Fully Automated Dust Collection powered by Arduino // How To | I Like To Make Stuff I Like To Make Stuff 2024-10-17 | Fully Automated Dust Collection powered by Arduino // How To | I Like To Make Stuff
How to Avoid Mistakes With a Unique Tile Backsplash I Like To Make Stuff 2022-12-01 | I wanted a super unique design for a tile backsplash but I needed to put time into the prep to make it right! Save 40% on your SimpliSafe system. Visit https://SimpliSafe.com/ILTMS to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.🛠 Join The Maker Alliance to directly support the channel and access exclusive videos, discounts, and our private Discord community! themakeralliance.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#ILikeToMakeStuff #diy #interiordesign About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!How to Avoid Mistakes With a Unique Tile Backsplashyoutu.be/jYdqsa3of2oI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff00:00 Introduction00:32 Choosing a design00:57 Using a computer to lay it out01:18 Fake the tiles02:21 Get the actual tile, check measurements02:45 Draw a full size layout03:12 Take measurements of EVERYTHING08:12 Set the tile
Its Time To Upgrade Your Workbench! (With Build Plans!) I Like To Make Stuff 2022-11-10 | Out with the old & in with the new - I made a better workbench and you can too with our plans! Save up to 40% on your SimpliSafe system. Visit https://SimpliSafe.com/ILTMS to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days. 👇 Get the digital plans 👇https://ilt.ms/shop/product/torsion-box-assembly-table-digital-plans/📱 Scan the QR code at 14:15 to see the table in your space!🧰 Tools and materials for this build: kit.co/iliketomakestuff/torsion-box-assembly-table🛠 Join The Maker Alliance to directly support the channel and access exclusive videos, discounts, and our private Discord community! themakeralliance.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms# woodworking #diy #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Can I Make a Better Workbench?youtube.com/watch?v=jGLdnayct6AI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Gallery Walls: Easier Than You Think. I Like To Make Stuff 2022-10-27 | We wanted to spruce up a boring room by adding a gallery wall. By adding some display boxes, we transformed this space into a beautiful museum for past projects. Using some simple plywood you can transform a boring space into a beautiful gallery. Gallery Wall Projects Playlist: youtube.com/playlist?list=PLice_sU_6RfiX2fdOHaQShpIOIsw7dwyQ🛠 Join The Maker Alliance to directly support the channel and access exclusive videos, discounts, and our private Discord community! themakeralliance.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#gallerywall #ILikeToMakeStuff #diy About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Gallery Walls: Easier Than You Think.youtu.be/WaFTYdffTncI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a fake hand with FRANK IPPOLITO! (Hollywood prop maker) I Like To Make Stuff 2022-10-14 | A Hollywood prop maker cast my hand to look like Luke’s hand from Empire Strikes Back. Save up to 40% on your SimpliSafe system. Visit https://SimpliSafe.com/iltms to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.Luke's Lightsaber videoyoutube.com/watch?v=TLoO5MnKhCE&t=6sFrank Ippolito Linksthingergyinc.comyoutube.com/watch?v=P2O7vyKnYfoinstagram.com/thingergy_inc/?hl=entwitter.com/Thingergyfacebook.com/Thingergy🛠 Join The Maker Alliance to directly support the channel and access exclusive videos, discounts, and our private Discord community! themakeralliance.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/luke-s-handkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#starwars #lightsaber #ILikeToMakeStuff About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Making a fake hand with FRANK IPPOLITO! (Hollywood prop maker)youtu.be/KS8dRkuaMUoI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Can I Recreate the Original Star Wars Lightsaber? I Like To Make Stuff 2022-09-29 | I love the lightsaber Obi-Wan gives Luke. Can I take a vintage Graflex flash handle and make it the same way they did for the original movies?🛠 Join The Maker Alliance for extra videos, community, and discounts. You will also help to directly support the channel! themakeralliance.comLightsaber Guidebook PDF: wannawanga.com/lightsaber-guidebookSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#ILikeToMakeStuff #lightsaber #starwars About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Can I Recreate the Original 1977 Star Wars Lightsaberyoutube.com/watch?v=TLoO5MnKhCEI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
The Table That Took 8 Years To Make I Like To Make Stuff 2022-09-23 | I finally did a collab with Jimmy Diresta & David Picciuto! Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.Jimmy's Video: youtube.com/watch?v=Dk3LBJKGlBsDavid's Video: youtu.be/Rhg8D3k5pUwTotalBoat 4-minute Epoxy Adhesive: totalboat.com/product/4-minute-epoxy-fast-setting-clear-adhesiveTotalBoat Thixo Fast Cure Epoxy: totalboat.com/product/thixo-fastSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#makingitpodcast #ILikeToMakeStuff #collab About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!The Table That Took 8 Years To Makeyoutu.be/AEFGtirt-rQI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Spend The Day With Mark Rober? Absolutely! [Behind The Scenes] I Like To Make Stuff 2022-09-15 | 🛠 Join for early access and extra BTS: themakeralliance.comEver wonder what a day messing around with Mark Rober would be like? Come let us show you. We had so much footage from our Giant Pin Toy video with Mark Rober that we put it all together in this Behind the Scenes video.Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#markrober #behindthescenes #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Want To Spend The Day With Mark Rober? Absolutely I Do. | BETWEEN THE BUILDSyoutu.be/BX7bTIRpPwAI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Surprising Mark Rober With a Giant Toy I Like To Make Stuff 2022-09-08 | We had the silly idea to make a giant pin impression toy for our buddy, Mark Rober. Using some PVC sheets, 1,000 PEX tubes, and a week of 3d printing, we made a life-size pin wall that now lives at Crunch Labs! Contest has closed, but check out the Maker Alliance http://iltms.com/joinJoin The Maker Alliance to support the channel!themakeralliance.comAdditional music provided by Blue Wednesday:soundcloud.com/bluewednesdaySubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#MarkRober #ILikeToMakeStuff #CrunchLabsAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Surprising Mark Rober With a Giant Toyyoutu.be/WgCVSdXYR1wI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Record Anything From Anywhere! I Like To Make Stuff 2022-09-01 | We were challenged to make a complete podcast recording setup that fit inside a travel case for Pat Flynn. Using some clever organization and some beautiful walnut, we made him a box that can hold everything you need to record a podcast anywhere you go! shop.iltms.comCheck out Pat's podcast at smartpassiveincome.com/shows/spiSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #PatFlynnAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Ditch the Studio, Record Anywhere (with Pat Flynn!)youtu.be/FTn4WpfzuGwI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a 3d Print Look Like REAL METAL! | Thermal Detonator Prop I Like To Make Stuff 2022-08-18 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.Grab this model from Thingiverse and make your own!: thingiverse.com/thing:2065383Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#ILikeToMakeStuff #diy #props #painting #cosplay #starwars #3dprintingAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Painting a 3D printed prop to look like metal. Is it worth it??youtu.be/r5VvQHERWlII Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Secret 4-Player Arcade (with build plans!) I Like To Make Stuff 2022-08-11 | For those of you who may not want an arcade cabinet in your living room, we've got you. We made a nice piece of furniture that hides a 4-player arcade in plain sight! You can make this amazing Secret 4-Player Arcade using the digital plans linked below!Secret 4-Player Arcade Digital Plans and Templates: iliketomakestuff.com/shop/product/secret-4-player-arcade-digital-plansSupplies for this build (with affiliate links):kit.co/iliketomakestuff/4-person-secret-arcadeLoad RetroPi on a Raspberry Pi: youtu.be/brQ09-PkWVoSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my Top Videos: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USE (affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #arcade #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Secret 4-Player Arcade (with build plans!)youtu.be/k014ldBncXAI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Using Your Scraps to Organize Your Shop I Like To Make Stuff 2022-07-28 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more! De-clutter your space by using scrap wood to hang your clamps and tools on a wall.Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and in depth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Using Your Scraps to Organize Your Shopyoutu.be/XoZbEf3sGksI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Organized Lumber Storage (with build plans!) I Like To Make Stuff 2022-07-21 | Go to our sponsor betterhelp.com/iltms for 10% off your first month of therapy with BetterHelp and get matched with a therapist who will listen and help.My shop needed more robust material storage for sheet goods, boards, and tools. Using some 2x4s, you can make this Lumber Storage Rack to better organize your shop. GET THESE DIGITAL PLANS!: iliketomakestuff.com/shop/product/lumber-storage-digital-plansSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms[Playlist Specific Hashtag] #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about![Video Title][Video URL]I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Starting To Look Like A Car Again | Karmann Ghia Restoration I Like To Make Stuff 2022-07-14 | I have turned a corner and started adding new body panels to the Karmann Ghia! I'm cautiously optimistic about the progress I'm making and becoming more comfortable with the tools. I'm so excited that it looks like a non-rusty version of itself!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#karmannghia #Car #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Starting To Look Like A Car Again | Karmann Ghia Restorationyoutu.be/TCAJfI638hUI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Can Adding Ridge Vents Cool Your House? I Like To Make Stuff 2022-07-07 | Does adding a ridge vent to your roof cool down your attic? Does that vented attic help cool down your house? Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit simplisafe.com/ILTMS to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#home #diy #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Can a Ridge Vent Help Cool Your House?youtu.be/O0e7nRS86VEI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Make Your Own Concrete Countertops (From a Kit!) I Like To Make Stuff 2022-06-23 | We helped Anthony pour his own concrete countertops using the Z Counterform kit from Concrete Countertop Solutions. Come see how to make pour-in-place kitchen countertops for a fraction of the costs of traditional counters. It's more accessible than you think. shop.iltms.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Concrete Countertop Solutions: bit.ly/3Od3lZFConcrete Calculator: bit.ly/3HHC0MEkit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms# diy #kitchen #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Easy & Affordable Concrete Countertops (From a Kit!)youtu.be/YqlhEmJ4axcI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Make a Prop Sword From Cheap Foam Panels | Adventure Time Sword I Like To Make Stuff 2022-06-16 | Need a cosplay sword or a display prop? We made a cartoon sword from Adventure Time out of cheap insulation foam and a hot wire cutter. New Customers Exclusive - Get the Creality Ender 3d pro for $99 after coupon: https://micro.center/217abbCheck out Micro Center’s 3d printers and filament: https://micro.center/4c1d8dBrowse Micro Center’s Amazon store filament: https://micro.center/f10333Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Hot Wire Cutter: amzn.to/3tFjYouTotalBoat Epoxy Resin: bit.ly/TotalBoatEpoxykit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#props #ILikeToMakeStuff #AdventureTimeAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Make a Prop Sword From Cheap Foam Panels | Adventure Time Swordyoutu.be/LbH5optc4kII Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Overcoming My Fear of Machining Metal I Like To Make Stuff 2022-06-09 | I've been afraid to use the Bridgeport and South Bend Lathe, my two machining tools. To get over this hesitation, I'm making a project using the two machines; a T-track stop block. Come see how you can get over a fear of starting something new by making something awesome. Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#machining #ILikeToMakeStuff #diyAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!I'm Afraid of Machiningyoutu.be/hhjA37tHwdgI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a Backyard Climbing Wall | DIY Outdoors I Like To Make Stuff 2022-05-26 | I wanted to make a climbing wall tower out at the farm to teach my kids bouldering and climbing. Using some construction lumber and some outdoor plywood, I show you how to make an awesome backyard climbing wall. Get Plans, Shirts, and more at shop.iltms.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#wallclimbing #DIY #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Making a Backyard Climbing Wall | DIY Outdoorsyoutu.be/xrXjJaTloYoI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
I Cant Believe I Made This! | Sofa Table with Basic Tools I Like To Make Stuff 2022-05-19 | Lacking tools, a shop, and confidence, we helped Meighan build a beautiful sofa table as her first project! Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #BeginnerProjectsAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!"I Can't Believe I Made This!" | Basic Tools Projectyoutu.be/t5ZPzHX6dkkI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Sliding Room Divider (Inspired by Star Wars) I Like To Make Stuff 2022-05-12 | We wanted a cool looking room divider that could block out bright light. Using our CNC and some rollers, we made a sliding room divider straight out of Star Wars! Check out the Fusion 360 online course: fusion360formakers.com use the code MAKECOOLSTUFF10 to get 10% off. Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #homerenovation About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Sliding Room Divider (Inspired by Star Wars)youtu.be/alNoxXzaSxsI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Prototyping a New Product! I Like To Make Stuff 2022-04-28 | We want to turn an old project into a NEW PRODUCT! Come see how to refine an idea, source materials, and simplify construction when making a new product. New Customers Exclusive - Get the Creality Ender 3d pro for $99 after coupon: https://micro.center/779af2 Offer valid in-store only, no purchase necessary, new customers only Check out Micro Center’s Selection of Maker/STEM Products: https://micro.center/fd4deaBrowse Micro Center’s 3D Printers: https://micro.center/33b075Browse Micro Center’s Amazon store filament: https://micro.center/d54699Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #engineering About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Prototyping a New Product!youtu.be/q-uZKGlFZ70I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
I Might Have Ruined My Karmann Ghia I Like To Make Stuff 2022-04-21 | I may have went too far in the Karmann Ghia restoration. It's going to take all my focus and attention to come back from these recent setbacks, can I do it? I hope so. shop.iliketomakestuff.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/karmann-ghia-restorationkit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#KarmannGhia #ILikeToMakeStuff #CarRestorationAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!I Might Have Ruined My Karmann Ghiayoutu.be/0fzWHRbmwxEI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Make Your Own D&D Dice Towers | Table Top Games I Like To Make Stuff 2022-04-14 | Dice towers are fun projects for the role-playing gamer in your life. You can make them out of anything, come see how to make your own! Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#DungeonsandDragons #CriticalRoll #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Making Custom Dice Towers for Table Top Gamesyoutu.be/F8l_kK_ddgoI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a Collapsible Painting Stand I Like To Make Stuff 2022-04-07 | I needed to make a large painting stand, but it had to fold away to save space in the shop. Come along while we solve problems, adjust plans, and make something awesome. Check out Send Cut Send to help make your custom parts. bit.ly/35ISLrR Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#Paintbooth #ILikeToMakeStuff #CarRestorationAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Making a Collapsible Painting Standyoutu.be/Jq_5d6FAIBUI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Organizing the Mess In Your Trunk I Like To Make Stuff 2022-03-31 | Plywood and containers can make a huge difference in your vehicle! A portion of this video is an ad for State Farm. DISCLAIMER: Individual premiums and budgets will vary by customer. All applicants subject to State Farm underwriting requirements. Call or go to statefarm.com to get a quote today. Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Containers: amzn.to/3K0OMGc amzn.to/38h8ks5kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#Organization #ILikeToMakeStuff #diyAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Organizing the Mess In Your Trunkyoutu.be/QTZWtMbOcVMI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Sign up for our monthly newsletter! Get coupons, extra content, and exclusives! Iltms.com I Like To Make Stuff 2022-03-24 | ...
Accent Wall with an Air Quality Sensor I Like To Make Stuff 2022-03-17 | Make a beautiful accent wall with an added air quality sensor! Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/ILTMS to learn more and thanks to SimpliSafe for sponsoring this video!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comDOWNLOAD THE CODE: iliketomakestuff.com/AccentWallCodeTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/accent-wall-with-warning-lightskit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#accentwall #ILikeToMakeStuff #CNCAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Accent Wall with an Air Quality Sensoryoutu.be/hGsoc67E9B8I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Full Shop Air Compressor Setup I Like To Make Stuff 2022-03-10 | Want to run air compressor lines throughout your shop? We did all the research so you do have to! Come see how you can have a full shop air compressor setup. Thanks to Send Cut Send for sponsoring a part of this video. Check out their metal cutting services at bit.ly/35ISLrRSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/improved-air-delivery-systemkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#aircompressor #ILikeToMakeStuff #DIYAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Full Shop Air Compressor Setupyoutu.be/sV2QuLxIlrcI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Hiding a Gaming Table in Plain Sight (with build plans!) I Like To Make Stuff 2022-03-03 | If you like playing table-top games, cards with friends, or doing puzzles, this Gaming Table gives you the ability to store them inside a great looking table. Thanks to LG for hooking us up with the newest CineBeam projector! Check out more at bit.ly/3vrZbGuGET THESE DIGITAL PLANS!: iliketomakestuff.com/shop/product/gaming-table-digital-plansGET THE ARDUINO CODE: github.com/iliketomakestuff/gamingTableSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/hidden-gaming-tablekit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#D&D #ILikeToMakeStuff #GamingTableAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Hiding a Gaming Table in Plain Sight (with build plans!)youtu.be/Lj4hjtHxTu8I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a Barn Door with a Resin Art Panel I Like To Make Stuff 2022-02-17 | Making a Barn Door in your house is a great beginner woodworking project, but I wanted to spice it up by adding a cool resin art panel. New Customers Exclusive – Get a Free 128gb Flash drive and 128gb MicroSD Card at Micro Center: https://micro.center/58e117 #adSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#woodworking #resin #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Making a Barn Door with Resin Art Panelyoutu.be/oHxs9iIDmCII Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Loser Does the Work Between The Builds I Like To Make Stuff 2022-02-10 | This week, the guys have a lot work to do in the new building, but no one wants to do it. Save 20% on your SimpliSafe security system when you sign up for an Interactive Monitoring plan and get your first month free. Visit https://SimpliSafe.com/ILTMS to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#betweenthebuilds #ILikeToMakeStuff #OfficeRenovationAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Loser Does the Work \\ Between the Buildsyoutu.be/-YhavsId_aMI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
My Car Flipped Over!! Building a rotisserie for my VW Karmann Ghia I Like To Make Stuff 2022-02-03 | I built a rotisserie to flip the body of my Karmann Ghia. It needs a lot of body work and a car rotisserie is the best way to access it all. Come see the process! Thanks to Send Cut Send for sponsoring a part of this video. Check out their metal cutting services at bit.ly/35ISLrRSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#CarRestoration #ILikeToMakeStuff #KarmannGhiaAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!My Car Flipped Over!! (On Purpose)youtu.be/bUVFici8lpYI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Can 3d Printing Improve Your Car? I Like To Make Stuff 2022-01-27 | 3d Printers can make anything, including improvements to your car! New Customers Exclusive – Get a Free 128gb Flash drive and 128gb MicroSD Card at Micro Center: https://micro.center/88a6a8 Check out Micro Center’s selection of 3D Printers: https://micro.center/884a09Read More at: iliketomakestuff.com/can-3d-printing-improve-your-carSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms[Playlist Specific Hashtag] #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Can 3d Printing Improve Your Car?youtu.be/SndYymulUe4I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Should You Buy a CNC or a Laser? I Like To Make Stuff 2022-01-20 | Thinking about investing in a CNC or a Laser Cutter? We show you the benefits of both while making a custom sign. Save 20% on your SimpliSafe security system and your first month is free when you sign up for Interactive Monitoring. Visit https://SimpliSafe.com/ILTMS to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosCheck out Brian's work! instagram.com/briankesingerGet the Free Tusken Raider Sign Digital Files: bit.ly/TuskenRaiserFilesGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#cnc #lasercutter #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Should You Get a CNC or a Laser? | I Like To Make Stuffyoutu.be/0Bk6WVnhUrkI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Real Life Minecraft Torch (Color Changing Bulb!) I Like To Make Stuff 2021-12-30 | Want to bring Minecraft into the real world? We show you how to make a Real Life Minecraft Torch from wood and acrylic that can change colors! Come see how you can make one of these cool Minecraft torches for yourself! http:shop.iltms.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#Minecraft #ILikeToMakeStuff #diyAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Real Life Minecraft Torch | I Like To Make Stuffyoutu.be/4ZDXNgkiPckI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
From Gross to Gorgeous in a Weekend I Like To Make Stuff 2021-12-23 | We've partnered with The Home Depot and Kohler to fully transform our old Gas Station Bathroom. Even the nastiest bathrooms can look amazing with a little work and some new fixtures. Check out the list below for everything we used in this project! Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Maxstow Aluminum Frameless Surface-Mount Med Cabhttp://homedepot.sjv.io/c/2560540/1187906/8154Wellworth Classic Complete Solution Round Toilethttp://homedepot.sjv.io/c/2560540/1187907/8154Memoirs 2-Light Polished Chrome Sconcehttp://homedepot.sjv.io/c/2560540/1187908/8154Rubicon 36 in. Bath Vanity Single Basin Vanity Tophttp://homedepot.sjv.io/c/2560540/1187909/8154Hexagon Tile: homedepot.com/p/Merola-Tile-Porto-Savona-Hex-9-7-8-in-x-8-5-8-in-Niagara-Porcelain-Floor-and-Wall-Tile-11-56-sq-ft-case-FCDPSVNX/312682905kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#BathroomMakeover #ILikeToMakeStuff #TileAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Transforming A Gas Station Bathroom | I Like To Make Stuffyoutu.be/4T9t0PbXrP8I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making Christmas Nutcrackers | Build-off Challenge I Like To Make Stuff 2021-12-09 | The guys are doing another holiday Build-Off Challenge, but this time, they're making Nutcrackers! New Customers Exclusive – Get a Free 128gb Flash drive and 128gb MicroSD Card at Micro Center: https://micro.center/419e4d Check out the Micro Center Custom PC Builder: https://micro.center/0142b9 Join the Micro Center Community: https://micro.center/48baaeSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#nutcracker #ILikeToMakeStuff #challengeAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Christmas Nutcracker Build-Off Challenge! | I Like To Make Stuff[Video URL]I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
A Flexible Way to Showcase Your Cool Stuff | I Like To Make Stuff I Like To Make Stuff 2021-12-02 | I made this display cabinet, or hutch, to show off my prize collectibles. The french cleat system allows you to showcase odd sized items all together, like trophies, fine china, or cool vintage toys. Make one using our plans at bit.ly/3GbE4dASubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Cabinet Lighting Kit: amzn.to/3ExdzPLkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #cabinetAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!A Flexible Way to Showcase Your Cool Stuff | I Like To Make Stuffyoutu.be/2_LiO-BDm5EI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making a Massive Backyard Zipline! I Like To Make Stuff 2021-11-25 | Want a gigantic zipline in your backyard? We show you how to make a zipline launch pad platform up in the trees that is safe and sturdy. Check out instagram.com/iliketomakestuff this weekend for ORANGE FRIDAY! 25% OFF everything we offer; merch, plans, Fusion 360 course!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Zip Line Kit: amzn.to/3CIaF905/16" Steel Cable: amzn.to/3r0VGEYCable Puller: amzn.to/3cAPuLlWire Grip for Cable Puller: amzn.to/3nG58vdkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#zipline #DIY #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Super-Sized Zip Line Launch Pad | I Like To Make Stuffyoutu.be/m0zBPiU0P4AI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
DIY Recording Studio at Home for Cheap I Like To Make Stuff 2021-11-11 | Want a recording studio in your home and don't have a lot of money? Come see how we did it! Save 50% or more on your SimpliSafe security system during their biggest sale of the year! Visit simplisafe.com/iltms to learn more!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/new-recording-studiokit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #homestudio #ILikeToMakeStuffAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!DIY Home Recording Studio for Cheap | I Like To Make Stuffyoutu.be/EqKMGA03KYYI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Hiding Secrets on a Simple Whiteboard I Like To Make Stuff 2021-11-04 | Need a way to hide your secret ideas? We made a simple white board that can also hide your secret messages! This is a really simple project that only requires a few specialty items that anyone can do, come see how! iliketomakestuff.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#secret #ILikeToMakeStuff #diyAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Hiding Secrets on a Simple Whiteboard I Like To Make Stuffyoutu.be/IQtbc-wTOmAI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Making an Essential Tool Kit | Leather Working I Like To Make Stuff 2021-10-21 | I wanted a way to keep all my essential car repair tools with me in case I broke down. I made a tool wrap out of leather and canvas. Check it out! Thank you to BetterHelp for Sponsoring this video! Go to https://BetterHelp.com/ILTMS to get 10% off your first monthSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-leather-working-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #Leather #ILikeToMakeStuff About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Where Do You Keep Essential Tools? | I Like To Make Stuff | Leather Workingyoutu.be/AuORHkzC7qcI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Were Moving Out! | I Like To Make Stuff I Like To Make Stuff 2021-10-14 | We Are Moving! We bought a commercial building to expand our capabilities! Come check out the new space and what we're doing with it. Visit https://SimpliSafe.com/ILTMS to learn more and to get at least 30% off your SimpliSafe security system!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #commercialbuildingAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!We're Moving Out! | I Like To Make Stuffyoutu.be/jpuVeOmaiiYI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Storing a Massive Amount of LEGO Bricks | I Like To Make Stuff I Like To Make Stuff 2021-10-07 | My kids outgrew our previous LEGO table, so we're upgrading our LEGO storage to hold a massive amount of bricks! You can make your own using our plans, linked below. Check out the amazing offer from KiwiCo at kiwico.com/iltms50 #sponsoredSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Plastic Bins: target.com/p/sterilite-deep-clip-box-clear-with-green-latches/-/A-13794803#lnk=sametabkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#LEGO #ILikeToMakeStuff #diyAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Upgrading Our LEGO Storage | I Like To Make Stuffyoutu.be/FUzDlytTUrwI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
DIY LEGO Brick Sorter | I Like To Make Stuff I Like To Make Stuff 2021-09-23 | I prototyped a LEGO Brick Sorter out of plywood, laser-cut acrylic, and some 3d printed parts. This will be a part of a larger LEGO table I'm building in the future, but this mechanism is so cool, come check it out! Check out the Maker Alliance at http://ilt.ms/joinSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosPetesquared Lego Sorter Video: youtube.com/watch?v=zN4hL0uuTUYGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #LEGOAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!DIY LEGO Brick Sorter | I Like To Make Stuffyoutu.be/i2NQU3jrMXwI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Upgrade Any Cabinet with DIY Pull Out Drawers | I Like To Make Stuff I Like To Make Stuff 2021-09-16 | To maximize the organized space in our deep cabinets, I built some easy pull out drawers. To start comparing quotes and simplify insurance-buying, check out Policygenius: policygenius.com/ILTMS. Thanks to Policygenius for sponsoring this video!Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Rockler's Dovetail Jig w/Dust Collection: rockler.com/rockler-s-complete-dovetail-jig-with-dovetail-jig-dust-collector-combo-offerkit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #KitchenRemodelAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Upgrade Any Cabinet with DIY Pull Out Drawers | I Like To Make Stuffyoutu.be/UqxkchUx-n0I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Ripping Apart My Karmann Ghia | I Like To Make Stuff I Like To Make Stuff 2021-09-09 | It is time to completely dismantle the Karmann Ghia! This full-restoration project had to start by tearing it down so that I can start building it back up the right way. Come follow along with this on-going saga of Rebuilding My Dream Car. Subscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#KarmannGhia #ILikeToMakeStuff #CarRestorationAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Ripping Apart My Karmann Ghia | I Like To Make Stuffyoutu.be/3nVcOGpfJBUI Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
How To Make a Modern Stair Railing | I Like To Make Stuff I Like To Make Stuff 2021-09-02 | At Anthony's house, we made a modern wood and steel stair railing. He used Fusion 360 to design a beautiful stair railing that wasn't that difficult to make. Come see how we did it! Rockler is your go-to source for woodworking tools and supplies. rockler.com #adSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):Portable Drill Guide with Vise: rockler.com/rockler-portable-drill-guide-with-visekit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#HomeRenovation #ILikeToMakeStuff #StairRailingAbout I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!How To Make a Modern Steel Stair Railing | I Like To Make Stuff[Video URL]I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
Would These Fake Windows Fool You? | I Like To Make Stuff I Like To Make Stuff 2021-08-19 | We needed some additional light in a basement bedroom, so we made some light panel windows that fade in and out like the real thing! You can make these false windows in any room using off-the-shelf items. Get Plans, Merch, and Courses at http://iliketomakestuff.comSubscribe: http://bit.ly/ILikeToMakestuffSubscribeSecond Channel: http://bit.ly/iltms-2Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideosGet digital plans, cool merch, and indepth articles at iliketomakestuff.comLearn 3d modeling in Fusion 360 with our online course:fusion360formakers.comTOOLS & SUPPLIES WE USED(affiliate links):kit.co/iliketomakestuff/light-panel-windowskit.co/iliketomakestuff/my-woodworking-toolskit.co/iliketomakestuff/shop-safety-gearWant to support ILTMS? The Maker Alliance gets exclusive content and more... http://www.iliketomakestuff.com/joinFOLLOW:http://instagram.com/iliketomakestuffhttp://twitter.com/iliketomakestufhttp://facebook.com/iltmsMUSIC: http://share.epidemicsound.com/iltms#diy #ILikeToMakeStuff #homerenovation About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!Would This Fake Window Fool You? | I Like To Make Stuffyoutu.be/GDeEuzKXCH4I Like To Make Stuffhttp://www.youtube.com/Iliketomakestuff
