Making A Cypress Trestle Table For THE CHOSEN TV Series (Part 1 No Voice Over) Andy Rawls (ar_txwoodcraft) 2024-10-15 | Making A Cypress Trestle Table For THE CHOSEN TV Series (Part 1 No Voice Over)
Our Most Challenging Build To Date (Sunburst Veneer Table in Texas Pecan) Andy Rawls 2022-11-22 | Save up to 50% on your SimpliSafe system. Visit simplisafe.com/andyrawls to customize yours! Try SimpliSafe risk-free. If you don't love it, return it for a full refund within 60 days.Check out the edge banding here: youtu.be/0Sw-n9wGSjkChaptersIntro 0:00Table Base Frame 0:05Cutting Veneers 13:24Table Top Substrate 19:05Veneer Layout 20:25Mistakes Made 20:14Laying Up Veneer 24:03Table Base 28:59Finished Table 33:15Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Bending Wood // No Steam, Bent Laminations or Kerf Cuts...This Is Something Different Andy Rawls 2022-11-18 | In this video I'm experimenting with a different way to bend wood. The idea for this occurred when I was working on banding the edge of an ellipse conference table. The technique incorporates 3 layers of thin wood with the grain alternating between layers. It took a few attempts but worked great once I got it figured out.Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
97 Year Old Bandsaw Cutting .090 Thick Veneers (Vintage Oliver Bandsaw) Andy Rawls 2022-11-08 | In this video I'm giving an overview of my 1925 no. 35 Oliver Bandsaw. It's a 36" bandsaw capable of resawing over 16" wide veneers. It was purchased in 1925 by Frank E. Jones Machinery Co. in Los Angelos, CA. and later used by Ed Friedrich Inc. in San Antonia, TX. I restored this bandsaw several years ago, I've linked that series below. We're using the saw to cut bug veneers for a radial book matched table. Also, in the video we're making some updates to the new veneer table. Thanks for tuning in!Chapters0:00 Intro0:50 History of the Oliver Bandsaw2:52 Tour of the Oliver Bandsaw12:49 Big Resaw!21:52 Update to the Veneer TablePatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
5 Years Later...Repairing the Best Sawhorses Period Andy Rawls 2022-10-29 | McCurley Table: andyrawls.com/collections/furniture-1/products/mccurleytableSawhorse Build Video: youtu.be/NuO5HOJFA-cIn this video we're finishing up the joinery on the McCurley table. You'll see out process for making draw bore mortise and tenon joints. Next, I've got to repair my sawhorses because of a poorly made mortise and tenon joint. But I still stand behind the statement "these are the best sawhorses period"! Finally, I'm introducing the next big project build. Chapters0:00 Intro0:07 Draw Bore Mortise and Tenon Joint6:00 Table overview7:24 Repairing my sawhorses13:43 New ProjectPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Making Use of a Gnarly Mesquite Burl From South Texas - Bed Build Andy Rawls 2022-10-21 | In this video we're taking a look at a recent bed build from mesquite. I'm highlighting the bed hardware and how we installed it. We're also following up on the recent lectern we showcased in a previous video. Finally, we're starting a new dining table in rift white oak. McCurly Table: andyrawls.com/collections/furniture-1/products/mccurleytableMcCurly Table Build Video: youtu.be/IKmWDfpj1dc Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Large Workbench Thats Perfectly Flat // Ultimate Veneer Pressing Setup Andy Rawls 2022-10-17 | Save up to 40% on your SimpliSafe system. Visit https://SimpliSafe.com/andyrawls to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.This table was built to provide a large surface for pressing veneer panels. The table can fit a 60" x 120" panel or table top. It also doubles as large assembly table or workbench for the shop. We used torsion box construction to help obtain a very flat work surface for veneering. The table is adjustable sing leg levelers. Leg levelers I used: amzn.to/3zaz0p9Hardware for leg levelers: amzn.to/3ggC8sP Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
$100 Handplane Fixes Issues Created by a $22,000 Machine... Andy Rawls 2022-10-06 | In this episode we're working on a custom lectern and a very large veneer table for the shop. We'll cutting veneers, fixing problems caused by my CNC, and I'll show a cool side project I made for my good buddy in the Air Force.Chapters0:00 Intro0:05 Cutting Veneers1:05 Update on the channel2:46 Lectern dados14:15 Veneer Table17:15 Air Force Sign-----------------------------------------------------------------------------------------------------------Merchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
3 YEARS OF WORK and Now We Go Camping!! Andy Rawls 2022-09-16 | Save 20% on your SimpliSafe security system when you sign up for an Interactive Monitoring plan and get your first month FREE. Visit https://SimpliSafe.com/andyrawls to learn more!Greenlight Camper on Instagram: instagram.com/greenlightcamperCheck Out AirstreamU and get 40% off with Rawls40: airstreamu.comChapterIntro 0:00A Look Back 1:22First Trip 4:30Visit Window Trim/AirstreamU 11:555 Things I Wold Do Different 14:39Next Big Project 21:27Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Airstream Dinette Table, Bent Lamination Shelf, Curtains(Airstream Argosy Restoration Ep. 29) Andy Rawls 2022-08-25 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days.Get your curtains here: bit.ly/3QWtyNhFollow Along on our Adventures! instagram.com/greenlightcamper?igshid=YmMyMTA2M2Y=Chapters0:00 Intro2:17 Bent Laminations Shelf14:01 Building the Dinette Table25:26 CurtainsPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Very Large Waterfall Table From Urban Texas Pecan (Part 2) Andy Rawls 2022-08-20 | Total Boat ProductsHigh Performance Epoxy: totalboat.com/product/high-performance-21-epoxy-kitsTotalFair: totalboat.com/product/totalfairThickener: totalboat.com/product/silica-thickenerChapter0:00 Intro3:00 Dry Fitting3:38 Laying up Maple veneer4:30 Another Big Mistake!6:07 Cutting pockets for steel7:30 Another Dry Fit10:37 Cutting Pecan Veneer13:48 Cutting Miters18:27 Final Glue Up21:46 Hand planing edges23:37 Paint Prep26:06 Painting28:07 Outro29:35 Finished PicturesPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
First Trip is in a Week But We Have PROBLEMS! (Airstream Argosy Restoration Ep. 28) Andy Rawls 2022-08-08 | Check out the power washer here:amzn.to/3d9pZnLPatreon: patreon.com/andyrawlsChapters0:00 Intro1:21 Fixing the Door8:06 Cleaning the Airstream10:06 Installing a Cork Wall13:56 Building the Bathroom Door19:07 Bent Lamination Shelf for Dinette28:15 Tow Vehicle Issues30:08 Overview of Work Done33:09 Outro-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Very Large Waterfall Table From Urban Texas Pecan (Part 1) Andy Rawls 2022-08-01 | Save 20% on your system and your first month is free when yo sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more!Chapters0:00 Intro1:57 Table Blanks4:35 CNC the curved profile and miter6:47 Making skeleton frame7:36 Glueing up frame11:46 MDF problems12:25 Cutting Miter Splines12:44 Test fitting the frame14:20 Glueing on Bendy board16:25 More Problems!17:00 Surfacing the frame18:36 Dialing in the miter fit20:05 Fixing the problems22:15 Outro/Part 2 sneak peek!Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Dovetailed Bench // Using Soap As A Finish Andy Rawls 2022-06-22 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more!If you want to learn more about the soap finish go here: popularwoodworking.com/finishing/soap-making-clean-finish-2ChaptersIntro 0:00Processing a slab 0:10Jointing Boards 1:35Planning Boards 2:19Dovetail Trick 2:35Dovetail Layout 3:26Cutting Dovetails 4:05Transferring For Pins 7:35Cutting Pins 8:45Bottom Shelf 12:04Sliding Dovetail 13:35Glue Up 14:45Handplane Clean up 15:08Center Divider Install 16:06Soap Finish 17:06Finished Bench 18:05Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Moisture Meters, Jointing Boards Wider Than Jointer, Waterfalls and Nakashima Table Andy Rawls 2022-06-09 | Old Nakashima Table Build: youtu.be/zFuoQ9KfVMkEnd Grain Table Build: youtu.be/4CZIU5MQ2_4Berdoll Sawmill: instagram.com/berdollsawmillChapters0:00 Intro0:20 Cabinet Job1:31 Nakashima Table2:30 Jointing Board Wider Than Jointer8:11 Waterfall Table11:03 Moisture Content/Meter16:52 Nakashima Table18:03 Mesquite Bed Build19:13 OutroPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Its Almost Done! Last Details on Shower and Painting Cabinets (Airstream Argosy Restoration Ep. 27) Andy Rawls 2022-05-26 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more!Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Handcrafted 10 Shaker Bench in Curley Pecan Andy Rawls 2022-05-12 | Check out the table build here: youtu.be/2sNSkEiW8BMCheck out Philip Morley's work here: philipmorleyfurniture.comChapters0:00 Intro0:10 Cutting Out Base Supports0:55 Banding Base Supports2:31 Flush-trimming the banding4:14 Resawing veneers5:47 Edge Jointing Veneers8:53 Glueing Up Veneers11:27 Joinery14:52 Glue Up16:45 Outro20:53 Finished PicturesGlue Roller I use: amzn.to/3N819S7Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Live Edge Trestle Table in Curly Pecan Andy Rawls 2022-04-28 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more!ChaptersIntro 0:00Live Edge Slab Layout 0:05Edge Joint the Slabs (Jointer) 1:48Edge Joint the Slabs (Hand Plane) 5:05Live Edge Glue Up 8:44Table Base Joinery 12:54Pre-finishing Part 16:46Base Glue Up 17:13Through Tenon 17:55Sanding Live Edge Slab 18:36Finishing Live Edge Slab 20:05Outro/Finished Pictures 26:55Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Pedestal Base // Mortise and Tenon Drawbore // Round Dining Table Andy Rawls 2022-04-22 | You can order this table here: andyrawls.com/collections/furniture-1/products/mccurleytableCheck out the older build here: youtu.be/IKmWDfpj1dcPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Tree to Lumber with a Chainsaw Mill // Oak Wilt Is Killing My Trees Andy Rawls 2022-04-11 | Head to getsunday.com/andyrawls to check out Sunday and get 20% off! #sundayparter #sunday #lawncarePatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Carving A Canoe For My Son Andy Rawls 2022-04-04 | Thanks for tuning in! This toy canoe is hand carved from a block of cypress wood. I used walnut to carve out the seats. Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
DIY Airstream Shower Pt. 2 / Vanity Build / TPM Sensors (Airstream Argosy Restoration Ep. 26) Andy Rawls 2022-03-28 | Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit https://SimpliSafe.com/andyrawls to learn more!Total Boat Shower SuppliesEpoxy Resin: totalboat.com/product/high-performance-21-epoxy-kits6 oz Fiberglass: totalboat.com/product/6-oz-fiberglass-clothFairing Compound/ Filler: totalboat.com/product/totalfairTotalSeal: totalboat.com/product/sealETrailer Products I've used:(In This VIdeo) TPM Sensor: etrailer.com/TPMS-Sensor/TST/TST-507-RV-4-C.html?etam=a0015New Wheels: etrailer.com/Trailer-Tires-and-Wheels/Dexstar/AM20514.html?etam=a0015New Tires: etrailer.com/Trailer-Tires-and-Wheels/Kenda/AM10303.html? etam=a0015Baby Moons: etrailer.com/p-PX1307SS.html?etam=a0015Water Heater - etrailer.com/RV-Water-Heaters/Atwood/AT96163.html?etam=a0015Water Pump - etrailer.com/RV-Fresh-Water/HydroMax/P25201.html?etam=a0015Puck Lights - etrailer.com/RV-Lighting/Command-Electronics/CE29FR.html?etam=a0015Switches - etrailer.com/Accessories-and-Parts/JR-Products/37213395.html?etam=a0015Fantastic Vent - etrailer.com/RV-Vents-and-Fans/Fantastic-Vent/FV801200.html?etam=a0015Toilet: etrailer.com/RV-Toilets/Dometic/DOM29FR.html?etam=a0015Camera: etrailer.com/RV-Camera-System/Furrion/FCE48TASL-07.html?etam=a0015Chapters:0:00 Intro1:17 Fitting Shower Walls3:10 Bathroom Walls9:29 Installing the Shower17:33 Bathroom Vanity20:33 Plumbing the Shower23:40 TPM SensorsPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building an Heirloom Sleigh Bed In Texas Pecan | Curved Panel Work Andy Rawls 2022-02-24 | Thanks to Hone for sponsoring this video! Go to hone http://honehealth.com/AndyRawls to get your at home assessment and doctor consultation for only $45.Roctech CNC: roctechusacnc.comChapters:0:00 Intro0:05 Making the Bed Post2:25 Mortise Work3:30 Cutting Tenons5:39 Fitting Tenons6:18 Frame Assembly9:08 Very Complicated Vertical Divider12:56 Milling Panels From Slab13:53 Mistake!15:25 CNC curved panels18:05 Shaping Curve Vertical Divider19:54 Fitting Curved Panels23:33 Adding The Splines26:05 Panel Test Fit27:57 Glue Up28:45 Finish 29:47 Finished BedPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
DIY Airstream Shower Pt. 1 / Water Filter / More Plumbing (Airstream Argosy Restoration Ep. 25) Andy Rawls 2022-02-15 | Save 20% on your SimpliSafe security system when you sign up for an Interactive Monitoring plan and get your first month free. Visit simplisafe.com/andyrawls to learn more!TotalBoat provided all the fiberglassing supplies: totalboat.comAcuva Water Filter: acuvatech.com/product/acuva-arrowmax-1-0Cutting Boards: andyrawls.com/collections/home-goods-1Merchandise: bunkerbranding.com/collections/andy-rawlsChapters:Intro 0:00Lifting Column 0:05Intro 0:37Water Filter 3:08Shower Pan Build 7:25Shower Plumbing 11:13Fiberglassing the shower pan 16:25Shower mock up 26:35Outro 28:26Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt #AirstreamRenovation
Building A Table For Matt Carrikers New Home // The Abandoned Mansion Dining Table Andy Rawls 2022-01-25 | Save 20% on your SimpliSafe security system and your first month is free when you sign up for Interactive Monitoring. Visit https://SimpliSafe.com/andyrawlsChapterIntro 0:00Milling Boards for Table Top 0:10Handplane Lesson 1:26Table Top Glue Up 5:14Milling Base Parts 6:03Sanding Top 7:06Final Glue Up Top 9:06Overview Of Work Done 12:05Cutting Circle Table Top 15:05Floating Tenon Joinery 17:54Base Glue up 12:13Finish 22:24Delivery 24:24Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Processing A Massive Pecan Slab // Another Cannon Pattern To Build // Argosy Update Andy Rawls 2022-01-15 | In this episode I'm showing our process for sanding a large table top on the wide belt sander. I'll be giving na update on the Argosy, I think I have the shower figured out! And, I've got another cannon pattern to make for the Alamo. 4 Pound cannon video here: youtu.be/T3nJpMKWcIAThe Chosen Table Build: youtu.be/5BGShVOu3cQPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Part 2: FINAL VIDEO! Hired By The Alamo To Build A Naval Cannon Carriage (Part 2) Andy Rawls 2022-01-08 | Alamo on Facebook: facebook.com/OfficialAlamoGo Follow the Alamo on Instagram: instagram.com/officialalamo/?hl=enGo Subscribe to the Alamo on YouTube: youtube.com/user/OfficialAlamoCheck out Jason’s work here: instagram.com/txheritage?utm_medium=copy_linkA big thanks to Old West Iron, go check their extensive selection of hardware here: oldwestiron.comPatreon: patreon.com/andyrawlsChapters0:00 Intro0:05 Shooting a Mini Cannon1:05 Intro3:22 Jason Thigpen: Forging the Straps8:34 Fitting the cannon to the carriage11:08 Carriage Glue-up12:20 Installing trunnion straps (PROBLEMS)15:21 Installing the wedge block19:28 Cannon Unveiling -----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Part 1: Hired By The Alamo To Build A Naval Cannon Carriage Andy Rawls 2022-01-02 | Alamo on Facebook: facebook.com/OfficialAlamoGo Follow the Alamo on Instagram: instagram.com/officialalamo/?hl=enGo Subscribe to the Alamo on YouTube: youtube.com/user/OfficialAlamoA big thanks to Old West Iron, go check their extensive selection of hardware here: oldwestiron.comPatreon: patreon.com/andyrawlsChapters0:00 Intro/Project Overview2:46 Lumber Layout4:07 Cutting Out Parts4:55 Handsaw Issues8:35 Making Splines10:45 Cutting Dados for Axles12:32 Drilling Holes for Hardware14:06 Turning Axles15:48 Drilling Holes on Lathe (more hardware)20:09 Hand Planning Surfaces (jack plane)20:55 Drawknife Lesson22:35 Finish23:21 Making The Wheels28:05 Hardware Overview (Old West Iron)29:18 Outro/Part 2 Sneak Peak-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Installing Solar Panels // Mounting The Fridge // Help Needed! (Airstream Argosy Restoration Ep. 24) Andy Rawls 2021-12-14 | Save 40% or more on your SimpliSafe security system during their holiday sale! Visit simplisafe.com/andyrawls to learn more!Check out the video where Nate installed my batteries and solar: youtu.be/JMqtVBN26NQChapters 0:00 Intro3:35 Solar6:40 Vent Pipe Cover13:00 Riveting Furniture 14:15 Installing Sink/Drain16:10 Fridge Framing/Face Frame19:45 Troubleshooting Tank Level Guages23:49 Installing Fridge26:47 Shower Help Needed!Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt #AirstreamRenovation
Texas Ash Round Table // Saying No To The Live Edge... (Repost) Andy Rawls 2021-12-03 | Chapters0:00 Intro0:05 Cutting Out The Circle (Bye Live Edge)3:18 Making Bent Laminations5:10 Bending The Aprons6:55 Cutting Curved Apron To Size8:28 Sliding Dovetail Joinery12:16 Hand Carved Leg Detail15:36 Glue-Up16:36 Table Hold Downs (Buttons)19:15 Finish20:05 Finished Shots (Outro)Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Kitchen Countertop // More Walls! // Framing for the Pantry (Airstream Argosy Restoration Ep. 23) Andy Rawls 2021-11-23 | Save 50% or more on your SimpliSafe security system during their biggest sale of the year! Visit https://SimpliSafe.com/andyrawls to learn more!Get your metal supplies here: rotometals.comChaptersIntro 0:00Pantry Setup 3:05Scribing Pantry Wall 4:35Pantry Wall Install 7:14Countertop Frame 8:45Making Zinc Countertop 11:36Glued it the Workbench! 13:44Sanding Metal on Wide Belt (Bad Idea!) 14:48Sink Cutout 15:47Bending Edge 17:45Final Sanding 20:45Outro 22:15Patreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Making A Giant Tree Swing For My Kids Complete with Planter Box Andy Rawls 2021-11-22 | EcoFlow is running an incredible holiday sale right now with up to $700 off – their power stations are a great gift for friends and family alike. Check out them out at my links here: bit.ly/30DvWmQ or amzn.to/3nErjlqPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#EcoFlow #AndyRawls #GoAndMakeIt
Texas Ash End Grain Table (Part2) - Building A Round Table Is Harder Than You Might Think! Andy Rawls 2021-11-10 | Thanks to Hone for sponsoring this video! Go to honehealth.com/andyrawls to get your at home assessment and doctor consultation for only $45Chapters0:00 Intro0:05 Milling Curved Aprons1:15 Sliding Dovetail Jig2:15 Cutting Sliding Dovetials9:35 CNC work on table top10:55 Sanding Table Top Wide Belt13:37 Hand Tool Work Sliding Dovetails14:25 Cutting Sliding Dovetail in Leg16:35 Bridle Joint on Mortiser19:06 Carving Leg Profile 12:36 Leg Taper on Bandsaw26:55 Table Base Glue-up29:07 Final Radius cut on CNC29:40 Table Hold Down Mortise31:38 Final Shaping of Leg32:25 Finish33:16 OutroPatreon: patreon.com/andyrawlsThe CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
I Hired An Apprentice (Professional Woodworking Shop) Andy Rawls 2021-11-03 | Check out the best flannels out there at http://www.goMuskOx.com & treat yourself to 15% off by using the discount code RAWLS15 at checkout. They've got lots of great outdoor gear above and beyond flannels!Chapters0:00 Intro4:15 Hand Plane Lesson7:24 Meet Robert9:16 Laying Out Matt Carriker's Table11:36 Oliver Bandsaw Overview13:54 Outro/Upcoming VideosPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Texas Ash End Grain Table (Part 1) - Tricky 38 Diameter Bent Lamination Andy Rawls 2021-10-23 | Free whole turkey in first box click: bchrbox.co/AndyRawlsIncludes free shipping! Tip: Make sure to enter your email to access this deal! ButcherBox gives customers access to high quality meat at an affordable price, and you never pay for shipping. With ButcherBox, you get 100% grass-fed & grass-finished beef, free range organic chicken, heritage breed pork and more delivered to your doorstep, saving you time and money. No matter where you live, every family now has access to high quality cuts of meat at the most affordable prices! **Sponsored by ButcherBoxPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Installing The AC // Plumbing // Framing for the Cabinets (Airstream Argosy Restoration Ep. 22) Andy Rawls 2021-10-16 | The newest member of the Delta family, the Delta Mini, is a great addition to your tool kit when you need a smaller power source. Head to bit.ly/3zk5IS2 to check it out!Chapters0:00 Intro2:00 AC Install5:54 EcoFlow Power Station8:26 Drain and Vent Pipes10:47 Suburban Furnace/Ducting14:47 Cabinet Framing18:57 Sketchy Scorpion19:47 Cabinet Framing Install Bunk Area25:06 Cabinet Framing Install Kitchen Area26:55 Shower Plumbing Issues29:25 OutroPatreon: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#EcoFlow #AndyRawls #GoAndMakeIt
(New Format) Shipping A Display Case to Slovakia! // Dust Collection Repair // Record Console/Desk Andy Rawls 2021-10-02 | Patreon: patreon.com/andyrawlsChapters:0:00 Intro0:05 Golf Ball Display Case Shelves (CNC)1:46 CNC dust collection4:35 Corner Chisel - Golf Ball Display Case Sides6:15 Golf Ball Display Case doors8:15 Fitting the doors12:56 Oil Finish on the Record Desk15:00 Golf Ball Display Case Shiplap18:29 Golf Ball Display Case Assembly21:35 Outro23:25 Desk and Golf Ball Case -----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Surfacing a Giant Ash End Grain Slab on the CNC Andy Rawls 2021-09-24 | Check out the best flannels out there at http://www.goMuskOx.com & treat yourself to 15% off by using the discount code RAWLS15 at checkout. They've got lots of great outdoor gear above and beyond flannels! NEW Patreon Page: patreon.com/andyrawls-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building A Record Console/Desk (CNC Fail) (Dealing with Mistakes in the Shop) Andy Rawls 2021-09-17 | Take 20% off your SimpliSafe security system AND your first month is free when you sign up for the Interactive Monitoring service. Visit https://SimpliSafe.com/andyrawls to learn more!Chapters0:00 Intro/Up coming projects1:08 Record console/desk overview2:55 Side Frames5:49 MISTAKE #1 - CNC Fail7:28 CNC radius trim10:04 SimpliSafe 20% OFF!!!! 12:37 Drawer Frame Construction14:35 SOSS hinges16:37 MISTAKE #2 - SOSS hinges18:56 Glue-Up19:58 Sliding dovetail (Drawer framing)22:15 MISTAKE #3 - CNC Fail24:16 Fixing Mistake #325:59 Making grilled doors 29:37 Finished Piece Overview31:24 Big Changes Happening-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt Become a Patron: patreon.com/andyrawls
Installing a Deadbolt // Exterior Hatch Doors // Walls Part 2 (Airstream Argosy Restoration Ep. 21) Andy Rawls 2021-09-02 | Thanks to Hone for sponsoring this video. Head to honehealth.com/andyrawls to learn more and receive 25% off your at-home hormone assessment.TotalBoat VarnishesSealer: totalboat.com/product/wood-sealer-varnish-primerGleam Varnish: totalboat.com/product/gleamVarnish Thinner: totalboat.com/product/special-brushing-thinner-100ETrailer Products I've used:New Wheels: etrailer.com/Trailer-Tires-and-Wheels/Dexstar/AM20514.html?etam=a0015New Tires: etrailer.com/Trailer-Tires-and-Wheels/Kenda/AM10303.html? etam=a0015Baby Moons: etrailer.com/p-PX1307SS.html?etam=a0015Water Heater - etrailer.com/RV-Water-Heaters/Atwood/AT96163.html?etam=a0015Water Pump - etrailer.com/RV-Fresh-Water/HydroMax/P25201.html?etam=a0015Puck Lights - etrailer.com/RV-Lighting/Command-Electronics/CE29FR.html?etam=a0015Switches - etrailer.com/Accessories-and-Parts/JR-Products/37213395.html?etam=a0015Fantastic Vent - etrailer.com/RV-Vents-and-Fans/Fantastic-Vent/FV801200.html?etam=a0015Toilet: etrailer.com/RV-Toilets/Dometic/DOM29FR.html?etam=a0015Camera: etrailer.com/RV-Camera-System/Furrion/FCE48TASL-07.html?etam=a0015Chapters0:00 Intro1:06 Installing Deadbolt8:17 Hone (Support from Sponsor)10:34 Exterior Hatch Install15:15 Applying Varnish Walls18:17 Wallpapering Walls20:35 Installing Walls24:56 Wiring/Outro-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Making A Crossbow from an Old Bourbon Barrel Andy Rawls 2021-08-16 | In this video I'm using two old barrel staves to make a crossbow for my kids. Chapters:0:00 Intro1:12 Taking Apart Barrel2:10 Shaping The Bow4:05 Cutting Mortise5:18 Assembly6:08 Making Bolt Track7:44 Crossbow Trigger13:42 Outro15:38 Test Shooting with Kids-----------------------------------------------------------------------------------------------------------The CNC I use - RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Custom Interior Wood Walls Using American Red Elm (Airstream Argosy Restoration Ep. 20) Andy Rawls 2021-07-30 | Visit http://simplisafe.com/ANDYRAWLS to check out SimpliSafe's award-winning home security that keeps your home safe around the clock! It's really reliable, easy to use, and there are no contracts.Veneer Supplies I use:Veneer Supplier - certainlywood.comPump - veneersupplies.com/products/Vacuum-Pump---35-CFM-120v-AC.htmlBag - veneersupplies.com/products/VS-Elite-Polyurethane-Vacuum-Bag-4-x-12.htmlBreather Mesh - veneersupplies.com/products/Vacuum-Breather-MeshNet.htmlGlue Spreader - amzn.to/3xjfItIChaptersIntro 0:00CNC Wall Curve 3:29Test Fit Wall 6:35Veneer Work 7:36Making Wall Core 17:22Final Test Fit 18:28Outro 22:36-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Slabbing The Sycamore Log // Argosy Update Andy Rawls 2021-07-23 | Go to decked.com/andyrawls to get free shipping on your Decked Drawer SystemTexas Urban Sawmill: http://txurbansawmill.comDevin on YouTube: youtube.com/c/RefinedelementsFurnitureDevin on Instagram: instagram.com/txurbansawmill-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Making A Wooden Cannon for the Alamo (The Alamo Project Part 1) Andy Rawls 2021-07-15 | Use my offer code, ANDYRAWLS, to get a 60-day free trial. Go to https://www.ShipStation.com, click on the microphone at the top of the page, and type in ANDYRAWLS.Alamo on Facebook: facebook.com/OfficialAlamoGo Follow the Alamo on Instagram: instagram.com/officialalamo/?hl=enGo Subscribe to the Alamo on YouTube: youtube.com/user/OfficialAlamoA huge thanks to The Alamo for letting be apart of such an amazing project! Building a wooden cannon pattern was so rewarding and challenging. -----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Repairing a Springfield 1903 Stock Andy Rawls 2021-06-30 | TotalBoat High Performance Epoxy: totalboat.com/product/high-performance-21-epoxy-resinTotalBoat Silica Thickener: totalboat.com/product/silica-thickenerSupport the channel and pre-order a cutting board here: andyrawls.com/collections/home-goods-1----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Building “The Chosen” Trestle Table // Old School Joinery // Traditional Woodworking (Re-Upload) Andy Rawls 2021-06-23 | I'm excited to be working with The Chosen TV series! This table will be featured in Season 2 Episode 6 check it out here: youtu.be/nhMAk_KK7ukI previously posted a two part in depth video series on this table build links are below. I wanted to re-upload so my viewers could see a shorter version without commentary and so I could direct viewers to the episode its featured in.Part 1: youtu.be/H12ryFqGWL0Part 2: youtu.be/iCBuvWV6oDE-----------------------------------------------------------------------------------------------------------The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTrMy Amazon Store | amazon.com/shop/emilyr4life//Social Media:Instagram | instagram.com/ar_txwoodcraft/?hl=enFacebook | facebook.com/andyrawlswoodcraftBlog | goandmakeit.comPintrest | pinterest.com/andyrawlsfinetexaswoodcraftThanks for tuning in!Andy Rawls Website | andyrawls.com#AndyRawls #GoAndMakeIt
Curved Woodworking // Making the Bench Seating for my Argosy Airstream Andy Rawls 2021-06-11 | Use my offer code, ANDYRAWLS, to get a 60-day free trial. Go to shipstation.com, click on the microphone at the top of the page, and type in ANDYRAWLSPre Order your cutting board here: andyrawls.com/collections/home-goods-1----------------------------------------------------------------------------------------------------------- The CNC I use RoctechCNC: roctechusacnc.comMerchandise | http://bit.ly/2tXKoTr My Amazon Store | amazon.com/shop/emilyr4life //Social Media: Instagram | instagram.com/ar_txwoodcraft/?hl=en Facebook | facebook.com/andyrawlswoodcraft Blog | goandmakeit.com Pintrest | pinterest.com/andyrawlsfinetexaswoodcraft Thanks for tuning in! Andy Rawls Website | andyrawls.com #AndyRawls #GoAndMakeIt
Upgrading My Woodworking Shop With A 5x5 CNC Andy Rawls 2021-06-01 | Learn more about this machine at: roctechusacnc.com----------------------------------------------------------------------------------------------------------- Merchandise | http://bit.ly/2tXKoTr My Amazon Store | amazon.com/shop/emilyr4life The CNC I use RoctechCNC: roctechusacnc.com //Social Media: Instagram | instagram.com/ar_txwoodcraft/?hl=en Facebook | facebook.com/andyrawlswoodcraft Blog | goandmakeit.com Pintrest | pinterest.com/andyrawlsfinetexaswoodcraft Thanks for tuning in! Andy Rawls Website | andyrawls.com #AndyRawls #GoAndMakeIt
Dovetails inside a Mortise and Tenon Joint // Woodworking Joinery Andy Rawls 2021-05-13 | Check out the new hats here: bunkerbranding.com/pages/andy-rawlsA big thanks to Jeff over in Instagram for triggering the idea: instagram.com/geoffrey_ciao?igshid=el05uxa6npzx----------------------------------------------------------------------------------------------------------- Merchandise | http://bit.ly/2tXKoTr My Amazon Store | amazon.com/shop/emilyr4life //Social Media: Instagram | instagram.com/ar_txwoodcraft/?hl=en Facebook | facebook.com/andyrawlswoodcraft Blog | goandmakeit.com Pintrest | pinterest.com/andyrawlsfinetexaswoodcraft Thanks for tuning in! Andy Rawls Website | andyrawls.com #AndyRawls #GoAndMakeIt
New Wheels And Paint...Check Out The New COLOR! (Airstream Argosy Restoration Ep. 20) Andy Rawls 2021-05-03 | Visit http://simplisafe.com/andyrawls to check out SimpliSafe's award-winning home security that keeps your home safe around the clock! It's really reliable, easy to use, and there are no contracts.ETrailer Products I've used:New Wheels: etrailer.com/Trailer-Tires-and-Wheels/Dexstar/AM20514.html?etam=a0015New Tires: etrailer.com/Trailer-Tires-and-Wheels/Kenda/AM10303.html? etam=a0015Baby Moons: etrailer.com/p-PX1307SS.html?etam=a0015Water Heater - etrailer.com/RV-Water-Heaters/Atwood/AT96163.html?etam=a0015Water Pump - etrailer.com/RV-Fresh-Water/HydroMax/P25201.html?etam=a0015Puck Lights - etrailer.com/RV-Lighting/Command-Electronics/CE29FR.html?etam=a0015Switches - etrailer.com/Accessories-and-Parts/JR-Products/37213395.html?etam=a0015Fantastic Vent - etrailer.com/RV-Vents-and-Fans/Fantastic-Vent/FV801200.html?etam=a0015Toilet: etrailer.com/RV-Toilets/Dometic/DOM29FR.html?etam=a0015Camera: etrailer.com/RV-Camera-System/Furrion/FCE48TASL-07.html?etam=a0015TotalBoat Products:Primer: totalboat.com/product/totalprotectEpoxy Sealant: totalboat.com/product/thixo-flex-thick-flexible-epoxy-adhesiveChapterIntro 0:00Banana Wrap 0:14New Wheels: 1:42Paint Prep: 10:36Painting: 13:54Outro 25:19----------------------------------------------------------------------------------------------------------- Merchandise | http://bit.ly/2tXKoTr My Amazon Store | amazon.com/shop/emilyr4life //Social Media: Instagram | instagram.com/ar_txwoodcraft/?hl=en Facebook | facebook.com/andyrawlswoodcraft Blog | goandmakeit.com Pintrest | pinterest.com/andyrawlsfinetexaswoodcraft Thanks for tuning in! Andy Rawls Website | andyrawls.com #AndyRawls #GoAndMakeIt
Making Curved Table Legs Andy Rawls 2021-04-26 | See the finished table here: youtu.be/8E5TaY0lAT0Order the table here: andyrawls.com/collections/home-goods/products/biedermeier-table?variant=43502024841----------------------------------------------------------------------------------------------------------- Merchandise | http://bit.ly/2tXKoTr My Amazon Store | amazon.com/shop/emilyr4life //Social Media: Instagram | instagram.com/ar_txwoodcraft/?hl=en Facebook | facebook.com/andyrawlswoodcraft Blog | goandmakeit.com Pintrest | pinterest.com/andyrawlsfinetexaswoodcraft Thanks for tuning in! Andy Rawls Website | andyrawls.com #AndyRawls #GoAndMakeIt
