SolidWorks CSWA practice examDan Abbott2026-11-20 | SolidWorks CSWA practice examSketchingDan Abbott2023-03-15 | This a demonstration on how to use grid paper for orthographic sketching when the part can't fit on the sheet at a t1:1 scale. I did it for my Print Reading class at Southern Maine Community College at the request of a student.Configuration Table Glitch SolidworksDan Abbott2022-12-07 | Whether this is an actual glitch or a change in default behavior, I don't know, but when you create a configuration table in SolidWorks 2022, use it to create a variety of configurations, save the file, and then open the file, the table is no longer populated with the parameters used to create the configurations when you show the table. You can repopulate the table by double-clicking on the "all parameters" button at the bottom of the configuration table.Using a PDF as an external reference in AutoCADDan Abbott2022-12-04 | Short video for my AEDD100 class in print-reading at Southern Maine Community College showing how you can use AutoCAD to work with PDF files.Class Recap for 11 30 2022 CAD GraphicsDan Abbott2022-12-01 | Zoom did not record the CAD Graphics class on 11/30/2022, so I recorded this recap covering the last assignments: primary auxiliary, secondary auxiliary, and civil site plan drawings.OFFSET SECTION AUTOCADDan Abbott2022-11-26 | This a video for my CAD Graphics class at Southern Maine Community College on approaches to the offset assembly section assignmentComposite ProfileTolerance FrameDan Abbott2022-11-16 | This is brief explanation of how to interpret composite profile tolerances.Reading a Nautical ChartDan Abbott2022-11-16 | ...Attaching Profile to Path for Swept Solid in SolidWorksDan Abbott2022-11-14 | ...Fixed vs Floating parts in SolidWorks AssemblyDan Abbott2022-11-03 | Sometimes when creating assemblies in SolidWorks, you'll bring in a first part, which becomes fixed, and decide that it is not the correct part to start with, or it comes in at the wrong orientation. This is how you can fix that problem.AutoCAD center-marks: making them scale properly in viewportsDan Abbott2022-10-24 | This video demonstrates how to make centermarks scale automatically in viewports. It is a work-around and the resulting centermarks will scale, but they won't be annotative.
There have been some great improvements in AutoCAD over the years -- paper space, annotative objects, dynamic blocks -- and there have been some things that make you wonder if anyone at Autodesk has every had to produce drawings that meet the most basic standards -- the default settings in templates, particularly for dimensioning is the worst example. However, it is at least possible to correct most of those problems by creating proper dimension styles. But centermarks, when placed using the DIMCENTER command, don't scale when using an annotative dimension style in a viewport with a scale other than 1:1.
I had assumed that the CENTERMARK and CENTERLINE commands introduced long after other objects were made annotative, but nope. Even worse, the default setting for their size is relative to the size of the object you are attaching them to, which means centermarks are not consistent as required by the ASME standards.Navigation SeaTime Class Southern Maine Community ColllegeDan Abbott2022-10-15 | This video is an overview of the navigation class I presented that covered: conversions of latitude and longitude from decimal degrees to degrees, minutes, and seconds: Locating positions on a chart from lat/lon angles. Identifying the lat/lon of features on a nautical chart Determining the heading and distance of a trackline on a nautical chart. Use of a set of dividers in transferring locations and determining distances on a chart.OrthographicSketchesDan Abbott2022-10-11 | View of models for orthographic projection assignment in AEDD100 at Southern Maine Community CollegeWhen SolidWorks cant find your part filesDan Abbott2022-10-03 | I indicated that students must create a folder for each project in the Parametric Solid Modeling class at Southern Maine Community College, and that submissions require that the folder be placed in your "Please Grade" folder on your Google Drive. So many students didn't do that correctly, so there is a video showing why, and what you can do to make sure that you submit ALL necessary files for assemblies and drawings.CasterAssemblyDan Abbott2022-09-29 | This is a demonstration of the first assembly project in the Parametric Solid Modeling class at Southern Maine Community College.Boat Navigation InstrumentsDan Abbott2022-09-22 | This is an overview of the instruments on AnnaKate for use by the Seatime course at Southern Maine Community CollegeTangentPointsDan Abbott2022-09-21 | Demonstration of where tangent points occur when a line is tangent to an arc or circle, or when arcs and circles are tangent to each other.Boat Docking Undocking and Line Handling for SMCC Seatime classDan Abbott2022-09-11 | Thanks to Dave Pratt for this video. Another Pratt-Abbott production!SubmittingAssignmentsParametricModelingDan Abbott2022-09-07 | How to submit assignments in AEDD170, Parametric Modeling with SolidWorks at Southern Maine Community CollegeSecond AutoCAD Assignment: orthographic projectionDan Abbott2022-09-07 | This video demonstrates several approaches to creating an orthographic drawing of a mechanical part. It covers layer management, linetype and lineweight control, using AutoCAD design center, controlling object snaps and tracking tools, creating accurate geometry, setting up a layout for plotting, scaling viewports, inserting title blocks, creating PDF files from AutoCAD.SMCC VPNDan Abbott2022-08-29 | This is for students at Southern Maine Community College only.
If you do not have a windows computer, or do not want to install AutoCAD or SolidWorks on your personal computer for whatever reason, you can use the SMCC VPN (Virtual Private Network) to complete your assignments. Here is a video showing you how to get access to it. Let me know if you have any problems using it. We are hoping in the future to use the VPN instead of updating our on-campus labs with new hardware and software, so I'd like to know of anything we might have to address to make that happen.Intelligent Agents in BrightSpaceDan Abbott2022-08-29 | [I used this intelligent agent for a new class for the first time this semester and found that BrightSpace takes the start date literally, even if the class hasn't started yet, so set it for a date that is at least the number of days after the class starts that you select for notification about no activity. I had nine students get the notice before the class had started.]
We use BrightSpace as a learning management system at Southern Maine Community College. It has it's flaws, but overall I like it, particularly now that we are doing so many of our courses via Zoom sessions and asynchronously. One of the things I like best about it is the ability to use Intelligent Agents to keep track of student performance. The one I use checks to see if it has been more than seven days since they logged into BrightSpace or accessed the course. I then have an email sent to them indicating that if I don't hear from them within a certain period of time, I'll have to submit an Administrative Failure grade to comply with federal law, and ask if there is anything they need from me.SolidWorks Educational Download ProcedureDan Abbott2022-08-28 | This it a video showing students in classes at Southern Maine Community College (although it applies to others as well) how to download and install the educational version of SolidWorks. Note that a serial number is needed for this process, and the educational version is only to be used for learning the software, not for any commercial purpose. No specific serial number information is included in this video, you must get that from a school at which you are attending a class and that has purchased the lab pack for SolidWorks.Northern Gannet CourtshipDan Abbott2022-08-04 | 30 years ago I visited Ile Bonaventure Gaspesie park in Quebec while on a bike tour around the peninsular. I've wanted to take my birder wife there ever since, and this summer we were finally able to go to Canada and do just that for our 45th anniversary. This short video shows how a Gannet couple greet each other when one of them returns to the nest (a shallow depression more than a nest). The island is heaven for birders as it is the nesting ground for about 200,000 pelagic birds, Gannets chief among them. Avian flu is starting to take a toll, sadly. It is well worth the trip and quite an incredible experience.Short tour of inside of the Ross Technology BuildingDan Abbott2022-05-03 | This is a short video of the second floor of the Ross Technology Center for the Print Reading class at Southern Maine Community College AEDD100.Estimating a scale on a technical drawing that is printed onto a smaller sheetDan Abbott2022-05-02 | This is to help students in the Print Reading class work with PDF files the require them to print out a drawing and measure distances using a standard fractional scale or an architect's scale when the print must be reduced to fit on an A-size sheet. Since most of you are taking this class on Zoom and I can't give you the drawings plotted full size, you'll need to do this for anything that would normally be printed on B, C, D or E-sized paper.
It is easy to figure out a plot scale once you really understand the relationship between distances on the sheet and distances on the ground. It is always a ratio and can be determined with some simple division.Gear train design and layout, Mechanical Design, Southern Maine Community CollegeDan Abbott2022-04-28 | This is a video of a two hour class conducted at Southern Maine Community College on power transmission with an emphasis on gears and the techniques used to represent them graphically using SolidWorks. The class was conducted in a classroom with some students and a larger number of students on Zoom.
Note: I have at least one error in this video. The power loss in an internal combustion engine is not 30%. That is the power that is NOT lost. The power loss is 70%-88% that goes out the tailpipe and into the air as heat or noise.SolidWorks UsingGlobalVariableAcrossPartsAndInAssembliesDan Abbott2022-04-25 | You can link parts in SolidWorks together using a variety of techniques, including in-context part creation using top-down design. However, you might find it easier to link dimensions in parts via global variables and equations based on global variables, which can be saved in a text file and imported into each part.
You can also define global variables in an assembly -- either directly or by importing into the equation editor -- and assign them to individual parts that you have brought into the assembly or that you create in the context of the assembly. You can't use the global variable when you are creating the new part in a sketch, but you can give each dimension a value and then close the part. Now by double-clicking on the part, you can then edit the dimension using the equal sign and selecting the Global Variable from the drop-down.
I had a question about adding variables to the text file and then linking them to a part or assembly. That can be done, but you have to be careful not to re-import all the variables that are already in that part or assembly. You can select just the new ones. You also have to check the box for that new variable in the column between "evaluates to" and "comments" that is identified with an icon that looks like a notepad and for some reason doesn't display a roll-over. That will cause it to link back to the text file and update your part. No need to unlink all global variable. All of the variable you want linked should have that box checked off.Residential Building Framing ModelDan Abbott2022-04-10 | ...Top Down Design SolidWorksDan Abbott2022-03-28 | This is an example of how to built a top down assembly so that parts can be related to each other so updating one part will also update the others. I didn't prep it before making the video, so I am puzzling through a few things, but it will give you a pretty good idea of how it differs from Bottom Up design using something similar to the caster we used for the first project.Creating SW sheet format from a DWG fileDan Abbott2022-03-07 | SolidWorks is an excellent parametric modeling tool, but it's drawing capabilities are not well suited for 2D work like title blocks, flow charts, displacement diagrams, etc. That is why DraftSight -- an excellent DWG alternative to AutoCAD -- is such a useful tool to include with a subscription. If you have a title block in DWG format and want to create a SolidWorks sheet format from it, here's how. Then you can use it to create template files to make yourself more efficient.MakingAndSubmittingVideoAssignmentDan Abbott2022-03-04 | This is a short instructional video on how to use Panopto at Southern Maine Community College to make and submit a video to satisfy assignments in the CAD Management class.SolidWorks ANSI ISO style glitchDan Abbott2022-02-09 | There are two glitches in SolidWorks, and one default setting, that aren't correct under the ASME standards for technical drawings in the U.S, that have been around for a while and that I wish would be corrected. This is how you can correct them.Locating Under-defined Sketches SolidWorksDan Abbott2022-01-29 | How to efficiently tell if a part has any under-defined sketches in SolidWorks.Lofting the First Exercise in AEDD250Dan Abbott2022-01-26 | The first exercise in applying First Angle and Third Angle projection is based on a part that some students had difficulty creating in SolidWorks. Although you may do any project in the Mechanical Design class by sketching, if you do use SolidWorks, the geometry must be correct. Here is a video showing how to use the Loft function in SolidWorks to create that part.Acme Thread in SolidWorksDan Abbott2021-12-14 | A few students in my Parametric Modeling class asked about cutting an Acme thread in SolidWorks. The thread tool in SolidWorks doesn't have an Acme option, so you have to do it by creating a helix at the proper pitch and a profile of either the thread or the tool that would cut a thread.BubbleAnnotationAutoCADDan Abbott2021-11-24 | This video is to demonstrate a technique for creating and using bubbles on leaders in an assembly drawing in AutoCAD using an annotative block, a wipeout, a polygon, and changing the settings in the QLEADER command.Disappearing Tool Palettes - AutoCADDan Abbott2021-11-19 | Sometimes a tool palette will get pulled off the screen in AutoCAD and be impossible to find. Usually you can close any palettes that are showing and find a slight piece of it on the left or right of your screen, but if you can't, here are some suggestions for getting it back.EfficiencyTipsForArchitecturalAutoCADDan Abbott2021-11-14 | This video is for my classes at Southern Maine Community College with a few tips on using AutoCAD for architectural drawings.TitleBlockInsertionAutoCADDan Abbott2021-10-01 | ...Using scales AEDD100Dan Abbott2021-09-28 | I show you how to approach the measurement assignment for AEDD100, Print Reading at Southern Maine Community College.30 60 triangle with architectural unitsDan Abbott2021-09-18 | This is for AEDD100 at Southern Maine Community College to show how to apply the Pythagorean theorem to a 30/60 right triangle when using it to lay out a right angle in architectural units. In this case, I convert to decimal feet before calculating, but you could convert to inches instead.CountourMethodSolidWorksPartDan Abbott2021-09-05 | This is a demonstration of an alternative to creating separate sketches when creating some parts in SolidWorks. You can use a single sketch for multiple features by selecting closed contours individually.Printing Ventilator Manifolds with a FormLabs printerDan Abbott2021-08-25 | This video was made in March, 2020 as a tutorial for anyone who might have been in a position to 3D print fittings for use in a system developed by Maine Medical Center for using one ventilator to support multiple patients. The system was never needed because the protocol for treating Covid19 patients evolved over time in such a way that the need for ventilators is now easily met by hospitals in Maine.
The video was made by Corey Norman with the New Media department at Southern Maine Community College. I am uploading it to my YouTube channel because it shows the use of the resin-based FormLabs printers. We acquired an additional five of the printers for this project through donations totaling nearly $30,000, half of which came from the Maine Community College Foundation. All of the surplus printers and curing ovens have now been distributed to other colleges in the Maine Community College system for their academic use.
A the time we undertook this project, there was a great deal of anxiety about the possibility of running out of ventilators. The Maine CDC asked me to print 360 of them, which would have taken nearly two months with one printers. Monica Wood and I printed nearly 400 in just over two weeks. At the time I said I hoped they'd never be used, and I got my wish. I still feel very good about what we did to ease the burden on the medical staff at hospitals around Maine. And the system developed by the respiratory therapists at Maine Medical center (primarily by someone too modest to want to be identified) was remarkably effective. It required 8 or 9 devices for each patient, and because it was no longer necessary never did get emergency use only approval from the FDA, although they looked at it very carefully.Pileated Woodpecker on Devon StreetDan Abbott2021-07-27 | This young Pileated Woodpecker made short work of this ant-infested deadwood in a tree right beside the street.Maine Classic Car Museum, Arundel, MaineDan Abbott2021-06-15 | I've been anxious to visit this museum for over a year. They opened just before Covid19 and then had to close. The museum is spotless, the staff is very helpful (they will open doors, hoods, or trunks for you), and the collection is modest by some standards, but by no means small and they have some GREAT cars: Tucker, Avanti, Hudson Hornet, Model T. And it is attached to MotorLand, a dealership that sells classic cars. So if you just have to own a classic, you can walk out on the lot and buy one. They had both a 1964 Corvair, and and a 1964 Ford Falcon, my first and second car. If I had room for them -- and was single -- I might have made an offer on both!
At any rate, if your looking for a great way to spend half a day or so, go on down or come on up. You will not be disappointed. The best return on $10 ever.MonicaKeyNote-OneSunRoseOnUsTodayDan Abbott2021-06-05 | Monica Wood Keynote 6/4/2021. USM and UMA diversity conference "One Sun Rose On Us Today."CAM layout for mechanical designDan Abbott2021-05-05 | This is a demonstration of the process of creating a displacement diagram for a plate CAM and generating a CAM profile and displacement table from the diagram.Calculating Fits on a shaft basisDan Abbott2021-04-29 | Start with hole basis and shaft basis it logical and easy.Module12-Updating hundreds of drawings in a hurryDan Abbott2021-04-28 | This is a review of the process up automating the update process for AutoCAD drawings. I say hundreds, but really, the number is unlimited and in fact my most recent project doing this will update over 5000 drawings. You need a batch file, a script file and a lisp program that defines one or more new commands, although it is possible to use this system with AutoCAD-LT if the changes can be done with a script and no AutoLISP code. It is the last assignment in AEDD260, CAD Management the capstone project for that class.SolidWorks Professional Certificate Practice Exam - UpdatedDan Abbott2021-04-22 | This is an updated to the video I posted on this subject some years ago. The practice exam can be downloaded at http://www.solidworks.com/sw/support/797_ENU_HTML.htm.