Building the Indoor Workshop Part 1 The Carving Table Mark Hanson 2026-09-20 | Building the Indoor Workshop Part 1 The Carving Table
Deep in Thought Wood Spirit #shorts Mark Hanson 2023-02-01 | Carved into a piece of driftwood.Music:Riptide Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 Licensehttp://creativecommons.org/licenses/by/3.0
Mountain Man Wood Carving Mark Hanson 2023-01-03 | I carved this into a piece of driftwood.Music:Artist: Aaron LiebermanTitle: Move Up to the MountainsFree Download: bit.ly/2BmPGLZ
Maple Drift Wood Spirit Mark Hanson 2022-12-21 | I carved this wood spirit out of a chunk of drift wood which happened to be soft maple (silver maple).
Driftwood Scorpion Sculpture Mark Hanson 2022-12-18 | I had some drift wood lying around that wasn't going to be good for carving. One piece inspired this build.
Improving Dust Collection on my Laguna F2 Table Saw Mark Hanson 2022-11-08 | After a near disaster with a smoldering ember and too much saw dust I upgraded my dust collection on my Laguna F2 saw.
Hiking Part of the Ice Age Trail Oct 2022 Mark Hanson 2022-10-17 | It was cold but fun to be out in the woods for three days/two nights with two of my brothers backpack camping.
Milling a Large Maple Burl Mark Hanson 2022-08-11 | I've had this burl in my garage for four years and I needed to mill it up so I could use it for some upcoming projects.
American Crow Mark Hanson 2022-07-27 | I wanted to add something to my last carving and this what I came up with.
Teardrop Camper Fantastic Fan Modification Mark Hanson 2022-06-14 | The Fantastic Fan has three settings, all of which are too fast for a small teardrop camper. So, I made a modification on it to have more choices in fan speed and to reverse the motor.Link to electronics used in this video: amazon.com/dp/B071H2YQG5?psc=1&ref=ppx_yo2ov_dt_b_product_details
Cedar Exterior Door Mark Hanson 2022-05-01 | I have needed to replace this door for a long time. I used some eastern red cedar on it. I found this resource to be extremely helpful:baileylineroad.com/how-to-build-a-door
Between Cuts: Exploring Driftwood for Carving in the Pacific Northwest. Mark Hanson 2022-03-15 | I think I salivated quite a bit while exploring a beach in Washington state. Lots of driftwood that would be great for wood carving.
One Branch, Three Wood Spirits Mark Hanson 2022-02-26 | I had this box elder lying around for a few years. I decided to carve some wood spirits into it.
How to Make Knock Down Display Shelves Mark Hanson 2022-01-15 | I needed to make some display shelves for an upcoming craft fair.
Robert Plant Inspired Wood Spirit #shorts Mark Hanson 2022-01-08 | I tried to carve Robert Plant's face as a wood spirit. It looks pretty good, but isn't a spitting image.
How to Build a Down Draft Table Mark Hanson 2021-12-08 | I built this down draft table to limit the amount of dust kicked up when power carving. It is an easy and quick project that can be done in an afternoon.
Carving an Ugly Woodspirit #shorts Mark Hanson 2021-11-28 | I'm carving an ugly woodspirit into this piece of beach driftwood.
Wise Woman Driftwood Carving #shorts Mark Hanson 2021-11-20 | This beautiful piece of box elder driftwood worked wonderfully well for this carving.
Cherry Desk with Resin Pour Mark Hanson 2021-11-14 | I built this desk for my son. It is a fairly simple and modern looking desk. I used a resin pour to be able to salvage some nice looking grain.
Bois Brule Camping and Kayaking Mark Hanson 2021-09-21 | A little break from carving and cutting. This was a beautiful and refreshing trip!
Between Cuts 8/29/21 - Roughing out Neanderthal Carving, Drying Wood for a Desk Mark Hanson 2021-08-29 | I glued up the wood for the neanderthal carving and started rouging it out. I show some of the steps along the way. I also selected the wood for a desk I am building and started drying it.
Between Cuts 1 Mark Hanson 2021-08-13 | I showcase some of my upcoming projects as well as talk about how I have to work differently to produce projects like I used to.Website: woodspirit.net
Cedar Driftwood Wood Spirit Mark Hanson 2021-07-11 | I carved this from a piece of cedar driftwood in one day.Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
How to Build Camp Chairs Mark Hanson 2021-06-23 | The plans/books that I used:popularwoodworking.com/?s=dock+chairamazon.com/Outdoor-Furniture-better-yourself-Woodworking-Projects/dp/0878577882 Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Band Saw Log Milling Jig Mark Hanson 2021-05-01 | I built this log milling jig mostly from scraps in my shop. I did buy the miter slot runner: amazon.com/dp/B07JYD4H52?psc=1&ref=ppx_yo2_dt_b_product_details
Building a Folding Table from a Folding Table Mark Hanson 2021-04-12 | I used an old and ugly folding table as the basis for making this wood top folding table. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Carvers Arm Mark Hanson 2021-03-21 | I built this carver's arm from plans I found online at Woodcarving Illustrated. I modified them a bit.Here's a link to the original article and plans: http://woodcarvingillustrated.com/blog/2010/06/01/building-a-carving-arm Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Build a Gouge Caddy from Pallet Wood Mark Hanson 2021-03-14 | I used pallet wood to create this gouge caddy. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Dragon Push Block Mark Hanson 2021-02-21 | This is what happens when a woodcarver needs to build something practical like a push-block and doesn't have another project at the moment. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
River Otter and Wolf Carving Mark Hanson 2021-01-25 | This was quite a lesson on being flexible with plans. I had a couple of things alter my original plans. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Carving a Unique Wood Spirit Mark Hanson 2021-01-17 | I carved this wood spirit out of a piece of choke cherry.Music:Solace by Scott Buckley soundcloud.com/scottbuckleyCreative Commons — Attribution 3.0 Unported — CC BY 3.0Free Download / Stream: bit.ly/s-b-solaceMusic promoted by Audio Library youtu.be/x8h50E6ekR0 Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Woodcarving: Hand and Ball Sculpture Mark Hanson 2021-01-02 | I carved a hand holding a sphere out of a chunk of basswood. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Skoolie Relief Carving Mark Hanson 2020-12-21 | This was a project for my brother-in-law and sister-in-law. They are in the process of building a Skoolie (school bus converted into a camper), so I decided to carve this to adorn the bus and travel with them on their adventures.River Channel: youtube.com/channel/UC0t7iyDTrLIvNEf0-yEGSow Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Sharpening a Badly Worn V-Gouge Mark Hanson 2020-11-28 | Here's how I sharpened a V-gouge with a big chip in it.Link to Joe's video on sharpening. youtube.com/watch?v=RIfB41gYi30 Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
My New Band Saw Mark Hanson 2020-11-14 | I bought a new Grizzly ReSaw Extreme 14" Band Saw Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Teardrop Camper Complete Build Mark Hanson 2020-11-02 | I built this teardrop camper in the summer of 2020 after someone else started it.Music in this Video (all copyright free):Lock and Key by Silent Partner Creative Commons — Attribution 3.0 Unported— CC BY 3.0 https://creativecommons.org/licenses/... Music provided by FreeMusic109 youtube.com/FreeMusic109🎵 Track Info: Title: Maroon Clock Genre and Mood: Rock+RB+Funky🎵 Track Info: Title : Pedal to the Metal Artist : Chris Haugen Genre : Rock Mood : FunkyOne Last Time - COPYRIGHT FREE MUSIC | FREE BACKGROUND MUSIC | NO COPYRIGHT MUSIC | ROYALTY FREE MUSIC [NCS]Bucket List by Doug Maxwell, Jimmy Fontanez Creative Commons Attribution 4.0 License Music promoted by CopyrightFree.org🎵 Track Info: Title : Move Up to the Mountains Artist : Aaron Lieberman Genre : Jazz & Blues Mood : Funky Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper: Top 5 and Bottom 5 Things We Like (and dont) Mark Hanson 2020-10-30 | We talk about our top 5 and bottom 5 things related to the camper. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
1st Trip in the Tear Drop Camper Mark Hanson 2020-10-27 | It was a little cold. Some might say a lot cold. But, it was beautiful and well worth it. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper Build 10: Its Finished! Mark Hanson 2020-10-26 | I have finished the camper! Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper Build 9: The Galley Mark Hanson 2020-10-04 | I've built the Galley. It will be a work in progress until I use it a few times to determine if I need more dividers and such, but it looks great so far.
Tear Drop Camper Build 8: Installing the Hurricane Hinge Mark Hanson 2020-09-26 | How I installed a hurricane hinge on my camper. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper Build 7: Installing Windows, Vent, and Doors Mark Hanson 2020-09-22 | The windows and vent are installed and I am just waiting for some butyl tape to arrive to finish installing the doors. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper Build 6: Attaching the Camper to the Trailer and Trim to the Camper Mark Hanson 2020-09-13 | Pretty much says it all in the title. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Tear Drop Camper Build 5: Painting Mark Hanson 2020-09-01 | I paint the camper with Total Boat Topside Wet Edge Paint. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
Making Floating Display Shelves Mark Hanson 2020-08-19 | I milled up this maple several years ago - it came from my neighbor's yard. Since I wanted to display some of my carvings in my room I thought I'd make use of it for this project.
Tear Drop Camper Build 4: Applying the Fiberglass and Epoxy Mark Hanson 2020-08-09 | It's getting closer....!
Tear Drop Camper Build 3: Getting it Ready for Fiberglass Mark Hanson 2020-07-30 | I finish insulating it, putting on the 1/4" (6 mm) plywood on the outside of the camper, and I use thickened epoxy to fill in the larger gaps. Link to tools I use: woodspirit.net/products-i-useMy Website: woodspirit.net
