VA3BHYI made this video to hopefully assist some #YAESU #FT-891 owners with older firmware. Updating to the latest firmware was recommended by #YAESU. This is the reason why I illustrated to check your firmware first to see if you need to update. If you already got the latest firmware, THERE IS NO NEED TO PERFORM THIS UPDATE. If you are not confident after watching this video: DO NOT UPGRADE. This is not for a newbie with very limited technical / computer skills. Watch this video completely and please be honest to yourself. If you think you cannot do it, then please DON'T. Reminder: UPDATE AT YOUR OWN RISK.
#HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891
Update The Firmware Of Yaesu FT891VA3BHY2024-12-19 | I made this video to hopefully assist some #YAESU #FT-891 owners with older firmware. Updating to the latest firmware was recommended by #YAESU. This is the reason why I illustrated to check your firmware first to see if you need to update. If you already got the latest firmware, THERE IS NO NEED TO PERFORM THIS UPDATE. If you are not confident after watching this video: DO NOT UPGRADE. This is not for a newbie with very limited technical / computer skills. Watch this video completely and please be honest to yourself. If you think you cannot do it, then please DON'T. Reminder: UPDATE AT YOUR OWN RISK.
#HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891 #HOW TO #UPDATE THE #FIRMWARE OF #YAESU #ft891I Build A Meshcore/Meshtastic Repeater Housed In A Cheap ABS Plastic Pipe. You Can Too.VA3BHY2026-11-10 | In today’s video, I’m going to show you how to build a rugged, outdoor Meshtastic or Meshcore repeater using the Heltec V4 and a standard ABS plastic pipe. This build features an upgrade to the antenna system: an improved ground plane created simply using aluminum duct tape. Plus, it is designed to run directly on a 5V DC external power source via USB-C, making it perfect for permanent outdoor deployments. To start, I took a 40-millimeter—or one-and-a-half-inch—ABS end cap and drilled a hole right through the center, sizing it perfectly to mount our SMA antenna connector. Flipping the end cap over, you can get a better look at the inside where the components will sit. For the ground plane, I’m using standard heavy-duty aluminum duct tape, which will provide a great conductive surface for the antenna. Next, I placed the cap directly onto the tape and used a pen to trace around its outer edge. Using a pair of scissors, I carefully cut along the traced line to create a perfect circular insert. Then, I peeled off the backing and pressed the aluminum circle firmly into the inside bottom of the cap. Flipping the cap back over, you can see that the original drilled hole is now completely sealed and covered by the conductive tape. I turned the cap around one more time and punched a clean hole through the tape from the inside to clear the path for the SMA connector. Finally, I used an ohmmeter to check the tape for proper electrical continuity. The meter beeps when it detects a short ... and as you can hear, this aluminum tape is highly conductive and ready to act as our ground plane. Now, let’s assemble the SMA antenna mount. I inserted the connector through the cap, threaded the nut and tightened it down securely with a pair of pliers. Let's do a quick continuity test between the ground plane and the SMA connector itself—perfect, we have a solid electrical connection. Next, it's time to connect the pigtail to the Heltec V4 module. Be incredibly careful here: make sure you perfectly align these tiny UFL connectors before applying any downward pressure. Never use tools for this step. Your fingernails are more than enough to press them together. You’ll feel and hear a distinct click when they properly seat. Let’s walk through some of the physical measurements for this build. First, for the internal support structure, I’m using a wooden shim that is 305 millimeters or 12 inches long. This USB-C to USB-C extension cable measures 152 millimeters, or 6 inches, which will link our board to the waterproof bulkhead connector. Speaking of the antenna wire, the length from the SMA mount down to the Heltec V4 is about 203 millimeters, or 8 inches. For the main housing, we have our 40-millimeters or one-and-a-half-inch ABS pipe, cut to a length of 330 millimeters, or 13 inches. Here is how everything layouts during preassembly: the Heltec module and the USB-C extension cable will both mount directly onto the wooden shim, keeping the guts of the repeater neat and structurally secure. To secure the Heltec V4 to the shim, I just used a standard nylon zip tie. I also added a dab of hot glue along the thin antenna wire. This acts as a strain relief, eliminating any structural tension on the delicate module and the SMA connector. Moving to the bottom of the build, this is how I mounted the pass-through USB-C barrel power connector directly into the center of the bottom end cap. Flipping that same end cap over, you can see the outside profile of the USB-C bulkhead. It features a threaded locking nut and comes with a rubber sealing cover to keep moisture completely out of the port when it's not plugged in. Time for the final assembly. Carefully slide the wooden shim structure entirely inside the ABS pipe, and press-fit the top antenna cap into place. Next, go ahead and screw your 915 MHz LoRa antenna onto the external SMA connector. On the bottom end of the pipe, grab the cap featuring your USB-C bulkhead, plug the internal USB-C extension cable firmly into the back of it, and seal up the bottom cap. And that is it! The build is complete. This rugged, weather-resistant repeater is officially ready to head outdoors, get mounted, and expand the local mesh network. Thanks so much for watching! If you enjoyed this build, please hit that like button, and I hope this video inspires you to build your own node and join the mesh. See you in the next one!I Built A Meshcore Repeater In A Conduit Junction Box Powered By A 5v DC SupplyVA3BHY2026-10-24 | This video will demonstate how I built a #meshcore #repeater using the #Heltec V4 using very simple components. I used a PVC conduit junction box 1/2 in diameter readily available on most hardware stores . The junction box comes with weather proof seal. The PVC used is a UV resistant plastic material, designed to handle the outdoor weather. I elected to use a reliable 5V DC power supply connected to the grid instead of a solar panel to power my repeater, but just in case of an outage, I designed this to be easily powered by a 16850 lithium batteries. I hope this build will inspire you to build your own repeater and hope you join the mesh.DIY: Make Your Own RF Dummy Load And Save Money $$VA3BHY2026-10-17 | This video, I will be showing how I made my own dummy load for less than $10.00 using an old heatsink, an S0239 and an RF resistor 50 ohms 100 watts. I purchased the resistor and the S0239 from Amazon. The heatsink is an old scrap.I Tested Common LoRA Antennas, So You Dont Have To!VA3BHY2026-10-10 | Testing various LoRA antenna to see which is the best to use in our #LoRA project. Be it with #Theremeshtastic or #meshcore. If you want to get the winner, here my Amazon affiliate link: https://link.amazon/B02geYLUbHow To Create A Meshcore Observer Step By Step TutorialVA3BHY2026-10-01 | How To Create A Meshcore Observer Step By Step Tutorial. This video will show you how to make your first Meshcore Observer. Observers are important in Meshcore network. They provide logs and reports that are useful for analyzing the meshcore traffic in your area. It is programmed as a repeater but the repeating function is disabled. I hope you join our meshcore. Thanks for watching.Meshcore Trace Path Explained.VA3BHY2026-09-24 | This video will show how to trace the path taken by a meshcore bot when sending a reply to nodes that are sending a test or ping requests. #meshcore #mesh #hamradio #electronicBuild Your OffGrid Meshcore Solar Node Repeater. Join The Mesh. SUPER EASY.VA3BHY2026-09-17 | BUILD YOUR OWN #meshcore #repeater AND JOIN THE MESH. SUPER EASY. BE YOUR OWN ISP. #offgrid #communication using simple cheap components and LORA technology. No licensing required. Fully encrypted.Meshcore Repeater: Set Your Regional Network Settings ProperlyVA3BHY2026-09-11 | #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeaters #meshcore #repeater #repeatersHow To Setup A Meshcore Repeater (A Beginners Guilde)VA3BHY2026-09-04 | I made this video to show how to setup a Meshcore repeater using the website meshcore.ca as a guide. #meshcore #repeaters #repeaterMeshcore TestingVA3BHY2026-08-28 | This video will demonstrate how to test and verify the Meshcore installation and programming using two Heltec V3 companion bluetooth nodes and two smartphones with a Meshcore app installed and setup.CONVERT MESHTASTIC TO MESHCORE - SUPER EASY! MESHCORE IS AN OFFGRID PRIVATE AND SECURE SYSTEMVA3BHY2026-08-21 | This video will show you how to convert your meshtastic devices to meshcore. It is easy since all the meshtastic devices are compatible with meshcore. I like meshcore because of its structured approach to communications. I hope you like, enjoy and learn from this video. This is Allan VA3BHY. 73How To Become A Certified Amateur Radio Operator In Canada - Tutorial Series - Part 1VA3BHY2026-06-12 | Want to talk to astronauts on the International Space Station, assist during local emergencies, or chat globally without cell towers or the internet? 🇨🇦 In this video, I break down exactly how to become a licensed ham radio operator in Canada step-by-step! Getting your Amateur Radio Operator Certificate from ISED Canada is easier than you think, valid for life, and costs nothing to renew. I'll show you how to study for free, how to guarantee you unlock the global high-frequency (HF) bands on your first try, and how to take your exam online right from home!
Drop a comment below letting me know which province you are testing from! If you found this video helpful, please give it a LIKE and SUBSCRIBE for more amateur radio content. 73! #HamRadioCanada #AmateurRadio #HamRadioLicense #ISEDCanada #RadioAmateursOfCanada #STEMCanada
how to get ham radio license canada, amateur radio certificate canada, ised canada ham radio, radio amateurs of canada, canadian ham radio exam, basic qualification exam canada, ham radio study guide canada, amateur radio operator certificate, ve3 ham radio, ised exam generator, take ham radio exam online, amateur radio canada regulations, ham radio honours mark, learn ham radio canada, canadian call sign lookup,amateur radio, vhf uhf hf canada, emergency communications canada, beginner ham radio guide canadaHow to Multiply Using Your Hands | Easy Math HackVA3BHY2026-06-08 | Struggling to remember your multiplication tables? Stop guessing and put the calculator away! In this video, you will learn a simple hand trick to solve your hardest multiplication problems (like 7x8 and 6x7) in seconds using nothing but your fingers.No memorization or charts required! Perfect for students, parents helping with homework, or anyone who wants a quick mental math hack.If this math shortcut helped you, please give this video a LIKE and SUBSCRIBE for more easy learning tips!
#MathHacks #MultiplicationTrick #MentalMath #MathShortcuts #StudyTipsI Built a Heltec Tracker Case for $0... Here’s How!VA3BHY2026-06-02 | Want a rugged, functional case for your $30 Heltec Tracker without spending a dime? In this video, I’ll show you how to upcycle the original plastic packaging into a custom DIY enclosure complete with battery integration, a power switch, antenna flexibility, and ventilation! The Heltec Tracker is an incredible $30 device packing LoRa, GPS, Bluetooth, Wi-Fi, and an OLED display. But you don't need an expensive 3D printer or a costly aftermarket case to protect it. Follow along as I walk you through the step-by-step modifications, including drilling for SMA connectors, cutting an OLED viewing window, adding dual parallel lithium-ion batteries, and utilizing the built-in USB-C charge regulator. If you enjoyed this budget-friendly tech hack, please Like, Comment your thoughts, and Subscribe for more DIY hardware projects!
#amazon #amateur #hamradioantenna #hamradiooperator #hamradioThis Is Why I Prefer My 21.64 m / 71 ft Long Wire Antenna Cheap, Easy. World Wide Reach (PSK Report)VA3BHY2025-10-11 | How I build it: youtu.be/n8dJYJJaSTg The measurements: youtu.be/szvoNYhziDQI Installed An Antenna To A 2024 Mitsubishi Outlander Without Drilling Any Holes.VA3BHY2025-10-09 | I installed an antenna to my 2024 Mitsubishi Outlander without drilling any holes. This SUV is not friendly to ham radio antennas. The roof is 98% glass and the body is aluminum and plastic. The panel gaps are very tight and with weird angles. Is it hard? Watch this video and find out.WSJTX (FT8) Complete Tutorial Video Series Part 12VA3BHY2025-10-07 | WSJTX (FT8) Complete Tutorial Video Series Part 12 the final video of the series.WSJTX (FT8) Complete Tutorial Video Series Part 11VA3BHY2025-10-04 | WSJTX (FT8) Complete Tutorial Video Series Part 11YAESU FTM-150RASP S-DX WITH NOISE CANCELLING AND DIGITAL AUDIO PROCESSING ANY GOOD?VA3BHY2025-09-23 | YAESU FTM-150RASP S-DX WITH NOISE CANCELLING AND DIGITAL AUDIO PROCESSING ANY GOOD? #hamradio #hamradioantenna #yaesu #hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesu#hamradio #hamradioantenna #yaesuYAESU FTM-150R ASP UNBOXING VIDEOVA3BHY2025-09-21 | YAESU FTM-150R ASP UNBOXING VIDEO
#yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #ham #yaesu #radio #hamradio #hamWSJTX (FT8) Complete Tutorial Video Series Part 10VA3BHY2025-09-17 | This is a series of videos that will cover the complete tutorial on how to install, setup and operate wsjtx on your laptop for field operations. This is Part 10DROIDSTAR LOWERS THE ENTRY BARRIER TO DMR NETWORKSVA3BHY2025-09-13 | Want to try DMR without building any hotspot, buying digital dmr radios and connecting to dmr repeaters? DROIDSTAR is your answer. Watch this.HOME MADE BASE LOADING COIL TEST RESULT PART 3VA3BHY2025-09-11 | I am at Kelso Summit Conservation Park to perform a Parks On The Air activation. I am also going to test my DIY Base loading coil and see how it performs on 40 meters.
Material Used: Antenna Kit amzn.to/4mt4EUFThe Assembly Of My DIY Loading Coil for 80 and 40 Meters For POTA Field Operation ( PART 2 OF 3 )VA3BHY2025-09-10 | The Assembly Of My DIY Loading Coil for 80 and 40 Meters For POTA Field Operation
Components used in this video: The antenna kit: amzn.to/4mt4EUF
During my POTA activations, I usually use my 5.33 meter vertical antenna which is resonant on 20 meters. However, sometimes, 20 meters is very noisy, busy and depending on the time of day, not very good for DX contacts. Sometimes, I want to try the 40 meters or even the 80 meters but I can't because I don't have a loading coil. So I decided to MAKE ONE. I used this on my POTA activation. It worked well at 40 meters and resonant at 3.5 MHz which is 80 meters. Comment: PVC vs ABS : Functionally there is no difference at all. Both convey sewage. Both don’t corrode. Both are glue joints. So both work fine. Beyond that it is likely regional. If an area uses PVC, that is what the plumbers are used to so that is what they use so that is what is stocked so that is cheaper so that is why the area uses PVC.