Can you print (with) your spools? Made with Layers (Thomas Sanladerer) 2024-10-18 | Let’s find out what materials we can and can’t shred into 3D printer filament!Thanks to 3devo for sponsoring the video and loaning me their machines - learn how they can work for your filament creation needs at bit.ly/discover-3devoThe printed clamps are the ”CNC low profile clamps” by TaylorsMake printables.com/model/5685-cnc-low-profile-clampsProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
3D printers are worse than I thought. Time to do something about it! Made with Layers (Thomas Sanladerer) 2024-09-01 | Don't breathe this!Thanks to Sunlu for sponsoring a part of this video! Check out their resin and filament options at go.toms3d.org/sunluThe Ikea filters I used are FÖRNUFTIG (EPA12 + carbon) and the more affordable UPPÅTVIND (EPA only) If you get a HEPA filter e.g. from Amazon, I'd recommend buying a reputable brand to make sure you actually get what you're paying for. Philips is trustworthy and seems to have reasonably priced replacement filters (important as you'll be swapping them multiple times a year): go.toms3d.org/HEPAmazonRead the article to this video here: toms3d.org/2024/10/07/3d-printers-are-worse-than-i-thought-time-to-do-something-about-itSoftware and stls for the sensorbox printables.com/model/993949-3d-printer-emissions-sensor-arrayParts and sensors used:ESP32 WROVER go.toms3d.org/WROVERESP32 breakout go.toms3d.org/ESPbreakout2.4" LCD go.toms3d.org/24lcdPMS5003S particle + formaldehyde sensor go.toms3d.org/PMS5003S (make sure you actually get the "S" variant if you want the formaldehyde sensor - they're a bit hard to find)SDS011 particle sensor go.toms3d.org/SDS011Bosch BME680 VOC, temperature and humidity sensor go.toms3d.org/bme680SCD40 CO2 Sensor (optional) go.toms3d.org/SCD40ScioSense ENS160 VOC sensor go.toms3d.org/ENS160MQ-7 CO sensor go.toms3d.org/MQ-7...modified with these instructions devices.esphome.io/devices/MQ-7I also used an SHT40 temperature and humidity sensor in the front, but it is noticeably inaccurate. I'm currently trying a AHT21 as a replacement.Papers and sources referenced:pubmed.ncbi.nlm.nih.gov/35744939pubmed.ncbi.nlm.nih.gov/28165927sciencedirect.com/science/article/pii/S0160412018323663?via%3Dihub#t0010journals.sagepub.com/doi/10.1177/0192623307313011ncbi.nlm.nih.gov/pmc/articles/PMC5791918https://www.efsa.europa.eu/en/topics/topic/bisphenolModels shown:Canister set by JamesThePrinter printables.com/model/952755-canister-setProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
S is for Speed - Prusa MK4S Made with Layers (Thomas Sanladerer) 2024-08-12 | Thanks to NordVPN for sponsoring this video! Check them out at nordvpn.com/madewithlayersAnd if you order a MK4S, you can use code MadeWithLayers and Prusa will chuck in an extra free spool of Prusament PLA (valid until August 26th, 2024) go.toms3d.org/prusa3Dbenchybenchybenchybenchy printables.com/de/model/986625-3dbenchybenchybenchybenchyProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Rethink how you use 3D printer infill! Made with Layers (Thomas Sanladerer) 2024-07-25 | Is there a "right" way to use 3D printer infill? Is there a "best" pattern? Should you put your filament into the perimeters or into the infill for structural parts? I'll try and answer all those questions and more!Thanks to VoxelPLA for sponsoring this video! Check out their filaments and 3D printer accessories at voxelpla.com/madewithlayers - Free US shipping on 3 spools or morePrinted on the PrusaXL go.toms3d.org/PrusaXLProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
I built myself a new Robot Buddy! Made with Layers (Thomas Sanladerer) 2024-07-06 | Learn more about the AR4 anninrobotics.comThanks to Peopoly and their Magneto X for sponsoring the video! Get $400 off throughout July at peopoly.net/products/magneto-xRelevant productsCNC Kitchen inserts https://cnckitchen.store/ (use code tom5 for 5% off!)Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
How far can I upgrade this toy 3D printer? Made with Layers (Thomas Sanladerer) 2024-06-08 | The Easythreed machines are not good 3D printers, but it's fascinating to see how they managed to build them so cheap. Can we turn it into a sleeper by making some inconspicuous, but impactful upgrades?Thanks to BIGTREETECH for sponsoring this video! Check out the parts I used in the upgrade here:BIGTREETECH PI https://Bit.Ly/3uNvrGhBIGTREETECH SKR MINI E3 V3.0 https://Bit.Ly/49sH30hS2DW Accelerometer Board https://Bit.Ly/3OY4M0uModels shown:Anti-sphere Plant pot by SASSy Design printables.com/model/538186-anti-sphere-plant-pot-and-planter-vase-mode-designSkadis hook by Printuin printables.com/model/147771-skadis-mount-collection(Don't) Buy the Easythreed K9 at go.toms3d.org/ez3dPrintable files for the upgrade printables.com/model/906114Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
How Prusa avoids counting screws Made with Layers (Thomas Sanladerer) 2024-05-24 | Get a Prusa XL for yourself go.toms3d.org/PrusaXLProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Why Prusa clips trinkets to every machine in their printfarm #prusaxl #3dprinting #3dprinter Made with Layers (Thomas Sanladerer) 2024-05-24 | Get a Prusa XL for yourself go.toms3d.org/PrusaXLProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
How Prusas printfarm stays bearable #3dprinting #PrusaXL #Printfarm Made with Layers (Thomas Sanladerer) 2024-05-23 | Get a Prusa XL for yourself go.toms3d.org/PrusaXLProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
I have too many 3D printers, so I proposed a deal #3dprinting #PrusaXL Made with Layers (Thomas Sanladerer) 2024-05-21 | Get a Prusa XL for yourself go.toms3d.org/PrusaXLProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
The Prusa XL is built different Made with Layers (Thomas Sanladerer) 2024-05-21 | Thanks to Flexispot for sponsoring this video! Check out the E7Q and other fantastic value desks and chairs at bit.ly/4aSR1Jp Get the XL from Prusa go.toms3d.org/PrusaXLModels shown:Bubble vase by LaPlaste printables.com/model/853672AR4 robot arm by Chris Annin anninrobotics.comMario Coin by SaintGo printables.com/model/534255Shrek in Armor by ChelsCCT printables.com/model/13487Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps0:00 Intro1:11 Sponsor: Flexispot2:29 Unboxing5:18 Machine Details8:03 Multimaterial testing, troubleshooting and calibration14:23 Print quality16:40 Design details17:41 Confusing bits20:29 Unicorn status23:12 Wishlist
These threaded inserts arent made for 3D prints (but work amazingly well) Made with Layers (Thomas Sanladerer) 2024-04-13 | Heat-set inserts are pretty cool, but you would be missing out if you're not trying what the woodworkers have in stock! Also, were my tests skewed previously by printing my parts too weak - and what about materials other than PLA?Try Meshinspector and get 10% off with code MADEWITHLAYERS (valid till 30.06.2024) meshinspector.comPart 1 of my threaded inserts testing youtube.com/watch?v=eNMAFTeowFsGet the insertsCNC Kitchen heat-set inserts https://cnckitchen.store/ (use code tom5 for 5% off!)Aliexpress heat-set inserts http://go.toms3d.org/AliInsertsRivet nuts on Amazon go.toms3d.org/rivnutsZinc furniture inserts on Amazon go.toms3d.org/zincsertsSteel woodworking inserts on Amazon go.toms3d.org/steelsertsThread repair wire inserts on Amazon go.toms3d.org/wirethreadrepairSelf-tapping inserts on Amazon go.toms3d.org/selfsertProngnuts on Amazon go.toms3d.org/prongsertJLC3DP 3D Printing & CNC Machining Starts at $0.3, Sign Up Get $60 Coupons: jlc3dp.com/?from=MadewithLayersProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Is it worth going Pro? Trying out the Dagoma Sigma Pro 500Z! Made with Layers (Thomas Sanladerer) 2024-03-28 | What even is a professional 3D printer? We're trying out the made-in-France Dagoma Professional Sigma Pro 500Z, which is a rare delta 3D printer, building on open source tech and adding a "professional" touch to it. But does that make it better? We'll find out!Thanks to #3DMakerPro for sponsoring a part of this video! Check out the #Moose at bit.ly/3wYfm17 and use code TomSD15 for $15 off! Download the JMStudio software at forum.jimumeta.com/home/help/download.htmlModels shown:The Baguette by AmazingDesign thingiverse.com/thing:457859Products shown:Dagoma Sigma Pro 500Z dagoma3d.com/shop/dku010036-imprimante-3d-sigma-pro-500z-56845?category=1#attr=Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps:0:00 Intro1:36 Sponsor: 3DMakerPro Moose2:19 Unboxing4:34 Accessories5:24 Toolheads7:23 Machine overview & assembly11:45 Troubleshooting16:16 First Print18:25 Conclusion
The 3D printer with no belts: The Peopoly Magneto X uses closed-loop linear motors! Made with Layers (Thomas Sanladerer) 2024-03-03 | JLC3DP online 3D printing starts at $0.3, CNC machining starts at $8, up to $60 coupons here: jlc3dp.com/?from=MadewithLayersThe Peopoly Magneto X foregoes stepper motors, pulleys and belt and goes straight to closed-loop linear motors embedded into the X and Y linear axes - that's top-tier technology. But did they actually manage to build a worthwhile 3D printer around the tech?More info on the Magneto X: peopoly.net/products/magneto-xProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps:0:00 Intro0:49 Sponsor: JLC3DP1:50 Unboxing7:39 Linear Motor reveal9:50 High voltage safety considerations11:15 Electronics13:50 First power up15:34 Hardware fix: Thrust bearing17:28 First print start: 28 minute Benchy19:50 Slicer21:48 Custom print22:15 Results discussion
I bought the cheapest 3D printer on AliExpress! Made with Layers (Thomas Sanladerer) 2024-02-10 | How much 3D printer can you get for just 72€?Thanks to #anycubic #anycubickobra2pro for sponsoring this video! Check out the Kobra 2 Pro at http://amzn.to/486rlXg with a discount of up to $140 from February 26th to March 10th.(Don't) Buy the Easythreed K9 at go.toms3d.org/ez3dProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps:00:00 - Intro01:00 - Sponsor: Anycubic Kobra 2 Pro01:36 - Unboxing & Teardown08:00 - Assembly11:23 - First power up and calibration14:59 - First print16:18 - Benchy setup16:45 - Benchy & hardware discussion
I bought the cheapest 3D printer on AliExpress Made with Layers (Thomas Sanladerer) 2024-02-10 | How much 3D printer can you get for just 72€?Full video youtu.be/ikjOEaPY6RkDon't buy the Easythreed K9 at go.toms3d.org/ez3dProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Are you using your stepper drivers wrong? E3D Revo Roto Retested! Made with Layers (Thomas Sanladerer) 2024-01-28 | Thanks to PVCase for sponsoring this video! pvcase.com/ThomasSanladererThere was something fishy going on with my initial review results of the E3D Revo Roto, and it was all pointing towards Trinamic's Stealth Chop drivers limiting its performance. But is this Trinamic's fault or did E3D mess up the design of the Revo Roto while trying to get it as small as possible? Well, this one includes quite a bit of exploration, so let's dig in!Previous video on the Roto Revo youtube.com/watch?v=X5UpN0QaxGYProduct linksSmart Orbiter 3.0 from Aliexpress go.toms3d.org/AliSO3E3D Revo Roto & Hemera:from E3D directly http://go.toms3d.org/RevoRotofrom Matterhackers http://go.toms3d.org/E3DMatterBondtech LGX http://go.toms3d.org/LGXSliceMicroSwiss NG http://go.toms3d.org/MicroMatterProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp00:00 - Intro01:33 - Sponsor02:11 - Test setup04:01 - Initial results07:05 - Revo Roto vs Smart Orbiter 307:37 - Stepper driver quirks09:19 - Final Tests09:41 - Final results10:06 - Stealth Chop?10:37 - Step rate limit11:34 - Voltage Limit13:13 - Driver current14:33 - Voltage limitations15:46 - Roto revised conclusion
Do you even need threaded inserts? Strength tested! Made with Layers (Thomas Sanladerer) 2024-01-06 | Let’s test @CNCKitchen 's threaded inserts against no-name alternatives, or even no inserts at all!Thanks to LDO Motors for sponsoring this video - check out the Smart Orbiter v3.0 Story at orbiterprojects.com/SO3 and find out where to get one at docs.ldomotors.com/en/Oribter_Resellers Watch my follow-up video here.youtu.be/lYXTiJo_FQQ?si=CBDYI1i5CIqGgHyxProducts shown:CNC Kitchen inserts & soldering iron adapters: https://cnckitchen.store/ (use code tom5 for 5% off!)Aliexpress alternatives http://go.toms3d.org/AliInserts1/4-20 thread adapters on Amazon http://go.toms3d.org/142038Digital torque gauges on Amazon http://go.toms3d.org/DTorqueProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps:00:00 - Intro00:34 - Sponsor: LDO / Smart Orbiter v3.001:14 - Overview of the inserts used05:13 - How threads work08:22 - Thread fitment11:04 - Test setup build12:28 - Testing13:18 - Results14:41 - Results - Tapped threads15:21 - Results - Modelled threads16:46 - Results - Basic inserts17:21 - Results - Fancy inserts17:44 - Conclusion - Thread adapters
Forget about PEI beds - weve got PEY now! Made with Layers (Thomas Sanladerer) 2023-12-19 | Thanks to Private Internet Access for sponsoring this video! Check them out at http://piavpn.com/Toms3DYou can get the printbed I showed in the video from AliExpress:H1H (Holographic lines) http://go.toms3d.org/H1HPEY (Holographic circles) http://go.toms3d.org/PEYPET (Carbon Fiber texture) http://go.toms3d.org/PETPEO (Polygon texture) http://go.toms3d.org/PEO(The names really seem to have nothing to do with what material they’re made from, they’re just different textures as far as I can tell.)Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)Models shown:Portable Cable Organizer / Winder by squinn printables.com/de/model/564262-portable-cable-organizer-winderFast-Printing Modular Drawer System (Vase Mode) by LR3DUK printables.com/de/model/139570-fast-printing-modular-drawer-system-vase-mode🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps:0:00 Intro1:23 Sponsor2:55 Unboxing5:57 Setup7:10 PLA prints8:10 PLA results10:08 PETG prints10:24 Explanations on how these beds work11:37 PETG results12:35 ASA prints12:55 Conclusion
Is the tiny E3D Revo Roto extruder really enough? Made with Layers (Thomas Sanladerer) 2023-12-01 | Thanks to PVCase for sponsoring this video! pvcase.com/ThomasSanladererProduct linksE3D Revo Roto & Hemera:from E3D directly http://go.toms3d.org/RevoRotofrom Matterhackers http://go.toms3d.org/E3DMatterBondtech LGX http://go.toms3d.org/LGXSliceMicroSwiss NG http://go.toms3d.org/MicroMatterProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps: 0:00 Intro1:08 Sponsor1:44 Unboxing2:50 Tech overview10:37 Test setup11:47 Initial results13:50 Final results discussion15:34 Caveats: 0.6mm HF nozzle18:43 Conclusion
Size isn’t everything - 4 ways to print LARGE parts with a 𝘀𝗺𝗮𝗹𝗹 3D Printer! Made with Layers (Thomas Sanladerer) 2023-11-17 | Thanks to Micro Swiss for sponsoring this video! Check out the FlowTech hotend at store.micro-swiss.com/collections/micro-swiss-flowtechYou don't need to feel like you're limited in what you can do because of the size of your printer - modern tech provides plenty of options to overcome that limitation!Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
This project nearly broke me... Building a 1kW Subwoofer from Hempcrete! Made with Layers (Thomas Sanladerer) 2023-11-08 | Thanks to PVCase for sponsoring this video! pvcase.com/ThomasSanladererInspired by the design of the SpaceX Dragon capsule, I set out to mold its shape into a highly functional subwoofer, made with eco-friendly materials!The amplifier I used (it's pretty good actually) http://go.toms3d.org/1kwAMPPrinted on the Prusa MK4 go.toms3d.org/MK4Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Is Prusas Input Shaping actually Good now? Made with Layers (Thomas Sanladerer) 2023-10-13 | The Prusa Mini now also comes with a preview Input Shaping firmware - time to test it, and the final IS version on the MK4!Check out Material4Print and get 10% off with code tom_10 https://www.material4print.de/?sPartner=1.04Models shown:Vise Grip Print in Place by Adam Cook printables.com/model/511276-vise-grip-print-in-placeOfficial Diablo IV Lilith Head by prash.makes printables.com/model/500651-official-diablo-iv-lilith-headLow Poly Howling Wolf 2.0 (Decoration)(No Supports!) FIXED by Brett Poultney printables.com/model/386392-low-poly-howling-wolf-20-decorationno-supports-fixGet the Prusa MK4 and Mini http://go.toms3d.org/MK4Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Making real Carbon Fiber parts (at home)! Made with Layers (Thomas Sanladerer) 2023-09-23 | I'm upgrading my Voron - with carbon fiber! The Stealthburner toolhead has never looked better.Thanks to Aurapol for sponsoring this video! Check out their PLA HT110 at aurapol.com/pla-ht110 and use code AURAPOL10 for 10% offPrinted on the Prusa MK4 http://go.toms3d.org/MK4Based on the Stealthburner design github.com/VoronDesign/Voron-StealthburnerAll the modified files on Printables printables.com/model/591490-voron-stealthburner-carbon-hoodThe materials I've used are all from shop.hp-textiles.com (who I can absolutely recommend), but also check out easycomposites.co.uk as they've provided invaluable learning material for this process through their YouTube channel (and ship worldwide!)Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Making a (fake) Neon Sign for my (very real) YouTube Channel Name Change! Made with Layers (Thomas Sanladerer) 2023-09-08 | There's never a good time to change a channel name, so why not now?I'll be transitioning the channel from the unpronounceable "Thomas Sanladerer" to the easy-to-remember "Made with Layers" name, and to celebrate the start of the journey, we're making an incredibly believable fake neon sign (with lots of trickery to make it look good)!Materials:LED Neon strip http://go.toms3d.org/ledneonTools:Shaper Origin http://go.toms3d.org/shaperHakko soldering iron http://go.toms3d.org/fx888dHVLP Spray gun toms3d.org/hvlpProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)Watch my Shaper Origin Video here: youtube.com/watch?v=iW6AHl0UvG0🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Make replacement parts faster - with CAD or a 3D scan? Made with Layers (Thomas Sanladerer) 2023-08-25 | The results will surprise you (and aren't as clear-cut as you might think)!Thanks to Private Internet Access for sponsoring this video! Check them out at http://piavpn.com/Toms3DCheck out @SuperfastMatt's video: youtube.com/watch?v=rORuE8Oyxd0Download the files on Printables printables.com/model/563401Scanned with the 3DMakerpro Lynx http://go.toms3d.org/lynxProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Does the Prusa MK4 have what it takes? Made with Layers (Thomas Sanladerer) 2023-07-10 | Prusa has released a long-awaited successor to their legendary MK3 line of printers. But is it still enough in today’s market?Thanks to Mintion and their Beagle V2 Camera for sponsoring this video! Get your own from:Amazon toms3d.org/BeagleCamV2 (Code for 20% off - 🇩🇪 HXAN4K3O, 🇫🇷 TMU5836H)Use code 3DPRINTERCAMERA for 10% off Mintion Get the Prusa MK4 http://go.toms3d.org/MK4Filament usedPrusament PLA and PC Blend go.toms3d.org/prusamentModels shownErgonomic lockable bit screw driver with print-in-place freewheel by HD_Creator printables.com/model/493064-ergonomic-lockable-bit-screw-driver-with-print-in-Flexible Hexagonal NASA Chainmail Tie 3 sizes by Maker81 printables.com/model/503382-flexible-hexagonal-nasa-chainmail-tie-3-sizesArticulated Whale Shark by JD3D printables.com/model/507275-articulated-whale-sharkVise Grip Print in Place by Adam Cook printables.com/model/511276-vise-grip-print-in-placeOfficial Diablo IV Lilith Head by prash.makes printables.com/model/500651-official-diablo-iv-lilith-headLow Poly Howling Wolf 2.0 (Decoration)(No Supports!) FIXED by Brett Poultney printables.com/model/386392-low-poly-howling-wolf-20-decorationno-supports-fixRead the article to this video here: toms3d.org/2023/07/13/does-the-prusa-mk4-have-what-it-takesCheck out the Meltzone podcast with Tom, Stefan and Scott Lahteine on how open source works: youtube.com/watch?v=4aMo5IyVeu0Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Open Source isnt sustainable anymore Made with Layers (Thomas Sanladerer) 2023-06-18 | Open Source projects are being exploited - and that leaves everyone worse off than we started.Check out the 3DMakerPro Lynx at shareasale.com/u.cfm?d=1033360&m=139161&u=2692654&afftrack= and use code TM3D20 for an extra $20 off!Read the article to this video here: toms3d.org/2023/06/20/open-source-isnt-sustainable-anymoreProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Testing E3Ds new Revo High Flow nozzle to its limits! Made with Layers (Thomas Sanladerer) 2023-05-31 | The first 1,000 people to use the link will get a 1 month free trial of Skillshare https://skl.sh/thomassanladerer05231The original Revo Review youtube.com/watch?v=FIXG3tlILCYGet the Revo High Flow nozzlesfrom E3D http://go.toms3d.org/RevoHFfrom Matterhackers http://go.toms3d.org/RevoHFMFRead the article to this video here: toms3d.org/2023/06/02/testing-e3ds-new-revo-highflow-nozzle-to-its-limitsProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
I cant handle metal plating 3D prints Made with Layers (Thomas Sanladerer) 2023-05-05 | Also watch this video where I have a bit more success with electroplating youtube.com/watch?v=xOXaC-Jh70gProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Why you should get a 3D printer NOW Made with Layers (Thomas Sanladerer) 2023-04-28 | Thanks to MicroSwiss for sponsoring this video! Check out the Revo NG at store.micro-swiss.com/collections/extrudersEnder-3 Series as a tinkering base http://go.toms3d.org/Ender3v2AMZAlternatively, the Elegoo Neptune series http://go.toms3d.org/Neptune2AMZor the Sovol SV-06 http://go.toms3d.org/SV06Prusa MK series as plug-and-play machines http://go.toms3d.org/MK4Read the article to this video here: toms3d.org/2023/05/11/why-you-should-get-a-3d-printer-nowProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps0:00 Introduction0:23 Sponsor MicroSwiss1:02 It's a Tool3:24 It's a Lifestyle4:59 It's a Gateway6:34 It's Unobtrusive8:12 Upcycling opportunities
Why you should NOT get a 3D printer Made with Layers (Thomas Sanladerer) 2023-04-28 | Thanks to Private Internet Access for sponsoring this video! Check them out at http://piavpn.com/Toms3DProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)Read the article to this video here: toms3d.org/2023/05/11/why-you-should-not-get-a-3d-printer🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dpTimestamps0:00 Introduction0:27 Sponsor PIA1:42 It's Overwhelming3:18 "Community"4:20 Plastic waste5:51 Limitations
The MK4 unboxing experience #shorts Made with Layers (Thomas Sanladerer) 2023-04-13 | Watch the full unboxing youtube.com/watch?v=CY2TCS-G2JkGet the Prusa MK4 http://go.toms3d.org/MK4Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Everything you need to know about the new Prusa MK4! Made with Layers (Thomas Sanladerer) 2023-04-01 | Get the Prusa MK4 http://go.toms3d.org/MK4Timestamps:0:00 Intro1:03 Load cell autoleveling2:05 Live adjust Z?2:28 Nextruder toolhead3:14 Cold-swapping nozzles3:26 Nozzle options4:06 Why not Revo?4:52 Stock hotend performance & modding options6:25 Third-party nozzles (patents?)6:37 Input shaping7:41 Input shaping challenges on i3-style printer?8:04 Printer performance goals8:57 New motors (VFAs)10:05 Additional wear from higher speeds?11:33 New touchless user interface 12:34 New bed, compatibility to MK313:22 New extruder & suitability for flexibles14:45 Filament sensor15:40 Potential future use of the load cell16:31 Additional sensor on toolhead17:39 Toolhead daughter board18:35 New mainboard19:44 Networking features21:11 Offline printing options22:44 Still using TMC2130, more VFA fix details23:56 Issue 60224:37 MK3 upgrade options26:20 End of life for previous machines27:41 Multi-use firmware28:09 SMT line tour28:56 Pricing and product goals30:38 Why still use printed parts?32:23 MMU3Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Dump your 0.4mm nozzle! #shorts Made with Layers (Thomas Sanladerer) 2023-03-29 | Get PrusaSlicer prusa3d.com/page/prusaslicer_424#a_aid=toms3DPFull video youtube.com/watch?v=WgXM2zPusXoModels shownSalty McCreedy https://www.printables.com/model/1106...3D Benchy https://www.printables.com/model/3161...Sony Microscope lens adapter printables.com/model/143754Prusa SL1 Test Object https://www.printables.com/model/5375...Relevant productsGenuine E3D Nozzles & Obxidian http://go.toms3d.org/E3Dnoz... on Amazon http://go.toms3d.org/GenuineE3DnozGenuine Slice Engineering Nozzles http://go.toms3d.org/SliceNozFilament is Prusament Galaxy Black PLA http://go.toms3d.org/PrusamentProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Making Samsungs PC monitor usable with a simple 3D printed adapter! Made with Layers (Thomas Sanladerer) 2023-03-23 | Get CNC Kitchen's Threaded inserts http://go.toms3d.org/CthreadedNinsertsCkitchenProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
What it takes to make a YouTube video #shorts #outtakes Made with Layers (Thomas Sanladerer) 2023-03-21 | Watch the full video at youtube.com/watch?v=zWCoxzMk818Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Escape from the claws of the corporate CAD overlords - with FreeCAD! Made with Layers (Thomas Sanladerer) 2023-03-20 | FreeCAD has enormous aspirations - but it struggles to deliver. But use it right and it's actually pretty decent!Thanks to Peopoly for sponsoring this video! Check out the Phenom Forge peopoly.net/products/phenom-forge-by-peopolyTry FreeCAD freecad.org/index.phpRealThunder's version github.com/realthunder/FreeCAD/releasesRead the article to this video here: toms3d.org/2023/03/23/free-cadProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Can this 3D printer be a (good) 4-axis CNC? Made with Layers (Thomas Sanladerer) 2023-02-27 | 4 is one better than 3!Thanks to Private Internet Access for sponsoring this video! ➡️ piavpn.com/Toms3DSnapmaker and Snapmaker accessories on Amazon http://go.toms3d.org/MakeA250SnapProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
PrusaSlicer 2.6 might change how we work with 3D files (and you can use it with any 3D printer)! Made with Layers (Thomas Sanladerer) 2023-02-11 | Thanks to Micro Swiss for sponsoring this video! Buy three nozzles and get two more of equal or lower value for FREE until February 12th 11:59 pm CST at store.micro-swiss.comRead the article to this video here: toms3d.org/2023/02/24/prusa-slicer-2-6Current PrusaSlicer ALPHA releases at github.com/prusa3d/PrusaSlicer/releasesModels shown:Skull holder for glasses by 3D in Plastic printables.com/model/358815Rugged Box (Parameterized) by Whity printables.com/model/258431-rugged-box-parameterizedSpider-Man/Peter Parker by Eastman printables.com/model/36692-spider-manpeter-parker-stlFilament is all Prusament PLA http://go.toms3d.org/Prusament Printed on the MK3 http://go.toms3d.org/PrusaProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Electroplating at home Made with Layers (Thomas Sanladerer) 2023-01-29 | Thanks to Onshape for sponsoring this video! Create your free account at https://onshape.pro/ThomasSanladererElectroplating (or galvanic coating) allows you to plate almost anything with a layer of real metal. But it's a finicky process to get to work. In this video I'll be showing what worked for me and what didn't!Models shown:Roadhog by @fotismintofficial printables.com/model/3379-roadhog-overwatch3D Benchy by Creative Tools printables.com/model/3161-3d-benchyTools you'll needMagnetic stirrer http://go.toms3d.org/stirrrrrrLab power supply http://go.toms3d.org/powerrrrrrrrNitrile gloves http://go.toms3d.org/glovessssssssCrocodile clip leads http://go.toms3d.org/clipsssssss (these will most likely need resoldering)You'll also need suitable containers, anode material, conductive copper spraypaint (mine is a relabeled CRC can, which works well) and electrolytes. Buy these from a trustworthy seller in your region of the world.Please work safely.Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Bambu Lab P1P: Tradeoffs Made with Layers (Thomas Sanladerer) 2022-12-09 | The P1P is an incredibly impressive printer, but did it have to make all the tradeoffs it comes with?Thanks to Dyze Design for sponsoring this video! http://dyzedesign.com/orthus-filament-monitorRead the article to this video here: toms3d.org/2022/12/09/bambu-labs-p1p-first-lookMore info on the P1P bambulab.com/en/p1Models shown:3D Benchy printables.com/model/2236-3dbenchy-the-jolly-3d-printing-torture-test-by-creTreefrog printables.com/model/3116-treefrogFilament used:extrudr PLA NX2 epic purple extrudr.com/en/products/catalogue/pla-nx2-lila_3008Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
This printer is OLD. Why is it still my favorite? Made with Layers (Thomas Sanladerer) 2022-11-25 | The Prusa MK3 is coming up on turning half a decade old - and it shows. So why do I keep using them?Thanks to Private Internet Access for sponsoring this video! ➡️ piavpn.com/Toms3DRelevant products:The MK3 (of course) http://go.toms3d.org/PrusaRead the article to this video here: toms3d.org/2022/11/28/this-printer-is-old-why-is-it-still-my-favoriteProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
How tough is ObXidian really? Made with Layers (Thomas Sanladerer) 2022-11-11 | The E3D ObXidian is E3D's new flagship nozzle. What does it take to break it?Thanks to Onshape for sponsoring this video! Create a free account here: https://Onshape.pro/ThomasSanladererGet the ObXidian at http://go.toms3d.org/obxidianRead the article to this video here: toms3d.org/2022/11/15/how-tough-is-obxidian-reallyProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
The 3DBenchy is an awesome model - but do you know how to use it? Made with Layers (Thomas Sanladerer) 2022-10-28 | Thanks to Micro Swiss for sponsoring this video! Check them out at store.micro-swiss.comRead the article to this video here: toms3d.org/2022/11/08/how-to-use-a-3dbenchyModels shown:3DBenchy http://3dbenchy.comLow-poly Pokemon by Flowalistik flowalistik.com/portfolioFilament/printers used:Prusament PLA Pearl Mouse and Gentlemen's Grey http://go.toms3d.org/PrusamentPrusa Mini and MK3 http://go.toms3d.org/PrusaSources for CO2 emission data:researchgate.net/figure/Energy-consumption-and-CO-2-emissions-for-production-of-1-ton-PLA-8-10_tbl1_328771124innovationorigins.com/en/producing-gasoline-and-diesel-emits-more-co2-than-we-thoughtProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
You can build this 5-axis Prusa conversion: The Open5X! #ERRF2022 Made with Layers (Thomas Sanladerer) 2022-10-18 | All the documentation for the Open 5X: github.com/FreddieHong19/Open5xThanks to Onshape for sponsoring this video! Professional Trial: https://onshape.pro/TomFree Plan: onshape.com/en/products/free?tm_source=youtube&utm_medium=influencer&utm_campaign=Influencer_ThomasSanladererProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
Trash to treasure: Convert an Ender-3 into a plastic bottle upcycling machine! #ERRF2022 Made with Layers (Thomas Sanladerer) 2022-10-16 | Could it really be that easy to convert trash into fresh 3D printer filament? http://recreator3d.comThanks to Siraya Tech for sponsoring this video! Check out their resins (and the new Simple!) at toms3d.org/SirayaSimpleProduct links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
You can build this open-source pick and place machine - LumenPNP by Opulo! #ERRF2022 Made with Layers (Thomas Sanladerer) 2022-10-14 | Check out Opulo at opulo.ioThanks to JLCPCB for sponsoring this video! 3D printing from $1, $54 new user coupons atjlcpcb.com/3d-printing?from=ThomasSanladerer 🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
This super-compact Revo extruder from Micro Swiss is built on an angle! #ERRF2022 Made with Layers (Thomas Sanladerer) 2022-10-08 | Thanks to Micro Swiss for sponsoring this video! Check them out at store.micro-swiss.com🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
High-quality Voron kits and closed-loop steppers from LDO! #ERRF2022 Made with Layers (Thomas Sanladerer) 2022-10-08 | If you're at ERRF, swing by the LDO booth - they're doing giveaways on both days!Thanks again to LDO for sponsoring this video - check them out at http://ldomotors.com and find their resellers for the Voron kits atdocs.ldomotors.com/voron/LDO_Voron_Distributors🎥 All my video gear toms3d.org/my-gearI use Epidemic Sound, sign up for a 30-day free trial here http://share.epidemicsound.com/MadeWithLayers🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
