Broken Tusk GarageI'm a sucker for the Star Wars challenges! So when @RebelBaseBuilds issued a challenge to create a diorama around a door I was in before I knew what I wanted to do!
This is my entry. Technically I have 3 doors (4 if you count the rear hatch of the Phantom 2):
A large docking bay 75 opening because I needed the hole for room to put my Phantom 2
The Anzellans doorway and Anzellans from James collection on Etzy (Rebel Base Builds).
And a door inspired by @propsandvillainy's life size door he has in his mancave as an entrance to the bounty hunters guild.
Star Wars Door Diorama Challenge Entry Fly throughBroken Tusk Garage2024-01-23 | I'm a sucker for the Star Wars challenges! So when @RebelBaseBuilds issued a challenge to create a diorama around a door I was in before I knew what I wanted to do!
This is my entry. Technically I have 3 doors (4 if you count the rear hatch of the Phantom 2):
A large docking bay 75 opening because I needed the hole for room to put my Phantom 2
The Anzellans doorway and Anzellans from James collection on Etzy (Rebel Base Builds).
And a door inspired by @propsandvillainy's life size door he has in his mancave as an entrance to the bounty hunters guild.
#makesomething #3dprinting #starwarsdiorama #resinprintingOne of the Coolest Details! #disneywish Star Wars Kids areaBroken Tusk Garage2024-09-26 | There are maybe a half a dozen creatures in the Star Wars area on the Disney wish. This one happens to be my favorite. To get him to show you have to turn a dial and then just step back and wait. This is the kids area, so we only got to see it during an open house hour one morning.
#starwars #disneyadultsHyperspace Lounge on Disney Wish #disneycruiseBroken Tusk Garage2024-09-22 | My wife ordered the "Spire Sunset" (Batuu) while at the bar in the Hyperspace Lounge on the Disney Wish. Half of what we spent on board was in the lounge 😲! My favorite was the "Golden One" (Moons of Endor). Not as cool of presentation, but wow was it tasty. Expext to pay 16 to 20 credits per drink.
#starwars #disneywish72 Ounce Steak Challenge at Big Texan Amarillo? Wasnt me!Broken Tusk Garage2024-09-21 | Couldn't bring myself to do it. Did take on the 36oz Big Duke ribeye. After that, glad I did chose not to. Great food at the Big Texan in Amarillo. Have eaten there multiple times and this was the first time someone did the challenge while we were there.
#roadtripDisney Wish - Star Wars Cargo Bay Walk ThroughBroken Tusk Garage2024-09-16 | To be a kid again! Got to tour the Star Wars kids area called the Cargo Bay while on the Disney Wish Cruise Ship. With the majority of the guests on shore, my wife and I were the only ones in the room.
#starwars #disneywish #roadtripMagic Kingdom - Mickeys Not So Scary - 9/8/24Broken Tusk Garage2024-09-11 | Got rained out at Mickey's Not So Scary Halloween. Still had fun. Watched the fireworks from our room.
#roadtrip #disneyadults #magickingdomDavid Boreanaz at Fanboy Expo Orlando 9/7/24Broken Tusk Garage2024-09-08 | After 70,000 plus at Dragon Con, having on 2500 at Fanboy Expo Orlando was an interesting change of pace. David Boreanaz put on a very entertaining panel.
#fanboyexpo #fanboyexpoOrlando #roadtripDragon Con - Bob and Linda Belcher CosplayBroken Tusk Garage2024-08-31 | Brought out Bob and Linda Belcher 2 nights I. A row. Bob needs to loosen up, so a few drinks were had.
#cosplay #bobsburgers #dragoncon501st GA Display - Dragon Con 2024Broken Tusk Garage2024-08-30 | Best time to get a Pic without interruption? 8 am Friday was a great time!Dragon Con 2024 - Wednesday Night at the MariottBroken Tusk Garage2024-08-29 | #dragoncon #party #cosplayersStar Wars Model kits Waiting to be Built!Broken Tusk Garage2024-08-21 | Getting ready to build some dioramas using kits I have collected this last year. Let me know if you have a scene or scenes I should do?
#starwars #makesomething #dioramabuild #modelkitsDisneyland - Rise of the Resistance #galaxysedgeBroken Tusk Garage2024-08-17 | Had to trim half a second to fix it not being a #Shorts vid. Another part of Rise of the Resistance ride in #batuuwest #galaxysedge in Disneyland. The visuals are awesome and really need to be seen in person!
#roadtrip #disneyadults #batuuwest #disneylandSabine Wren Right Paudron - #starwarsbuildBroken Tusk Garage2024-08-16 | With Natasha Bordizzo going to Dragon Con my wife and I discussed getting something signed. Not sure if we will (autographs are not really our thing) but we will be prepared if minds are changed.
#makesomething #3dprinting #propbuilding #resinprinting #ahsoka #cosplayRise of the Risistance - #galaxysedgeBroken Tusk Garage2024-08-07 | If your in the back during the beginning of Rise of the Resistance ride, watch out the back window!
#starwars #galaxysedge #batuuwest #riseoftheresistance #disneylandHad to stop by Randomland while visiting DisneylandBroken Tusk Garage2024-08-05 | We were to early to check into our hotel so visited some Orange Circle antique stores. Got to see @justinscarred's booth "Randomland"!
#disneyland #randomlandWhats he doing? Leave my Droid alone.Broken Tusk Garage2024-08-05 | #starwars #makesomethingGalaxys Edge - Batuu West Millennium FalconBroken Tusk Garage2024-07-30 | Got to get up close to the Milenium Falcon while everyone else was running to Rise of the Resistance!
#starwars #galaxysedge #batuuwest #millenniumfalcon #disneylandChimichanga Chaser - California AdventureBroken Tusk Garage2024-07-29 | Sugar rush Deadpool drink at the freestyle station in Pym's Test Kitchen.
#disneyland #californiaadventure #deadpool #avengerscampusOur Bob and Linda Cosplay Debut #sdcc2024Broken Tusk Garage2024-07-27 | Had a blast walking around San Diego Comic Con as Bob and Linda from #bobsburgers! Left the kids at home with Teddy.
#cosplay #bobsburgerscosplay #makesomething #sdccSnagged a Blind AL Pack #jackinthebox #deadpoolBroken Tusk Garage2024-07-24 | Snagged a Blind all pack from Jack In The Box at San Diego Comic Con! They said it's limited to 4000.
#deadpool #jackinthebox #sdcc2024SDCC Cosplay PackingBroken Tusk Garage2024-07-24 | Times up! Pacing for San Diego Comic Con.
#cosplay #sdcc #bobsburgers #muppetsTurning a 3d printed Helmet into a DioramaBroken Tusk Garage2024-07-23 | Scout trooper with speeder bike diorama build! This was a fun break up to a busy time right now. The helmet isnt perfect and had a lot of flaws which made it perfect to turn into something else!
#3dprinting #starwars #buildtodisplay #makesomething #starwarsbuild #starwarsdioramaBiker Scout Helmet DioramaBroken Tusk Garage2024-07-13 | After my mini helmet diorama came out so well, I decided to make another. This time using a full size helmet that did not print so well.
#makesomething #3dprinting #starwarsdioramaEwok AT-ST DioramaBroken Tusk Garage2024-07-01 | Ewok attacking an AT-ST Diorama built in a 1/2 scale 3d printed Scout Trooper Helmet.
#makesomething #starwarsbuild #3dprinting #starwarsdioramaSummer 2024 Con Tickets ArrivedBroken Tusk Garage2024-06-27 | So not prepared for San Diego or Atlanta, but pumped we have our tickets!
#comicon #dragoncon #concrunchEwok Diorama Inspiration Find #makesomethingBroken Tusk Garage2024-06-26 | Just started a new diorama based on seeing a Star Wars micro galaxy At-St.
#starwars #3dprinting #starwarsbuildStill One of My Favorite Builds! #starwarsbuildBroken Tusk Garage2024-06-15 | Been a year but this has to be some of my best work. Black Series scale Phantom 2 from Star Wars Rebels that I modeled up myself. About 4 feet long and 2 feet tall.
#makesomething #3dprinting #starwars #blackseriesfiguresBobs Burgers - How I Made a Linda Belcher Cosplay HeadBroken Tusk Garage2024-06-13 | Hey! long time no upload. :( Lets get back into it with a Linda Belcher Cosplay head for my wife. I started this on March 27th but it got derailed for work. This will go with my Bob head that I will be wearing at San Diego Comicon in July! You can see how I built Bob here: youtu.be/kFAUCj8yHSA
#3dprinting #cosplay #bobsburgersMall of America Visit. #legoBroken Tusk Garage2024-05-27 | First time at Mall of America. The Lego store is calling! #legoaddict #roadGreeted on Return to AZ after work trip.Broken Tusk Garage2024-05-19 | ...University of Michigan Themed Scout Trooper HelmetBroken Tusk Garage2024-05-09 | Star Wars Scout Trooper Helmet painted to look like a University of Michigan Football helmet. This is a house warming gift I made at the last minute for my brother to go in his Michigan themed pool room.
#makesomething #starwarsbuild #3dprintingStar Wars Imperial General Helmet BuildBroken Tusk Garage2024-04-19 | Need to add some greeblies. Liking how this is turning out.
#makesomething #starwarsbuild #3dprinting #propbuilding #cosplayStar Wars Generals Helmet #3dprintingBroken Tusk Garage2024-04-16 | Adding another helmet to my collection. Inspired by the one worn by General Veers in The Empire Strikes back during the attack on Hoth.
#makesomething #starwarsbuild #cosplayStar Wars Generals Helmet #3dprintingBroken Tusk Garage2024-04-06 | Next helmet to add to my collection started. Star wars imperial army General Veers. But thinking about maybe turning it into a version of Grand Admiral Thrawn.
#starwars #makesomething #3dprinting #propbuildingFirst World 3D Printing Problems #3dprintingBroken Tusk Garage2024-04-02 | Always fun and games when the hotend dies over 85% of the way through a long print.
#makesomething #starwarsbuild #fdmprinting #firstworldproblemsBob and Linda Cosplay #bobsburgersBroken Tusk Garage2024-04-01 | Cosplaying Bob's Burgers this year with a twist! Trying to be way ahead this year. Bob and Linda are 99% ready! Have an idea of cool mashup? Let me know in the comments.
#makesomething #3dprinting #propbuilding #cosplay #bobsburgersHow and Why I Use Modeling Paste to Finish A Scout Trooper Helmet #3dprintingBroken Tusk Garage2024-03-29 | Lets delve into a simple and effective method for smoothing out 3d prints. While this method may not be for everyone, if you have any issues like allergic reactions to acetone, this is a very suitable replacement to using spot putty. I have tried many different methods and had no preference until I got a rash while using acetone (this after using it for many years) which led me to picking this as my go to.
There are many Scout Trooper Helmet files available online. This is the one that I bought and used: cults3d.com/:537069
0:00 Beginning 0:50 First coat of Modeling Paste 3:05 Why I no longer use Acetone 3:30 Final coat of Modeling Paste 4:45 Sanding 6:00 Primer paint 7:00 Repeat on Mask and Visor 8:15 Prep Visor Lens 10:30 Add Snout Pieces 12:15 Assemble Parts 13:10 Decals 13:55 Complete Helmet(s)
#makesomething #propbuilding #cosplay #starwars #starwarsbuildScout Trooper Finished #makesomethingBroken Tusk Garage2024-03-29 | Scout trooper helmet pretty much done, on to next project. Any suggestions?
#propbuilding #starwars #3dprintingRoTJ Inspired Scout Trooper Helmet #starwarsBroken Tusk Garage2024-03-26 | Working on another Star Scout Trooper Helmet. This will get the OG white paint like in Return of the Jedi. Hindered by weather on painting. Hopefully thr rain will stop soon!
#makesomething #3dprinting #starwarsbuildStar Wars Legends Storm Commando Helmet #3dprintingBroken Tusk Garage2024-03-20 | Turned a 3d printed scout trooper helmet into a storm commando from Star Wars legends.
#starwars #makesomething #propbuilding #cosplayStar Wars Storm Commando Helmet WIPBroken Tusk Garage2024-03-19 | My previous short showed how I use modeling paste when smoothing prints. Lets just say I got a little bit of negative feedback not on my technique but the contrition of the top of the helmet to begin with. Here is how it's looking so far and "why" the top was not in the best shape when I started!
#starwars #makesomething #3dprinting #propbuilding #scouttrooper #cosplayAcrylic Modeling Paste for smoothing 3d PrintsBroken Tusk Garage2024-03-17 | Working on another Scout Trooper Helmet, here is how I fill layer lines using Acrylic Modeling Paste.
#makesomething #3dprinting #propbuilding #starwarsStar Wars Bad Batch Wrecker Helmet - Painted #starwarsbuildBroken Tusk Garage2024-03-13 | Got this file for free off of Printables website. Credit for the file goes to Jace1969.
Quick paint by hand. Yep it's crooked 🙄.
#makesomething #3dprinting #propbuilding #starwars #badbatchWorking on. Wrecker helmet from The Bad Batch #starwarsbuildBroken Tusk Garage2024-03-11 | First print using the fresh batch of PLA+. Other than being a tad small for my head but will look good when painted!
#makesomething #3dprinting #propbuilding #badbatch10 Rolls of PLA+ ready to print! #3dprintingBroken Tusk Garage2024-03-08 | Came just in time! I was down to my last roll.
#makesomething #propbuilding #cosplayHow To Make a World Between Worlds Artifact From Star WarsBroken Tusk Garage2024-03-07 | Whether you recognize it from Luthen's shop in Andor, or in the last season of Rebels, the Lothal artifact from the Jedi Temple is a cool and easy build. I made mine from a left over piece of 1 inch thick pink insulation foam and paint I already had. Not counting waiting on paint to dry, this took less than 2 hours of my time.
#makesomething #propbuilding #starwars #starwarsbuildBob and Linda Version 2 - About 15 Percent smallerBroken Tusk Garage2024-03-02 | #cosplay #bobsburgers #sdcc2024 #dragonconRepairing My Elegoo Mercury XBroken Tusk Garage2024-02-27 | Fixing the Wash and Cure Mercury X from Elegoo is easy. Getting the parts, not so much (thanks USPS). You will need a set of Allen wrenches and a Philips screwdriver. I do suggest not being as heavy handed as me, but I got the job done and didn't break anything in the process! That's a plus.
This is not a paid endorsement. I bought my Mercury X station in March of 23 and after 8 months a power surge killed the power supply and both control boards. I reached out to Elegoo to find how to buy replacement parts but they were replaced under warranty.
#3dprinting #firstworldproblems #elegoomercuryXReplacements have arrived!Broken Tusk Garage2024-02-26 | My Elegoo Mercury wash and cure station were hit with a power surge and fried! It killed both control boards and the power supply. 3 months later replacements arrived!
#3dprinting #resinprinting #firstworldproblemsThe Glue Sticks I UseBroken Tusk Garage2024-02-20 | Glue I use on my cosplay builds.How I made a Bob Belcher Cosplay Head for San Diego ComiconBroken Tusk Garage2024-02-20 | I have wanted to do Bob and Linda heads for Comicons for a long time! So while looking to level up my cosplay skills, I made it my mission to craft Bob and Linda Belcher costume heads for Comic-Con! Say goodbye to half-hearted outfits and hello to a more authentic character transformation. Not to mention, it saves me from having to shave!