Singleton Sundial and the Matilda Tank, Motorcycle Adventure RotorRides 2026-09-20 | Singleton Sundial and the Matilda Tank, Motorcycle Adventure
[FPV Fly] Introducing the 1-2s WFD 2inch FPV Drone RotorRides 2025-09-07 | -This flight was done with the Walksnail 1s VTX--The 2" 1-2s Whoopdfarkndo frame is available at cncdrones.com/wfd-1s--2s.html-All prints available atmakerworld.com/en/@FPVFLY/upload
[FPV Fly] Hell Cat 5 Maiden Flight RotorRides 2025-05-08 | I put the arms from the up and coming Skull Cat on to my Hell Fly and it produced the most amazing frame.. 8-9 mmin flight on 1400mah 6s.Frames available at cncdrones.com
[FPV Fly] Visiting The Hollow with the 4 inch Hell Fly RotorRides 2025-04-16 | I take the 4" Hell Fly down to the Hollow for some ripping.Hell Fly available at cncdrones.com/hell-fly-4.htmlall prints available at makerworld.com/en/@FPVFLY
[FPV Fly] Introducing the 5 Dead Fly (maiden flight) RotorRides 2025-03-08 | I introduce my new frame to be released on CNCDrones.com, the 5" Dead Fly. I talk some crap about frame then I take the Dead Fly for its maiden flight in very strong winds....On a full rip, 5mins 30secs ish flight time using 1400mah R-Line 6s.cncdrones.com/dead-fly-5.html
[FPV Fly] The Recipe - Ripn, flipn and dipn with a dash of cinen. RotorRides 2025-03-04 | Today I head to fields with Chappy FPV to search for the eternal party in the sky. I do some flippy stuff with some spinny stuff and a couple of inverted do da's while going backward into a few fizzle fuzzle's.Location - The Field of DreamsWeapons of choice-5" 4k Skull Fly 6s4" 1080p Hell Fly 6s Both frames can be found for sale at CNCDRONES.com click on link..cncdrones.com/FPV-Fly_c_115.htmlThank you for watching. Hope you all enjoyed the party and look foward to partyin hard in the skies again very soon.PS. I have been slack with doing talk overs and showing my face on video due to life getting in the way, so from the very next video which i am editing currently I will get back to the norm and bring back some comedy...
[FPV Fly] Poppethead and the 5 4k 6s SKull Fly RotorRides 2025-02-22 | I take the 4K 5" 6s Skull Fly for a rip at the Poppethead with the 4" 6s Hell Fly however the Hell Fly will be a seperate video I'll release in a few days..Skull Fly available at CNCDrones.com, just search FPV Fly
4s 2inch WFD (Whoopdfarkndo) Test Rip RotorRides 2024-12-13 | I take my new designed frame the 2" WFD 4s for a test fly at 2 different locations..Motors-Rcinpower 6000kvaAio-Airbot FenixVTX- Walksnail 1sBat-4s 350mahOutcome--Very happy with power, stability and flight times. -A very fun drone that is extremly capable for any freestyle you wish to through at it.-Flight times on 350mah- Cruising 6mins - Ripping 4-5mins
[FPV Fly] Bikes, trees and a little dice with spice.. RotorRides 2024-08-04 | I chase some bikes, fly around like a idiot and throw a little dice with some spice..Weapons of choice..-4" 6s [FPV Fly] Hell Fly Walksnail digital -1.6" 4s Flywoo Firefly Walksnail digital
[FPV Fly] Raw Flight test cine style Hell 4 inch RotorRides 2024-05-23 | 4" Hell Fly frame by FPV Fly releasing for sales in Aug/Sept6s-850mahMotors-Mr Steele stout 1750 6sProps-Gemfan 4052VTX- Walksnail AvatarRX-Tracer1/4 to 1/2 throttle test..10mins flight time.........
[FPV Fly] 4inch Hell Fly Freestyle frame test RotorRides 2024-05-22 | Today I freestyle test my 4" freestyle frame called "Hell Fly"Motor 2307 stout 6ssparky square shit-Speedybeespark box-850 mah 6sProtocol-TBS TracerAnd yes I spelt subscribe wrong.. Typos happen, ka sa ra sa ra.. ;)
[FPV Fly] Testing my new 4inch hot rod frame the Hell Fly. (Maiden flight) RotorRides 2024-05-16 | I designed a new 4" fresstyle frame called "Hell Fly"This frame is a hot rod design.The Hell Fly and the Skull Fly are genuine Skull and Cross bones designThis frame whole reason for existance is to run big motors on a small frame.All specs will be given upon release in August.-Until then you can get my 5" Skull Fly freestyle frame from CNCMadness, it's amazing. Link below..cncdrones.com/skull-fly.htmlMotors-2307 ethix stoutSparky spuare shit- SpeedybeeVTX- Walksnail AvatrRX-TracerBattery-800mahFlight time-5mins on 1/2 to 3/4 throttle flight.I could of flown for another 1 to 2 min or more if I pushed the battery.PS. Cornering was greatDives felt greatRolls felt greatBasicly, my testing was very positive and I found no issues what so ever other then I was taking it to easy... :)
[FPV Fly] Maiden flight WITH 5 Skull Fly 6s with Walksnail 720p RotorRides 2024-03-23 | I take my 5" FPV Drone frame called a Skull Fly 6s with Walksnail for it's maiden flight and test VTX @25mw with 720p 60fs.
[FPV Fly] Raking the leaves with a 6s Geprec Cinebot 3.5 drone RotorRides 2024-03-03 | I take the Geprec cinebot 3.5" fpv drone for a rip around some tight spaces and rake up some leaves using my drone, well tried to, not really... lol
[FPV Fly] New spot, Poppet Head Park. 2 Pack attack!!! RotorRides 2024-01-28 | I find a new spot and test the area for signal dropouts then rip a little bit. Being a new spot I find I hold back a lot on the first visit due to unexpected problems that can occur. Next visit here will be the fun trip.. Cant wait, :). Weapon of choice - Impulse Reverb 6s
Fitness 101 with Helen and Chad. RotorRides 2024-01-24 | Helen and I have a little fun at the park at Nambucca Heads NSW Australia.
[FPV Fly] Flight test using nd16 filter on insta360 go2 RotorRides 2024-01-08 | I test a nd16 filter on insta360 go2 with standard settings. I am using a 6s Geprc cinebot frame with mambo aio, tbs pro hv32 vtx and foxeer antenna and cam. Due to lighter cam, today I flew for 7mins with a .850 6s lipo... Very happy witNext flight I will test with nd16 filter and custom settings.
[FPV Fly] Geprc 3 6s Mambot first flight of 2024 RotorRides 2024-01-03 | I dust off the cobwebs and take the Geprec 3" 6s cinebot out for 2 pack burn and use it for a little freestyle. Which is not really what its designed for as you will see in some pics you are looking at the ground to much which happens due to not having your action cam on a angled block as the cinebot has a suspension platform camera mount which is flat.... I also noticed a little jello in the footage at the start of the clip which may just be I did not have cam tight enough in strap. All these things will be fixed by next flight of this drone...... Or at least I'll try to fix them. ;)It's the thought that counts they say...
A short cinematic view of Nambucca Heads NSW Australia RotorRides 2023-12-23 | A short cinematic tease of Nambucca Heads NSW Australia
Little Rip at Nambucca Heads NSW RotorRides 2023-12-21 | I test for signal drops then smash into the sand due to vtx loss and then do a little shredding in a small area at a beautiful spot called Nambucca Heads NSW
Laguna Treasure Hunt RotorRides 2023-11-03 | Bonny, Helen and Myself go to Laguna and hide a Predator Snail for someone to find. Please be respectful of property and ensure not to damage anything when searching. If u find this, pls put a post in remarks or on Rotor Rides Facebook page so people know its gone.. Ty for watching.
[FPV Fly] Chapter 3 Liftoff and Dquad Pro Race Run RotorRides 2023-10-17 | My run on chapter 3 liftoff pro race.
[FPV Fly] A prize arrives from Liftoff flight sim and Dquad. RotorRides 2023-10-17 | I win a prize on Liftoff flight sim, Pro League Chapter 4
[FPV Fly] Chapter 4 Liftoff Fixation Tournament RotorRides 2023-10-04 | My current best run on Liftoff Multiplayer Chapter 4 Pro Race 2023
Free Camping at the First Fleet Memorial Gardens RotorRides 2023-09-19 | Bonny, Helen and myself go camping overnight at the First Fleet Memorial Gardens Wallabadah NSW and give Skrog a new home.
[FPV Fly] 1st attempt at filming a RC Heli and maiden flight of SAB Goblin Raw 420 RotorRides 2023-06-10 | My first attempt at filming a RC Heli by drone.Unfortunately my drone batteries were not charged fully and also I need to use a much higher cam angle so next attempt will be much better.Also it was my friends maiden flight with a freshly built SAB Goblin Raw 420.Which flew very well with nil issues.
Distinguished Gentlemens Ride Newcastle, Australia. 2023 RotorRides 2023-05-23 | Chad, Helen and Bonny do the Distinguished Gentlemen's Ride at Newcastle NSW Australia 2023.
[FPV Fly]Review. Rising Sun FPVs 5inch 6s FS Revenant FPV Drone RotorRides 2023-04-07 | The Guts of it-Frame- 5" Revenant. https://risingsunfpv.com.au/products/revenant-fs-frame-5-inchMotors- 6s ethix stoutVtx- TBS Prohv32Cam- Foxeer T-RexAction Cam- GoPro Session 5Boards- Speedybee Battery- 1200mah 6s LipoProtocol- TBS Tracer- This amazing machine is tough, sexy, and very builder friendly with lots of room. The design is rigid and tough and the frame itself goes together very easy without issue.-If u enjoy laughing along with me and gaining a little info on the way.. Then don't forget to subscribe for many more funny adventures...Coming up- overnighter camp on the Triumph - reviewing Impulse Apex 5" FPV Drone - reviewing 7" FS Revenant FPV Drone - reviewing c25 MKII Diatone Taycan FPV Drone - reviewing Yamaha MT09
[FPV Fly] GEPRC Cinebot30, 3, 6s, cinematic drone review. RotorRides 2023-03-16 | I review the GEPRC Cinebot30, cinematic FPV drone.The Guts Of It-Frame-GEPRC Cinebot30 3"Motors-Rising Sun FPV 2800kv 6sVTX-TBS Pro HV32Antenna-FoxeerAll In One-MambaCam-Foxeer T-RexProtocol-TBS TracerAction cam-Gopro session 5-Next review will be the 5" FS Revenant, designed and sold by Rising Sun FPV..
[FPV Fly] 7 6s FS Revenant FPV Drone RotorRides 2023-02-01 | 7" Revenant from Rising Sun FPVReview coming soon......
[FPV Fly] Rising Sun FPVs 5 Revenant FPV Drone Unboxing RotorRides 2023-01-26 | I receive the beastly demon spawn from Rising Sun FPV known as the 5" FS Revenant.Frame from Rising Sun FPV-https://risingsunfpv.com.au/products/revenant-fs-frame-5-inch3d Printed pieces with kit- Front section, the horn and rear antenna mount.The other pieces you will have to do a separate order, ie motor/frame guards and cam mount. This is so you can mix and match your favourite colours to help make that Revenant comfortable and at home in it's new surrounding's with it's new master.
5 FS Revenant 6s FPV Drone RotorRides 2023-01-26 | 5" FS Revenant frame from Rising Sun FPV-https://risingsunfpv.com.au/?gclid=Cj0KCQiAw8OeBhCeARIsAGxWtUw8mpQPxV96ZKLtkdMSEazPp8bsrenWxksmYjTT1eQgqph1qM29JEIaAt-nEALw_wcBEthix 6s Stout motorsTBS Prohv VTXFoxeer T-Rex camSpeedybee stack
[FPV Fly] How to install a drone race wire and why to use them.. RotorRides 2022-12-13 | -This is my first instructional video, next one I will have a second cam angle showing top down view of drone.-A instructional video for the new pilot on how to install a drone race wire and why..Subscribe and laugh along.Thanks for watching
[FPV Fly] 6s 3.5 F35 Diatone with Stout motors. Review RotorRides 2022-11-28 | The Guts Of It-Frame-Diatone Roma F35Cam-Foxeer T-RexSpeedybee stackMotors-Mr Steele 6s StoutAntenna-Foxeer stumpyVTX-TBS Unify Pro32 HV Receiver-TBS TracerBattery-.800mahMy next build will be the from the depths of Hell in the form a freestyle frame Revenant from the almighty and one and only, RISING SUN FPV..Get your preorders in now from the link to RISING SUN FPV. Don't miss out.https://risingsunfpv.com.au/?gclid=Cj0KCQiAsoycBhC6ARIsAPPbeLto_SSmQbZgv462BNOO1slvpYh7SY3UfmSZX7DPvZdMDrAUPzYtv_MaAub_EALw_wcB
1s 40mm Flywoo Nano Baby Firefly FPV Drone. RotorRides 2022-11-22 | The drone you can take anywhere..
[FPV Fly] Flywoo 1s 40mm Nano Baby Firefly Review RotorRides 2022-11-22 | I review the 1s Flywoo 40mm Nano Baby FireflyThe drone u can take anywhere in anything....
5” 6s Revenant T-motor weapon.. RotorRides 2022-11-18 | Revenant frame from -Rising Sun FPVhttps://risingsunfpv.com.au/?gclid=Cj0KCQiA1NebBhDDARIsAANiDD1TdD2F7KlS_LzSRvuTbp95KiqwKkHqpS1eJsVPO0FcBOvdM5R2n9kaAoihEALw_wcBtmotor pro motorstmotor racing wiretmotor propstmotor f7 flight controllertmotor 4 innto 1 escfoxeer t-rex camfoxeer antennatbs 69 tracer
[FPV Fly] 4s 80mm/1.6 Flywoo Firefly with rcINpower motor upgrade review.. RotorRides 2022-11-11 | I review a Flywoo Firefly 80 mm, 1.6inch 4s FPV Drone in 42km winds with upgraded motors from 5500kv to 6000kv.Its nice....
[FPV Fly]5 6s Revenant Black FPV Drone, Rising Sun FPV 1900kv motors with Rush FPV F7 stack review RotorRides 2022-11-06 | I review a 6s Revenant FPV Race Drone that I recently built.The guts of it..5" Frame from- Rising Sun FPV.https://risingsunfpv.com.auTBS Unify Pro HV VTX Rising Sun 1900kv Motorshttps://risingsunfpv.com.auRush FPV 65 amp 4 into 1 ESCRush FPV F7 Flight ControllerFoxeer T-Rex micro camFoxeer Antenna5045 Props1200mah 6s Battery
5” Revenant 6s Drone RotorRides 2022-11-05 | 5" Revenant 6s frame from Rising Sun FPVRising Sun MotorsRush FPV stackFoxeer T-Rex Camera
The Next Build. Diatone f35. RotorRides 2022-11-03 | Frame-Diatone f35Motors- Mr Steele, StoutStack- Speedy BeeCamera- Foxeer T-RexAntenna- Foxeer Stubby6S Build.
Grey Gums International Cafe with FREE Camping.. RotorRides 2022-11-03 | Chad and Helen go motorcycle camping with Bonny at the iconic Grey Gum International Café. They see some wildlife and show the sites of a amazing destination owned by two beautiful people named Will and Kim Grey.The hospitality at this place is incredible with every meal cooked with love and always served with a smile. They truly care about others and there safety by providing a break on a very exciting road for a rest, meal and a toilet break while being surrounded by the pure serenity of nature and the rumble of motorcycles. Grey Gums is a place that all need to visit, say hello to Will and Kim and try some of the amazing food they have to offer, I'll guarantee you will be back for more.....
[FPV Fly] Gaps at Helens with 1s Baby Firefly Whoop... RotorRides 2022-10-23 | I test out a new place to fly with the baby Firefly Whoop 1s.
[FPV Fly]5 6s Revenant Red, T-motor F7 stack and pro V motor Review. RotorRides 2022-10-16 | 5" Revenant with 5mm thick arms frame from-Rising Sun FPVhttps://risingsunfpv.com.auThe guts of it-T-motor F7 flight controller55amp Pro 4 into 1 escT-motor Pro V motorsFoxeer T-Rex micro camFoxeer antennaTBS69 vtx on Tracer protocolI review a 5" Revenant frame from Rising Sun FPV and T-motor F7 stack with T-motor pro V motors..
