Now I'm not the IET so you can't take this as gospel.
However, if we look at what I think is the reasoning behind the regulations, I'm hoping you will see where I'm coming from.
I've also spent quite a lot of time researching this subject and using various sources, including an English teacher to analyse the sentence structure and wording of regulation 522.6.202, not to mention what I believe to be common sense, and I think I put forward a pretty strong case against the way that electricians are interpreting this regulation lately.
I also give a brief over view of Mary Wherry, the daughter of MP Jenny Tonge, who died back in 2004 and was speculated to be the reason for Part P's existence.
Mary was electrocuted after her husband put up a utensil rack that clipped a cable buried in the wall, which had not been run within the prescribed zone and had in fact deviated out of it by 5 degrees.
Had the cable been installed correctly, Mary might still be with us today.
As always please like - share - and subscribe to get these important messages out there, and don't forget to comment with your thoughts on the case that I have put forward.
Prescribed zones, chase depths and why I think most installers are not following the regulationsPure Electrical Training - by Adrian Davey2021-06-27 | In this video I talk through a huge bug bear of mine... Prescribed Zones and chasing depths!
Now I'm not the IET so you can't take this as gospel.
However, if we look at what I think is the reasoning behind the regulations, I'm hoping you will see where I'm coming from.
I've also spent quite a lot of time researching this subject and using various sources, including an English teacher to analyse the sentence structure and wording of regulation 522.6.202, not to mention what I believe to be common sense, and I think I put forward a pretty strong case against the way that electricians are interpreting this regulation lately.
I also give a brief over view of Mary Wherry, the daughter of MP Jenny Tonge, who died back in 2004 and was speculated to be the reason for Part P's existence.
Mary was electrocuted after her husband put up a utensil rack that clipped a cable buried in the wall, which had not been run within the prescribed zone and had in fact deviated out of it by 5 degrees.
Had the cable been installed correctly, Mary might still be with us today.
As always please like - share - and subscribe to get these important messages out there, and don't forget to comment with your thoughts on the case that I have put forward.
Take care
AdrianVerify R1 + R2 testing of a radial lighting circuit - covers fault finding and write-up. Part 1 of 3Pure Electrical Training - by Adrian Davey2023-11-05 | Hello and welcome to Part 1 of this video series, by Adrian Davey from Pure Electrical Training.
In this video, we discuss the process of verifying R1 + R2 within a radial lighting circuit. I also explain the definition of R1 + R2, how to use test methods 1 and 2, and how to verify your results using the IET's on-site guide.
I then demonstrate fault-finding on this circuit and how to write up a report for the person ordering the work.
Remember, this video can contribute to your off-the-job training for apprenticeships or serve as part of your own CPD.
Please show your support by liking, sharing, and subscribing, so that everyone can benefit from this valuable content.
Thank you and take care.resistors in series part 3 of 3 - Calculating the current total using voltage drop over a resistorPure Electrical Training - by Adrian Davey2023-03-25 | Hello and welcome to the third and final part of this video on resistors in series by Adrian Davey from Pure Electrical training.
In this video, I show you how to find the current total within a circuit that does not contain the voltage total but does contain a voltage drop. I also give you a screenshot of the rules of series circuits and the method for your exam formula sheets, to aid you in revision.
In the following video, I will take you through resistors in parallel, where voltage stays the same and it's the current that changes.
I hope you like these videos and find them useful, and as always, please like, share, and subscribe so that everyone can benefit from them.
Take care, AdrianResistors in series part 1 of 3 - Why we need to know resistors in series and how we use it on-sitePure Electrical Training - by Adrian Davey2023-03-11 | Hello and welcome to this video on resistors in series within electrical circuits by Adian Davey from Pure Electrical Training.
This video is designed to help you with your electrical training to complete the 1st year science exam, and the aim of part one in this video series is to explain why you need to understand this content in your career as an electrician. It ties into how circuits work, and how you can prove that using your MFT to test those circuits and verify compliance with BS 7671.
As we move onto the second video, I will go through a couple of examples of series circuits to aid you in the exams.
I hope this video helps and am looking forward to moving on to resistors in parallel, as they always confuse people.
As always, please like, share, and subscribe so everyone can benefit from this content.
Take care, Adrianresistors in series part 2 of 3 - How to calculate your missing valuesPure Electrical Training - by Adrian Davey2023-03-11 | Hello and welcome to part 2 of this video on resistors in series. In the first video, I gave examples of why you need to know this information for your career as an electrician, which should help you remember the knowledge you are learning.
In this video, I show you how to use Ohm's law to calculate the unknown values within a series circuit and how the current stays the same throughout. This means we can use the current as our key to unlocking all the other values.
I hope this video helps, and in part 3 of this video series, I will go through the final example I show you at the end of this video and hopefully, you've got the hang of the method by then.
As always, please like, share, and subscribe, so that everyone can benefit from this content.
Take care
AdrianEarthing and bonding part 3 - Fault finding bonding and earthing conductorsPure Electrical Training - by Adrian Davey2023-01-22 | Hello and welcome to part 3 of this video series on earthing and bonding in this video, I will talk you through some basic faultfinding, as well as some hints and tips for your career moving forward and the AM2.
As always, please like share and subscribe to get these videos out there to help others who may be struggling.
Take care
AdrianReview of Contactum 6-way consumer unit with 100A main switch. SDD061MSPure Electrical Training - by Adrian Davey2023-01-08 | Hello and welcome to my very first review 🙌
Up first, is this Contactum 6-way board with 100A main switch.
Catalogue reference:SDD061MS
First impressions out of the box were very good and Contactum didn’t disappoint.
Please watch the review and let me know your thoughts, thank you.
Disclaimer: I have received no monetary reward or incentive to do this review.Have you fallen foul of a rogue trader? I have a solutionPure Electrical Training - by Adrian Davey2023-01-07 | Hello, My name is Adrian Davey and I've been an electrician since 2001. In that time I have seen the construction industry become reduced to what it is today and you know it's bad when new-build properties have a reputation for being the worst.
My defining moment was a 1-year-old new build that could have killed the family and three young daughters. Despite my best efforts as an ethical tradesperson and being a father myself, I could not get justice for this family and the estimated cost of putting right was over £20,000 for the electrics alone. The rest of the build was also in a bad way and this was not a cheap house!
We complained to everyone. The Competent Person scheme the electrician was registered with Building control Trading Standards The HSE No one was interested...
How can we live in a world where innocent people get ripped off and left to pick up the pieces?
Believe it or not, there are good tradespeople out there, just like there are good clients, but it's hard to find one because they are all registered with the same people, and this makes it hard for the good tradespeople to stand out from the rogue traders. Also, the current membership schemes will not remove incompetent paying trades from their books as they don't want to lose revenue, and there is nothing in place to protect innocent homeowners.
My idea is simple.
Find the best electricians, and support them to be the best they can be. As part of their membership, give them free business advice, training, CPD, and incentives to do the right job by giving them a share in a non-profit organisation that I want to create, with a no-claims discount for ensuring that they do their very best.
These are only ideas and I would welcome some more, including your experiences, but ultimately, something needs to change and what is currently out there is not working for anyone. Please get in touch with your stories and we can put those to the government to push for change, but we need your support to build the platform that will create this change.
There are good tradespeople out there and we need to make it easier to find them and we need to support people when things go wrong, as sometimes they do. It's how we resolve them that will make the difference.
Please visit my GoFundMe page to donate and find out how I intend to push for an industry-wide change.
Thank you and take care
AdrianWhy we need change in the electrical industry and my GoFundMe pagePure Electrical Training - by Adrian Davey2023-01-02 | This is video one, which is an introduction to the problems that I see in the electrical industry and ideas on how I believe we can change them.
My defining moment was in 2018 when I tried to report a new build property that was the most dangerous I have ever seen. The family was getting electric shocks off of the wetroom shower and the electrician told them it was only a small voltage.. 70V!
When I tried to report that electrician to the competent person scheme I soon realised that the system we currently have is made of cards and has no real substance. It's not real...
I complained to the competent person scheme, the HSE, Building control, and Trading Standards, but no one was interested and they all passed the buck.
That electrician got away scot-free, despite how close he came to killing someone...
Personally, I believe we need to start by building a competent person scheme that actually works, and I give you some of my ideas on how that could happen.
Starting with individual competence.
After all, how can you have a competent person scheme if the competence is attributed to a company, not an individual?
Surely, that devalues electricians as you don't need them to be registered...Earthing and bonding part 2: How to test continuity of protective conductorsPure Electrical Training - by Adrian Davey2022-12-24 | Hello and welcome to part 2 of this video on earthing and bonding conductors.
This part aims to teach you how to test the conductors, what parallel ways actually are, and why it's important to remove them.
Part 3 of this video will move on to fault finding and rectification, before talking you how to record the results in the AM2 or CG2391 inspection and testing qualification.Earthing and bonding part 1: what are main and equipotential bonding conductorsPure Electrical Training - by Adrian Davey2022-12-24 | Hello and welcome to this video on earthing and bonding part 1 of 3.
In this video, I talk you through a couple of regulations that you need to consider, the definitions you need to know, and how the equipotential system works by creating a faraday cage effect.
Part 2 of this video will talk you through testing continuity and using test method 2.
Part 3 covers fault finding.
As always, please like share, and subscribe so others can learn from these videos too.
Take care
AdrianBoiler wiring made easyPure Electrical Training - by Adrian Davey2022-12-06 | Hello and welcome to this video on Boiler wiring by Adrian Davey from Pure Electrical Training.
It's a bit of a rushed video as someone asked me for some help and I've been meaning to make a video on this subject for a while.
Hopefully, it helps in some way until I have the time to do it properly ...Understanding and recognising UK electrical earthing arrangements - inspection and testing & DesignPure Electrical Training - by Adrian Davey2022-11-05 | Hello and welcome to this video on earthing arrangements by Adrian Davey from Pure Electrical training.
In this video, I help you identify the three main earthing arrangements in the UK, and the types of cable used to supply them.
I then go on to discuss how you select the correct size earthing conductor and which regulations apply, as well as a handy table to save you from having to calculate the size using the adiabatic equation.
This video counts as CPD and off-the-job training.
As always, please like, share, and subscribe so that everyone can benefit from the information contained within.
Take care
AdrianBecome an electrician and get a gold card the easy way on the CG2346 experienced worker routePure Electrical Training - by Adrian Davey2022-08-19 | Anyone can achieve the equivalent of an apprenticeship standard with the City and Guilds 2346 experienced worker route, or the EAL equivalent.
All you need is an inspection and testing qualification, the regs qualification and an NVQ
A fully completed NVQ, which you can buy off of eBay!
Along with PDF's of IET, Hodder education, Trevor Lynsey, Brian Scadden publications, City and Guilds SmartScreen, Electracourse exam simulator, and all the exam questions and answers that you need.
If you want to know more, then please watch this video...
As always, please like share and subscribe.How to correctly terminate bonding straps - life hack. Also covers easy clamps from AM2Pure Electrical Training - by Adrian Davey2022-06-11 | Hello and welcome to my video on terminating bonding clamps. I've been meaning to make this video for a long time now and it keeps slipping to the bottom of the list.
In this video, I talk you through my top tips for ensuring a mechanically and electrically tight bonding connection, how to use and easy clamp, and some tips on what not to do.
I thought that I would quickly get it out this weekend, but as I was rushing, I messed up the aspect ratio and I apologise. When I get the chance, I'm going to reshoot this video and add in some other things that I should have spoken around.
I hope this video still comes in useful, which is why I've released it and apologise if it isn't up to my usual standard.
Take care
AdrianInspection and Testing - Ring final circuit figure of 8 explainedPure Electrical Training - by Adrian Davey2022-06-05 | Hello and welcome to the 2nd video in this series discussing the Ring Final Circuit, and in this video, we will be talking about the fabled figure of 8.
Why, it makes a difference and why it's so important to get right.
Don’t forget that if you are on an apprenticeship, you can log these videos as CPD towards your 20% off the job training.
I hope you have enjoyed watching and if you like this content and want to see more, then please like, share and subscribe to get this important knowledge out there, so that everyone can benefit.
I appreciate every single one of my subscribers and encourage you to love, care and take individual responsibility for this industry, so that our everyday world will be a much more positive place to be.
Take careInspection and Testing - End-to-end testing of a ring final circuit. AM2 CG2391Pure Electrical Training - by Adrian Davey2022-05-29 | Hello and welcome to another video by Adrian Davey from Pure Electric.
In this video, I will be talking you through the basics of end-to-end testing of Ring Final Circuit (RFC) conductors and linking this to fault finding, as the two are intrinsically linked.
You cannot fully understand testing, unless you also understand fault finding.
The next video in this series, will talk you through the fabled figure of 8 connection on a ring, why we do it, and why it is so important.
Thank you for watching and as always, if you want more of this content, then please like, share and subscribe to enable me to help others.
Take care
Adrianyour AM2 Facebook groupPure Electrical Training - by Adrian Davey2022-05-08 | I get a lot of people contact me regarding the AM2 trying to find information on it, so that they can prepare for the assessment. I also get some people contact me afterwards with feedback, some good, some not so good, so I would love it if you shared your experiences with me, so that we can improve the AM2 for everyone.
Please feel free to join the Facebook group, share your experiences with others within the group and invite people to join.
Ultimately, this group is there to support you, so please make the best use of it that you can.
I've already included a link to an AM2 video that NET did with Voltimum and the videos that I put together on YouTube.
I hope this helps in some way, as always like, share and subscribe to get these important messages out there.Fault finding on a Ring Final Circuit using R1+R2 & R1+RN, the only way to prove polarity AM2 AM2SPure Electrical Training - by Adrian Davey2022-04-10 | Hello and welcome to my video on Fault finding a ring final circuit using R1+R2 and R1+RN, which is the correct way to prove polarity.
In this video I talk you through testing end to ends on the ring to prove you have a ring to start with, how to check your r1 and rn are within tolerance, which would show you if you had a poor termination, before finally checking the r2 value if you have twin and earth, using the ratio of 2.5/1.5 = 1.67 times smaller.
I then show you why we connect into a figure of eight, and then create a table to show you how you can prove the fault, before removing the socket and how you can check polarity at the same time.
This will save you valuable time when you are fault finding in the AM2, or at work.
I hope this video is useful and as always, please like, share, and subscribe to get these important messages out there.
Take care
AdrianTransposition made easy video 4 - Electrical Science and principles 1st year examPure Electrical Training - by Adrian Davey2022-03-28 | This is video 4 in my transposition series, that quickly shows you some basic formula triangles to remember for the 1st year science and principles exam.Transposition made easy video 3 - Electrical Science and principles 1st year examPure Electrical Training - by Adrian Davey2022-03-27 | Welcome to the 3rd video in my transposition series. In this video, I briefly go through the resistivity formula to warm you up, before we address the Pythagoras formula.
Make sure you add both these formula to your exam formula revision sheet, and practice writing it out over and over again. Until you can do it with your eyes closed.
When you get into your 2st year science exam, I want you to ask for a piece of paper before you even log into the computer. Then I want you to write out your formula sheet from memory and free your mind, so that you can focus on the exam questions themselves, without trying to hold the formula in your head at the same time.
As with anything, you only get out, what you put in. Fail to plan and plan to fail.
Good luck!
As always, please like, share, and subscribe to get these important messages out there.
Take care
AdrianTransposition made easy video 2 - Electrical Science and principles 1st year examPure Electrical Training - by Adrian Davey2022-03-22 | Welcome back to the 2nd video in my transposition series, that I've put together to give you the best chance at passing the 1st year science exam.
In this video, I go through the formula for mechanical power and efficiency and I suggest that you add these to your formula exam sheet, along with the formula from video 1.
Hopefully, by now you are starting to get the hang of these formula and in the next video, I will step it up a level.
As always, Please like share and subscribe to get these important messages out there.
Take care
AdrianTransposition made easy video 1 - Electrical Science and principles 1st year examPure Electrical Training - by Adrian Davey2022-03-20 | Hello and welcome to another video by Adrian Davey from Pure electric.
In this video, I talk you through transposing basic electrical formula that will be required in your 1st year science and principles exam.
I start of with a basic formula for levers, as this is easy to move around, and then move on to the formula for transformers.
As with anything in life, you only get out, what you put in, so I want you to practice this at least 2-3 times a week on top of your college day.
The formula that I use in this video should be copied onto your formula sheet and I want you to practice writing this out, until you can do it from memory.
When you come to the exam, I want you to ask for a piece of paper and to start writing out that formula sheet that you've been practising, so that you can clear your head and focus on the exam itself.
There is a direct correlation between people who write out a pages of formula and notes and achieve distinctions, compared to those who only draw out an Ohm's law triangle and scrape a pass.
Good luck!
As always, please like, share and subscribe to get these important messages out there.
Take care
AdrianHow to chase in a double socket with minimal damage to wallPure Electrical Training - by Adrian Davey2022-02-26 | ...Inspection and Testing R1 + R2 and fault findingPure Electrical Training - by Adrian Davey2022-01-15 | Welcome to my third video in this inspection and testing series, where I talk you through how the MFT works, so that you can try to understand testing of R1+R2 resistances.
This will help you know what a good/bad reading is and leads into basic fault finding during this test.
I will go into the different types of fault during later videos within the series, but this should help you build a picture in your mind and as we work through this video series, build on that picture to develop your understanding.
As always, please like, share and subscribe to get this important information out there
Don't forget to look out for the 4th video in this series, which will be on testing of earthing and bonding conductors.
Take care
Adrian1b. Safe isolation and EAWR 1988 Part 2 - Where and how to safely isolate. Helps AM2, CG 2391 etc.Pure Electrical Training - by Adrian Davey2022-01-01 | This is Part 2 of this video and I will now talk you through where and how to isolate, by showing you with simplified pictures and diagrams, to give you the best chance at success.
Whether that is in your college and AM2 assessments, or in a real life environment.1a. Safe isolation and EAWR 1989 Part 1 - How safe isolation complies and dangers of electric shockPure Electrical Training - by Adrian Davey2022-01-01 | Welcome to Part 1 where we discuss the Electricity at Work Regulations 1989, and how we can comply with that statutory document through safe isolation.
I'll also show you what can happen when you receive an electric shock in order to prove why this simple, but effective procedure can keep people safe.1. Safe isolation and EAWR before testing, why, where and how (Part 1 & 2 full video)Pure Electrical Training - by Adrian Davey2021-12-31 | This video is part one of my inspection and testing series, where I aim to talk you through the whole process, step by step.
The first thing we need to consider when working on any electrical installation, is safe isolation.
What is the legal motivation?
Where can you find the guidance?
What should be your personal motivation?
What are the considerations and equipment required?
Where do you isolate and how do you isolate?
All these questions and more, are answered in this video, I hope it is of some use to you and gives you something to think about.
Take care
AdrianHow to make a socket nulling adapter for your tool bagPure Electrical Training - by Adrian Davey2021-11-21 | In this video I talk you through a quick project that I put together to solve an age old problem.... How to null your socket adapter when testing.
I've always used a piece of metal or mu cutters to jam between the terminals, but I wanted something that looked more professional to use when teaching apprentices at college.
I saw a post recently on Twitter where someone had used a trailing socket with a bungee cord on to hold their plug in socket tester on their bag, and thought that the next evolutionary stage was to incorporate a way to null your socket adapter too.
This piece of kit cost me £5 for the trailing socket, £10 for 6 x karabiners and I had a bungee cord laying around.
This took me around 20 mins to build and I'm really pleased with the result... I hope you do too!
Take care
AdrianHow to make apprenticeships work for you at any age: Video with Solent Apprenticeship hub Part 3Pure Electrical Training - by Adrian Davey2021-06-20 | In this video I conclude my first conversation with Lizzie Ogley from the www.SolentApprenticeshipHub.com
We discuss wages and I created a rough guide of cost/wages vs time comparison between the electrical apprenticeship and the diploma route, and feel that I give a good argument for starting an apprenticeship at any age, regardless of financial commitment, as the cost saving on an apprenticeship is comparable to the pay drop in the first year.
We also give tips and ideas on how to negotiate a better wage for yourself, as the minimum wage is just that. It is the absolute minimum wage that you are allowed to be paid depending on your age, but you are perfectly entitled to negotiate for more depending on the value that you add to the company.
For those of you looking to change career, I tried to include a lot of information in there for you too, as career changers usually make the best learners as they are more invested in their future and I love having you in the class, as it helps the younger ones see where the bar needs to be set.
I hope this video helps and as always
Like - Share - and Subscribe
To get this important message out there.
Take care
AdrianBenefits of a Traineeship, and integrating it into the beginning of the apprenticeship process?Pure Electrical Training - by Adrian Davey2021-06-19 | This video is Part 2, of a three part series that I've had with Lizzie from the Solent Apprenticeship Hub. www.solentapprenticeshiphub.com
In this video we discuss the benefits of Traineeships for employers, and would be apprentices.
For someone looking into starting an apprenticeship it's a foot in the door to securing your job, along the way you get 6 weeks of training to help you secure employment by training you in customer service and things like self management.
For the employer, it's a chance to try out a potential candidate for free, whilst also being paid a £1000 per trainee for a 4 week period. This would be an amazing chance to find the right candidate for the job, with very little risk to yourself and absolutely no expense. In fact, you are paid £250 a week for your trouble.
Personally, I can see the benefits to both parties if this is carried out correctly, and I've also drawn up an infographic road map to help both parties see how they could integrate this into their recruitment process, thus streamlining and maximising the process.
As always, please Like - Share - and Subscribe to to get this important message out there and let's help people make their first steps into the apprenticeship world.
Take care
Adrian£4K to take on an apprentice: Solent apprentice hub provide the information and incentives you needPure Electrical Training - by Adrian Davey2021-06-07 | This video is part 1 of my recent conversation with Lizzie form the Solent Apprenticeship hub, as I'm keen to get the right information into the hands of the employers.
Currently at the moment, you can get £1000 incentive straight away, and a further £3000 available before September 2021 to take on an apprentice of any age!
Something else that I didn't know about apprenticeships, is the fact that you can even get an apprenticeship with the company you are already employed with.
The Solent Apprenticeship Hub provide the much needed link between employers, apprentices and the training providers, and are funded by the government.
As a busy employer you may be struggling with the time to spend doing all the leg work, and this is where the Solent Apprenticeship Hub can help you in you search for the right apprentice.
Part 2 in the series has an even bigger bombshell when Lizzie points out another government scheme where you can get paid to try apprentices out for 4 weeks before you commit, at no cost to you.
As always please help by getting these important messages out there
Digital Apprenticeship Service Register for a digital service account Register for an apprenticeship service account to access funds or pay for training. You’ll be able to apply for the incentive payment after you add new apprentices to your account. If you pay the apprenticeship levy and use an apprenticeship training agency, you cannot use funds from your digital account to pay for the training agency’s services. How to register and use the apprenticeship service as an employer - GOV.UK (www.gov.uk)
In this video I talk through the recent changes to the EAS specification, which has been thrust into the limelight by a recent NICEIC post in Professional Electrician titled
"No more shortcuts" as NICEIC updates entry criteria in line with EAS specification.
So what does this mean for the domestic installers already in the system, and those looking to start one?
Ultimately, not a lot for those already in the system. But if not, you need to have 2 years experience and be registered before September 2021 otherwise your best option is to choose a more traditional route.
To enable you to chose the correct route into the industry, I've created a series of videos from real life experiences of people who have already chosen.
One thing for sure, is it's not as easy as the training providers would have you believe!
As always please get these important messages out there
Like - Share - SubscribeOne of the biggest mistakes that I made as an electrical apprenticePure Electrical Training - by Adrian Davey2021-06-01 | This video is a snippet from the end of a recent video that I made with Jake.
In it I describe a perfect example of where my head was at as an apprentice, when my boss asked me to get a vehicle to get to work in.
He was thinking of a van and for me to become an asset to the business, I was thinking of a convertible to attract girls and look cool.
My advice to all apprentices is to think about what it takes for an employer to afford to take on you as a responsibility.
Are you an asset to the company, or an expensive inconvenience.
EnjoyBecoming an electrician: Jake is looking to change career and had questions for the CG2365 diplomaPure Electrical Training - by Adrian Davey2021-05-31 | In this video I talk to Jake, who is looking to change career in his late 20's.
Jake has watched a few of my videos and has created a career path for himself and he just wanted to check a few of the details with me, like the opportunity to change from the CG2365 diploma route after level 2, and joining the apprenticeship route at level 3 to avoid being paid an apprentices wage for the first year.
We also discussed what qualifications to get and the order in which to get them, and tips on how to gain employment and ensure that you get the best from the course, and strengthen his chances of securing employment at every step of the way.
I hope you enjoy the video, and thank you for watching.
As always, Like - Share and subscribe to get these important messages out there.Becoming an electrician: Sachins experience on the full time EAL level 2 diploma routePure Electrical Training - by Adrian Davey2021-05-23 | In this video I talk to Sachin, who has been on the full time EAL level 2 diploma qualification, and is wondering what his options are.
So far he has been working with his dad, who sounds like a really conscientious electrician who looks after his client base, but is close to retiring so Sachin wanted to know if there was anything he could do to improve his situation.
I've done my best to try and help advise Sachin with the little knowledge I have, and tried to explain how the portfolio works, and in part 2 we discuss at what point he could apply for membership of a competent person scheme.Video 3 of the 2346 AM2E experienced worker /5357 workplace logbook NVQ unit 106 talk throughPure Electrical Training - by Adrian Davey2021-05-20 | In this series of videos I briefly explain the workplace logbook, AKA the NVQ or portfolio.
This video covers the unit 106 Organise and oversee the electrical work environment.
If you have any further questions then please get in touch.
Get your copy of the 2346 AM2E experienced worker/5357 workplace logbook here:
amzn.to/3w4t90FLevel 2 and 3 electrical diploma routes - What you need to know. CG2365; 8202; and EAL equivalentPure Electrical Training - by Adrian Davey2021-05-19 | In this video I take a quick look at the self funded route, and a few options on how to achieve employment and experience through it, other than the usual working for free scenario.
The first thing you need to know it that a lot of people approach me on how to find employment after taking this route, because they still lack experience in the eyes of an employer after all, all the experience is classroom based, not real world site work based.
Secondly, if you cannot find an apprenticeship, or able to afford the minimum £4.30ph apprenticeship wage for the first year, you could complete the 1st year at college doing this route whilst looking for a job, so that when you come to the 2nd year you can transfer those 2365 modules over to the 5357 apprenticeship, and finish your route that way.
The diploma route can cost between £6-8k and can be a block of 16 weeks, or 2 evenings a week over 2-3 years depending on the college or training provider. Again both options have pro's and con's.
If you have any experiences to add to this set of video's then please get in touch.
Take care
AdrianNeil Phillips and I talk through the pros and cons of the existing electrical training routes Pt1Pure Electrical Training - by Adrian Davey2021-05-19 | This is the first half of a chat that I recently had with Neil Phillips from Electrical courses UK based in Cambridgeshire.
Neil approached me because he got the impression that I was slightly one sided on the routes into the industry and more pro apprenticeship, rather than the Diploma self funded route.
Personally, I find that all the routes have their problems, and one of the biggest problems that I hear about from people who have been through the Diploma route, is that they struggle to find employment after completing the course.
It might be that from an employers view, they only have classroom experience and not real life site experience, and there is a huge difference between the two. So Neil also wanted to point out that another option open to people looking for work after completing a Diploma route, might be to get a job as an electrical improver with the JIB who advertise their rate at around £16ph.
Another option that I have seen people talking about in the Sparky Ninja Facebook group, is being forced to use agency work as a way of gaining experience. I once did agency work for around 3 months and I found it soul destroying, and it still sounds like nothing has changed.
It is however, another option for gaining experience and a way of completing the workplace logbook (also known as the NVQ or Portfolio), and once that is done and you pass the AM2 you are then a qualified electrician in the eyes of the industry.
Hopefully agency work, is then a means to an end.
Anyway, this is Part 1 of our discussion... Any comments, suggestions or help gratefully received.
Part 2 out soonMathew’s domestic installer route into the industryPure Electrical Training - by Adrian Davey2021-05-18 | These videos are real life experiences that people have been through trying to enter the electrical industry, the aim of which is to help someone starting out on their journey, to make an informed choice.
In this video I talk to Matthew who went down the domestic installer route 12 years ago, and is comfortable that he knows his limitations. Luckily he has had a safety net of advice from family members within the construction industry that were able to help guide him after he completed course, but even so; Mathew has some clear warnings towards the end of the video on the downfalls of the domestic installer route.
Personally, I would like to thank Mathew for coming forward and sharing his experience so that others may learn from it, and we are now going to try and work out the next steps for Mathew to take, but as most of you will know; It's not easy to change career when you have financial responsibilities and a family to support.
One of the things that I would like to see come out of this, is the government offering more support to career changers, as the majority of people I speak to in that position are more likely to be fully invested in their future, they are just trapped by the financial constraints.
I'm not saying it isn't impossible, but it definitely complicates things.
One thing to remember is that the government are offering employers £3-4k to take on an apprentice, and that means the training is fully paid for, including the workplace logbook (NVQ) and the AM2.
The minimum wage for a first year apprentice is around £4.15ph for the 1st year (although you can try to negotiate a higher wage based on your skill set), and then rising to national minimum wage in year 2.
Another option is to start the diploma route and get level 2 done in the evenings, and then when you have a job in the 2nd year transfer onto the apprenticeship and that way avoiding the pay cut.
More information can be found here: electricalcareers.co.uk/wp-content/uploads/2020/08/TESP-England-Route-3-Self-Funded.pdfBecoming an electrician via the City and Guilds 2365 diploma route? This is Aidans experiencePure Electrical Training - by Adrian Davey2021-05-16 | These videos are produced to help enable people looking to join the electrical, have a clearer picture of what that journey may look like. For example the course length, the cost, getting a job at the other end, on going training, and what avenues are open to you once you complete the course.
Aiden reached out to me to discuss his route into the industry via the City and Guild 2365 levels 2 and 3, which were both 12 months long two evenings a week.
Like many others, Aiden felt that the school pushed him down the academic route because he had good grades, when they should have paid more attention to what he was spending his pocket money on. As such, he ended up in a career for 20 years which wasn't really want he wanted to be doing, so he looked at learning a trade.
Why do schools put the pressure onto academic individuals to go down the university route, and the non academic are told to learn a trade.
A level 4 maths and English is required to complete the City and Guilds 5357 electrical apprenticeship, and if you don't have it when you start, you need to complete functional skills and be at that level before you qualify. Yet the City and Guilds 2365, which follows the same qualification structure, does not have any entry requirements.
I wonder how many people are told that, and why that is?
Anyway, here is Aiden's experience.How to connect up 1-way and 2-way lighting with a fanPure Electrical Training - by Adrian Davey2021-05-16 | In this video Liam asked if I could just go through some wiring diagrams with him, as he felt like he wasn't entirely sure how to connect switches and fans up. It turns out that he had a pretty good idea, he just lacked confidence, and he was also 2nd fixing other peoples 1st fix which hadn't been labelled. That is always going to confuse anyone and require belling the cables out to ascertain their function, which will always take time.Trying to Become an Electrician through the City and Guilds 2365 route, this is Dexs experience.Pure Electrical Training - by Adrian Davey2021-05-14 | I'm making these video's to help those of you looking to join this industry, by giving you real life experiences.
In this video I talk to Dex, who I've been interacting with through social media for some time now, and he has been very supportive of the e5 group and those looking to inspire others to achieve their best.
Dex approached me to give you his experience through the City and Guilds 2365 diploma route. When Dex first set out he was able to get funding for the level 2 2365 which was a year long course, but the level 3 2365 is being phased out so he was forced to take the City and Guilds 8202 level 3 course at a cost of £2500.
The thing I like about Dex is that he has completely the right attitude towards learning, which you will discover when you are watching this video. He reads up on anything that will improve his knowledge, buys tools to learn on and incentivise him to push forward, and is in the middle of building himself a practical board at home, so that he can hone his skills while watching YouTube videos and reading books.
Dex has found it hard to find a job in his chosen profession, partly because of a lack of experience, which those of you looking to choose this route may also face. This course is purely college based in classroom conditions and as such you will not be getting on site experience with this route. (There are 3 main routes into the industry which you can find here electricalcareers.co.uk/joining-the-industry/training-routes
You are then also purely reliant on the tutor who is training you, (unlike in an apprenticeship where you are on site 4 days a week) unless you are working with an electrician outside of college. This could be because you are either doing this full time, or around existing commitments like changing career, but on top of this Dex also has a disability which means that he has to really push himself to succeed, which he appears to be doing rather well.
Please watch the video and if you are able to help Dex in anyway fulfil his ambition of being an electrician in spite of his disability, I'm sure you will not be disappointed.Want to become an electrician? Lee chose the domestic installer route and this is his storyPure Electrical Training - by Adrian Davey2021-05-12 | In this video I talk to Lee who approached me to give his experience on the domestic installer route.
Lee initially paid for the classroom based intense course, as he was looking at just rewiring properties that he would buy and doing them up to sell/rent.
Due to his circumstances changing, Lee found himself made redundant due to Covid and as such, has had to fall back on this qualification which has thrown up a few problems that weren't immediately obvious.
This was an interesting insight into this particular route for me, because I have a lot of questions around the validity of these courses, and the quality and competency of applicants finishing the them.
This is Lee's story and if you are considering this option, then you may want to watch this video before you make your choice, as it may not be right for you.
Lee sounded like an absolutely smashing, enthusiastic and switched on individual, which is someone that will do well for this industry and I wish him all the best on his journey.Looking to become an electrician in the UK? Lawrences career change MOD self funded route or AM2EPure Electrical Training - by Adrian Davey2021-05-11 | In this video I talk to Lawrence who is looking to change career from the MOD to electrician.
He already has the CG2391, 2396 and 7909 under his belt, so I try to help give Lawrence all the options open to him and save him money and time.
The choices are the CG 2365 level 2 & 3, or the AM2E experienced worker route. I also give Lawrence a quick break down of the NVQ/Portfolio/Workplace logbook, so that he knows what he needs to start building, as either way it needs to be done before you can enter the AM2.
If you are in similar circumstances it may be worth watchingLooking to become an electrician in the UK? Paul did the diploma route and this is his experiencePure Electrical Training - by Adrian Davey2021-05-09 | Every Sunday I now hold a Zoom session to discuss various topics within the industry, whether they are looking to enter it and want to know what options they have, or already in it but need advice on what to do next.
These videos are designed to help people make informed choices on what they need and get the much need answers that they want.
In this video I talk to Paul who has recently completed his journey to AM2, and what he had to go through to get there.
Paul went down the City and Guilds 2365 diploma route because he wasn't fully aware about the other routes, and also due to having financial responsibilities, was unable to take the pay cut to an hourly wage of £4.15 for the first year of an apprenticeship. Paul like many others choosing the diploma route, then struggled to find employment because he still lacked experience.
This also meant that he ended paying around £8000 on training fee's and it took 5 years to get to the AM2, whereas in an apprenticeship the fees as paid for you.
Even if you are over the age of 19 your employer only has to pay 5% of the apprenticeship fees, which is around £900. Currently employers can receive a financial incentive of £3000 - £4000 for taking on an apprentice, which after the £900 costs leaves them with £2100 - £3100.
And that for me is the biggest problem.
The only person losing out is the people looking to change career, as if you divide the £8000 Paul paid for his training by 3 years it comes to £2666.66, which is cheaper than taking a pay cut to £4.15 an hour for the first year, rising to £8.40 when you are over 19 in the 2nd year.
More needs to be done to support people changing careers, and maybe the government need to look at boosting the £4.15 per hour wages of people over the age of 19, to enable an apprenticeship to be a viable option.
Thank you to Paul for sharing and I have some more experiences on the way.Are you testing insulation resistance of a domestic installation properly? I now know I wasn’t!Pure Electrical Training - by Adrian Davey2021-05-02 | In this video I talk about insulation resistance and resistors in parallel.
How many of you have learned about resistors in parallel at college, but never understood where you would use it in the real world?
I found out recently that when you are carrying out insulation resistance within an installation, because those resistances are in parallel with the supply we should be calculating the total installation resistance as a parallel resistor.
We all know that 1MegOhm is the minimum value for an installation, but how does that translate to a real life scenario?
Watch the video and find out, and let me know how many of you who knew that.
Take care
Adrianshortage of electricians in the UK; fact or fiction?Pure Electrical Training - by Adrian Davey2021-04-18 | In this video, I quickly discuss an article that was in the Electrical Trade magazine;
"Half of the UK has a shortage of more than 50 electricians"
And I give you my view on this statistic. Have a look and let me know if you agree, or disagree and why.Incompetent and dangerous EICRs, the Electricity at Work Regulations, and are the public in danger?Pure Electrical Training - by Adrian Davey2021-04-14 | In this video I briefly talk through a recent EICR that I came across a social media post, and that prompted me to talk about a fraudulent unsatisfactory EICR that was completed on the sale of a flat, and inevitably cost the seller money and nearly the sale of the flat.
Not to mention the stress and fear that they were also in danger in their own home, and how much this was going to cost them.
At the moment there appears to be a huge rise in the number of Electrical Installation Certificates (EICR's) being completed that are completely fictitious and bordering on Fraud, or completed due to incompetence, or both.
All I know is that something needs to be done, but what...Are you ready for the AM2 or AM2SPure Electrical Training - by Adrian Davey2021-03-14 | In this video I talk through the NET AM2S Readiness for Assessment: Candidate Self Assessment Checklist and associated costs with the AM2S.
The reason being is that I have heard a few people complain that they feel like they are being pushed into something they are not ready for, and then left with the financial burden when they have to pay for a retest fee.
If you feel like you are in this position then please watch and get in touch.
As always please like and share to get these important messages out there, thank you.