(VIDEO 1 of 2) The Airport Traffic PatternThe UND AeroCast2026-11-21 | (VIDEO 1 of 2) The Airport Traffic PatternVFR and IFR Traffic Separation at Satellite AirportsThe UND AeroCast2022-01-27 | Whether you are doing VFR pattern work or practicing instrument approaches it takes all pilots at satellite airports to work together to keep a smooth flow of traffic. This week we go over some tips on how to work together to keep that flow going.Spring 2022 Semester IntroThe UND AeroCast2022-01-13 | Lets jump into the Spring 2022 semester at UND Aerospace. We will be continuing to release Three Minute Thursday videos every two weeks for all of our aviation students at the University of North Dakota.UND Aerospaces primary trainer: The Piper ArcherThe UND AeroCast2022-01-10 | Check out our primary trainer the Piper Archer!2021 Fall Semester Wrap UpThe UND AeroCast2021-12-02 | As we end another semester at UND Aerospace we can reflect on the past and look to the future as the Spring Semester will be here before you know it!Do Not Neglect the Wind: VFR Traffic Pattern OperationsThe UND AeroCast2021-11-18 | This weeks episode discusses how wind can effect traffic pattern operations and why it is crucial to make proper corrections on all legs of the traffic pattern.Do Not Neglect the Wind: UND VFR departure procedureThe UND AeroCast2021-11-04 | The wind is a force that as pilots we are constantly battling. This week we begin a series on the importance of monitoring and correcting for the wind in all phases of flight. Todays episode will cover the UND VMC departure procedure and why it is crucial that we do not neglect the wind.Steep Turns Tips and TricksThe UND AeroCast2021-10-21 | Steep turns are a maneuver that is practiced throughout a pilots training. This week we take a look at some tips and tricks for steep turns in the Piper Archer.2021 Fall Safety WeekThe UND AeroCast2021-10-07 | This weeks Three Minute Thursday is a special edition for the 2021 Fall Safety Week at UND Aerospace. The full video is only for UND Students, Staff, and Faculty and can be found on the UND Blackboard page. Our normally released content will resume on October 21st. See you then!DME Arcs in the IFR environmentThe UND AeroCast2021-09-23 | While often viewed as a mundane task, Arcing in the IFR environment can feel complicated to the new instrument pilot. This week we take a look at the fundamentals of flying the perfect Arc.Bird Strike AvoidanceThe UND AeroCast2021-09-09 | Each Fall and Spring mean migration for thousands of ducks and geese through North Dakota. Sharing our skies with not only airplanes, but also birds, becomes a challenge and understanding how to limit the risk of collision and what to do if a bird strike occurs is this weeks topic.
Link to FAA reporting site: wildlife.faa.gov/addWelcome Back 2021 Fall SemesterThe UND AeroCast2021-08-26 | Welcome back to all of our UND Aerospace students for the start of the 2021 Fall semester. This semester 3 Minute Thursdays will be released every two weeks with a variety of topics. Subscribe to stay up to date!
New TCO Information:
https://aero.und.edu/aviation/current-students/flight-training-changes.htmlThree Minute Thursday Spring Semester Wrap upThe UND AeroCast2021-05-13 | With our first full semester of Three Minute Thursday videos complete we will be taking a break from weekly releases over the summer. We will back full time again this August for the fall semester. Limited releases will be coming out over the summer as we branch out into other areas of aviation training so be sure to subscribe! Thank you for everyone's support and we look forward to putting even more content in the future!Chandelles: Rudder UseThe UND AeroCast2021-05-06 | The Commercial Pilot ACS references coordination throughout Chandelle's. This week we focus on why rudder input is different for a Left Chandelle verses a Right Chandelle.Eights on Pylons: Tips and TricksThe UND AeroCast2021-04-29 | Feeling intimidated by Eights on Pylons? This week we cover a few of the tips and tricks to being successful during this commercial maneuver.Eights on Pylons: Getting SetupThe UND AeroCast2021-04-22 | In this episode of Three Minute Thursday, learn how to efficiently setup and enter Eights on Pylons.VFR Maneuver setup: The CARS acronymThe UND AeroCast2021-04-15 | Just like the perfect landing, a perfect maneuver begins well before you actually enter the maneuver. This week we cover the CARS acronym and how to get yourself setup for all VFR Maneuvers.IFR Holding Part 5: Distance Holding ExampleThe UND AeroCast2021-04-08 | We wrap up our holding series with another real world example in the Grand Forks area. This week we take a look at setting up the GPS for a distance hold.IFR Holding Series Part 4: Timed Holding ExampleThe UND AeroCast2021-04-01 | Its time to put your holding knowledge to use in a very common scenario flown in the Grand Forks area. Today we run through the proper way to execute a timed hold scenario.IFR Holding Series Part 3: Wind Correction AngleThe UND AeroCast2021-03-25 | This week we review the proper way to determine the proper wind correction angle on the outbound leg of your holding pattern and the difference between Distance and Timed holding patterns.IFR Holding Series Part 2: Holding EntriesThe UND AeroCast2021-03-18 | This week we simplify and explain the proper way to enter an IFR Holding Pattern.IFR Holding Series Part 1The UND AeroCast2021-03-11 | Join us as we introduce IFR Holding and take a look at how groundspeed changes the shape of your holding pattern. We will also discuss making proper timing corrections for the perfect one minute inbound leg.Control Inputs while TaxiingThe UND AeroCast2021-03-04 | Wind effects the aircraft long before starting the takeoff roll. This week we review the proper control inputs while taxiing in all wind conditions.Foot Position while flyingThe UND AeroCast2021-02-25 | Ever wondered why you may have over corrected while steering back to the center line after a landing? Have you ever had to keep in a large amount of power while taxiing? If the answer is yes then you may need to adjust your foot position on the rudder pedals to prevent these and other issues due to improper foot position in the aircraft.Landing Series Part 5: The Touchdown and RolloutThe UND AeroCast2021-02-18 | In the final video of our landing series we wrap things up with a reminder that even after you roll it on the runway you still aren't done flying! Staying in control during the rollout is crucial to finishing that perfect landing.Landing Series Part 4: The FlareThe UND AeroCast2021-02-11 | Our 4th video in the landing series takes a look at the appropriate pitch attitude for one of the hardest parts of the landing, the perfect Flare.Landing Series Part 3: The RoundoutThe UND AeroCast2021-02-04 | Part 3 of our landing series breaks down a critical part of the final approach to landing, the Roundout.Landing Series Part 2: From 200 ft. AGL to the RoundoutThe UND AeroCast2021-01-28 | Part 2 of our landing series continues the journey to the perfect landing with breaking down the landing profile from 200 ft. AGL to the start of the Roundout.Landing Series Part 1: From your Abeam Point to 200 FT. AGLThe UND AeroCast2021-01-21 | Part 1 of our landing series reminds us that the start of a perfect landing begins with the perfect traffic pattern. Join us as we focus on the Traffic Pattern starting from the Abeam Point down to 200 FT. AGL in the quest for the perfect landing.VFR Traffic Pattern Entry and ExitThe UND AeroCast2021-01-14 | Its back to the basics for VFR Pattern Entries and Exits in the first episode of Three Minute Thursday brought to you by UND Aerospace.Engine Failure: Takeoff RollThe UND AeroCast2017-08-31 | Double the engines and double the excitement! It's time to talk about multi-engine flying with a primer on an engine failure emergency while on the ground. In this UND AeroCast episode, UND Flight Instructor,Anthony Bottini, defines the term "light twin" and discusses performance and procedural considerations during the unlikely event of experiencing an engine failure during the takeoff roll. Using a brand-new UND Aerospace Piper Seminole, demo pilot and Flight Instructor, Brian Willis, demonstrates some runway engine cuts with smooth and controlled takeoff aborts and subsequent recoveries. Thanks for the help, Brian! Enjoy the show and as always, Have Fun and Fly Safe!Say Hello to UNDs New R44!The UND AeroCast2017-08-31 | Across the industry, the demand for professionally-trained helicopter pilots continues to grow. UND Aerospace is keeping pace by expanding and modernizing their rotorcraft fleet. Say hello to the brand-new Robinson R44 Cadet. The Cadet is the perfect trainer to get UND Aerospace students the experience they need to fly high-performance, technically advanced helicopters. UND Instructors Max Kahlamer and Wes Van Dell will fill you in on the details. Enjoy!Calling All Flight Instructors!The UND AeroCast2015-07-16 | UND provides outstanding opportunities for flight instructors to gain valuable experience and further their careers. With an emphasis on safety, standard operating procedures, and customer service, UND flight instructors are well-prepared for their next steps in the aviation industry. Year round, UND Flight Operations operates a fleet of over 100 aircraft. In 2013, UND conducted over 116,000 hours of training with over 900 students on the flight schedule. UND Flight Instructors average over 100 billable hours every month with an open opportunity to work more if you prefer. UND operates with a management culture that is based on teamwork rather than micro management.On Centerline - Where an airplane belongs...The UND AeroCast2015-06-18 | Hey AeroCast fans... If your airplane could talk, it would say that it misses centerline and desperately wants to go back. When left uncorrected, bad habits and techniques can lead to serious directional control issues during takeoffs and landings. Poor adherence to the runway centerline can many times lead to an unfortunate and prompt departure off the side of a runway which can snap a runway light, break your airplane or much worse. Use this latest AeroCast episode with your instructor to supplement your training and to gain a more solid foundation for proper techniques required to maintain centerline and directional control during takeoff and landing. Leave us some comments on YouTube and iTunes and let us know what you think of this episode and chime in if you have suggestions for future AeroCast content. Have Fun and Fly Safe!Commercial Lazy EightsThe UND AeroCast2015-05-13 | After a hiatus, the UND AeroCast is back! Capping the Commercial Maneuvers series of videos, Master CFI Mike Lents is back at it again. The Lazy Eights maneuver is anything but lazy. It's designed to teach the pilot how to keep the controls constantly moving while learning all about control precision and smooth pilot input. Understanding the anatomy of the maneuver is key, by planning ahead to hit certain values at different accuracy points. Wow, that's sounds like a lot of stuff. Watch the video to see the details of the Lazy Eight unfold. Let us know what you think in the comments. Have Fun and Fly Safe!Aviation Safety: A Layered ApproachThe UND AeroCast2013-10-14 | The massive, complex flight training operation conducted daily at UND Aerospace exists only because of many people working towards the common goal of achieving the highest standard of aviation safety. At UND, we understand that human flight, inherently, is a very dangerous undertaking - the mere notion is a bit absurd. But through decades of experience, we also know how to make it safe. This movie outlines the layered process of making every flight safe at UND Aerospace.Commercial Eights On PylonsThe UND AeroCast2013-08-09 | UND CFI's Mike Lents and Anthony Bottini take a deep dive into the Eights On Pylons maneuver in the Cessna 172SP and explore the various planning elements and pilot techniques that are necessary to make this maneuver work just right. Mastering this commercial maneuver is all about learning how to constantly divide your attention and control the aircraft smoothly and predictably.Helicopters!The UND AeroCast2013-02-28 | UND Aerospace helicopter instructor, Wes Van Dell, talks about helicopters, student training and shows off some sweet maneuvers in the Bell 206 turbine helicopter. For more information about the UND Aerospace Helicopter Department, visit www.fly.und.edu or www.aero.und.eduUND Aerobatics: Youre Next!The UND AeroCast2012-06-22 | UND student Chris Brauckman lets UND CFI Mike Lents wring him out. Aerobatics are awesome!Commercial ChandellesThe UND AeroCast2012-03-02 | UND CFI's Mike Lents and Anthony Bottini take you, the pilot, through the necessary steps to complete the Chandelle maneuver at the Commercial Pilot level in the Cessna-172. This performance maneuver plays a vital role in the pilot's training repertoire as it builds the skills necessary to smoothly and accurately control the aircraft, as well as teaches the pilot all about maneuvering at very high Angles of Attack, close to the stall margin. Enjoy this latest UND AeroCast episode and a huge thanks to Kevin and Brenda for another great batch of fan photos. Keep 'em coming!Commercial Steep TurnsThe UND AeroCast2012-01-04 | UND CFIs Mike Lents and Anthony Bottini team up again to bring our viewers the Cessna 172 UND Standardization lesson that's all about turning the airplane, well, steeply. This video hits all the important points that are necessary to review before attempting the Steep Turn maneuver in the C172 at the Commercial Pilot level. Thanks to Ammar from Amman, Jordan and to Justin from Grand Forks, ND for submitting some great photos. Have Fun and Fly Safe!Precision Instrument ApproachesThe UND AeroCast2011-09-14 | Matt Bogenreif and Anthony Bottini, both UND CFI's, discusse techniques and standardization for Precision Approaches.Faulty Approaches: Crosswind ConsiderationsThe UND AeroCast2011-07-08 | UND CFIs Mike Lents and Anthony Bottini round off the last part of the four part series: "Faulty Approaches and Landings." This final episode discusses numerous hazards that can threaten an otherwise solid approach when a crosswind condition is present. Since most approaches and landings are executed during some kind of crosswind situation, it is advised that each pilot use this episode to review crosswind landing techniques to really hone their crosswind skills and hopefully avoid crosswind hazards such as touching down in a crab, the dreaded ground-loop and/or experiencing a wing rise after touchdown. We hope you've enjoyed this four part series. Let us know what you thought by sending our UND AeroCast staff an email at undaerocast@aero.und.edu and stay tuned for a bunch of future episodes. By the way, as usual, a huge thanks goes out this time to Timothy and Bret for sending us some truly stunning fan photos. Thanks fellas!Spin Awareness TrainingThe UND AeroCast2011-02-25 | In this episode, Ryan Carlson, CFI, teaches Spin Awareness.Lazy EightsThe UND AeroCast2011-02-23 | In this episode, Anthony Bottini, CFI, teaches Commercial Lazy Eights.Well See You Up Here!The UND AeroCast2011-02-23 | UND Students and Instructors get together and talk about aviation, their passion for flying and all that is UND Aerospace.Steep SpiralsThe UND AeroCast2011-02-22 | In this episode, Anthony Bottini, CFI, teaches Commercial Steep Spirals..Eights On PylonsThe UND AeroCast2011-02-22 | Anthony Bottini, CFI, teaches Commercial Eights On Pylons.ChandellesThe UND AeroCast2011-02-22 | In this episode, Anthony Bottini, CFI, teaches Commercial Chandelles.Steep TurnsThe UND AeroCast2011-02-22 | In this episode, Anthony Bottini, CFI, teaches Commercial Steep Turns.Faulty Approaches: Nose-wheel HazardsThe UND AeroCast2011-02-09 | UND CFI's Mike Lents and Anthony Bottini team up again to bring to you the third episode of the four part series, "Faulty Approaches and Landings." Learn all about the hazards of landing in precarious attitudes that can threaten directional control and the structural of your nose-wheel. This episode highlights three situations where a pilot should exercise caution in regards to his or her nose-wheel to include Hard Landings, Porpoising and Wheelbarrowing. Enjoy this latest AeroCast episode and stay tuned for episode 4 of the Faulty Approach series. A huge thanks to Sam Wagener for submitting some fan photos of some random and picturesque northern-midwest flying.