special thanks to Tom Jackson, AKA @FilamentFrenzy for the snazzy editing job on this so I could get it out quickly. If you aren’t already, give him a follow on twitter and watch his Youtube Channel for some great content to come!
youtube.com/channel/UCGZ8JpWI39L0h3TvVyBfnmQ
You can pick up a Palette 2 off Amazon right now here:
US: amzn.to/2zH9CZe (affiliate link)
Or a Palette 2 Pro when back in stock:
US: amzn.to/2UgQRo4 (affiliate link)
Or from Mosaic direct when back in stock:
mosaicmfg.com
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: amzn.to/2RCmnv9
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
See the first siting of the all new Streamline Delta Printer as well as get a peak at the new FilamentOne PRO series filament!!!
If you are at the Faire, stop by and say hi!!!
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
The RepBox is the ultimate wall mounted spool holder, and you can even get custom side panels!
Best off- it's made for makers, by makers!!!
Check it out here:
repkord.com/repbox
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
If you aren't familiar with Geetechs newest OPEN SOURCE printer, it is a 2 color MIXING printer!!!!!
Check out the link below for specs, details and pricing!
geeetech.com/geeetech-a10m-mixcolor-3d-printer-p-1036.html
(NON affiliate link)
They are also available at Gearbest:
goo.gl/oooY7y (Affiliate Link)
Or over at Banggood:
goo.gl/D2AG5R (Affilate Link)
** Geeetech sent this printer to us at no cost so that we could use it in projects and do an unbiased review of the unit.
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
geeetech.com/103.html
(affiliate link)
*********************************************************
This printer was provided to Practical Printing at no cost from Geeetech for use in reviews and contact on the channel.
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Let get this thing out of the box and put together! If you aren't familiar with Geetechs newest OPEN SOURCE printer, check out the link below for specs, details and special pricing!
geeetech.com/103.html
(affiliate link)
*********************************************************
This printer was provided to Practical Printing at no cost from Geeetech for use in reviews and contact on the channel.
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Special thanks to @3DPrinTek for the fan trick fan guard. If you are in Europe, check out his shop here: https://www.3dprintek.at
Updated Prusa parts can be found on GitHub here:
github.com/prusa3d/Original-Prusa-i3/tree/MK3/Printed-Parts/stl
*********************************************************
**** UPDATE: FilamentOne has offered up a discount to all Practical Printing fans! Use code 'PracticalPrinting' at checkout for a 5% discount. You can use this with the links below, or on anything you want to pickup- and the code doesn't expire! ****
I picked up the E3D Gold Edition hot-end from Fillamentone here:
filamentone.com/collections/hotends/products/e3d-v6-gold-hotend-full-kit-1-75mm-24v
I purchased the Fillamentum CPE Deep Sea Transpartent from Filamenone also:
filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-hg-100-deep-sea-transparent
And of course the UV reactive Neon yellow CPE:
filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-extrafill-hg100-neon-yellow-transparent
The replacement sleeving I used for the cabling was:
1/4in:
amzn.to/2t2X8rI
3/8 in:
amzn.to/2lfMMAn
And 1/2 in:
amzn.to/2MA4SJz
*********************************************************
Both the See-Thru fan duct and the Zaribo edition control board case can be found in the Practical Printing collection on Thingiverse here:
thingiverse.com/Crussty/collections/practical-printing-channel
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Practical Printing is an Amazon affiliate and links in the description above to products used in this video are from affiliate links.
Stay tuned for the follow up video on the configuration process of the Duet Board!!!
***** NOTE *****
At the time I received my kit, SeeMeCNC was including pre-assembled SE-300 effector/hotend modules in the kit. Since that time, they have changed it requiring, the builder to assemble their own hotend. I may do a follow up video on the assembly process of the SE-300 if the opportunity presents itself.
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
The sub-manual for the Heated bed is here:
seemecnc.dozuki.com/Guide/REV+10+Heated+Bed/79
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
This one is a little long, but I opted not to break it up. I made some mistakes on this step and felt that it was important to show those, as well as the way I went about fixing them.
***EDIT***
As Vance mentioned below in the comments, I missed a step in the video on the bed. There is a little solder pad between the +1 and +2 points that needs to be bridged over to power the LED when the bed is heating. See the manual for details on this.
Good catch Vance!
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
The sub-manual for the Heated bed is here:
seemecnc.dozuki.com/Guide/REV+10+Heated+Bed/79
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
My apologies in advance about the oscillating camera focus. Not sure what was going on their, but the camera didn’t like the black parts against the black table.
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
In Parts 12a and 12b, we work our way through steps 46~52; wiring up the fuse panel, installing and wiring up the EZR Extruder and buttoning up the upper part of the printer.
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
In Parts 12a and 12b, we work our way through steps 46~52; wiring up the fuse panel, installing and wiring up the EZR Extruder and buttoning up the upper part of the printer.
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
***********************************************************************
I am working with Geeetech to see if I can get some coupon codes to give out, but if you would like to pick one of these up for yourself now, the best deals going on it are:
BangGood (Currently $440.99 USD as of this video):
bit.ly/2FCdZ7W (affiliate link)
GearBest (Currently $470.43 as of this video):
bit.ly/2jmcEtj (affiliate link)
Or from Geeetech direct (Currently $479.00 as of this video):
http://www.geeetech.com/large-volume-geeetech-a30-wifi-3d-printer-p-1025.html. (non affiliate link)
***********************************************************************
A30 Assembly Manual:
http://www.geeetech.com/Documents/A30%20Assembly%20Manual.pdf
A30 User Manual:
http://www.geeetech.com/Documents/A30%20User%20Manual.pdf
Geeetech A30 Forum:
http://www.geeetech.com/forum/viewforum.php?f=65&sid=5184b2048d0cb002b2042e90e0def53c
***********************************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
*********************************************************
All prints for this video were done on the Robo 3D R2 using experimental build plates of my own design (hence the bad adhesion and warping on some of these…). You can learn more about the Robo R2 here:
bit.ly/2HQX1b6
For this video I was using AMOLEN Multicolor Gradient Rainbow PLA, available here from Amazon:
amzn.to/2KfwrHd
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
The Carriage Assembly Sub-manual is here:
seemecnc.dozuki.com/Guide/Carriage+Assembly/59
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
You can follow along in the manual here:
seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en
This was a long process, so the video came out a little longer than I had hopped. Apologies in advance for a few places where the down-cam lost track of the work or ended up with a great shot of the back of my head.
*********************************************************
If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black
If you aren’t up for a kit, it is also available pre-built here:
seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled
If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here:
Kit: goo.gl/P5PQCA
Assembled: goo.gl/UNxKtW
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D
This was printed using Proto-Pasta Coffee HTPLA on my Prusa Mk3 printer.
*********************************************************
Proto-Pasta is not currently making the Coffee Aromatic HTPLA, but you can still get is from Matter Hackers here:
bit.ly/2HB73uj
All Thingiverse model files shown in my videos will be saved to this collection:
http://www.thingiverse.com/Crussty/collections/practical-printing-channel
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon: http://amzn.to/2gQC6Wg
MatterHackers: goo.gl/JZLovC
Gear Best: goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
facebook.com/Practical3D


