Visual Guy
8bomb Custom 1958 PAF Clone Pickups | Dr. Nitro | 1959 Gibson Les Paul Standard Reissue
updated
BY THE WAY: Shirt courtesy of my friend Casey of Jim Quick & Coastline. Check them out! jimquick.com
I'm using my Frank Brothers Arcade into my Dr. Z with a Lovepedal Les Luis, Mythos Oracle and LPD Cascade.
Gear:
Guitar: frankbrothersguitars.com
Amp/Speaker: http://drzamps.com
Les Luis: http://www.lovepedal.com
Delay: mythospedals.com
Reverb: lpdpedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
My pal Jeremy from Advanced Music Products in Nashville sent this set to me and wanted to know what I thought of them. Super impressed with this cool set of Area 59 PAFs from Crazy Parts! The respond so well to the guitar and rig. You can hear tons of note separation in this video. Even the drive tones have a 'clean' characteristic to them. Not excited to send these back but the show must go on.
BY THE WAY: Shirt courtesy of my friend Casey of Jim Quick & Coastline. Check them out! jimquick.com
I'm using my R9 into my Dr. Z with a Lovepedal Les Luis, Mythos Oracle and LPD Cascade.
Gear:
Amp/Speaker: http://drzamps.com
Les Luis: http://www.lovepedal.com
Delay: mythospedals.com
Reverb: lpdpedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
For the rig you are hearing:
1957 Custom Shop Reissue Les Paul with Total Gravy Mid PAF into the LPD CLE-304 with the EQ set to boost the solo. The LPD Dutch is in the loop of the 304. I'm running into an Echo Park Delay and LPD Cascade Infinity. The signal splits at the delay pedal and goes out to both my Dr. Z Maz 18 and 1x12 cab with the Dr. Z/Eminence Speaker (mic'd on the recording) and the Ceriatone Plexi50 Bass and Marshall 2x12 cab. (not mic'd). All EQ cables between the jacks.
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
For the rig you are hearing:
My R7 Les Paul with Total Gravy Mid PAFs into LPD Dutch is in the loop of the CLE-304. I'm running into an Echo Park Delay and LPD Cascade Infinity. The signal splits at the delay pedal and goes out to both my Dr. Z Maz 18 and 1x12 cab with the Dr. Z/Eminence Speaker (mic'd on the recording) and the Ceriatone Plexi50 Bass and Marshall 2x12 cab. (not mic'd). All EQ cables between the jacks.
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
For the rig you are hearing:
Frank Brothers Arcade with Righteous Sound RAFs into the LPD CLE-304 with light compression on, and the EQ set to boost the solo. The LPD Dutch is in the loop of the 304. I'm running into an Echo Park Delay and LPD Cascade Infinity. The signal splits at the delay pedal and goes out to both my Dr. Z Maz 18 and 1x12 cab with the Dr. Z/Eminence Speaker (mic'd on the recording) and the Ceriatone Plexi50 Bass and Marshall 2x12 cab. (not mic'd). All EQ cables between the jacks.
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
Been on a Silver Sky kick lately, and so I decided to hunt down some pickup sets that have some JM influence. This is the Ursa Major set from Fatpups. Alnico 2 magnets at 5.5k, 5.7k, and 6k respectively. Designed to be inspired by the Big Dipper set only found in select Fender CS Strats and in the JM tribute guitars. Likely what PRS went after as well to maintain his Strat tones.
In this video I"m using my Dr. Z Max and LFT Lustcaster Strat with an LPD CLE-304 and Cascade for reverb. I have the O.C.E. Pedals Pliers on the whole time and add some Klon boost with the Mythos Mjolnir.
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
The new Cestus from @MythosPedals takes the conventional germanium treble booster and flips it on its end, using a NOS silicon transistor and employing a voice switch to expand its capabilities. If you listening to the knob turning, it is incredibly dynamic with guitar controls and will all but disappear in the sound, giving the player total control of gain stages in just their hands. You can read more about on the Mythos site here: mythospedals.com
I'm using a lot of gear, but for the knob turning its a 60th Anniversary R9 with Jonesy Blues PAFs and a Mythos Oracle into my Ceriatone Plexi50 Bass head, cranked to about 6-7 into a UA OX Box. More gear below!
Gear:
Amp: http://www.ceriatone.com
Frank Brothers: frankbrothersguitars.com
Righteous Sound Pickups(Frank): righteoussoundpickups.com
Jonesy Blues Pickups(R9): jonesyblues.com
Danocaster: danocaster.com
Arcane Pickups (Danocaster): arcaneinc.com
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Desk Pedal Board: kypedalboards.com
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
I'm using my Danocaster Single cut with Arcane '56 Experience pickups through a 50w JMP (bass circuit) clone from Ceriatone. Some Reverb. All ran into UA OX. Cheers!
00:00 - BJFe HBOD Retro vs OC HBOD
01:58 - BJFe HBOD Retro vs OC HBOD Mini
04:53 - BJFe HBOD Retro vs OC HBOD Mini Custom
07:07 - Maxed Gain Comparison
10:07 - OC HBOD Mini vs OC HBOD Mini Custom
12:30 - BJFe HBOD Retro vs BJFe Orchid Bee
14:23 - BONUS! ALL 5 AT THE SAME TIME!
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
11/3/22 Release via Newsletter email! Sign up for the newsletter at www.lpdpedals.com
Using my Ceriatone Plexi bass through the OX with a bunch of guitars and an Line 6 Echo Park for delay. Knob turning is with my Heartland Tone Tele loaded with VIP Telex pickups.
Gear:
Amp: http://www.ceriatone.com
Frank Brothers: frankbrothersguitars.com
Righteous Sound Pickups(Frank): righteoussoundpickups.com
Jonesy Blues Pickups(R9): jonesyblues.com
Telex Pickups (Tele) & Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Desk Pedal Board: kypedalboards.com
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
Using the drive side of the Pliers from O.C.E. Pedals through my Dr. Z Max 18 and an LPD Cascade Reverb. Thanks for watching! More about the pickups here: totalgravy.com
Gear:
Amp/Speaker: http://drzamps.com
Pliers: ocepedals.com
Reverb: lpdpedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
More here: http://bmfeffects.com
Gear:
Amp: http://www.ceriatone.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups(Frank): righteoussoundpickups.com
Total Gravy Guitarworks Pickups (R7): totalgravy.com
Jonesy Blues Pickups(R9): jonesyblues.com
Arcane Pickups (Danocaster): arcaneinc.com
Telex Pickups (Tele) & Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Desk Pedal Board: kypedalboards.com
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
Presenting the new @o.c.e.pedals3418 'The Pliers' Drive/Boost. Drive side is a modified BB circuit and the Boost is a single transistor, independent boost that likely gives the sounds that most people hear in their head when they say the word "Germanium"...(even though it isn't). They work great together, and the clever part is that the boost feels like the drive, and the drive feels like a boost b/c of its clarity. This creates for a very unique drive that should serve many people well.
More here: ocepedals.com/products/pliers-boost-overdrive-hardware-series?variant=43368152826076
Gear:
Amp: drzamps.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
R7 Pickups: Total Gravy Pickups: totalgravy.com
Tele Pickups &Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.
This goes live on the LPD website at 8am PST. Link below.
The newest installment to the LPD Pedals core line is the Seventy4 Deluxe. The Seventy4 Deluxe is a dual channel overdrive preamp that captures the tone, dynamics and feel of early 70’s Marshall amps. The red channel is the familiar circuit of the original Seventy4 audio device. The green channel is an all new design from Lawrence that he created to compliment the original The new green channel is a cleaner and milder Marshall tone that stacks feels like your Marshall turned down to 3-4. Edge of breakup tones, mid range push that sounds big and bold, but not over the top (until you crank the gain to 8 or so). The Deluxe also has voice switches for each channel. The default voice switch setting is down, and switching it to the up position adds some low-mid range and gain. I kind of think of this as ‘jumping the channels’ on a 4-hole Marshall vs. just plugging straight into the high input. It also includes all the high-end appointments that LPD Pedals come with including custom proprietary knobs, soft-touch switching, and top mounted jacks in a small 1590bb enclosure.
LPD Pedals: lpdpedals.com/audiodevices
In this video I'm using a lot of gear and most of it is listed below. For the knob turning I'm using my R9 with Jones Blues ’59 Kalamazoo pickups, into my Dr. Z May with a LPD Pedals Cascade Reverb.
Amp: drzamps.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
Jonesy Blues Pickups: jonesyblues.com
Arcane Pickups: arcaneinc.com
Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
***Thanks so much for watching! If you'd like to support the channel, consider using the Super Thanks option above to donate and help fund the channel. Also please like subscribe and leave a comment if you haven't already. Comments are much appreciated and I always try to respond to them.***
In this video I'm using my Ceriatone Plexi50 Bass with a multitude of guitars including my Frank Brothers with RAF Pickups from Righteous Sound. For the knob turning I'm using my Danocaster with Arcane 56 pickups. Delay from Mythos and LPD Pedals.
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
Total Gravy Pickups: totalgravy.com
Vintage Inspired Pickups: vintageinspiredpickups.com
Arcane Pickups: arcaneinc.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
Thanks for watching and please consider subscribing!
Featured here are the VIP TELEX pickups from Vintage Inspired Pickups. A blackguard inspired set, but with some non traditional appointments that set them apart from being just another black guard attempt. Using different pole pieces for the bass and treble strings in the bridge to keep a balance. The neck uses NOS AWG 43 wire. The set has really made this guitar sound incredible, paired with a set of the VIP 280k pots.
More info here: vintageinspiredpickups.com
In this video I'm using my Heartland Tone Daytona tele through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using a BJFe Flametop for drive.
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
More info here: cavalierpickups.com
In this video I'm using my FSR Reverse Headstock Strat through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using a BJFe Flametop for drive.
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
The @LawrencePetross Lucent Overdrive is Lawrence’s take on the classic Marshall Blues Breaker circuit, which is known as one of the most popular “transparent” overdrive circuits. The Lucent offers the classic Blues Breaker feel and response with a few LPD twists including a toggle introduces more gain, a different EQ, and clipping options, while still being 'transparent' if you need it to be. The Lucent is the drive pedal that LPD fans will want to stack with their favorite audio devices from Lawrence, but it may also be one of the best options for any one wanting to try something from LPD. This drive will work with basically anything because of its ability to to give you more of what you give it when stacking. Thanks for watching and I hope you subscribe!
LPD Pedals: lpdpedals.com/audiodevices
In this video I'm using a ton of gear, but the knob turning is my Frank Brothers Arcade with Righteous Sound Pickups. A Vintage Sound 22sc Amp and UA OX. The Heartland Tone Tele has VIP Telex pickups installed and the White Strat has Cavalier SRV Tigers. Also used the Lust For Tone Strat in the track.
Amp: vintagesoundamps.com
Frank Brothers: frankbrothersguitars.com
Righteous Sound Pickups: righteoussoundpickups.com
Cavalier Pickups: cavalierpickups.com/soundbytes.html
Tele Pickups & Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
The Fifty5 is available via Newsletter Subscription on 5/23. (the email will go out at 12pm EST.) If you aren't subscribed to the newsletter it will be available on the website Tues, 5/24 on the website to the general public.
LPD Pedals: lpdpedals.com/audiodevices
In this video I'm using a lot of gear and most of it is listed below. For the knob turning I'm using my Danocaster with Arcane Pickups into a Vintage Sound 22sc with a LPD Pedals Cascade Reverb.
Amp: vintagesoundamps.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
Jonesy Blues Pickups: jonesyblues.com
96 Art: https://facebook.com/96artinstruments
Arcane Pickups: arcaneinc.com
Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
More info here: cavalierpickups.com
In this video I'm using my FSR Reverse Headstock Strat through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using a Mythos Herculean v2 for drive.
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Mythos Pedals: mythospedals.com
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
I think this video is going to let the pickups speak for themselves. The only thing you need me to say about them is "highly recommended". If you don't already follow @jonesyblues here on Youtube and on Instagram you are doing yourself a disservice. His Youtube channel is chalked full of great information about pickups, design, and tons of demos of the stuff he makes.
59' Kalamazoo set is a 7.7k/A2 neck and an 8.4k/A4 bridge design.
Jonesy's website: jonesyblues.com
In this video I'm using my R9 into my Vintage Sound 22sc with an Eminence GA-SC64 speaker. LPD Dutch and Cascade. Sheptone Strings like always. Thank so much for watching!
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Also - New look for the channel! I'm going to start uploading most videos in 4K!
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
In this video I'm using my Danocaster Single Cut with Arcane '56 Experience pickups, and Vintage Sound 22SC amp. I'm using the LPD Embers and Dutch for Overdrive, and some modulations from the BMF Effects Model No. 915 Univibe and Walrus M1. Thanks so much for watching!
Amp: vintagesoundamps.com
Danocaster: danocaster.com
Arcane Pickups: arcaneinc.com
Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
Website: totalgravy.com/store/p49/Mid_P.A.F._Set.html
In this video I'm using my R9 with a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 speaker. BJFe Flametop and LPD Pedals Cascade for reverb. R9 has VIP pots and Sheptone strings. Cheers!
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
You probably associate the word 'velvet' with a specific amp style and tone and you'd be right. The Velvet Hammer is a Dumble like overdrive pedal from BMF Effects. I was pleasantly surprised on this one and how responsive it can be to the guitar's controls. The Gain is a subtle increase after 9 o'clock and the tone control is always 'just enough' regardless to whether you are rolling off or adding a little high-end. Boost section works with the drive and cascades a small amount of miss and gain into the drive section of the pedal. All in a very pedal board friendly, custom enclosure that's smaller than a normal 1590bb. More here: bmfeffects.com/shop-online
In this video I'm using a lot of gear and most of it is listed below. For the knob turning I'm using my R9 with Total Gravy Guitarworks Mid PAFs into a Vintage Sound 22sc with a LPD Pedals Cascade Reverb.
Amp: vintagesoundamps.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
Total Gravy Guitarworks: totalgravy.com
96 Art: https://facebook.com/96artinstruments
Arcane Pickups: arcaneinc.com
Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Desk Pedal Board: kypedalboards.com
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Universal Audio Apollo Twin
Universal Audio OX
Logic Pro X
These are no secret! Mick's Flagship PAF style build. AlNiCo 2 goodness with all the subtleties you expect in a complex sounding PAF in the 7-8k range. He also can do some custom options like a lower wound neck pickup, and I know he's offered different magnet types if a customer would rather go with their favorite. More info here:
manliusguitar.com/products/landmark-paf
I'm using my Muleskinner Amps MS17 with an Eminence GA-SC59 speaker. BJFe Flametop for overdrive and LPD Cascade Reverb, my go to reverb pedal these days. Sheptone Strings and VIP Pots like always. Thanks for watching!
Amp: facebook.com/muleskinneramps
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
I happened across 96 Art Guitarworks while looking on reverb for boutique pickup winders that I have yet to discover. This is a set of Tim's Enchanters. wound to over 11k DCR! But, they use 43 awg plain enamel wire instead of a tradition PAF style 42 awg. Because of the smaller wire, more turns can be added to the bobbins, and gives a higher resistance reading, Nate, the owner, offers a traditional PAF style spec but he recommended me trying this set first because of the design intention, which were to get those cool, Jimmy Page tones when ordering 4-conductor leads and coil tapping them. As you can hear in the video, this set is super touch responsive, bright, clear and just over all sweet sounding.
Here is where to buy: reverb.com/item/42167311-96-art-handwound-tim-s-enchanters-humbuckers-balanced-classic-tone-bridge-and-neck-pair
96 Art Guitarworks Facebook: facebook.com/96artinstruments
I'm using my Muleskinner Amps MS17 with an Eminence GA-SC59 speaker. I thought it would be cool to show just how polite these are even at 11k output (because of the smaller wire) with a low-wattage amp that wants to break up on 3. BJFe Flametop for overdrive and LPD Cascade Reverb, my go to reverb pedal these days. Sheptone Strings and VIP Pots like always. Thanks for watching!
Amp: facebook.com/muleskinneramps
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
The Mixtape set from Manlius is a design that replicates the replicas. This set set gives the nod to the early PAF replicas in the 80s as the T-Tops was transitioned out and you see some PAF reproductions from Tim Shaw and Dry Z models from Greco in high-end Japanese Les Paul copies appear into the market. The Mixtapes are wound with vintage SPN wire and come with rough, long A2 magnets. You can find more here at the Manlius site: manliusguitar.com/products/mixtape
In this video I'm using my R7 with a BJFe Model G and LPD Cascade Reverb. Playing into my Vintage Sound 22Sc with an Eminence GA-SC64 speaker. Thanks so much for watching!
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
The 109° Distortion is a LPD Limited release for newsletter subscribers. Its inspiration comes from some of the most popular distortion sounds from the 1970's and 1980's, at their final production and album release. Sign up for the Newsletter to have access to the first run, releasing on 3/24/22. lpdpedals.com
I'm using lots of gear in this video. The guitars were my Frank Brothers Arcade with Righteous Sound RAFs, R7 Les Paul with Manlius Mix Tape pickups, LFT Strat and Danocaster Single Cut with Arcane 56 pickups. Using my Vintage Sound 22SC into OX. Using the LPD Cascade and Offset for Delay and reverb.
Amp: vintagesoundamps.com
Frank Brothers: frankbrothersguitars.com
Danocaster: danocaster.com
Righteous Sound Pickups: righteoussoundpickups.com
Manlius Pickups: manliusguitar.com
Arcane Pickups: arcaneinc.com
Electronics: vintageinspiredpickups.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
Using my new Danocaster Single Cut with Arcane Pickups. Vintage Sound 22SC into OX. LPD Pedals Cascade for Reverb. Thanks for watching!
I've followed BMF Effects for a long time now, and when I saw Scott was releasing a Uni-vibe I had a hunch I should get on the list and reserve one of the first releases. The Model 915 is a faithful recreation, tuned by ear, to match his favorite sounding vintage Uni-vibe. Its a true photocell/lamp design with a nod to both original and modern versions. Cancel functionality, expression pedal output, 9v or 18v, (35mA on 9v), and lots more. Here in the room, it has a very flowing, soupy throb. The taper of the knobs make it easy to dial in unlike lots of variants which have a super sensitive taper. And...Its in the normal BMF two-switch enclosure which is extremely pedalboard friendly compared to some of the Uni-vibe offerings with this many features. Check out everything on the BMF website: bmfeffects.com/shop-online
In this video I'm playing my LFT Strat through my Ceriatone Plexi Bass, on the bright channel cranked to about 7.5. I'm using a Muleskinner Amps Fuzz and a BJFe Model G for Drive tones. Line 6 Echo Park for delay and LPD Cascade for light reverb.
The backing track is from Youtube user @nowyoushred. Thanks again!
Track link: youtube.com/watch?v=T6U2c5SNARU&t=452s
00:00 - Backing Track
01:32 - Clean + Chorus setting
02:56 - Cancel Functionality
03:47 - Overdrive + Chorus setting
04:22 - Clean + Vibrato setting
05:42 - Vintage vs. Modern modes
06:52 - Fuzz/OD + Chorus setting
Fuzz: facebook.com/muleskinneramps
Reverb: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
I don't know what description to write here. Let me know what YOU think in the comments. I know what I think. :)
In this video, I'm using my R7 with a Vintage Sound 22SC and Eminence GA-SC64. I leave a BJFe Model G, LPD Cascade Reverb and Mythos Oracle on the whole time. All tones are with the guitar's volume. Thanks so much for watching.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Mythos Pedals Oracle: mythospedals.com/oracle
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
I have a lot of RAF videos these days, and I don't mind one bit. One thing I waited on doing was installing these in the R9 because I was afraid of what would happen. This is the AlNiCo 2 version of the RAF (I have the A4 version in my Frank Brothers). Low output, vintage clarity that can do pretty much whatever you want. I don't think I've put them in any guitar and they felt like they didn't belong.
In this video, I'm using my R9 with a Vintage Sound 22SC and Eminence GA-SC64. I leave a BJFe Model G and LPD Cascade Reverb on the whole time. All tones are with the guitar's volume. Thanks so much for watching.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
Featured here is the Cavalier Esquire Stealth Neck pickup that sits underneath an esquire guard. The pickup made with a bar magnet that is strong enough retain the high-end even through the plastic of the guard. This pickup ships with foam of different heights, and is held in place by the guard pressing it down against the foam. The Esquire look with a fully functional neck pickup. Very cool!
More on the Cavalier site here: cavalierpickups.com
In this video I'm using a MIM Telecaster through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using a BJFe Model G and a Line 6 Echo Park for delay.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Mythos Pedals: mythospedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
From Rob at Cavalier: The Bear AR90 is a vintage P90® style pickup, calibrated by position (neck, middle, bridge). This is an early rendition of the classic P90® that Gibson used in their 1946 ES125 guitars and uses rod magnets and 42AWG coil wire, with 10000 turns for the neck position, 11000 for the middle and 12200 for the bridge. A blend of "Gibson meets Fender". A favorite for the neck position in a Tele® and just perfect for a lap steel! A choice of all A5 rod magnets for the most output and aggressiveness, or a blend of A5 rod magnets for the bass strings (E/A/D) and A3 rod magnets for the treble strings (G/B/E) that allows a sweeter high end, or all A3 rod magnets for the most string to string clarity. Supplied with covers (a choice of black or cream) and body mounting screws with both height springs and tubing.
More on the Cavalier site here: cavalierpickups.com
In this video I'm using a MIM Telecaster through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using a BJFe Model G and a Line 6 Echo Park for delay.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Mythos Pedals: mythospedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
From Rob at Cavalier: The Bear AR90 is a vintage P90® style pickup, calibrated by position (neck, middle, bridge). This is an early rendition of the classic P90® that Gibson used in their 1946 ES125 guitars and uses rod magnets and 42AWG coil wire, with 10000 turns for the neck position, 11000 for the middle and 12200 for the bridge. A blend of "Gibson meets Fender". A favorite for the neck position in a Tele® and just perfect for a lap steel! A choice of all A5 rod magnets for the most output and aggressiveness, or a blend of A5 rod magnets for the bass strings (E/A/D) and A3 rod magnets for the treble strings (G/B/E) that allows a sweeter high end, or all A3 rod magnets for the most string to string clarity. Supplied with covers (a choice of black or cream) and body mounting screws with both height springs and tubing.
More on the Cavalier site here: cavalierpickups.com
In this video I'm using a MIM Telecaster through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. For some dirt I'm using the LPD Sixty8 Deluxe and a Line 6 Echo Park for delay.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Mythos Pedals: mythospedals.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Another video featuring some new pickups from Cavalier Pickups. The She Wolf is wound with 9000 turns of AWG42 wire around A5 rod magnets. Just like 'The Wolf' but without the cover. I actually played a few similar chords in the beginning of the video so if you are deciding between the two, then open two browsers and flip back and forth to hear how the cover can affect the sound. Designed to offer some Strat flavor to your tele neck. It is paired with the Fat Lion Bridge from Cavalier. Keep that in mind when you hear the the middle position sounds. Plenty more cavalier tones on my channel so be sure to check out all the videos I've done with Rob. You can find more information about this pickup and all his options here:
cavalierpickups.com
In this video I'm using a MIM Telecaster through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. In the last clip I turn on the Paul C. Tim v1 for just a little grit.
Amp: vintagesoundamps.com
Speaker: https://www.eminence.com/speakers/spe...
LPD Pedals: https://www.lpdpedals.com/store/p/cas...
Cables: https://www.EQcable.com
Strings: https://www.sheptone.com/collections/...
This is the first of several videos coming featuring some new pickups from Cavalier Pickups. The Wolf is wound with 9000 turns of AWG42 wire around A5 rod magnets. Designed to offer some Strat flavor to your tele neck. It is paired with the Fat Lion Bridge from Cavalier. Keep that in mind when you hear the the middle position sounds. Plenty more cavalier tones on my channel so be sure to check out all the videos I've done with Rob. You can find more information about this pickup and all his options here:
cavalierpickups.com
In this video I'm using a MIM Telecaster through a Vintage Sound 22SC amp loaded with an Eminence GA-SC64 Speaker. Reverb is from a LPD Pedals Cascade. In the last clip I turn on the Paul C. Tim v1 for just a little grit.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
If you follow my channel, I think we have established that pickups can drastically change a guitar's sound and feel. But this video is about some other things and they made such an audible difference I decided to post them.
My Friend wanted me to make some improvements to his Mexican Telecaster. He said it felt like a total dud compared to his other guitars even though it played well. I took a look and he was right. It sounded like cardboard. The first thing I did was pulled the control plate off and removed the potentiometers and cap. The stock volume pot was only 176k. The ideal pot is around 250k. That's a tone of High-end content being lost. So I replaced those with 250 CTS pots and a PIO cap from Mojotone.com.
The difference was pretty drastic. But I figured why not change the bridge/saddles to something that was machined for actual tone and not just to build thousands of guitars a month. I swapped the bridge plate for a bridge plate from Advanced Music Products, and then installed some Callaham compensated steel saddles. FWIW, you don't have to use these high-end of parts. The normal Fender steel bridge plate is $10 on amazon, and you can get some good steel saddles like Gotoh, Wilkinson or the Advanced Music Products from Philadelphia Luthier.
If you know how to solder, you can do these upgrades for less than $100 with shipping included. Probably WAY less depending on the parts you choose. Changing pickups is great, but you are still limiting them to what other components are on the guitar. Everything matters!
In this video I'm using my Vintage Sound 22SC and a LPD Pedals Cascade Reverb for all the clips. The setting on the amp and mic placement didn't change between filming and I re-used the same strings for every upgrade.
Thanks for watching!
Zhangbucker site: http://www.zhangbucker.com/t-bucker.html
I'm using my R7 into my Vintage Sound Amps 22sc with an LPD Pedals Dutch Overdrive and Cascade for reverb.
Amp: vintagesoundamps.com
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC64
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Also - New look for the channel! I'm going to start uploading most videos in 4K!
Recording gear:
Sony ZV-E10
Canon 80d
Sigma 16mm F1.4
Sigma 18-35 F1.8
Sennheiser e-609
Apollo Twin
The controls are Volume, Dirt, Hi-Cut and Thin-Thick. The Thin-Thick controls how much low end goes through the circuit and the Hi-Cut gives the option to cut high end out the output if needed, which is very useful because the dirt knob isn’t wired the same as a traditional Fuzz Face and retains lots of high-end as you roll it back. All of this is to say that this pedal can be really useable with lots of different guitars and amps. It will do the FF thing, but a lot more.
Muleskinner: facebook.com/muleskinneramps
Instagram: @Muleskinneramps
I’m using several guitars, all going through the Muleskinner MS17 set to clean with an Eminence GA-SC59 speaker. I added some Reveb in Logic. All guitars have Sheptone Strings as always.
Cheers and thanks for watching! Please consider subscribing if you haven’t.
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC59
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
I'm using my Frank Brother's Arcade with Righteous Sound RAFs (A4), through my Muleskinner 17w tweed. For the solo, I have on the Muleskinner Ass Face Fuzz pedal and the LPD OFFSET Delay.
Thanks to my pal Jim for capturing a second angle. Such a fun night!
No, this isn't a sponsored video. I try to never use the word "best" here on the channel but this time I'm going on record. I spec'd this guitar in April of 2021, and it was delivered the first week of October. I've had it for almost two months and spent that entire time comparing it to my other guitars. The fit and finish on the Arcade is completely flawless..But this Arcade as an instrument is the most musical guitar I've ever owned. It is probably 15% louder than my most resonant guitar (not plugged in). I had never seen or played a Frank Brother's in person, but I just had a feeling that going in blind was worth it. Turns out, I was correct.
**All photos in this video were provided by Frank Brothers before it shipped** - which is part of the cool experience of watching it being built from start to finish. Thanks Tim, Nick and crew!
If you aren't familiar with the company you can find them on instagram, but here is a link to the official site: frankbrothersguitars.com
Pickups: http://righteoussoundpickups.com
Bridge: schroederguitarhardware.com
I spec'd out my Arcade with the following appointments:
5A flame maple top in Burnt Amber finish, multi-ply binding on the top, and off white on the neck and headstock, Macassar ebony fretboard and book matched headstock, Schroeder original wraptail and Righteous Sound RAFs with A4 magnets. There are more details but those are the important ones!
Thanks for watching and I look forward to filming and gigging with this guitar for a long, long time so stay tuned!
In this video I'm using my Vintage Sound 22sc with a Greer Lightspeed always on. LPD Reverb and El Capistan always on. Added some extra drive with the LPD Dutch OD. Everything into UA OX.
LPD: lpdpedals.com/store/p/cascade
Greer: greeramps.com
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
You can find these sets on his Reverb page:
reverb.com/shop/davids-gear-depot-26
I'm using the my '63 Tele Replica into my Muleskinner MS17 with an Eminence Alessandro GA-SC59. Mythos Mjilnor for a little clean boost and then the Mythos Olympus for drive tones. LPD Pedals Cascade for reverb.
Tele: The Gear Page: thegearpage.net/board/index.php?members/baiff.125358
Muleskinner: facebook.com/muleskinneramps
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC59
Ovedrives: https://mythospedals.comhttps://mythospedals.com
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
Zhangbucker site: http://www.zhangbucker.com/t-bucker.html
I'm using my R7 into my Muleskinner MS17, with an Eminence GA-SC59. BJFe Honey Bee for some drive and the LPD Pedals Cascade for reverb.
Muleskinner: facebook.com/muleskinneramps
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC59
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
lpdpedals.com
Backing track was provided from Youtube user @nowyoushred. Thank you, Renzo for letting me you use your track. Download this backing track here: nowyoushred.bandcamp.com
Gear:
Custom Ceriatone Plexi50 Bass: http://www.ceriatone.com
Fifty-65 Custom Guitars Tele Replica: thegearpage.net/board/index.php?members%2Fbaiff.125358%2F
60th Anniversary 1959 Les Paul R9
Cousin Dave Tele Pickups: reverb.com/shop/davids-gear-depot-26?utm_source=rev-ios-app&utm_medium=ios-share&utm_campaign=shop&utm_content=39830
Vintage Inspired Pickups Lovers: vintageinspiredpickups.com
LPD Cascade Reverb: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
El Capistan
UA OX
Thanks so much for watching. Please subscribe if you feel so inclined!
vintageinspiredpickups.com
To order these, you'll need to get on the mailing list and be quick!
Mailing list: vintageinspiredpickups.com/contact
I'm playing these through a Muleskinner 17w and an Eminence GA-SC59. I am using the LPD Pedals Cascade for reverb and a BJFe Flametop for an extra push towards the end of the vid.
Muleskinner: facebook.com/muleskinneramps
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC59
LPD Pedals: lpdpedals.com/store/p/cascade
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
More about the Cascade here: lpdpedals.com/store/p/cascade
Make sure to join the LPD Newsletter for limited editions pedals and Flash Friday Sales!
Sign up here: lpdpedals.com
I'm using my PRS SE Hollowbody Standard with Lust For Tone Pickups. Vintage Sound 22sc amp into OX. EQ Cables and Sheptone Strings like normal.
Thanks so much for watching! Please subscribe if you haven't!
Using the LPD Pedals Cascade for Reverb and the Embers for a K style push in to the tweed. EQCables and Sheptone strings (which I've had on the guitar for about 3 months, and that's just unheard of. HIGHLY SUGGESTED to check out the strings from Sheptone!)
LPD Pedals: lpdpedals.com/store/p/cascade
Muleskinner: facebook.com/muleskinneramps
Speaker: eminence.com/speakers/speaker-detail/?model=GA_SC59
Cables: https://www.EQcable.com
Strings: sheptone.com/collections/strings
I'm using a PRS Standard SE with Lust For Tone '59 Lustbuckers. The Amp is a Vintage Sound 22sc with an Eminence GA-SC64 speaker. EQ Cables and Sheptone strings! The Pedals are listed here in order of the signal chain. Enjoy!
Source Audio Spectrum: sourceaudio.net/spectrum_intelligent_filter.html
Mythos Pedals Argo: mythospedals.com/argo
LPD Pedals Embers:lpdpedals.com/store
Greer Lightspeed: greeramps.com/collections/pedals/products/lightspeed
LPD Pedals Dutch: lpdpedals.com/store/p/lpd-dutch
Mythos Olympus: mythospedals.com/olympus
Peterson Tuner: petersontuners.com/products/strobostomphd
Walrus Monument Tremelo v2: walrusaudio.com
Mythos Oracle Analog Delay: mythospedals.com/oracle
LPD Pedals Cascade Reverb: lpdpedals.com/store/p/cascade
Sheptone Strings: sheptone.com/collections/strings


