Micro Turning Follow Up (2mm Goblet) Yuval Lahav Woodturning 2018-01-30 | I wasn't done after turning the two goblets in my last video... I had to have another try at a micro turning, using a special tool. I published a little of the process on Facebook, but was compelled to come up with a better Youtube version. So enjoy the soothing quality of my voice explaining a little bit of this micro turning.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:All are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
VEVOR Plainer Unboxing and first Impressions Yuval Lahav Woodturning 2022-07-27 | Unboxing a plainer (or planer) that was sent to me by the e-commerce site #VEVOR, assembly and comments, first usage and testing, and generally being talkative in my natural surroundings and enjoying a new and welcome addition to my arsenal of tools (that almost everyone can afford). This plainer would come in handy in a big project I've started working on, and chances are it will be making an appearance in more then one video in the future.If you found my presentation irresistible, you can always get your own (motor wattage may vary between American and European versions, as well clearing capacity) plainer either on the American site, or the Italian site, and using the discount code will give you a 20$ discount on the American site or a 25€ discount on the Italian site:Use VVYUVAL to save €25 off on Italy shopVEVOR Pialla Elettrica Filo: bit.ly/3zh7KFOUse VVYUVAL2 to save $20 off on the US shopVEVOR Thickness Planer: bit.ly/3RMvVDePlease help the channel (and me) out by sharing this video on social media, and of course by liking, subscribing and just being positive in general.Chapters:0:00 Intro0:11 Welcome & taking0:30 Building the stand2:11 Unboxing6:08 Features7:32 Final assembly10:09 Replacing cover11:32 Aligning & adjustments12:00 Plaining12:46 First impressions15:21 Pros and cons18:39 Installing rubber feet19:42 Conclusions
Woodturning Flicking Pen In Wengé Yuval Lahav Woodturning 2022-05-30 | Finally getting into the shop to do some turning, so of course I'll kick it off with something simple, like a Wengé twisting spiral flicking pen. The 3-4 hours it should have taken to make this pen stretched into 3 week due to work and family, but hey, I got a pen out of it, so well worth it!Please help the channel (and me) out by sharing this video on social media, and of course by liking, subscribing and just being positive in general.Songs in this video are:David Mumford - The Right Train Meet Me TomorrowAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!
Makers Central 2022 Show and Tell Yuval Lahav Woodturning 2022-05-10 | Coming back to Makers Central 2022 after being cooped up for a couple of years was a breath of fresh air in a lot of people lives.I came back from the even with a new spirit for creating and turning, and with a few gifts and treats.Mentioned in this video are some great creators and content makers:@Nick Zammeti @Leona Fay Woodturning@Templeboy Turnings @Anna B Workshop @Dave.G.Designs @Luther Woodworks@Lothian Woodworks @Wayne the Woodturner @Heikki Makes @Makers Central @Make it Soph @Sean Evelegh @jimmydiresta @Bobby Duke Arts @colinfurze And from Instagram:www.instagram.com/surreymakers, www.instagram.com/shopdogworkshop, www.instagram.com/valeries_crafty_attic, www.instagram.com/wayne_bigfoot_woodcraft, www.instagram.com/emmafvsmithFacebook: facebook.com/YuvalLahavWoodturning Instagram: instagram.com/yuval_lahav_woodturning Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!
Woodturning Yew three legged carved and textured bowl Yuval Lahav Woodturning 2021-06-04 | Moving along with my exploration of technique and form, I'm trying to combine a few different elements into this small Yew bowl, and this time I'm adding some free hand texturing, something I've never done to this extent.The cutters and piercers I'm using with my Dremel can be found here, if you order them, make sure to mention I sent you ;)http://www.woodart-products.co.uk/4_cutters.phpPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Yellowheart and Indian Rosewood pierced three legged lidded box Yuval Lahav Woodturning 2021-05-19 | It's been over a year since my last video, Covid-19 had effected us all in all manners of ways, one of those is lack of inspiration. That streak is broken, and in the past couple of days, I've been turning again, and this lidded box of Yellowheart and Rosewood is my coming back project.Cutters used in this video: http://www.woodart-products.co.uk/4_cutters.phpMake your own sander video: youtube.com/watch?v=qu99WPgKpCQPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
I Built a Potters Throwing Wheel Out of a Broken Treadmill Yuval Lahav Woodturning 2020-04-30 | In this video I show the hows and whys of my newly built potters throwing wheel which I've made out of pieces of my wife's broken down treadmill and some pieced out of an old washing machine. I hope that soon enough I'll have some throwing videos where I will make a fool out of myself.Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Robotime Terminator M870 Best Gift Idea (Full version) Yuval Lahav Woodturning 2020-04-17 | In this week video I build one of Robotime's models, the Terminator M870, a 5 rounds, 10 shot, rubber bands shooting shotgun! It's the first time I build a laser cut model, and it was so much fun to build I feel I have to recommend the experience. This would be a perfect gift for children and adults for any occasion. This is the full version of the build, so buckle up and simmer down to watch how I fully build this model.Save 20% off sitewide from Robotime using discount code: YT20robotimeonline.com/products/justice-guard-terminator-m870-lq501?yl Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Robotime Terminator M870 Best Gift Idea (Short version) Yuval Lahav Woodturning 2020-04-17 | In this week video I build one of Robotime's models, the Terminator M870, a 5 rounds, 10 shot, rubber bands shooting shotgun! It's the first time I build a laser cut model, and it was so much fun to build I feel I have to recommend the experience. This would be a perfect gift for children and adults for any occasion. This is the short version of the build, so at a quick pace, watch as I complete this model in under 10 minutes!!Save 20% off sitewide from Robotime using discount code: YT20robotimeonline.com/products/justice-guard-terminator-m870-lq501?yl Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Songs in this video are: David Mumford - The Right Train Meet Me Tomorrow All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Natural Edge Pierced Yew Bowl Yuval Lahav Woodturning 2020-04-01 | This week, for your ASMR viewing pleasure, turning a natural edge pierced Yew bowl. No talking, no music, no subtitles to distract you, just plain old working that wood from start to finish.Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Shop Improvements Contour Jig Yuval Lahav Woodturning 2020-03-21 | Sharing in detail how I've made the contouring jig in my last video (Woodturning Indian Rosewood and Ash latticework Double Bowl) out of stuff I had around the shop when I need to copy the curve of a bowl. This would be a first of a series of video detailing different DIY shop improvements.Patreon: patreon.com/YuvalLahavFacebook: facebook.com/YuvalLahavWoodturningTweeter: twitter.com/YL_WoodturningInstagra: instagram.com/yuval_lahav_woodturningInstructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Indian Rosewood and Ash latticework Double Bowl Yuval Lahav Woodturning 2020-03-21 | In this week's video we'll be turning a double layered bowl, the base will be made out of Indian Rosewood (smells so good!!) and the decoration layer will be made out of "simple" Ash. We'll be using latticework like pattern pierced into the secondary Ash bowl.© Fabiosa Media Verified. All rights reservedPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Tweeter: twitter.com/YL_Woodturning Instagra: instagram.com/yuval_lahav_woodturningInstructables: http://www.instructables.com/member/yuvallahav Songs in this video are: David Mumford - The Shelby BluesCullah - Comfort To YouJeffrey Philip Nelson - Shame On MeAll are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Olive Ash and Ebony Not so Perfect Box Yuval Lahav Woodturning 2020-03-12 | Stuck at home (I live in central Italy, and it's Corona virus high season) I'm looking for stuff to do in the shop to pass the time. It's been a while since I've turned a Celtic knot, so I thought I might do a quick project with one, no calculations and markings to get it all perfect, just some cuts, some glue, some ripping, and some turning! Using a left over Olive Ash black, and some Ebony slab I had in the shop for years also means I'm cleaning up my wood pile! This box was so much fun to turn, there's nothing like those bi colour shavings all over the shop's floor.Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Songs in this video are:Cullah - LucyKaty Kirby - Every TimeJosh Woodward - ReleaseDavid Mumford - Mockingbird All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Pierced and Hollowed Out Maple Egg Yuval Lahav Woodturning 2020-03-08 | Taking my piercing skills (that I've just acquired) to the next level, I chose an extra hard project (because why not go big??!), A pierced and hollowed out curly Maple egg. That took me a few good hours, I can tell you that. But I learned my lesson, hollow out before you pierce!! Or not, you might like a good challenge.© Fabiosa Media Verified. All rights reservedPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning and Piercing the Filigree Tree Yuval Lahav Woodturning 2020-03-01 | A few months ago I've ordered a set of wood piercing cutter, but I was shy using them. I didn't know how. So I took the plunge and just tried it, and guess what? I managed to transform an old project into something really special. Check out what and how I did the Filigree Tree using woodturning and piercing.Where I got my piercing bits - http://www.woodart-products.co.uk/4_cutters.phpPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Songs in this video are: David Mumford - LoverJosh Woodward - Thanks For Coming All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Fixing my Dremel 3000 Yuval Lahav Woodturning 2020-03-01 | While working on my Filigree Tree project (see link below) my Dremel 3000 Broke down. After a little search on google and youtube, I managed to fix it my self, and here is how I did it.Woodturning and Piercing the Filigree Tree - youtu.be/0XOUAI0rW9gPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Mini Skews for Makers Central 2020 Yuval Lahav Woodturning 2020-02-26 | Today we'll be woodturning 80 mini skews as exchange coins for the Maker Central 2020 event!! If you want one of these mini skews, all you have to do is attend Makers Central 2020, find me there, and have a coin or trinket of your own to exchange for one of mine!!Get your tickets to the event here: makerscentral.co.uk/BUY-TICKETSThe page where I bought this little printer (EUROPEAN SITE, might be outdated):http://eud.dx.com/product/neje-high-power-500mw-diy-laser-box-laser-engraving-machine-laser-printer-black-blue-844401772#.VwweUqR97GgThe page where I bought this little printer (GLOBAL SITE - USA, might be outdated):http://www.dx.com/p/neje-high-power-500mw-diy-laser-box-laser-engraving-machine-laser-printer-black-blue-401772Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Cypress Turned Carved Pyrography Bowl Yuval Lahav Woodturning 2020-02-12 | So a goblet wasn't enough? Well, lets complete a set and make a bowl!! And if we're making a bowl, we might as well carve some spirals into it. And if we're carving it, we might as well also do some pyrography!! This Cypress bowl has it all!! And it even rhymes.Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Makers Central 2020!!! Yuval Lahav Woodturning 2020-02-10 | GOING TO MAKERS CENTRAL 2020!!! Come join us everyone in Makers Central 2020, May 2nd-3rd, NEC in Birmingham!!Tickets for the event - makerscentral.co.uk/BUY-TICKETSPatreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Yew No Rose Engine Tactile Goblet Yuval Lahav Woodturning 2020-02-06 | Going into the shop head on after a long long while, I've decided to warm up by making a goblet. Yes, a boring old goblet. With a twist. And some carving. And some singing in the background just for good measure. Enjoy the process!!Patreon: patreon.com/YuvalLahav Facebook: facebook.com/YuvalLahavWoodturning Instructables: http://www.instructables.com/member/yuvallahav Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Yew Wormhole Hollow Form Yuval Lahav Woodturning 2019-08-13 | After my last attempt at turning a wormhole form, I took it to the next level, both in design and in technique, and I barely managed to bring to a successful finish, but it was done!This Yew wormhole hollow form took the most I had in tool control and thinking outside the box.Patreon: patreon.com/YuvalLahavFacebook: facebook.com/YuvalLahavWoodturningInstructables: http://www.instructables.com/member/yuvallahavFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Yew Funnel Form Fail / Lesson Yuval Lahav Woodturning 2019-08-10 | While trying to learn how how to turn a delicate wormhole / funnel shape I made a few good calls, and a critical bad call on my part which resulted in a broken piece. Lets make a good lesson out of it!Patreon: patreon.com/YuvalLahavFacebook: facebook.com/YuvalLahavWoodturningInstructables: http://www.instructables.com/member/yuvallahavFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Charnwood Micro Clean MC420 Quick Review Yuval Lahav Woodturning 2019-05-06 | Patreon: patreon.com/YuvalLahavFacebook: facebook.com/YuvalLahavWoodturningInstructables: http://www.instructables.com/member/yuvallahavSongs in this video are:All are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Olive Hat Yuval Lahav Woodturning 2019-04-26 | After a few months of not being able to spend time in the shop, I took a day off and took my time. 8 hours of work (including breaks and a lot of sanding) I managed to make this Olive hat, suitable for children under 5... Next time I hope to have a larger piece for a full size hat.Patreon: patreon.com/YuvalLahavFacebook: facebook.com/YuvalLahavWoodturningInstructables: http://www.instructables.com/member/yuvallahavFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning a Cypress Hat mock-up, educational! Yuval Lahav Woodturning 2019-01-09 | Before trying to make a hat out of a beautiful large piece of Olive I want to try a small scale mock-up in Cypress, so I could practice the process. It was a good lesson.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Makers Central 2019 Teaser Yuval Lahav Woodturning 2019-01-05 | I'm coming to Makers Central 2019! I will be doing a live demo at Record Power Booth, and I will be turning at Turner Wood Products booth for the duration!Tickets for the Event - makerscentral.co.uk/BUY-TICKETS.Record Power - recordpower.co.uk/.Turners Wood Product - turnerswoodproducts.com/products.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Easy Wood Tools Unboxing Yuval Lahav Woodturning 2018-08-01 | Unboxing of my newly won easy wood tools, and addressing the carbide vs. traditional tools Facebook debate.My friend Chris Channel - youtube.com/user/customchevy03Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Making Shavings / Spindle Practice Session Yuval Lahav Woodturning 2018-07-13 | I had to make some black shavings to fill up some cracks in an Olive bowl I'm working on, so I chucked up a spindle piece of African Blackwood and started chipping away. Since it was already set up, I never miss a chance to practice my spindle turning, so I give you 17 minutes, non stop, no edits and no time lapse, of one of these practice sessions.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Ebony Ring and finally buffing! Yuval Lahav Woodturning 2018-06-09 | Returning from Makers Central I bought some ring blanks, and breaking a long channel silence, I thought a small and quick project would be just the thing to start creating again.Check out Turners wood products:turnerswoodproducts.com/productsPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Armistead - OlympiaJosh Armistead - RainbowsAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Makers Central Update! Yuval Lahav Woodturning 2018-05-02 | Makers Central is about to be upon us, and I needed to put in a few words and update you guys about what is going on, and will go on, at the event.Makers Central site - http://www.makerscentral.co.ukMakers Central Tickets - http://www.makerscentral.co.uk/BUY-TICKETSPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Goblet Upgrade + Stickers! Yuval Lahav Woodturning 2018-02-26 | If you've seen my latest completed project (the goblet), then there was a small part of it I wasn't wholly happy about, so I took to the shop this cold morning, and taking the risk of ruining the goblet, I gave it a little upgrade. Gone is the nipple which was there since I wasn't sure the arms of the stems will be solid enough to support the weight of the cup. Now that I know they could, the goblet takes its final form. I also show off a few presents and a couple of new stickers for my wall!!Gord Rock channel - youtube.com/user/GordRocks1Wayne Clasper channel - youtube.com/user/clas1rwCarlo Westerhof channel - youtube.com/channel/UCZ_Aysx9uvd_mEAbPqTozSwPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Armistead - RainbowsAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Experimental Goblet in Sycamore and Tamboti Yuval Lahav Woodturning 2018-02-17 | I'm always trying to learn something new, I believe that by trying, and failing, you learn the best. Sometimes, you succeed where you thought you will fail, and then you make something you were not expecting to. This spiraled stemmed goblet is just that, completely unexpected.© Fabiosa Media Verified. All rights reservedPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Armistead - OlympiaTinyfolk - Illinois IllinoisCud Eastbound - Microwave SafeAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Micro turning challenge Yuval Lahav Woodturning 2018-01-21 | As part of a creator's comunity on Facebook, we like to set challenges to ourselves to celebrate our hobby, and this is the result of one such.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Woodward - BranchesAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!
Woodturning Oak and Hamp vase (fixed) Yuval Lahav Woodturning 2018-01-20 | Well, Youtube has messed something up and I had to reupload this old video (my 8th woodturning video), so this is the second of two "Blast from the past" videos I'm reuploading at the moment. It's an oldie, but a goody ;)Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:David Mumford - The Right Train Meet Me TomorrowJosh Woodward - Little Tomcat Instrumental VersionAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward
Woodturning Opepe Winged Bowl / Vase (fixed) Yuval Lahav Woodturning 2018-01-20 | Well, Youtube has messed something up and I had to reupload this old video (my 4th woodturning video), so this is the first of two "Blast from the past" videos I'm reuploading at the moment. It's an oldie, but a goody ;)Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Woodward - CherubsDavid Rovics - Burn it DownRobo - Ahora que estamos en pieKathleen Martin - El Preso Numero NueveAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward
Olive Kinetic Bowl Q & A Yuval Lahav Woodturning 2018-01-15 | After I've been asked many questions on social media and in comments about my kinetic Olive bowl, I compiled this Q&A video.To support me and my channel on Patreon: patreon.com/YuvalLahavWhere I bought the balls from: https://www.decathlon.it/3-bocce-tempo-libero-id_8322077.htmlSander video: youtube.com/watch?v=qu99WPgKpCQFacebook: facebook.com/yuval.lahav.16Instagram: instagram.com/yuval_lahav_woodturningTwitter: twitter.com/YL_WoodturningInstructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Ken Rogoway, Michael L. Kent, Tom Millward
Woodturning Kinetic Olive Bowl Yuval Lahav Woodturning 2018-01-13 | After trying to find what to do with a few metal balls I bought at "Decathlon" sporting goods store, I came up with a free spinning bowl. This is by far one of the most interesting projects I've worked on, and I think the result speaks for itself.Please consider becoming my Patreon: patreon.com/YuvalLahavFinish was supplied by turners wood products:turnerswoodproducts.com/productsBalls are from here - https://www.decathlon.it/3-bocce-tempo-libero-id_8322077.htmlFacebook: facebook.com/yuval.lahav.16Twitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningInstructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Pierce Murphy - VersaillesDavid Mumford - LoverAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Michael L. Kent, Tina Minahan,
Charnwood Viper 3 Chuck Review Yuval Lahav Woodturning 2017-12-30 | After buying the Charnwood Viper 3 chuck system at UKIWS 2017 and using it for a few projects, it was time for me to say a few words on the subject of chucks. I also compare a few of the features (and accessories) to the well known and trusted Nova G3 chuck.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:Michael L. Kent, Tom Millward
Woodturning Dogwood Olive Ash Hanging Box Yuval Lahav Woodturning 2017-12-23 | I've decided to take on a challenge and try to make a hanging box. The idea came from the work of Byron Young (see link below).I used Dogwood for the base, Olive Ash for the box, Mahogany for the lid, and African black wood for the finial.Byron Young:http://tamarackfoundation.org/directory-listing/byron-youngFinish was supplied by turners wood products:turnerswoodproducts.com/productsRotary sander how to:youtube.com/watch?v=qu99WPgKpCQPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Cullah - Comfort To YouCullah - Please Bring Me ShelterAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
New Shop Update Yuval Lahav Woodturning 2017-12-18 | And sometimes you just need a change. So you take it out on your shop!! When my wife told me they are throwing away some shelves and a table from a shop she was hired to design, I had to get in on the action!!Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning 2017 Christmas Ornament Challenge Yuval Lahav Woodturning 2017-11-25 | This is my entry to Carl Jacobson and Alan Stratton's 2017 Christmas ornament challenge. This project (and video) were inspired by the work of Malcolm Tibbetts, you can find his excellent video, "The Power of Seven", here:youtube.com/watch?v=V1viPrqDxpoPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Kelly Latimore - Mt PrincetonKelly Latimore - Leaving RoomsBen McElroy - OakAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Segmented Vase Yuval Lahav Woodturning 2017-10-05 | Well, I once said I want at least one of everything on my channel, so you all knew this was coming sooner or later. My very first segmented turning. Might be my last, but probably not...Wood-you believe it facebook page - facebook.com/Wood-You-Believe-It-177551562605290Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Jeffrey Philip Nelson - Shame On MeJeffrey Philip Nelson - Woman Around to BlameJeffrey Philip Nelson - ShotglassJeffrey Philip Nelson - Say WhatAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Pink Ivory and Palmera Bottle Stoppers Yuval Lahav Woodturning 2017-09-09 | A quick and simple project if you have an hour on your hands, I'll be turning a couple of his and hers bottle stoppers out of Pink Ivory and Palmera!Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Josh Woodward - River Went DryAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Update, Projects and Stickers! Yuval Lahav Woodturning 2017-09-06 | Just an update on coming up projects, some new stickers to go on the wall of fame, and talking some more about Makers Central event in May, 2018.Makers Central website - http://www.makerscentral.co.ukStickers, in order:youtube.com/user/GaAustringerhttp://www.cswa.co.ukyoutube.com/channel/UCcw42XS1mtwQBgM1oH5sPaQ/feedPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Spalted Oak Hollow Form Yuval Lahav Woodturning 2017-08-07 | Starting to work down all my UKIWS loot, I'm going for a spalted Oak hollow form, with an African Black Wood as the lid and finial. I also crushed some turquoise stone to powder to fill in some cracks and voids with some CA glue.Enjoy!Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Cullah - Comfort To YouKrestovsky - Silent FilmAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Look at all that LOOT! Yuval Lahav Woodturning 2017-07-25 | Mostly for those who couldn't make it to the event, I run down a few of the items I bought (no one gifted me anything larger than a pan blank or gave me a discount for a mention or a good review) at UKIWS 2017. We will also do a sticker round if you pull through to the end.Leon Britton : facebook.com/Wood-You-Believe-It-177551562605290Wood you believe it (Also Leon) : youtube.com/channel/UCrio4PtzSRL2BogLd3R4mdA/videosBrendan McAreavy (baconsoda): youtube.com/user/baconsodaCharnwood (Viper 3 chuck set): charnwood.netYorkshire Grit: http://yorkshire-grit.comKeith Barrow: youtube.com/user/kasbarrowSimon Hope (cutter): http://hopewoodturning.co.ukDave Capper-Sandon: youtube.com/channel/UCHoefXGGzyZvtIsj0t_-9wgNick Zammeti NZ WoodTurning: youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymAMakers Central: youtube.com/channel/UCJSreLjUhGr927JMvtRIKXALe PicBois (Pat Lap): youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UASteven Twydell: youtube.com/user/stevo15771Peter Freitag: youtube.com/user/PeteTGIFPaul Willmore: youtube.com/channel/UCwg0qwOVCXgT9-Ilne1LfAwKarol Kolanowski (KK Make): youtube.com/user/polishedwoodworkingJimson's Stuff: youtube.com/channel/UC6h82LH3PtdiSHaj_7f09FgThe Woodworking Shed: youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNgPatreon: patreon.com/YuvalLahaFacebook: facebook.com/yuval.lahav.16Instagram: instagram.com/yuval_lahav_woodturningTwitter: twitter.com/YL_WoodturningInstructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
2017 UKIWS + Stickers! Yuval Lahav Woodturning 2017-07-10 | It is that time of the year again, putting stickers up in my shop. Finally took the time to stick these, and also, a call to come and enjoy UKIWS 2017, July 15-16th, Coventry UK.UKIWS site - http://www.ukiws.co.ukMike Waldt - youtube.com/user/TheCymruBoyWoodslee Summercraft - youtube.com/channel/UCSTl-BQomeXoJqevZ_MxpOwDaniel Vilarino - youtube.com/user/DanielVilarinoHeath Knuckles - youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQKeith Barrow - youtube.com/user/kasbarrowPatreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Mulberry Natural Edge Bowl Yuval Lahav Woodturning 2017-07-04 | Lets be honest. Every single time I'm turning a natural edge bowl, I swear it will be my last one. So much work on sanding, so hard to finish up, but hey, when you see fine piece of bark, you just have to go with your heart.Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:David Mumford - The Dog SongWe Is Shore Dedicated - Gladiator Coin TossKathleen Martin - El Preso Numero NueveAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Rotary Sander Yuval Lahav Woodturning 2017-05-24 | Making your own orbital was never simpler. Take a look and head to your shop and try it out!Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianMiguel Sanchez video - youtube.com/watch?v=kAjD9aMG39Q&feature=shareCustomChris channel - youtube.com/user/customchevy03Drill angel attachment - https://www.amazon.it/gp/product/B013ORYBMI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1Sanding pads page, 1 of 2 - banggood.com/it/2-Inch-50mm-Hook-and-Loop-Sanding-Pad-14-Inch-Shank-with-60pcs-100-to-2000-Grit-Sand-Paper-Kit-p-1089070.html?rmmds=myorderSanding pads page, 2 of 2 - banggood.com/it/100pcs-2-Inch-50mm-Sander-Disc-80-to-3000-Grit-Sanding-Polishing-Pad-p-1078700.html?rmmds=myorderSongs in this video are:Kelly Latimore - Mt PrincetonAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
Woodturning Optional Foot and Plate for Padauk Box Yuval Lahav Woodturning 2017-03-24 | Continuing my last project, I decided there is something more I can add to the mix, so a foot and a wavy plate it is!Patreon: patreon.com/YuvalLahavTwitter: twitter.com/YL_WoodturningInstagram: instagram.com/yuval_lahav_woodturningFacebook: facebook.com/yuval.lahav.16Instructables: http://www.instructables.com/member/yuvallahavPinterest: it.pinterest.com/yuvallahavReddit: reddit.com/user/aforeignitalianSongs in this video are:Jeffrey Philip Nelson - Shame On MeKaty Kirby - Come Back to NashvilleWood Spider - Empty HomeAll are available for free from http://www.freemusicarchive.orgFeel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!These are the good people who kindly support me on Patreon:TOMTURNS.COM, Michael L. Kent, Tina Minahan,
