Explaining the 3rd mirror beam alignment for your co2 laser American Photonics 2020-09-17 | An in depth look at getting perfect beam alignment. By American Photonics
Omtech Polar lens upgrade by American Photonics. American Photonics 2023-09-11 | Protect your investment. Clean your lens daily. This product is 100% made in the USA by American Photonics.
Cleaning your Co2 laser (ZnSe) lens. American Photonics 2022-01-16 | Steve Walters / American Photonics explains cleaning your lens and shows different lens products.If you chose to use rubber/latex gloves make sure they are free of moisturizer and powder.It will not damage the lens if you need to soak it in alcohol or acetone to remove stubborn stains.If you are getting staining immediately address the air flow problem causing it.
Simple upgrades for your K40 OMTech Co2 laser American Photonics 2021-08-13 | Get the best results results from your machine with some simple cost effective upgrades. Americanphotonics.com
Co2 laser Focal Point Tolerance American Photonics 2021-02-03 | Understand why you should use a 1.5" focal length lens for engraving and a 4" focal length for cutting. American Photonics is constantly working to improve the quality of your Chinese design Co2 laser.
Co2 laser Mirrors 101. everything you wanted to know but were afraid to ask. American Photonics 2021-01-23 | American Photonics talks about the 4 different types of Co2 laser mirrors
Cutting 18mm plywood with no smoke.with an American Photonics lens American Photonics 2020-12-01 | With perfect alignment and a high quality lens this 100 watt machine has very little wasted energy.
Co2 laser Beam Combiners by American Photonics American Photonics 2020-11-20 | Explaining the basics of a Co2 laser Beam Combiner. What you need to be concerned about when installing them, and a look at the new products developed by American Photonics to make your machine work better.
OMTech Beam Alignment. For the beginners and experts American Photonics 2020-10-12 | Starting with step 1- leveling your bed. Step 2- getting your head square. After those steps are complete, we go over how to move the mirrors, and what we are trying to accomplish as we move them. This is a complementary video to "Explaining the 3rd mirror" and "Perfect beam alignment". youtube.com/watch?v=6iQvxw20CKU&tyoutube.com/watch?v=CHCZq1WBk7o&t
Perfect beam alignment for your Chinese design Co2 laser American Photonics 2020-08-28 | Explaining the importance of the 3rd mirror beam alignment and the best way to get it perfect by American Photonics.
ZnSe. What are the different types, and how are they used. American Photonics 2020-08-19 | ZnSe invented in 1948 patented in 1950 by RCA. Perfected by Dow chemical and II-VI. American Photonics holds $millions in inventory. This exotic crystal is the substrate for over 80% of the optics produced at American Photonics.
Power meter instructions from American Photonics American Photonics 2020-06-15 | This $30 power meter will help diagnose problems with your tube, mirrors and lens. set up the power profile of your machine when it is new and monitor the life of your tube.
K40 lens & lens head upgrade fro American Photonics American Photonics 2020-06-13 | see 2 different K40 upgrades and the laser alignment tool that goes with it.
K-head Co2 laser lens head upgrade from American Photonics American Photonics 2020-06-10 | 100% made in the USA lens and head
How to select the correct glued Lens Tube or Alignment tool for your machine. American Photonics 2020-06-10 | The glued lens tube and the Alignment tool are the same size Please let this video help you select the correct size for your machine.
K40 power settings to not damage your tube! American Photonics 2020-06-02 | American Photonics is work to make your machine work better and last longer.
K40 alignment by American Photonics American Photonics 2020-06-01 | K40 10 minute alignment challenge using my alignment tool.
K40 co2 laser lens upgrade & lens head upgrade from American Photonics American Photonics 2020-04-30 | Both of these products are 100% made in the USA.For all the K40 products offered by American Photonics.american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser/k40-upgrades
CO2 Laser Alignment Tool get perfect beam alignment from American Photonics American Photonics 2020-04-28 | The reverse laser will do very little for lining up the 1st mirror. The same as your Co2 laser does little to nothing to help line up your 3rd mirror. Also the Co2 laser does nothing to tell you where your beam should enter the lens head (most people aim for the center of the hole). As an optical engineer I can't express enough the importance of your beam hitting the center of the lens at exactly 90deg. It will obviously still work if not perfect but if you want better quality you will want perfect beam alignment.To learn more about American Photonics and our products.american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser_ _ _ American PhotonicsOfficial Communication Channels: Phone: (941) 752-5811Email: natalia.p@americanphotonics.comWebsite: american-photonics.myshopify.com
ZnSe lens manufacturing at American Photonics (coring) American Photonics 2020-04-28 | Selecting the raw material and coring.To learn more about American Photonics and our products.american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser
Co2 Laser ZnSe Beam Combiner stress test American Photonics 2020-04-17 | This shows how soft ZnSe is and how easily it is deformed from overtightening. Stressed ZnSe will not perform properly. You can expect loss of power, beam distortion, over heating. reduced performance for engraving and cutting and possibly crystal failure.To learn more about American Photonics and our products.american-photonics.myshopify.com/collections/mark-and-engrave-co2-and-fiber-laser
