How to Set Up and Use The Magnasonic FS81 8mm / Super 8 Film Scanner Magnasonic 2020-03-04 | Create memories that will last forever with The Magnasonic FS81, an 8mm and Super 8 film scanner. In this video, we will show you how to scan your film and transfer the video files from an SD card to a computer. CHAPTERS 00:00 - Intro00:17 - What's included in the box 00:43 - Setting up the FS81 01:20 - Installing your film reel 02:50 - Preparing the scan settings 03:24 - Scanning the film 04:25 - Watching your film 04:45 - Accessing video files on your computer 05:33 - Rewinding your film To purchase The Magnasonic FS81 or access online resources and support use the following link: magnasonic.com/all-in-one-super-8-and-8-mm-film-scanner FOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbw Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tf Twitter: twitter.com/magnasonic1. Remove the film scanner from the box along with all accessories.2. Insert an SD card up to 32GB into the back of the scanner. A class 6 or above SD card is required to scan and save video. FS81 does not scan directly to a computer.3. Connect the power adapter to the back of the scanner and plug it into the wall.4. Press the power button (SHOW ICON) on the scanner.a. *The motor will move when turned on.5. Install your film reel onto the left reel shaft with the holes on the film closest to the scannera. *if using Super 8 film, put the red reel adapter on the shaft first.6. Install the included 7” film reel onto the right reel shaft.a. *if using a different reel put the grey reel adapter on the shaft first.7. Feed the film along the dotted line from left to right.8. Wrap the film around the empty reel 2 to 3 times, there is a slot to hold the film in place. Hold the film in place for the first rotation.9. Open the film try by sliding the open tab to the left.10. Insert the film with the holes at the back, it should be held in place by the two white tabs on the film tray.11. Close the film tray door to lock the film in place.12. Use the toggle switch on the front of the scanner to choose between 8mm and Super 8.13. Using the main menu, adjust the Exposure (Brightness) and Sharpness.14. If the film appears to be cropped or misaligned, use the Frame ADJ option in the main menu to adjust the horizonal and vertical alignment or zoom.15. Press OK to select the size of the reel, use the left and right arrows to change sizes and press OK again to confirm your selection.16. Scanning will begin, a red dot in the upper left corners of the screen will confirm the scanner is recording.a. Monitor the first 1-2 minutes of recording to ensure the film is feeding correctly.17. To Stop Scanning at any time, press the OK button. Pressing record again after this will save to a new file.18. Watching your film: your film can be watched on the scanner using the playback option, or by connecting the USB cable to your computer and opening the file saved on the SD card.a. If the is audio in the film, it is not recorded by the FS81.19. To rewind your film back to the original reel, switch the reels between the left and right positions and feel the film along the path shown here.
How to Scan & Digitize 35mm, 126, and 110 Film and Slides to a Computer with the FS50 Film Scanner Magnasonic 2021-06-29 | The Magnasonic FS50 Film Scanner will scan and edit your 35mm, 126, 110, and Super 8 film and slides, to digital files that can then be archived or shared on your computer. In this video, we take you through the whole process, from setting up the scanner, to transferring them to your computer.*5V 1A Power Adapter Not Included*FS50 All-in-One 22MP Film Scanner• magnasonic.com/all-in-one-22mp-film-scannerChapters00:00 Intro00:07 Connecting the scanner to power00:25 Turning it on and selecting the film type00:58 What types of film and slides can it scan?01:07 Loading the film into the adapter01:28 How to scan film01:54 Editing your scanned photo on the FS50 Film Scanner02:39 How to scan slides03:02 How to flip and mirror your photo03:50 Inserting a SD card for more storage04:07 Transferring your photos to a computerFollow us!Facebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonicBlog: blog.magnasonic.comTranscript:Today, we're going to show you how to set up and use the Magnasonic FS50 film scanner. To get started plug in the USB cable to the back of the film scanner.Then plug the other end into the power adapter, and plug it into power. Press the power button on the top of the scanner to turn it on. The next step is selecting your film typeUse the arrows on the top to select film type, and then press OK.From here, you can choose between color negative, slide film and black and white negative film. In this case, we're scanning a roll of 35mm color film, so we're going to select color negative 35mm. The FS50 can scan any of the film sizes that you see here.The FS50 comes with these film adapters. Select the one appropriate for your film, load the film, and then load the adapter into the side of the film scanner like so. A preview of the photo will show up on the LCD screen. To scan, press the scan button and then press OK.To scan the next photo, move the film strip through the scanner. It takes approximately three seconds to scan a photo. You can edit your photos directly on the FS50 with no computer required. To do so, when scanning a photo, press the OK button. This will bring you to a screen that has values for EV, R, G and B. They stand for exposure, red channel, green channel, and blue channelUse the arrows on the top of the scanner to change your exposure, and then press OK to move on to the red channel.After you have made your adjustments, the LCD screen will preview the photo with the adjustments made.The process for scanning slides is the same load up the tray with your slide, insert it into the film scanner, and then select Slide Film from the film type menu. To view your photos, go back to the main menu and select Gallery. Your photos will automatically play like a slideshow. To manually select your photos, press the OK button and then use the arrows to scroll through them.When scanning film, you have the option to either mirror or flip the image. To do this, use the Mirror and Flip buttons on the top of the scanner. These are also the arrow buttons.The FS50 comes with 128MB of internal storage. For more storage insert a SD card up to 32GB big into the back of the scanner. Your photos will now save to the sd card. To view photos on your computer, you can either take out the SD card and insert it into an SD card reader attached to your computer, or connect the scanner directly to the computer using the USB cable. Simply plug the USB cable into the USB port and select USB MSDC from the main menu. Your film scanner will then appear on your computer like it was an external hard drive. From here, you can copy and backup your photos.For more videos about this and other Magnasonic products visit us at magnasonic.com.
Magnasonic CR20 Alarm Clock Radio With USB Charging For Smartphones & Tablets Magnasonic 2021-02-24 | Wake up ready to take on your busy day with the Magnasonic Alarm Clock Radio. Enjoy the convenience of this easy-to-use alarm clock with many great features such as dual alarms, USB charging, FM radio, and time projection.Project the Time on Your Ceiling or Wall - Never worry about rolling over in the middle of the night to check the time again. Easily see the time on your wall or ceiling with the 180-degree swivel projection.Charge Your Device While You Sleep - Recharge your phone and yourself at the same time. Charge your USB device without the need to take up outlets or be hidden behind hard-to-reach furniture. Keep your smartphone, tablet, or e-reader powered at 100%.Wake Up to What You Want to Hear - Preset up to 10 of your preferred radio stations so you can wake up to your favorite music or morning radio show. You can also program separate alarms for you and your partner allowing you to set to your individual schedules with ease.Battery Backup - No power, no problem! Have peace of mind knowing that your alarm will still go off even in the event of a power outage thanks to the clock radio’s back-up battery feature.For more information, visit: magnasonic.com/alarm-clock-radio-with-usb-charging-cr20-blackFollow us!YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonic
Magnasonic Film & Slide Scanners Compared Magnasonic 2020-12-17 | At Magnasonic, we have a number of great ways to convert your old film, negatives, and slides, into a digital photo or video file. But which option is the best for you? That depends on what you're scanning, and how you're using it. Whether you're using the FS81 to turn an old 8mm movie reel into a shareable movie file, or using any of our photo scanners for backing up old 35mm, 126 or 110 film or slides, we have a film scanner that is a perfect fit for you. By the end of this video, you will know which one that is.0:00 Intro0:13 FS81 - Super 8/8MM Movie Film Scanner1:10 What FS50, FS51 and FS52 have in common1:29 FS511:41 FS501:59 FS522:16 FS602:55 FS713:17 Viewing photos on a TV3:41 Which one is right for me?Featured in this video:Magnasonic FS50 All-in-One 22MP Film Scanner» magnasonic.com/all-in-one-22mp-film-scannerMagnasonic FS51 All-in-One Film Scanner» magnasonic.com/all-in-one-23mp-film-scannerMagnasonic FS52 All-in-One Film & Slide Scanner» magnasonic.com/all-in-one-22mp-film-and-slide-scannerMagnasonic FS60 All-in-One 14MP Film & Photo Scanner» magnasonic.com/all-in-one-14mp-film-photo-scanner-fs60Magnasonic FS71 All-In-One 22MP Film Scanner with 5" Display & HDMI» magnasonic.com/5-inch-film-scanner-with-hdmiMagnasonic FS81 Super 8/8mm Film Scanner» magnasonic.com/all-in-one-super-8-and-8-mm-film-scannerFollow Magnasonic:» Facebook: facebook.com/Magnasonic» Twitter: twitter.com/magnasonic» Instagram: instagram.com/magnasonicsince1954» www.Magnasonic.comTRANSCRIPT:This is the lineup of film scanners from Magnasonic. At Magnasonic, we have a film scanner for everybody, and in this video, we will help you figure out which one is right for you.If you are looking for something to create video from Super 8 or 8mm reels, then the choice is easy. You will want the FS81. The FS81 scans 3, 5, and 7 inch reels of Super 8 and 8mm film, and then creates MP4 video files. It does not scan photo negatives or slides, and does not scan 16mm film. You can view the footage as it scans on the LCD screen, with a TV using the TV out, or by inserting the SD card into your computer. If you are looking to scan photos, then there are are a number of great choices. Let's start with the FS50, FS51, and FS52. These film scanners look the similair from the outside, but there are a few slight differences. All have colour LCD screens, produce 22 megapixel files, have slots for SD card. As well, they can all scan 35mm film, 126 film, 110 film, and 135 slides. Starting with the FS51, it scans 35mm, 110 and 126 negatives, as well as 35mm slides. The FS50 adds the ability to scan 110 and 126 slides, as well as Super 8 film. When scanning Super 8 film with the FS50, you will be able to scan photos from the film only. It will not create video files. For that, you want the FS81.The FS52 will scan everything that the FS50 can, as well as 8mm film. Like the FS50, it will scan photos of movie film only. For video files, you want the FS81.When we move up to the FS560, things start to look a little different. The FS60 has the ability to scan both film, slides, as well as printed photos, in 14mp resolution. By taking off the bottom and placing a photo in the tray, you can make digital copies of prints. You can even set it on albums and scan right from an album. The FS60 does not have built-in storage, but it does come with a SD card that can hold up to 900 images. The FS60 can scan 35mm, 126, and 110 film, 135 slides, and photos up to 4x6".When you open the FS71, you will notice the nice, big LCD screen. It's 5" big and can produce 22 megapixel images. It can scan 35mm, 126, and 110 film, 135, 126 and 110 slides, and still photos from Super 8 film. All of these scanners, except for the FS60, give you the ability to view photos on your television, using the TV out. The FS71 has an HDMI, while the rest have a 3.5mm output.What all of these scanners have in common is the ability to edit the brightness, and colour of the photos, right on the device itself. No computer necessary.So which one is right for you? If you are looking to create video files from Super 8 or 8mm film, the FS81 will create easily shareable and archivable MP4 files. If you want to scan photo prints, try FS60.If you prefer a large screen, try the FS71. It's 5" LCD screen will show your photos in great detail. If you prefer something a bit more compact, try the FS50, FS51 or FS52. For more about these film scanners, and more Magnasonic products, visit Magnasonic.com. Thank you for choosing Magnasonic.
How to Use the Magnasonic PP60 Pocket Pico Video Projector Magnasonic 2020-12-16 | In this video, we will show you how to setup and use the PP60 Pocket Pico Video Projector. We'll cover what's in the box, how to charge the projector, and how to set it up to any HDMI source. 0:00 Intro0:14 What's In The Box0:38 Getting Started (connecting to power)0:50 How Long to Charge & Battery Life1:14 Connecting via HDMI1:29 Apple and SlimPort devices1:43 How to Power On the Projector & Focus2:09 Volume, speakers, and headphones2:27 Ideal Conditions for Viewing2:39 OutroMagnasonic PP60 LED Pocket Pico Video Projector» magnasonic.com/led-pocket-pico-video-projectorFollow Magnasonic:» Facebook: facebook.com/Magnasonic» Twitter: twitter.com/magnasonic» Instagram: instagram.com/magnasonicsince1954» www.Magnasonic.comTRANSCRIPT:Today, we're going to set up the PP60 LED Pocket Pico Video Projector from Magnasonic. This projector will display video, up to 60", from any HDMI source.In the box, you will find:The ProjectorHDMI CableHDMI to Micro-HDMI adapterMicro USB cableTripodProtective bagAnd quick start guideTo get started, connect to the projector to power with the Micro USB cable. We recommend doing this with a USB power brick, but you can also use any USB port that gives power, like the one on a laptop.Charge the projector for about 3 to 5 hours, or until the LED goes from red to green. Then, you can unplug the projector, and enjoy approximately 2 hours of video and audio with battery power. When the battery is low, you will see a low battery message on the screen. The HDMI input is on the back of the projector. You can use this input to connect anything with an HDMI connection, such as a Blu Ray player, DVD player, laptops, gaming consoles, streaming sticks, or a camera. In this video, we're using a laptop. Other devices without an HDMI output, such as Apple phones or tablets, and SlimPort devices, will require adapters. For these devices and adapters, follow the manufacturer's instructions. You can power on the projector using the on/off switch on the side. You may also have to adjust the focus. To do so, move the focus wheel until the picture is in focus. To increase or decrease the size of the video, move the projector further away, or closer, to the projection surface. When you do this, you will have to readjust the focus.On the side of the projector are volume controls. The PP60 comes with a built-in speaker, but for more immersive sound, you can use the audio output on the back side to plug in headphones, or external speakers.For ideal video quality, we suggest using a light coloured wall, preferably smooth, and watching in a dark room. You could also use a projection screen.For more about the PP60, and other Magnasonic products, visit magnasonic.com
How to Set the Alarm on a Magnasonic EAAC470 or EAAC475 Alarm Clock Radio Magnasonic 2020-09-29 | The Magnasonic EAAC470 and EAAC475 USB Charing Alarm Clock Radios come with dual alarms. You can wake up to either the buzzer, AM, or FM radio, and sleep well knowing that the built-in battery backup will automatically activate if the power goes out. In this video, we will show you how to set an alarm.Magnasonic EAAC470 USB Charing Alarm Clock Radiomagnasonic.com/usb-charging-alarm-clock-radio-eaac470Magnasonic EAAC475 USB Charging Projection Alarm Clock Radiomagnasonic.com/usb-charging-alarm-clock-radio-white-ledFollow Us!YouTube: ttps://www.youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonicTRANSCRIPT:In this video, we will show you how to set an alarm on your Magnasonic EAAC470, or EAAC475, USB Charging alarm clock radios. To set an alarm, press and hold the Alarm 1 button until the time flashes.Then use the arrow buttons to select the hour. The PM icon will light up when you select an hour between noon and midnight.Press the Alarm 1 button.Use the arrow buttons again to select the minutes, and press the Alarm 1 button.The next screen is the alarm modes. You use this screen to select which days of the week the alarm will sound. Using the arrow buttons, select 1-5 for Monday to Friday1-7 for the whole week6-7 for Saturday and Sunday1 for Monday2 for Tuesday3 for Wednesday4 for Thursday5 for Friday6 for Saturday7 for SundayPress the alarm 1 button to confirm the selection. Now, the wake options will begin to flash. Use the arrow buttons to select AM, FM, or BELL. and press Alarm 1. If you select AM or FM, the radio volume will flash. use the arrows to select a volume, from 1-15, and press Alarm 1. When the alarm is activated, there will be a illuminated dot next to the Alarm 1 icon on the front of the clock.To set a second alarm, repeat these steps, but use the Alarm 2 button instead of Alarm 1.The alarm will sound for 30 minutes. To snooze the alarm for 9 minutes, press the Sleep / Snooze button. To turn off the alarm, press the power power on the front of the clock.To deactivate an alarm, press the Alarm 1 or Alarm 2 button, twice. Thank you for watching, and thank you for choosing Magnasonic.
How to Set an Alarm on the Magnasonic CR20 USB Charging Projection Alarm Clock Radio Magnasonic 2020-08-19 | In this video, we will show you how to set an alarm on the Magnasonic CR20 USB Projection Alarm Clock Radio.For more information on the CR20, visit magnasonic.com/alarm-clock-radio-with-usb-charging-cr20-blackFollow us!YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonicTRANSCRIPT:In this video, we're going to walk you through the process of setting an alarm on your Magnasonic CR20 Alarm Clock Radio. The CR20 Alarm Clock radio offers the option to set two different alarms.To set Alarm 1, press and hold the Alarm 1 button, on the back of the clock, until the alarm time starts to flash.To change the alarm time, press the Hour and Minute buttons on the back of the clock. The PM LED light will glow when the time is set for PM. Press the Alarm 1 button, to move on to the Alarm Type options. Use the arrow buttons to switch between Bell, and the current radio station. Volume is only adjustable when using the radio option.Press the Alarm 1 button to move on to Alarm mode. This setting lets you choose what days of the week you want your alarm to sound. 1-7 means your alarm will sound every day. 1-5 covers Monday to Friday. 6-7 is Saturday and Sunday. Press the arrow keys to change the option.Press the Alarm 1 button one more time to confirm your settings. The LED will light up next to the Alarm 1 bell, or music icon when the alarm is enabled. To set a second alarm, press and hold the Alarm 2 button, and repeat the previous steps. When the alarm is sounding, touch the Snooze button to delay the alarm by 9 minutes, or press any of the alarm off buttons to silence the alarm. If the alarm is not silenced, it will continue to sound for 30 minutes, before turning off automatically. To enable to disable the alarm, press the Alarm 1 or Alarm 2 button. The alarm LED will disappear once the alarm has been disabled. We hope you enjoy your Magnasonic CR20 Alarm Clock Radio
How to Scan Film, Slides and Negatives with the Magnasonic FS52 All In One Film and Slide Scanner Magnasonic 2020-07-22 | The Magnasonic FS52 saves your film, slides and negatives digitall. In this video, we will show you how to convert those memories to high-quality images in just seconds. 0:15 Setup0:31 Formatting the SD Card1:08 Loading Your Film1:37 Preparing to Scan 2:03 Editing the Photo 2:20 Capturing 2:42 PC TransferMagnasonic FS52 All-in-One FIlm, Slides and Negative Scanner: magnasonic.com/all-in-one-22mp-film-and-slide-scannerYouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonic
Magnasonic FS52 All-In-One Film & Slide Scanner - Converts/Digitizes Film Negatives and Slides Magnasonic 2020-07-21 | Save your treasured film, slides and negatives digitally with the Magnasonic Film Scanner. This digital converter delivers high quality jpeg images and takes just seconds to scan and save each memory you want to preserve. Compatible Film includes:- 35mm- 110mm- 126mm- Super 8- 8mm- 135/110/126 slidesBRING BACK THE MEMORIES – Easily and quickly converts 35mm/110/126/ Super 8/8mm negatives & 135/110/126 slides into high resolution 22MP digital JPEG files MULTIPLE VIEWING OPTIONS – Using the built-in 2.4” LCD screen, view your film & slides directly on the scanner or use the included RCA video out cable to view on your TVBUILT-IN MEMORY & SD CARD SLOT – Save your photos directly onto the digital film converter with its 64MB of internal memory or use an SD card (up to 32GB) to store even more scanned imagesNO COMPUTER NEEDED – No complicated or expensive photo-editing software or driver installation required, you can adjust brightness and color directly on the scannerFAST & EASY SCANNING – Simple setup for frustration-free operation and effortlessly scan your photos in less than 5 seconds each with the included fast-loading film traysTo purchase The Magnasonic FS52 or access online resources and support use the following link:magnasonic.com/all-in-one-22mp-film-and-slide-scannerFOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonic
Magnasonic CD2800 Professional Ultrasonic Jewelry Cleaner Magnasonic 2020-06-23 | The Magnasonic CD2800 Professional Ultrasonic Jewelry Cleaner will restore your valuables to their former glory. Using only water, this cleaner generates 42,000 Hz of ultrasonic waves that gently remove dirt and grime in minutes. You'll get professional results on jewelry, eyeglasses, watches, dentures, razor blades, utensils and so much more. Great for business, commercial or home use, this Ultrasonic cleaner will have your items looking brand new again.For more information, visit magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleaner
Magnasonic MGUC500 Ultrasonic Dental & Jewelry Cleaner Magnasonic 2020-06-23 | The Magnasonic® MGUC500 Digital Ultrasonic Jewelry Cleaner will restore your valuables to their former glory. Using only water, this cleaner generates 42,000 Hz of ultrasonic waves that gently remove dirt and grime in minutes. There are five preset cleaning cycles to choose from, so you can easily control the cleaning intensity you need. You'll get professional results on jewelry, eyeglasses, dentures, razor blades, utensils and so much more. Great for business, commercial or home use, this ultrasonic cleaner will have your items looking brand new again.For more information, visit magnasonic.com/digital-ultrasonic-jewelry-cleaner
Magnasonic FS71 All-In-One Film Negative and Slide Scanner Magnasonic 2020-05-26 | Preserve the memories or give your hobby the quality of scanning it deserves with the Magnasonic FS71 film scanner. The new 5" LCD screen brings each image to life in stunning clarity while the various negative scanner trays ensure you can scan practically any type of film in your photo collection. Save each file to an SD card for easy sharing or connect the scanner to your TV via HDMI input (cable not included) to show your friends and family. *5V 1A Power Adapter Not Included*Compatible Film includes:-35mm-110mm-126mm-Super 8135/110/126 slidesWhat the film scanner can do:PRESERVE OLD MEMORIES - Quickly and easily converts 35mm/110/126/Super 8 film negatives & 135/126/110 slides into high-resolution 22MP digital JPEG filesMULTIPLE WAYS TO VIEW - Using the stunning 5" LCD screen, view your film, slides & scanned images directly on the scanner or use an HDMI cable (not included) to view on your TV or monitorBUILT-IN MEMORY & SD CARD SLOT - With a convenient 128MB internal memory and an SD card slot for up to 128GB of expandable memory you'll be able to scan and save a lifetime of photosNO COMPUTER NEEDED - No complicated or expensive photo-editing software or driver installation required, You can adjust brightness, RGB color correction, flip and mirror directly on the scannerFAST & EASY SCANNING - Simple setup for frustration-free operation to effortlessly scan your photos in less than 5 seconds each with the included fast-loading film trays To purchase The Magnasonic FS71 or access online resources and support use the following link: magnasonic.com/5-inch-film-scanner-with-hdmiFOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfTwitter: twitter.com/magnasonic
How To View Scanned Photos on a Computer From The Magnasonic FS71 24MP Digital Film Scanner Magnasonic 2020-05-12 | In this video, we walk you through the process of how to view the photos you've scanned using your Magnasonic FS71 All In One Film Scanner. This can be done on both Windows and Apple operating systems using the provided USB cable.Compatible with 35mm/110/126/Super 8 film and 135/126/110 slides.Magnasonic FS71: magnasonic.com/5-inch-film-scanner-with-hdmiFacebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How To Set Up and Use the Magnasonic FS71 24MP Film Scanner Magnasonic 2020-05-07 | Change your slides and negatives into pristine, digital files to easily share with friends and family. The all-in-one Magnasonic FS71 Film Scanner creates high-quality 22-megapixel scans from 35mm, super 8, and slide film! Each scan is converted to a JPEG image file which can be transferred directly to your computer. Preview and edit your photos before scanning using the extra large 5-inch LCD display or connect to your TV via HDMI!*5V 1A Power Adapter Not Included*This video will walk you through all the steps to operate your FS71!CHAPTERS 00:00 - Intro00:12 - Connecting the scanner to a power source00:43 - Setting up the FS71 and SD card00:54 - Connecting HDMI01:20 - Film compatibility overview01:39 - Choosing resolution02:00 - Cleaning the sensor02:11 - Loading your film02:55 - Entering capture mode and quick editing03:25 - Efficient scanning of film strips and slidesTo purchase The Magnasonic FS71 or access online resources and support use the following link: magnasonic.com/5-inch-film-scanner-with-hdmiFOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfTwitter: twitter.com/magnasonic
Magnasonic Super 8/8mm Digital Film Scanner - Digitizes your old film reel footage to 1080p video Magnasonic 2020-04-29 | Let the memories live forever with the Magnasonic FS81 Super 8/8mm film scanner! Simply mount your 3, 5, or 7 inch reel, choose your settings and start scanning. The FS81 can scan 50 feet of film in just 30 minutes, digitizing it into high definition 1080p video files.View your files on the built in 2.3 inch LCD screen or gather friends and family to watch scanned videos on your TV using the included RCA video out cable. All files are saved to your SD card and can be easily saved to your computer.To purchase The Magnasonic FS81 or access online resources and support use the following link: magnasonic.com/all-in-one-super-8-and-8-mm-film-scannerFOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwFacebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfTwitter: twitter.com/magnasonic
How to Set the Time and Alarm on the EAAC601 Projection Alarm Clock Radio Magnasonic 2020-04-15 | With a projection display, dual alarms, temperature, and 3.6" backlit LCD display, the EAAC601 Projection Alarm Clock Radio is the only alarm clock you'll ever need. In this video, we will show you how to set the timezone, time, and alarm.--------FEATURED--------EAAC601 Projection Alarm Clock Radio - magnasonic.com/projection-alarm-clock-radio?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=EAAC601--------IN THIS VIDEO--------00:00 - Intro00:09 - Setting the timezone00:45 - Setting the date and time 01:33 - Setting the alarm--------FOLLOW US--------Facebook - facebook.com/Magnasonic?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=EAAC601Twitter - twitter.com/magnasonic?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=EAAC601Blog - https://blog.magnasonic.com?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=EAAC601--------TRANSCRIPT--------In this video, we will show you how to set the timezone, set the time, and alarm, with the Magnasonic EAAC601 Projection Alarm Clock.SETTING THE TIMEZONEWhen you first plug in the alarm clock, you will be prompted to set the time zone. The default is Eastern time. For other timezones, use the arrows and select one of these options. Then, press Set on the top of the clock. To set the timezone after initial setup, press and hold the Snooze button, and repeat these stepsSETTING THE DATE AND TIMETo set the time, press and hold “SET”on the top of the clock. Use the arrow buttons to select year, and press Set to confirm. Select the month, and press Set. And Day, and press Set. Select whether you want the 12 or 24 hour clock, and press Set. When the 12 hour clock is selected, the PM indicator will show during PM hours. Set the hour, and minute, and press SET.SETTING THE ALARMThe EAAC601 has two alarms. To set an alarm, select ALARM 1 or ALARM2. In this example, we use ALARM 1. Briefly press ALARM 1. And then press and hold ALARM 1. The display will start flashing.Set the hour using the arrow buttons, then press Alarm 1.Set the minutes using the arrow buttons and press ALARM 1. Set the days that you want the alarm activated for. For one day of the week, select 1-1. For Monday to Friday, select 1-5, for a whole week, select 1-7, for Saturday and Sunday, select 6-7. If you choose 1-1, you must specify a day of the week. You can do this on the next screen. 1 is Monday, 2 is Tuesday, 3 is Wednesday, and so forth. Select the wake option: FM, AM, or buzzer. If you select FM or AM, you will wake to whichever radio station you were listening to last.If you select FM or AM, you will then select the volume. The volume range if 1-15. To set an alarm for Alarm 2, simply repeat these steps for Alarm 2.To view the current alarm settings, press Alarm 1 or Alarm 2. To stop an alarm when it is sounding, press the power button once. To snooze an alarm for 9 minutes, press the Snooze/Sleep button. To disarm an alarm, press and hold Alarm 1 or Alarm 2. When an alarm is activated, the Bell icon will show on the screen. For more information about this and other Magnasonic products, visit Magnasonic.com
Ultrasonic Jewelry Cleaners Compared - UC21, CD2800, MGUC500 Magnasonic 2020-04-15 | At Magnasonic, we have a professional ultrasonic jewelry cleaner for everyone. From the compact UC21, to the five timer presets on the MGUC500, this video will help you determine which professional ultrasonic jewelry cleaner is right for you. --------FEATURED--------UC21 - magnasonic.com/compact-ultrasonic-jewelry-cleaner-uc21?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideoCD2800 - magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleaner?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideoMGUC500 - magnasonic.com/digital-ultrasonic-jewelry-cleaner?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideo--------IN THIS VIDEO--------0:23 - What Can and Cannot Be Cleaned in an Ultrasonic Cleaner 0:47 - Tank Size 1:01 - Cleaning Times1:40 - Which Ultrasonic Cleaner Is Right For me? --------FOLLOW US--------Facebook - facebook.com/Magnasonic?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideoTwitter - twitter.com/magnasonic?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideoBlog - https://blog.magnasonic.com?utm_source=youtube&utm_medium=youtubedescription&utm_campaign=ComparisonVideo--------TRANSCRIPT--------At Magnasonic, we have a jewelry cleaner for everyone. Today we'll show you the UC21, CD2800, and MGUC500 ultrasonic jewelry cleaners. Each of these jewelry cleaners includes one-year warranty and lifetime customer support. Our jewelry cleaners are designed to clean jewelry, eyeglasses, hygiene items, stationery, metal items, and metal utensils. Items that should not be cleaned in an ultrasonic jewelry cleaner are: antique jewelry with loose stones, or jewelry containing soft or porous stones such as amber. When it comes to size, the UC21 can hold 220ml. The CD2800, and MGUC500 both have a 600ml, or 20 ounce tank. The UC21 and CD2800 both have a single timer preset. The UC21 will clean for five minutes, and the CD2800 will clean for 3 minutes. The MGUC500 features 5 adjustable timer settings: 90 seconds, 180 seconds, 280 seconds, 380 seconds, or 480 seconds. The CD2800 and MGUC500 also come with a cleaning basket.So which jewelry cleaner is right for you?The UC21 is the most compact, making it ideal for travelling, or smaller objects like dentures, razor blades, and rings.The CD2800's bigger tank is ideal for when you want to clean bigger items, eyeglasses, valves, nozzles, machine parts, or printer heads. It's also great with necklaces, bracelets, and other jewelry items.MGUC500 can handle everything that the CD2800 can, but the longer cleaning times make it a great option for dirtier items.For information on these and other ultrasonic jewelry cleaners, visit Magnasonic.com
How to Scan Slides with The Magnasonic FS50 22MP Film Scanner Magnasonic 2020-03-04 | Bring your film, slides, and negatives into the digital age with the help of the Magnasonic FS50 Film Scanner. In this video, we will show you how to prepare the scanner and scan your film slides.*5V 1A Power Adapter Not Included*CHAPTERS0:06 - Preparing the FS500:20 - Preparing your slides0:39 - Cleaning the scanner0:45 - Preparing scanner settings1:08 - Scanning your slides1:40 - How to scan continuous slidesTo purchase The Magnasonic FS50 or access online resources and support use the following link: magnasonic.com/all-in-one-22mp-film-scannerFOLLOW US YouTube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbw Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tf Twitter: twitter.com/magnasonic
How to Scan Film, Slides, and Photos with the Magnasonic FS60 Film Scanner Magnasonic 2019-05-30 | The Magnasonic FS60 is a 35mm film and slide scanner that lets you scan both film and photo prints. In this video, we will show you how to scan film and slides, photo prints, and how to move them from the SD card in the FS60, to a computer. -------------------TIME STAMPS-------------------0:36 Scanning film and slides2:30 Scanning photo prints3:06 Viewing photos3:19 Transferring photos to a computer4:15 Formatting the SD card-------------------INSTRUCTIONS------------------- To start the FS60- Insert the included SD Card into the back of the scanner.- Connect the small end of the USB cable to the back of the film scanner, and connect the larger side to the power adapter.- Plug the power adapter into the wall - Hold the power button.- You will be asked to select the PC-to-SD Link option. If you would like to scan photos, select “No” by pressing the okay button. If you want to transfer photos to a computer, skip to the section of this video about transferring photos to a computer. To scan a film negative or slide:- switch the sliders on the top and side of the scanner, to FILM- By default, the scanner is set to 35mm Negative. To scan other types of film, press the TYPE button. You can see what type of film is selected by looking at this icon.- Load your film or slides into the appropriate film tray, and place that tray into the film scanner. To get the best quality scan, ensure that your film is free of dust or scratches, and is loaded into the correct adapter.- To adjust the brightness, press the EV button. Use the up and down arrows to make the image brighter, or darker.- Press OK to scan the picture. It will be saved to the SD card. To scan prints:- Slide the top and side switches to PHOTO.- Remove the photo holder from the bottom of the scanner.- Place the photo on the tray, matching the guidelines for different sizes.- Once you have the photo in place, put the scanner back on the tray.- Select the photo by pressing the SIZE button. Size options are 3.5x5”, 4x6”, 4x4”, 4.2x3.2”, 3.4x2.1”- Press the OK button to scan the photo. To view saved images- Press the Play button.- The arrow buttons can be used to scroll through saved images. To view images, or save them on a computer, follow one of two methods. 1. The first method is simply removing the SD card from the scanner, and inserting it into the SD card slot on your computer, or an external SD card reader attached to your computer. 2. If you do not have an SD card reader:- Disconnect the USB cable from the power adapter and connect it to your computer.- Turn the scanner on. When you see the PC-to-SD Link option again, this time select YES.- The screen of the scanner will turn off while connected to the computer.- Your scanner will show up on your computer as if it were a hard drive.- Open the folder and you will have access to all of the saved photos. These can now be viewed or copied to a folder of your choice. If you would like to format (delete everything from your SD card):- With your SD card in the FS60, press the EV button 3 times- Press the Type button to select YES- Press OK- This will erase all data from the card.- If your SD card is not being read by your FS60, formatting the card is a helpful troubleshooting step.-------------------IN THIS VIDEO-------------------FS60 All-In-One 14MP Film & Photo Scanner magnasonic.com/all-in-one-14mp-film-photo-scanner-fs60?utm_source=FS60Setup&utm_medium=YouTube-------------------FOLLOW US-------------------Facebook: facebook.com/Magnasonic?utm_source=FS60Setup&utm_medium=YouTubeTwitter: twitter.com/magnasonic?utm_source=FS60Setup&utm_medium=YouTube
How to Scan Film and Slides with the FS51 Film Scanner Magnasonic 2019-03-14 | Do you want to scan film and view it on a computer? In this video, we'll show you how to do just that with the Magnasonic FS51 Film Scanner.1. Connect the power adapter to the USB cable. Next, connect the micro USB connection to the back of the FS51. 2. Press and hold the power button. You will see a message on the screen asking if you want to link up the film scanner with a computer. Select "No"3. Select the Film Type by using the "Type" button on the scanner. 4. Load the tray inside the adapter, and then load the adapter into the tray.5. Place the tray into the film scanner. Line up your frame and press OK to scan. Move the film to select your next picture, and press OK again.To adjust the brightness or color, press the RGB button before you scan. You can use the arrow keys to select the brightness, red channel, green channel, or blue channel.To view photos on the computer, use the USB cable to connect the film scanner to the USB input on your computer.1. Turn on the film scanner. This time, select "Yes" on startup.2. The film scanner will show up as a Hard Drive on your computer. Navigate to the drive to view your photos.FS51 All-In-One 23MP Film Scanner: magnasonic.com/all-in-one-23mp-film-scanner?utm_source=FS51Setup&utm_medium=YouTubeFollow us on:Facebook: facebook.com/Magnasonic?utm_source=FS51Setup&utm_medium=YouTubeTwitter: twitter.com/magnasonic?utm_source=FS51Setup&utm_medium=YouTube
How to Connect HDMI ARC, Bluetooth, USB and AUX on the Magnasonic SB41 Soundbase Magnasonic 2019-03-13 | The Magnasonic SB41 Home Theater soundbase provides big theater performance without taking up the space of a larger surround sound system. In this video, we will show you how to set it up with a number of different devices.Use the Source button on the top of the soundbase, or the included remote control, to select your input. An LED on the front of the soundbase will indicate which input is selected - Green for AUX, Blue for Bluetooth, Orange for USB, and white for HDMI ARC.HDMI ARC stands for Audio Return Channel. It sends an audio-only signal to your sound base, through one HDMI cable. Simply press Source until the white LED flashes, or select HDMI ARC on the remote. Plug in one end of your HDMI cable to the HDMI ARC port on your ARC enabled television, and plug the other end into the HDMI input on your soundbase. HDMI ARC on the Magnasonic SB41 does not support Dolby Digital or DTS sound, so you may have to set the audio output on your device to PCM or Stereo. You may also have to enable the "External Speakers" function of your television.SB41 Home Theater Soundbase magnasonic.com/sb41-home-theater-soundbase?utm_source=SB41Setup&utm_medium=YouTubeFollow us on:Facebook: facebook.com/Magnasonic?utm_source=SB41Setup&utm_medium=YouTubeTwitter: twitter.com/magnasonic?utm_source=SB41Setup&utm_medium=YouTube
How to Clean Jewelry and Hygiene Items with the UC21 Ultrasonic Cleaner Magnasonic 2019-02-27 | The Magnasonic UC21 Ultrasonic Jewelry cleaner is the perfect size for everything from hygiene items to fine jewelry. In this video, we will show you how to use your UC21 ultrasonic cleaner.Unscrew the lid.Add water until it reaches between the minimum and maximum markings inside the tank.Submerge your items in the water.Plug in the cleanerPress the power button to start a five-minute cleaning cycle. During this cleaning cycle, low buzzing sounds are completely normal. You will also notice a rippling in the water.The ultrasonic cleaner has an automatic shut off feature and will stop running once the five-minute cleaning cycle is complete. To stop the cycle before five minutes, press the power button again.It also has an automatic shutoff that will automatically power off the cleaner if it gets too warm. When this occurs, the LED indicator will turn red, and you will not be able to use the unit until it cools down.Magnasonic UC21 Ultrasonic Dental & Jewelry Cleaner - magnasonic.com/compact-ultrasonic-jewelry-cleaner-uc21?utm_source=UC21Video&utm_medium=YouTubeFollow us on:Facebook: facebook.com/Magnasonic?utm_source=UC21Video&utm_medium=YouTubeTwitter: twitter.com/magnasonic?utm_source=UC21Video&utm_medium=YouTube
How to Play Music Using the Aux Input on the Magnasonic CR65 Bluetooth Alarm Clock Radio Magnasonic 2019-01-16 | Magnasonic CR65: magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Aux&utm_medium=YoutubeThe Magnasonic CR65 Alarm Clock Radio gives you the option to play music using the 3.5mm Aux Input. To do so, follow these steps: • Connect your 3.5mm AUX Cable – one end to your device, and the other end into the AUX IN input on the CR65.• Press the “Power Button” to turn on the music function.• Press “Source” until the AUX IN icon appears on screen.To adjust the playback volume, use the volume up and down buttons on the right side of the clock. Your device volume will affect the playback volume. We recommend turning device volume up fully, then adjusting the clock volume to find the right setting for you.- - -Facebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to use Your Magnasonic CR65 Alarm Clock Radio as a Bluetooth Speaker Magnasonic 2019-01-16 | Magnasonic CR65: Speaker magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Speaker&utm_medium=YoutubeYour Magnasonic CR65 Alarm Clock Radio can be used to play music from any Bluetooth enabled device!Simply follow these steps:• Press the “Power Button” to turn on the radio• Press “Source” until the Bluetooth logo appears on screen• The icon will begin to flash• Open the Bluetooth settings on your smartphone• Select Magnasonic CR65 from the listTo adjust the playback volume, use the volume up and down buttons on the right side of the clock. Your device volume will affect the playback volume. We recommend turning device volume up fully, then adjusting the clock volume.You may use the arrow keys to adjust the track forward and back. This feature is available in Bluetooth mode only and does not work when listening to music with the auxiliary input. If another device is paired with the CR65, and you would like to pair a new device, press and hold the Bluetooth button for 3 seconds to reset Bluetooth- - -Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Record a Custom Alarm on your Magnasonic CR65 Alarm Clock Radio Magnasonic 2019-01-16 | magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Custom&utm_medium=YoutubeThe Magnasonic CR65 Alarm Clock Radio gives you the option to record your own custom alarm. Record your own alarm using these easy steps:• Make sure that any music functions such as radio are off. The recording feature will not work if the music functions are on.• Press and hold the record button on the back of the clock. You will see a microphone icon appear.• Continue to hold the record button, you can record up to 30 seconds.• Once you finish recording, release the button.• To hear your recording, press the play button, located next to the record button.• To wake up to your recording, select “rec” when selecting your alarm source, and move your alarm to the Music Note icon. For full instructions for setting an alarm, see our How To Set An Alarm video.• You may re-record over your current recording. Or, you can clear your recording by holding the “PRESETS” button for 3 seconds while the music function is OFF.- - -Facebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to use the Dimmer Function on the Magnasonic CR65 Bluetooth Alarm Clock Radio Magnasonic 2019-01-16 | Magnasonic CR65: magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Dimmer&utm_medium=YoutubeThe Magnasonic CR65 USB Charging Alarm Clock Radio includes an adjustable dimmer so you can see your clock day and night.The available settings are:• Off• Lo1• Lo2• High• AutoAuto-dimming adjusts automatically using a sensor on the back of the clock. When the room is dark, the display will darken. When the room is bright, the display will brighten so you can easily read the time regardless of the time of day and lighting in the room.For the sensor to work correctly, the sensor should be kept clear of obstructions. If the clock is placed in a dark area such as within a shelf, it may not display correctly on auto.Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Set the Time Zone on your Magnasonic CR65 Bluetooth Speaker Alarm Clock Radio Magnasonic 2019-01-16 | Magnasonic CR65: magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Timezone&utm_medium=YoutubeThe first time you turn on your Magnasonic CR65 Bluetooth Speaker Alarm Clock Radio, the time will be preset. To match this time to your location, you will need to select your time zone. Using the arrow buttons, you can cycle through numbers 0 to 7. The time zones are listed on a sticker you will find on the front of the clock. Once you have the correct time zone, press Set to confirm your selection.You may also change your time zone by pressing and holding the Timezone button on the back of your clock. - - -Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to use Radio Presets on the Magnasonic CR65 Bluetooth Alarm Clock Radio Magnasonic 2019-01-16 | Magnasonic CR65: magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=presets&utm_medium=YoutubeYour Magnasonic Alarm Clock Radio can save up to 10 different AM and 10 Different FM stations as presets, so you can listen to the music you want, when you want.To create presets, follow these simple steps:• Select the radio station you want to save as a preset.• Press and hold the “PRESETS” button.• The letter “P” followed by a flashing number will appear.• Use the left and right arrow buttons to select which of the 10 presets you want to save the station as.• Press the “SET” Button to save your selection. The preset number will flash twice.• Repeat these steps for any other stations.To use these presets, press the “PRESETS” button to scroll through the 10 preset stations.Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Set the Alarm on Your Magnasonic CR65 Alarm Clock Radio Magnasonic 2019-01-16 | Magnasonic CR65: magnasonic.com/bluetooth-speaker-alarm-clock-radio-with-usb-charging-projection?utm_source=Alarm&utm_medium=YoutubeThis video will walk you through the process of setting the alarm on your Magnasonic CR65 Alarm Clock Radio. Facebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Package a Magnasonic Alarm Clock Radio for Shipping or Transport Magnasonic 2018-12-12 | This video takes you through the process of packing your Magnasonic Clock Radio for shipping or transport.Clock Radios: magnasonic.com/clock-radiosFacebook: facebook.com/MagnasonicTwitter: twitter.com/magnasonic
Magnasonic Ultrasonic Jewelry Cleaner Features Compared Magnasonic 2018-08-09 | At Magnasonic, we have a professional ultrasonic jewelry cleaner for everyone. From the simple on/off operation of the CD2800, to the large tank and Dual Wave cleaning of the UC71, this video will help you determine which professional ultrasonic jewelry cleaner is right for you. Products featured in this video: CD2800: magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleanerUC31S: magnasonic.com/professional-ultrasonic-jewelry-and-eyeglass-cleanerMGUC500: magnasonic.com/digital-ultrasonic-jewelry-cleanerUC71: magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleaner-with-large-tankFacebook: https://www.facebook.com/Magnasonic/?...Youtube: https://www.youtube.com/channel/UCQtA...Twitter: twitter.com/magnasonicAt Magnasonic, we have a jewelry cleaner for everyone. Today we'll show you the CD2800, MGUC500, and UC71 ultrasonic jewelry cleaners. Each of these jewelry cleaners includes a cleaning basket, one-year warranty, and lifetime customer support.Our jewelry cleaners are designed to jewelry, eyeglasses, hygiene items, stationary, metal items, and metal utensils. Items that should not be cleaned in an ultrasonic jewelry cleaner are: Antique jewelry with loose stones, or jewelry containing soft or porous stones such as amber.CD2800, and MGUC500 have a 20 ounce tank. UC71 includes a 28 ounce tank for cleaning larger items.UC71 also utilizes dual wave technology which doubles the ultrasonic waves for a more thorough clean on heavily soiled items.Each cleaner runs on a timer. CD2800 has a single preset 180 second timer, MUGC500 and UC71 features several adjustable timer settings.You may ask yourself which jewelry cleaner is the right option for you.CD2800 gives you simple on/off operation with it’s 180 second timer. This cleaner is available in white and silver models.MGUC500 is a great all-around option with a digital timer and adjustable cleaning cycles.For heavy duty cleaning and larger items items, UC71 features dual wave cleaning, and large tank.
How to Set the Time and Alarm on the Magnasonic EAAC200/EAAC201 Digital AM/FM Clock Radio Magnasonic 2018-06-19 | This video will walk you through the process of setting up your EAAC200 Magnasonic Clock Radio for the first time. This video will cover how to set your time and alarm. For more information on setup and general use, visit the following link!EAAC200 Digital AM/FM Clock Radio: magnasonic.com/digital-am-fm-clock-radioFacebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
Portable 6 Can Mini Fridge Cooler & Warmer (MF41) Magnasonic 2018-05-07 | Enjoy cool drinks and warm snacks on the go thanks to the Magnasonic Mini Fridge with both cooling and warming functions. Its thermoelectric technology heats and cools with just the flick of a switch, no Freon needed. With its 4L capacity, you can easily store bottled water, soda cans, sandwiches, soups, fruit, snacks, and even medication. Compact and lightweight, conveniently use it in your car or office with included power cables.Get the Magnasonic Portable 6 Can Mini Fridge Cooler & Warmer today:
How to Set the Time on Your Magnasonic CR61, CR62, CR63 or CR64 Alarm Clock Radio Magnasonic 2018-03-19 | This video will walk you through the process of setting the time on your CR61, CR62, CR63, or CR64 Magnasonic Alarm Clock Radio. Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Set Up Your Magnasonic CR61 or CR62 USB Charging Alarm Clock Radio for the First Time Magnasonic 2018-03-19 | This video will walk you through the process of setting up your CR61 or CR62 Magnasonic Clock Radio for the first time. This video will cover Time and Dimmer Setup. Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Set the Alarm on Your Magnasonic CR61 or CR62 Clock Radio Magnasonic 2018-03-19 | This video will walk you through the process of setting the alarm on your CR61 or CR62 Magnasonic Clock Radio. The clock will allow you to set the alarm in several different configurations covered in this video. Facebook: facebook.com/MagnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
Alarm Clock Radio With Time Projection (CR62 & CR62W) Magnasonic 2018-03-14 | Start Everyday with Simplicity.We developed the world’s easiest to use alarm clock and packed it with innovative & useful features. Plug it in, select your time zone and it automatically sets the time. It even adjusts itself for Daylight Savings Time. Set it once and don’t worry about it again.Get the Magnasonic Alarm Clock Radio With Time Projection today:http://www.magnasonic.com/alarm-clock-radio-with-time-projection-cr62-black
Alarm Clock Radio With Battery Backup (CR61 & CR61W) Magnasonic 2018-03-14 | Start Everyday with Simplicity.We developed the world’s easiest to use alarm clock and packed it with innovative & useful features. The intuitive setup process allows you to be up and running in seconds without confusion or inconvenience. It even adjusts itself for Daylight Savings Time.Get the Magnasonic Alarm Clock Radio With Battery Backup today:http://www.magnasonic.com/alarm-clock-radio-with-dual-gradual-wake-alarm-black
Alarm Clock Radio With USB Charging (CR63 & CR63W) Magnasonic 2018-02-23 | ALARM CLOCK RADIO WITH USB CHARGINGStart your morning right with the Magnasonic USB Charging Alarm Clock Radio.Get the Magnasonic Alarm Clock Radio With USB Charging today:http://www.magnasonic.com/alarm-clock-radio-with-usb-charging
How to use a Magnasonic Ultrasonic Jewellery Cleaner to Get Amazing Results Magnasonic 2018-01-24 | In this video, we walk you through the process of using your Magnasonic Ultrasonic Jewellery Cleaner. We cover basic and enhanced cleaning instructions as well as what can, and can’t be cleaned in an ultrasonic cleaner. This basic tutorial applies to the MGUC500, CD2800, UC71 and all colour variants. Results and steps may vary by model.MGUC500: http://www.magnasonic.com/digital-ultrasonic-jewelry-cleanerCD2800: http://www.magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleanerUC71: http://www.magnasonic.com/professional-ultrasonic-jewelry-eyeglass-cleaner-with-large-tankFacebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfTwitter: twitter.com/magnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbw
How to Reset a Magnasonic Clock Radio to Factory Defaults Magnasonic 2017-12-22 | We show you how to easily reset any Magnasonic Clock Radio to factory defaults. These steps can be used in the event a clock behaves in an unexpected way.http://www.magnasonic.com/clock-radiosFacebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfTwitter: twitter.com/magnasonicYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbw
Alarm Clock Radio With USB Charging & Projection (CR64 & CR64W) Magnasonic 2017-12-05 | MAGNASONIC PROJECTION ALARM CLOCK RADIO WITH USB CHARGINGWake up on the right side of bed with the Magnasonic USB Charging Projection Alarm Clock Radio.Get the Magnasonic Alarm Clock Radio With USB Charging & Projection today:http://www.magnasonic.com/alarm-clock-radio-with-usb-charging-projection
How to Set Up Your Magnasonic USB Charging Alarm Clock Radio for the First Time Magnasonic 2017-12-05 | This video will walk you through the process of setting up your CR63 or CR64 Magnasonic Clock Radio for the first time. This video will cover Time and Dimmer Setup. For more information on setup and general use, you can find the manuals at these links!CR63: http://www.magnasonic.com/alarm-clock-radio-with-usb-charging CR64: http://www.magnasonic.com/alarm-clock-radio-with-usb-charging-projection Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
How to Set the Alarm on Your Magnasonic CR63 or CR64 Clock Radio Magnasonic 2017-12-05 | This video will walk you through the process of setting the alarm on your CR63 or CR64 Magnasonic Clock Radio. The clock will allow you to set the alarm in several different configurations covered in this video. For more information on setup and general use, you can find the manuals at these links!CR63: http://www.magnasonic.com/alarm-clock-radio-with-usb-charging CR64: http://www.magnasonic.com/alarm-clock-radio-with-usb-charging-projection Facebook: facebook.com/Magnasonic/?fref=ts&ref=br_tfYoutube: youtube.com/channel/UCQtAajCqvkIwQIcAg3qGAbwTwitter: twitter.com/magnasonic
Magnasonics LED Pocket Pico Video Projector Featured on CTV Magnasonic 2017-07-25 | Our Magnasonic LED Pocket Pico Video Projector HDMI, Rechargeable Battery, Built-in Speaker, DLP, 60” Hi-Resolution Display for Streaming Movies, Presentations, Smartphones, Tablets, Laptops (PP60) was featured during CTV's Your Morning show! http://www.magnasonic.com/led-pocket-pico-video-projector - WORLD’S SMALLEST portable DLP projector (only 3.9 x 3.0 x 0.5”) with HDMI connection, allows anyone to project big, vivid videos & photos up to 60” in size for work & play- Easy to use plug & play projector is perfect at home or in the office with its bright 25 lumen LED DLP light engine, crystal clear 640 x 360 resolution, & 1100:1 contrast ratio- Watch all your favorite movies or make an impressive business presentation anywhere with its portable, lightweight design & long lasting 2 hour rechargeable battery (2100mAh)- Comes with HDMI, Micro HDMI, MHL cables & Samsung Galaxy adapters that allow you to project from your smartphone, tablet, laptop, media player & any other HDMI video player (Note: Apple devices require an adapter – sold separately, Android devices require MHL feature – see your device’s manual for compatibility)- With its internal speaker, enjoy audio from your videos or use the 3.5mm headphone jack to connect external speakers or earphones of your choice
