badmephistoEver wondered how you can solve the Rubik's Cube? From my 2 years of cubing experience, I firmly believe this to be the easiest and best beginner's method for solving the Rubik's Cube.
How to solve a Rubiks Cubebadmephisto2009-07-25 | Ever wondered how you can solve the Rubik's Cube? From my 2 years of cubing experience, I firmly believe this to be the easiest and best beginner's method for solving the Rubik's Cube.
Say hi on Facebook page sometime! http://www.facebook.com/badmephistoBeginners: Standardize your cross (and other stuff too)badmephisto2011-02-09 | This is tutorial that addresses a problem that I see with many people who start solving the cube. They twist it around, and do weird things. Instead, here are a couple of tips on how you can standardize your cross. (but you should be applying same ideas to different parts too). If you keep solving it exactly in the same way over and over again, you will be able to improve faster. That's because you will spend MUCH less time thinking about the moves, and everything will be much more automatic, even if it can sometimes take a bit longer to solve, in terms of the number of moves.
So the main point here is: Standardizing your solves (i.e. making them look as similar as possible) is almost just as important as doing the "right" moves. Your thinking takes a long time when you try to be "right". There is a tradeoff, learn to optimize it.
Good luck!!Tips/Tricks for learning OLL/PLL [New!]badmephisto2010-09-01 | This video tries to show you that learning the OLLs and the PLLs is not as hard is it may look at first glance. Yes, the algorithm pages may look very dense with letters, but there is a lot of structure in this mess, and 80% of it is very easy to memorize. So let me point out the patterns, and give you a few tips!
My iPhone app (omg!!! so excited). So by the way it took a lot of effort to get this to the app store, the entire review process is extremely tedious and frustrating.
http://badmephisto.com/iphone
Andy Klise printable sheets
http://www.kungfoomanchu.com4096 subs, thoughts on channel, other stuff I dobadmephisto2009-08-28 | This is one of the obligatory subs thresholds videos, where I get to thank all of you for being a great bunch of subscribers.
My thoughts on the channel going forward, some other channels I might make, and other stuff I do in my spare time.
Fractalmath channel:
http://www.youtube.com/user/fractalmathHow to become a Speedcuber [New!]badmephisto2009-07-02 | Watch this video if you just learned how to solve the Rubik's Cube, and now want to know how you can get faster. It is an introduction to the world of speedcubing! First I go over the speedcubing method, and how it works, and at the end I give out important links that you will find very useful.
description for the mathematically inclined:
The program simply follows the perpendicular of the first order approximation of the image gradient of the pixel intensities. Every path containing a high number of high intensity gradients is stored as a stroke. These strokes are ranked in order of "goodness", that is a function of both the length and intensity of that stroke. The pencil then shades these strokes in around the image, starting with the strong strokes, and going towards the light strokes at the end. Strokes that are close to each other are likely to be drawn consecutively for more pleasing visual effect.
made using python (with pygame library)Editing videos using Sony Vegas : Tutorial / Crash coursebadmephisto2009-05-17 | This video shows you how you can edit and create your own videos, so that we have less crap here on YouTube Effects I cover:
Speeding up/Slowing down, Fading out, Transition effect, Video effects like blur etc., Inserting text, images.
If something goes wrong, remember CTRL+Z (UNDO) is your friend!
Google is your second best friend.
Compression:
Virtual Dub http://virtualdub.sourceforge.net ---OR---
tutorial on how to set this up in Vegas:
http://www.youtube.com/watch?v=W6LpQ0ZyqgI your lists, depending on what codecs your computer has, will most likely look different. Just try things.Rubiks Cube Cross on bottom: tips and fingertricksbadmephisto2009-05-14 | Some more tips on solving the cross, primarily on how to do it fast. I show some fingertricks that I use for cross on bottom.
remember that cube rotations are not exactly evil, and I sometimes do even 4 or 5 in a solve, but often they can be avoided, and it is important to know when this can be done.Rubiks Cube: Setting up casesbadmephisto2009-02-15 | This is a quick tutorial on how you can set up various OLL/PLL cases.
Many of you may already know this.Tetris Artificial Intelligence (AI) #2badmephisto2009-01-14 | This is my second attempt in producing AI for Tetris.
Grid size is 10x20
I made this in Python
It almost always does more than 1000 lines, and most I've seen it do was about 5000. Unfortunately I don't possess enough computing resources to have it learn more and fine tune the parameters as much as I'd like, but this will do for now! :)
music: Tetris by 2amRecognizing the PLLsbadmephisto2009-01-14 | Tips on how you can more quickly identify the PLLs in the Fridrich Method.
Names for PLLs:
http://www.ws.binghamton.edu/fridrich/Mike/permute.htmlAnother milestonebadmephisto2008-12-29 | I ramble about the base10 number system, answer commonly asked questions, and display what happens when you take away my recognitionMy average of 5: 15.49 Dec23 08badmephisto2008-12-23 | Now that the school is over I've been practicing :)
These were pretty decent solves. I usually average slightly above this lately.
Cube: cube4you DIY type D (but they changed them since I got them... get an A or something)
Lubricant: Jigaloo
14.78
(16.20)
15.92
15.79
(14.60)
avg: 15.49Blindfold method: Clarificationsbadmephisto2008-12-01 | I give some clarifications and tips on my blindfold method video. Issues discussed:
1. Parity fix clarification
2. My example solve and why it was confusing
3. Green Orange vs. Orange Green
4. Flipped/Twisted edges and corners
5. M2R2 method
http://www.stefan-pochmann.info/spocc/blindsolving/M2R2 6. Keeping track of solved/unsolved piecesGraph Layout using force based approachbadmephisto2008-11-23 | Graph Layout, I programmed it in Python using Pygame for drawing.
Graph Layout problem: Given a graph G, display the graph on plane in a "nice" way. (Of course "nice" is hard to define mathematically :))
One approach to solving the problem is defining an energy function of the graph based on relative distances of all nodes, and also taking into account all of the edges. An iterative minimum seeking algorithm is used to greedily push the graph towards the most promising direction. The problem of course comes in when there is a non-trivial arrangement that is best overall, but the algorithm will never find it because it would have to temporarily make the graph worse. To overcome this problem, usually a graph layout is generated at random a couple hundred times, and then the best graph is chosen at the end. Optimality is clearly not guaranteed.Random Cube Tricks #1: Corner liberation&Rotationless insertbadmephisto2008-11-03 | First in my planned series of random tips and tricks for solving the rubik's cube using Fridrich method.
This particular video is on:
1. Best way to handle corners stuck on bottom in F2L
2. Inserting awkward pairs without cube rotations in F2LRubiks Cube One Handed : Tutorialbadmephisto2008-10-14 | Tutorial on how to get into one handed solving of the Rubik's cube
CONCLUSION: I found spraying into 8 edges and taking long time to work in is best. What also worked pretty well was full dissasembly and 2 sweeps of lube.Tutorial: Solve the Rubiks Cube blindbadmephisto2008-09-10 | My attempt at explaining how to solve the Rubik's cube blindfolded (Pochmann method). Its one of the few tutorials on how to do this on YouTube... and now I know why: because its really hard to make one :) Also, you really need to practice this method to get it down, because there are many things to keep in mind. I think I covered them all though. As always, don't hesitate to ask questions, I'm sure I left out some stuff. :(
OUTLINE
start - solving EDGES and all important concepts
9:39 - breaking into new cycles
11:18 - brief summary
13:00 - solving CORNERS
16:50 - PARITY fix
19:00 - Example solve and MEMORIZATION
27:00 - Example solve execution
29:02 - Closing comments
ALGS:
PARITY FIX: Ra: y' [L U2' L' U2'] [L F'] [L' U' L U] [L F] L2' U y
--------------EDGES
ALGS:
T : [R U R' U'] [R' F] [R2 U' R'] U' [R U R' F']
Jb: [R U R' F'] {[R U R' U'] [R' F] [R2 U' R'] U'}
Ja: y' [R' U L'] [U2 R U' R' U2] [R L U'] y
TO SOLVE (EDGES):
YO: Jb
OY: l' Ja l
YG: T
GY: L' d L' T L d' L
YR: Ja
RY: l Jb l'
OG: L' T L
GO: d' L T L' d
OB: d2 L T L' d2
BO: d' L' T L d
BR: d L T L' d'
RB: d2 L' T L d2
RG: L T L'
GR: d L' T L d'
OW: l' Jb l
WO: D' L2 T L2 D
BW: D' l' Jb l D
WB: D2 L2 T L2 D2
RW: l Ja l'
WR: D L2 T L2 D'
GW: D l' Jb l D'
WG: L2 T L2
--------------
--------------CORNERS
ALGS:
Y : {F [R U' R' U'] [R U R' F']} {[R U R' U'] [R' F R F']}
Jb: U2 [R U R' F'] {[R U R' U'] [R' F] [R2 U' R'] U'} U2
Ja: [R' U L'] [U2 R U' R' U2] [R L U']
(note that Jb and Ja have to be executed while holding the cube a little differently.
its as if they required their own little setup moves as well)
TO SOLVE (CORNERS):
YB: Y
BO: F' Jb F
OY: R Ja R'
YR: Ja
RB: R' Y R
BY: R' F' Jb F R
YO: Jb
OG: F R Ja R' F'
GY: F Y F'
OB: R Y R'
BW: F' Y F
WO: R2 Ja R2
BR: D' R Y R' D
RW: R' Ja R
WB: R2 Y R2
RG: D F Jb F' D'
GW: D2 F' Y F D2
WR: D2 R2 Ja R2 D2
GO: F Jb F'
OW: D F' Y F D'
WG: F2 Y F2
number checking formula: #items = (#wrong pieces) + (#cycles) - 2Grid solve, average of 9badmephisto2008-08-27 | That's my clickiest cube :)
I don't know, i thought it looked funny :p
I recommend you watch in high quality because its so small.My new Website, YouTube, and the Wikibadmephisto2008-08-26 | 1000 subscribers last week, w00t! ok links:
thank you for your support, I have a couple of vids already planned.OLLs that I use and a few tipsbadmephisto2008-08-04 | Here are the OLLs that I currently use. I think for at least 95% of them there is no better way.
!!!!IMPORTANT!!!!
Remember! Go SLOW when you practice! Reason things out, ask questions, take time actually THINKING about stuff. Its important and useful. Go through pretty much the same thing I go through in this video. It helps.
oh and youtube screwed me with the quality again. If the option to see this in Good quality comes up, take it. The grainy version will make it hard to see whats going on sometimes, maybe... sigh! And the audio was compressed heavily too. Damn you YouTube!Rubiks cube: my average of 5, 17.3 secondsbadmephisto2008-07-07 | Alright alright, you guys win, here is an average of 5 video. 17.3 is about right, but slightly on the better side. Otherwise I'd say I'm somewhere in 17.3-17.7 range.
I don't usually like to do speedsolves, I prefer nice smooth slow solves with no breaks that yield me averages of about 20, but I know that almost everybody else is about speed primarily, so here you have some fast, crappy looking solves.
Individual Times:
(16.16), (18.67), 17.72, 17.32, 16.86Rubiks Cube: Cross (Advanced)badmephisto2008-06-15 | Here are some insights into how I make the cross in less than 2-3 seconds.
Cube Explorer: http://kociemba.org/cube.htmRubiks Cube: 2 Look PLLbadmephisto2008-05-28 | This is how you solve the Permutation of Last Layer (PLL) only using 6 algorithms as opposed to 21 algorithms that are required for Fridrich PLL. You need to apply two or less of the 6 algorithms to solve each case.
Algs in order:
1. x [(R' U R') D2] [(R U' R') D2] R2
2. R2 U [R U R' U'] (R' U') (R' U R')
3. [R U'] [R U] [R U] [R U'] R' U' R2
4. M2 U M2 U2 M2 U M2
5. M2 U M2 U M' U2 M2 U2 M' U2
6. x' [(R U' R') D (R U R')] u2 [(R' U R) D (R' U' R)]
all algs can also be found on my PLL page:
http://www.cdf.toronto.edu/~g6karpat/plls/pll.htmlRubiks Cube: PLL: memorization, tips, linksbadmephisto2008-04-30 | In this video I go over some simple memorization techniques for PLLs, show you a webpage and a timer that I made for the PLLs, and give some tips/tricks. I didn't have enough time to show you all PLLs but I showed you some things that you should be looking for when you memorize:
- Try to track some pieces (most often F2L pairs or corners)
- Try to look for patterns on top
- If notation is easy, remember that
- Remember you can use blend of all of the above!
As a side note, its totally doable to memorize a PLL every day, thats how I did it.
my PLL webpage:
http://www.cdf.toronto.edu/~g6karpat/plls/pll.html
I cracked under pressure more than I expected, especially 1st round... But in my 2nd round average of 5 I had 17, 19 and the other 3 times my cube exploded :) I need a better cube for next time :p
Fun day! Oh and btw for all the people that complain that they never saw my face, i am briefly at about 1:00, on the right in the purple-white lined sweater :)Advanced F2L Techniquesbadmephisto2008-04-07 | In this video I go over many advanced F2L techniques, such as use of empty slots, stuck pieces, general tips/tricks, etc.
Links:
http://www.cubeloop.com/php/cube/expert.php?chapter=f2l NOTE: The website has some good solutions for some cases, and also some VERY VERY bad solutions for other cases. Exercise your good judgment. It still has some very good ideas that can help you improve. Also note he uses the Japanese color scheme, so his BLUE is my WHITE.
-F2L special cases:
http://www.speedcubing.com/f2l_advanced.html http://www.cubefreak.net/F2L_advanced.htmlRubiks Cube: 2 Look OLLbadmephisto2008-03-27 | 2-look OLL is simply Fridrich OLL step, but done in two stages such that the number of algorithms needed is reduced from 57 to 9.
This way of doing it is still pretty quick and you should be able to get to mid-to-high 20's averages if you use full Fridrich except that you do 2look OLL instead of the Fridrich OLL. You want to start learning all the OLL's at some point anyway though, because many of them are really easy, and they DO speed you up.
Algs:
opposite edges: F (R U R' U') F'
adjacent edges: f (R U R' U') f'
all edges: [F (R U R' U') F'] [f (R U R' U') f']
Anti-Sune: (R' U' R) U' (R' U2 R)
Sune: (R U R') U (R U2 R')
Cross Symmetric: F (R U R' U') (R U R' U') (R U R' U') F'
Cross not symmetric: (R U2) (R2 U') (R2 U') (R2 U2 R)
-----------------or: [f (R U R' U') f'] [F (R U R' U') F']
Headlights: (R2' D) (R' U2) (R D') (R' U2 R')
Chameleon: (r U R' U') (r' F R F')
Diagonal Corners orient: F' (r U R' U') r' F RF2L Fingertricksbadmephisto2008-03-07 | Here are some examples of fingertricks that i developed for Fridrich F2L.
Lubricant I use (Jig-a-loo):
http://www.jigaloo.com/en/where BTW: I had some people tell me that Jig-a-loo actually damaged their cube. So I don't think it works well for all cubes. It worked fine on my cube4you DIY type A, and D. I didn't test it with anything else.
F2L solutions:
http://www.cubewhiz.com/f2l.html http://www.cubestation.co.uk/cs2/index.php?page=3x3x3/cfop/f2l/f2lRubiks Cube: Fridrich F2L explained (PART2/2) [New!]badmephisto2008-03-02 | F2L Tutorial Remade! My attempt at logically explaining exactly how the F2L in the Fridrich method works, so that you will never have to learn the algorithms for it. The method that I explain here is foolproof, meaning that it works every time, but takes a little longer. Placing one corner-edge pair should not take more than about 7 or 8 moves. If some move is taking you longer, it is probably a good idea to brute force learn the algorithm for it. This is however quite rare, so you don't have to worry about it unless you want to go for below 20 seconds or so, full solve.
NOTE: please be aware that the way I handle the cases here is NOT always optimal. I am just trying to show a foolproof way of handling F2L in general, and most of the cases I showed for example in the Example Solves can be done MUCH faster. Look into the solutions, or try to derive the fast versions yourself!Rubiks Cube: Fridrich F2L explained (PART1/2) [New!]badmephisto2008-03-02 | LINK TO PART2: http://ca.youtube.com/watch?v=4GxLM_dZqg4
F2L Tutorial Remade!
My attempt at logically explaining exactly how the F2L in the Fridrich method works, so that you will never have to learn the algorithms for it. The method that I explain here is foolproof, meaning that it works every time, but takes a little longer. Placing one corner-edge pair should not take more than about 7 or 8 moves. If some move is taking you longer, it is probably a good idea to brute force learn the algorithm for it. This is however quite rare, so you don't have to worry about it unless you want to go for below 20 seconds or so, full solve.
Part1: Case1, Case2
Part2: Case3, examples
links to solutions:
http://www.opticubes.com/cubing/f2l http://www.cubestation.co.uk/cs2/index.php?page=3x3x3/cfop/f2l/f2lRubiks Cube Theory: Commutatorsbadmephisto2008-01-22 | In this video I teach you about commutators, which are sets of moves that only change very small parts of the cube. All of these things are intuitive and derivable, and there are no mentions of algorithms. After understanding this video, you will most likely be able to intuitively solve the entire rubik's cube :)
-----------------------------------------
JUST TO CLARIFY:
I don't expect anyone to understand in 10 minutes what took me 2 weeks to understand. The aim of this video was to get you interested, and hopefully give you a quick overview of what is possible. As long as you understand the general concept of commutators and how they work, my task is done and I'm happy :)
-----------------------------------------
At last I decided to make a Beginner's Method tutorial. This will teach you how to solve a Rubik's cube if you are an absolute beginner.
I teach a Beginner's method variation that is in my opinion fast and simple, but more importantly you will have a very easy transition into the advanced and popular Fridrich Method.
The version I teach can be viewed on Joel's awesome site:
http://solvethecube.110mb.com/index.php?location=simple_solution
In This video:
-Inserting middle edges
-Edge orientation
-Corner orientation
-Corner permutation
Clarifications for this video:
-in edge orientation instead of (F U R U' R' F') you can use a very similar looking algorithm to the opposite edge orienting one, (f R U R' U' f'). This one instead orients the Back and Left edge. f is a double layer turn. See notation:
http://solvethecube.110mb.com/index.php?location=notationHow to solve the Rubiks Cube: Beginners Method [part 1/3]badmephisto2008-01-07 | part 2/3 link: http://www.youtube.com/watch?v=fJw9kWkMnYg
At last I decided to make a Beginner's Method tutorial. This will teach you how to solve a Rubik's cube if you are an absolute beginner.
I teach a Beginner's method variation that is in my opinion fast and simple, but more importantly you will have a very easy transition into the advanced and popular Fridrich Method.
The version I teach can be viewed on Joel's awesome site:
http://solvethecube.110mb.com/index.php?location=simple_solution
In this video:
-Introduction
-The cube
-Notation
-Cross
-Inserting corners
Clarifications for this video:
-none as of yetEvolving types of motion in a simple organismbadmephisto2008-01-05 | I wrote a program that would try to simulate a small spring based organism, and then try and make it learn to walk, all by itself, simply by trying different things to first find a set of possible motions, and then refining each of those motions to perfect it. I then take a result of 2 days of computation and analyze it at the end.
The green bars on the left are more for debugging. Basically they show where and when the spring muscles of the organism contract, and how much they contract. Black and White is a strong contraction, gray is small contraction.My thought process while solving the cubebadmephisto2007-12-28 | I scramble the cube and solve it, and provide insights into what goes through my head while i do so. Some tips are also spread around the video.
This is a very experimental video that deals with some pretty advanced stuff, and I don't go exactly slow always - it is meant for people with averages around 20-40 seconds.
I don't have a slightest clue if this will be helpful to anyone at all, so I welcome any comments, even bad ones, as always, as long as they are constructive. I do not take them personally, i just want to become a better teacher :)How to become a Speedcuberbadmephisto2007-12-16 | A collection of introductions to all the most important things you will want to know if you want to become
a speedcuber. If you are a beginner, there will most likely be things you will not understand just yet,
that's ok, dont freak out :) Your time will come, just follow down the following list of things to learn,
and you will be speedcubing in no time.
Glossary for Rubik's cube terms:
http://cubefreak.net/glossary.html4 Seasons animationbadmephisto2007-12-13 | My attempt at creating a short animation of a tree through the 4 seasons - Made in Python, using the Pygame library for fancy graphics.Riding the exponential: Me solving the cubebadmephisto2007-10-02 | Brief history of my cube times and progress. My current solves are at the end. They represent my current times quite well, as I am just crossing the 20 second boundary.
this came as a reply to quite a few requests from people that wanted to see me solve the cube. Instead of creating a boring solve video I decided to spice it up a little, so hopefully you guys will like it.3D engine from scratchbadmephisto2007-09-06 | This is a simple 3D engine I put together... It was made from scratch - so i did all the math for it myself - the projection matrices, rotation transformations, vector classes etc. Only API used were to draw lines/points/polygons in 2D on screen, using python (pygame library)Tips/Tricks for learning OLL/PLLbadmephisto2007-08-28 | !!!IMPORTANT!!! This video is quite old. I do not use cubewhiz OLL's anymore. Check my OLL video instead. All the other tricks/tips still apply though.
---------------
A collection of (hopefully) useful Tips/Tricks for OLL/PLL. How just by knowing one algorithm and its inverse, you can get 3 more OLL's for free and more stuff like that. I go a little bit over the memorization techniques that I use as well.
NOTE one thing i forgot to mention, algorithms 9 and 10 in PLL's are almost exactly the same thing, with (R U R' F') executed in the beginning or the end.47 Minutes of Joybadmephisto2007-07-13 | Cubing session at 2AM :)Pedestrians Walking - Crowd Simulationbadmephisto2007-04-14 | A simulation of a walking crowd that I made. Each agent generates a decaying exponential potential function which other agents respond to, and try to avoid.
The code, (very roughly) is at
http://pastebin.com/meQcwfWw I've worked on it since then a bit so it's slightly different but the ideas are there