Uploaded May 2026 | Updated September 2026, 2 weeks ago
🛒 Order the Anycubic Kobra 4 here: geni.us/AnycubicKobra4
And Check Out AliExpress for the *LOWEST PRICE*: geni.us/AnycubicKobra4AX
🛒 Or the Kobra X: geni.us/Anycubic-KobraX (UPDATE: PRICES SLASHED!)
*GET $25/£15 off sitewide with Code* "FAUXHAMMER"
Check the Kobra X Review Here: youtu.be/Oiv2JWAgcdo
No Time to Watch? *Check our Written Review Here:* - fauxhammer.com/reviews/anycubic-kobra-4-review-a-perfectly-fine-printer-that-probably-shouldnt-exist
*Mandatory YouTube Description for Ad Placement*
🤖 Start Meshy-ing at 50% off here: geni.us/MeshyAd1 🤖 from @MeshyAI
Looking for the best AI tool to design 3D print models? Meshy 6 turns text prompts and images into print-ready STL files in minutes — no modeling skills needed.
✅ AI 3D model generator ✅ Multi-color 3D printing (Bambu Lab) ✅ Custom pose feature ✅ Now on MakerWorld
Best AI tool for: 3D print model design / create 3D printer files / AI 3D modeling for beginners / Bambu Lab workflow
*Video Description*
This printer shouldn’t exist.
And I don’t mean that because it’s bad.
I mean because Anycubic already released the Kobra X… which makes this thing immediately feel awkward.
Because on paper, the Kobra 4 is completely fine.
Modern bedslinger.
Multi-material support.
Camera.
WiFi.
Orca-based slicer.
Decent print quality.
Reasonable pricing.
If this had launched before the Kobra X, people probably would’ve accepted it.
Instead, it launches after a machine that already solved several of the biggest annoyances people have with modern machines
Which immediately raises one huge question:
Why would you buy this instead?
So in this review I test the Kobra 4 properly, compare it directly against the Kobra X, look at the ACE 2 Pro setup, check real-world purge waste, test print quality, multi-colour performance, setup experience, slicer workflow, and figure out whether this thing actually deserves a place in Anycubic’s lineup… or whether it’s just diluting one of their most successful launches ever.
Because this isn’t really competing against Bambu.
It’s competing against Anycubic’s own better idea.
And honestly… that’s a much harder fight.
As always, if you decide to pick one up, using the affiliate links above & below supports the channel at no extra cost to you and lets me keep doing independent, brutally honest reviews instead of turning into a corporate brochure. I genuinely appreciate everyone who uses them.
💛 Join this channel to get access to perks
youtube.com/channel/UC_9Jsf3SP8aMJgn0xv5jHjA/join
🧠 Full “Best 3D Printer for Miniatures” series
fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models
🌍 FauxHammer online
Website - fauxhammer.com
#Meshy6 #MeshyAI
🛒 Order the Anycubic Kobra 4 here: geni.us/AnycubicKobra4
And Check Out AliExpress for the *LOWEST PRICE*: geni.us/AnycubicKobra4AX
🛒 Or the Kobra X: geni.us/Anycubic-KobraX (UPDATE: PRICES SLASHED!)
*GET $25/£15 off sitewide with Code* "FAUXHAMMER"
Check the Kobra X Review Here: youtu.be/Oiv2JWAgcdo
No Time to Watch? *Check our Written Review Here:* - fauxhammer.com/reviews/anycubic-kobra-4-review-a-perfectly-fine-printer-that-probably-shouldnt-exist
*Mandatory YouTube Description for Ad Placement*
🤖 Start Meshy-ing at 50% off here: geni.us/MeshyAd1 🤖 from @MeshyAI
Looking for the best AI tool to design 3D print models? Meshy 6 turns text prompts and images into print-ready STL files in minutes — no modeling skills needed.
✅ AI 3D model generator ✅ Multi-color 3D printing (Bambu Lab) ✅ Custom pose feature ✅ Now on MakerWorld
Best AI tool for: 3D print model design / create 3D printer files / AI 3D modeling for beginners / Bambu Lab workflow
*Video Description*
This printer shouldn’t exist.
And I don’t mean that because it’s bad.
I mean because Anycubic already released the Kobra X… which makes this thing immediately feel awkward.
Because on paper, the Kobra 4 is completely fine.
Modern bedslinger.
Multi-material support.
Camera.
WiFi.
Orca-based slicer.
Decent print quality.
Reasonable pricing.
If this had launched before the Kobra X, people probably would’ve accepted it.
Instead, it launches after a machine that already solved several of the biggest annoyances people have with modern machines
Which immediately raises one huge question:
Why would you buy this instead?
So in this review I test the Kobra 4 properly, compare it directly against the Kobra X, look at the ACE 2 Pro setup, check real-world purge waste, test print quality, multi-colour performance, setup experience, slicer workflow, and figure out whether this thing actually deserves a place in Anycubic’s lineup… or whether it’s just diluting one of their most successful launches ever.
Because this isn’t really competing against Bambu.
It’s competing against Anycubic’s own better idea.
And honestly… that’s a much harder fight.
As always, if you decide to pick one up, using the affiliate links above & below supports the channel at no extra cost to you and lets me keep doing independent, brutally honest reviews instead of turning into a corporate brochure. I genuinely appreciate everyone who uses them.
💛 Join this channel to get access to perks
youtube.com/channel/UC_9Jsf3SP8aMJgn0xv5jHjA/join
🧠 Full “Best 3D Printer for Miniatures” series
fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models
🌍 FauxHammer online
Website - fauxhammer.com
#Meshy6 #MeshyAI
