Its a fun electronic toy car that hides a special power. It has power-ups! I utilize a color sensor and a magnetic switch to trigger fun tricks such as speed ups, slow downs and spin outs. You might have guessed it, yes, its taking a lot of inspiration from Mario Kart!
I hope you enjoyed the story behind its creation, requirements, and assembly!
I love creating electronics projects, especially custom PCBs in my home lab. I have a ton of fun projects planned for the next videos. Subscribe!
Its a fun electronic toy car that hides a special power. It has power-ups! I utilize a color sensor and a magnetic switch to trigger fun tricks such as speed ups, slow downs and spin outs. You might have guessed it, yes, its taking a lot of inspiration from Mario Kart!
I hope you enjoyed the story behind its creation, requirements, and assembly!
I love creating electronics projects, especially custom PCBs in my home lab. I have a ton of fun projects planned for the next videos. Subscribe!Do This Before You Solder AnythingStuckAtPrototype2025-08-31 | 👋Want to build your own Micro Racer and support the channel? stuckatprototype.com/pages/micro-racer-preorder
There is one small step thats not shown in the video, at the very end, you can repeat the cleaning step using isopropyl alcohol. Clean up any flux residue and your soldering joint will be even nicer. Thanks Ernie for pointing this out!
I hope this video helps out someone! Let me know your thoughts in the comments below.
Let me know what you think about the video. What do you think of this format? What else would you like to see?
Timestamps : 0:00 Introduction 01:02 The type of projects I make 01:53 Stereo Microscope 03:53 Soldering Iron 05:32 Soldering Addons 07:32 Hot Air Station 08:32 SMT Soldering Addons 09:13 SMT Reflow Oven 10:16 SMT Pick and Place 10:53 Injection Molding Machine 12:28 FDM Printers 13:42 SLA Printers 15:15 CNC 15:42 Plotter 16:36 Oscilloscope 18:49 Logic Analyzer 19:42 Thermal Camera 20:58 PC 22:29 Total
Thanks for watching and thanks for your support!SLA vs FDM 3D printing #3dprinting #shortsStuckAtPrototype2025-07-19 | ...I made injection molded tires #shorts #3dprintingStuckAtPrototype2025-07-07 | I ended up making injection-molded tires for these racers. I could not come up with a reliable way to make good-quality tires/wheels that could be produced in larger quantities. I am now offering these as a kit which is insanely exciting. You can check it out here stuckatprototype.com/pages/micro-racer-kit-landing?ref=shortinjectionmolded
A big thank you to all of you for your support. It truly means a lot to me. My goal is to bring super cool projects to you via YouTube and via build kits. Thanks to your support I am able to dedicate more time to making these projects and videos. I have some incredible plans for this year, and I cannot wait to bring these videos and projects to you. My goal is to build bigger and better projects over time so the content and projects become even more spectacular. The best way you can support this journey is by buying a kit and subscribing :) Thanks so much, it really does mean the world to me.
Engineering is a superpower. I hope to see you in the community, and I will see you in the next one!I’m just having fun taking pictures #shortsStuckAtPrototype2025-06-21 | ...Why I have a Pick and Place Machine at HomeStuckAtPrototype2025-03-23 | 👋Want to build a fun project and learn engineering with me? Check this out stuckatprototype.com/pages/micro-racer-kit-landing?ref=pnp_vid
In this exclusive deep dive, I'm super excited to take you behind the scenes of my pick and place process. You'll get insights and details I've never shared before!
Over the last few months, I went on a journey to design the perfect PCB-based drink coaster. The project took me on a few engineering rollercoaster spins, but the effect speaks for itself. I hope you enjoyed the video and if you did, consider subscribing.
Thanks for watching and I will see you in the next one.
P.S. I have something big in the works and you will be the first to know if you are on my mailing list. See you there landing.stuckatprototype.com/exclusiveThis PCB business card got me a job, so I open sourced itStuckAtPrototype2024-12-17 | Thanks to JLCPCB for sponsoring todays video. Get JLCPCB 6 layer PCBs for just $2! Register to get $60 Coupons: jlcpcb.com/?from=stuckatprototype CNC machining starts at $1 : jlccnc.com/?from=sap
Do you remember Flappy Bird? Well, this is a PCB business card that you can play a version of flappy bird on!
It was incredible being able to go full circle and visit Hong Kong again. For context, I was in Asia on a business trip, Hong Kong was a short hop away -- but it is halfway around the world from where I live! Incredible memories from this trip and from 2019.
It was super fun to remake this project. I hope I inspired at least one of you out there to have fun and make projects of your own!
I know the code will show this, but it was written mostly in airports, airplanes, and hotels.
Thanks so much for watching. See you in the next one. Stay fun.Did you know this about e-ink? #electronics #shortsStuckAtPrototype2024-10-16 | I like working with e-ink displays for a lot of reasons, especially when dealing with battery-powered devices. These days they are fast and persist without power. They look sharp too!I love making PCBs #electronics #shortsStuckAtPrototype2024-10-03 | I love making circuit boards and fun projects. Here is one of many. What do you think? Full video coming soon!How I assemble #electronics in my home lab #shortsStuckAtPrototype2024-09-30 | I have a home lab and assemble my own PCBs. Here is the process from start to finish in 39 seconds. And, call me crazy, but I have a pick and place at home.keyboard controlled car #electronics #shortsStuckAtPrototype2024-09-26 | If I only had a remote for this thing. maybe then it would be easy to control... so I built a remote for my little racer robot. Now time to tune it and make it controllable. One can dream that one day it will be a racing machine.Finding shorts has never been easier #electronics #shortsStuckAtPrototype2024-09-23 | I love this thing for debugging hardware when things heat up. It's an absolute savior. It pinpoints the exact problem and saves me hours of tedious debugging. Plus.. I avoid burned fingers which is a huge plus! Whats your favorite tool for debugging embedded systems in your home lab?I have a home lab and this tool is my favorite #electronics #shorts #smtStuckAtPrototype2024-09-21 | You might think it's overkill, but trust me.. this thing has saved me hours and hours of sweat and tears. oh... and back pain. and eyesight. and I think you see where this is going. While I do wish I had a vision version of the pick and place, I love this thing and it helps me speed through projects.Clean off that extra like a pro #3dprinting #electronics #shortsStuckAtPrototype2024-09-10 | A quick efficient method to clean off that support or bed filament. I used to spend hours trying to clean off every bit until one day I noticed how sharp, yet at the same time dull is a PCB edge. Works perfectly and saves me a ton of time.Its got a neural network for detecting colors #shorts #electronics #pcbStuckAtPrototype2024-09-07 | Color detection is triggered by a magnetic sensor, then the color sensor output is processed by a neural network. The result is then used to take actions such as spin out, speed up, etc. This is a part of a bigger project. Full video dropping soon