Smart Wheel Repair for Kongsberg Chassis Multiplex System Monacoers 2024-01-23 | This video describes the repair the Smart Wheel functions on a Kongsberg CCM chassis multiplex coach with the addition of a separate 5VDC power supply. For more details on this repair, visit http://monacoers.orgThank you Eric Russell for making and sharing this video.
2025 Monacoers Gathering - Intellitec Multiplex Systems Monacoers 2025-07-29 | Frank McElroy and Paul Whittle cover both the Programmable Multiplex Control and non-programmable systems. Topics covered will include how each system works including the differences between the two systems, how the CPU is read and programmed, how the keypads work, how they are programmed, and real-world troubleshooting and repair solutions
Kongsberg Chassis Multiplex system Front Run Bay Current Protection Monacoers 2024-01-22 | Eric Russell shows how to add current protection to the front run bay of a Monaco coach with a Kongsberg Chassis Multiplex system.For more details on this repair, visit http://monacoers.org
Micro-Air Easy-Touch RV357 Thermostat Installation Monacoers 2023-07-11 | Instructional video by Monacoers memberTed Zimmer on installation of a Micro-Air thermostat in a 2006 Monaco Camelot. This replaces a Duo-Therm 5-button Comfort ControlTools needed:- Phillips screwdriver- Pliers- DrillInstructions downloaded from: micro-air.com/support-documents/EasyTouchRV/EasyTouchRV_357_Manual_1.7.pdfFor more info or to join Bill D's Monacoers: monacoers.org
Shoreline Power Cord Reel Gear Replacement Monacoers 2023-07-04 | Instructional video by Monacoers memberTed Zimmer on replacement of the broken drive gear for a Shoreline Power Cord Reel in 2006 Monaco Camelot. The process is very similar for a Shoreline hose reel.Supplies:- Replacement gears can be ordered from John Delmatoff: Phone: (951) 315-9135 or email JonDel1234@yahoo.com. He is a fellow owner of the Monaco brand. Priced under $80 and comes with everything needed (rivets and all) to replace the gear. Gear for the shoreline waterline reel too, that is todays project.- white lithium greaseTools needed:- Drill (to remove existing rivets- Rivet gun- flat blade screwdriver- phillips screwdriver- 3/8" socket or wrench to remove reel- wire cutter or knife to remove zip tiesFor more info or to join Bill D's Monacoers: monacoers.org
Carefree SOKIII Slide Topper Removal Monacoers 2023-07-04 | Removal of a Carefree SOKIII Slide Topper on a 2006 Monaco Diplomat.For more info or to join Bill D's Monacoers: monacoers.org
VIP Smart Wheel Clock Spring Replacement Monacoers 2023-07-04 | Instructional video by Monacoers memberTed Zimmer on replacement of the clock spring on a 2006 Monaco Camelot. Tools needed:- 5mm Allen wrench- Steering wheel nut socket & ratchet- Flat end steering wheel puller- Torque wrench (ft-lb)- T20 Torx head driver- Side cutters (pr)Instructions downloaded from: jtekt-cs-na.com/departments/service-partsFor more info or to join Bill D's Monacoers: monacoers.org
Monaco Lower Belt Line Repair (May 2023) Monacoers 2023-07-04 | DIY Repair of the lower belt line on a 2006 Monaco Diplomat. Please note we are not professionals and this video is intended to provide advice for other DIY'ers. For more info or to join Bill D's Monacoers: monacoers.orgList of supplies:Supplies - Stainless Steel rivets - We used 18-8 Stainless Steel Blind Rivets, Domed Head, 3/16" Diameter, for 0.751"-0.875" Material Thickness. (McMaster-Carr or Albany Albany (Approximately 100 rivets / beltline)- 13/64 drill bits (At least 1/beltline) WITH a stop collar set at 1"- ProFlex clear RV caulk (Approximately 1 tube / beltline)- Caulk removal tools * Plastic razor blades * 3-in-1 caulk removal tool * small nylon bristle bush * DeSolveIt Contractor's caulk removal or Boesheild T-9- 3" painter's tape- Denatured alcohol (for cleaning before caulk application)- nitrile gloves (for caulk application)- mineral spirits (for smoothing Proflex and cleanup))- Patience... LOTS and LOTS of patienceTools- Drill- Air rivet gun & compressor OR Heavy Duty (two handled) pop rivet gun (single-lever handheld rivet guns struggle to handle stainless steel pop rivets)- caulk gun- utility knife (& extra blades)
Monaco Upper Belt Line Repair (May 2023) Monacoers 2023-07-04 | DIY Repair of the upper belt line on a 2006 Monaco Diplomat. Please note we are not professionals and this video is intended to provide advice for other DIY'ers. List of supplies:For more info or to join Bill D's Monacoers: monacoers.orgSupplies - Stainless Steel rivets - We used 18-8 Stainless Steel Blind Rivets, Domed Head, 3/16" Diameter, for 0.751"-0.875" Material Thickness. (McMaster-Carr or Albany Albany (Approximately 100 rivets / beltline)- 13/64 drill bits (At least 1/beltline) WITH a stop collar set at 1"- ProFlex clear RV caulk (Approximately 1 tube / beltline)- Caulk removal tools * Plastic razor blades * 3-in-1 caulk removal tool * small nylon bristle bush * DeSolveIt Contractor's caulk removal or Boesheild T-9- 3" painter's tape- Denatured alcohol (for cleaning before caulk application)- nitrile gloves (for caulk application)- mineral spirits (for smoothing Proflex and cleanup))- Patience... LOTS and LOTS of patienceTools- Drill- Air rivet gun & compressor OR Heavy Duty (two handled) pop rivet gun (single-lever handheld rivet guns struggle to handle stainless steel pop rivets)- caulk gun- scaffolding (strongly preferred) or ladder (?)- utility knife (& extra blades)
