Uploaded November 2013 | Updated September 2026, 3 days ago

---

Just a short Video of the last minutes of printing thingiverse.com/thing:179267

- Material: PLA
- Temperature: 230°C
- Heating Plate off (printed on BlueTape)
- No Support,
- 90mm Speed (Extruding)
- 150mm Speed (Traveling)
- Resolution: Standard
- Layer: 0.2mm
- Shells: 2

Model scaled down to 10cm Height.
I used a 80mm Fan infront of BuildPlate to accelerate the cool down process while printing.

Printing Time: 1h42m