Uploaded November 2022 | Updated September 2026, 2 weeks ago
Day 5 (2026) 👉 youtu.be/I6BooYAo1mg
New to Fusion 360? This is a brand new 2023 version of Day #5 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at ProductDesignOnline.com/courses
Full course on YouTube: bit.ly/30daysUpdated
**Support our free tutorials**
PayPal - paypal.com/paypalme/productdesignonline/30
Patreon - patreon.com/productdesignonline
Say Thanks w/Coffee - buymeacoffee.com/pdo
COMPUTE TYPES EXPLAINED ➞ productdesignonline.com/d5
CHECKLIST FOR BEGINNERS ➞ bit.ly/f360checklist
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE (& Hit the Bell!)
bit.ly/sub-right-now
TIMESTAMPS
00:00 - Day 5 Model an Ice Cube Tray in Autodesk Fusion 360
00:36 - Sketch the overall shape with a rectangle
01:21 - Create New Sketch on Planar Surface in Fusion 360
02:38 - How to Extrude Cut in Autodesk Fusion 360
03:29 - Add Taper Angle to Extrude in Fusion 360
04:19 - How to use Rectangular Pattern in Fusion 360
05:54 - How to Shell with more than one Face in Fusion 360
07:10 - Create a Midplane Construction Plane in Fusion 360
07:37 - Sketch the Lip of the Ice Cube Tray in Fusion 360
08:46 - Sweep the Lip of the Ice Cube Tray in Fusion 360
09:23 - Next Lesson in this course
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk
Day 5 (2026) 👉 youtu.be/I6BooYAo1mg
New to Fusion 360? This is a brand new 2023 version of Day #5 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at ProductDesignOnline.com/courses
Full course on YouTube: bit.ly/30daysUpdated
**Support our free tutorials**
PayPal - paypal.com/paypalme/productdesignonline/30
Patreon - patreon.com/productdesignonline
Say Thanks w/Coffee - buymeacoffee.com/pdo
COMPUTE TYPES EXPLAINED ➞ productdesignonline.com/d5
CHECKLIST FOR BEGINNERS ➞ bit.ly/f360checklist
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE (& Hit the Bell!)
bit.ly/sub-right-now
TIMESTAMPS
00:00 - Day 5 Model an Ice Cube Tray in Autodesk Fusion 360
00:36 - Sketch the overall shape with a rectangle
01:21 - Create New Sketch on Planar Surface in Fusion 360
02:38 - How to Extrude Cut in Autodesk Fusion 360
03:29 - Add Taper Angle to Extrude in Fusion 360
04:19 - How to use Rectangular Pattern in Fusion 360
05:54 - How to Shell with more than one Face in Fusion 360
07:10 - Create a Midplane Construction Plane in Fusion 360
07:37 - Sketch the Lip of the Ice Cube Tray in Fusion 360
08:46 - Sweep the Lip of the Ice Cube Tray in Fusion 360
09:23 - Next Lesson in this course
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk
