Supply Voltage (VCC): DC 3.0 ~ ±0.5V Sensitivity: 2.50 mV/G Linear Output Voltage Range: 0.1 ~ ( VCC +0.1) V Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC Noise (no load): ≤40mVpp FEATURES:
Hall sensor 4 ball-bearings Adjustable tension Can be enable or disable self centering on both axis and ratcheting on the Y axis Special material quality that wears well
FrSky M9 Hall Sensor Gimbal Installation For Taranis X9D PlusFrSky RC2017-01-12 | SPECIFICATION:
Supply Voltage (VCC): DC 3.0 ~ ±0.5V Sensitivity: 2.50 mV/G Linear Output Voltage Range: 0.1 ~ ( VCC +0.1) V Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC Noise (no load): ≤40mVpp FEATURES:
Hall sensor 4 ball-bearings Adjustable tension Can be enable or disable self centering on both axis and ratcheting on the Y axis Special material quality that wears well
Buy from our dealers: http://frsky-rc.com/buynow.htmlFrSky | Assemble CNC Metal Tray for TANDEM X18 & X20 Series RadiosFrSky RC2023-02-14 | How to assemble CNC Metal Tray for TANDEM X18 & X20 Series Radios 01. Tray parts: A B C 00:10 02. Fix part B to A with M2*6 screws 00:14 03. Fix part C to A using ST2*7 screws 00:25 04. Loosen the screws to put the radio into the tray and tighten the screws again 00:31 05. Twist the expansion tube to have the radio fixed in the tray. 00:42
TANDEM Series ETHOS radios: frsky-rc.com/product-category/transmitters/tandem-series ETHOS Official Website: ethos.frsky-rc.comFrSky | How to use Wireless PARA Trainer Function on ETHOS radiosFrSky RC2022-08-10 | How to use Wireless PARA Trainer Function on ETHOS radios 01. ETHOS System Verison 00:05 02. Wireless Tool Settings 00:22 03. Trainer Tool Settings 01:03 04. Output Checking 02:29
@FrSkyRCliveFrSky VANTAC | Multi-purpose Portable Thermostatic Soldering IronFrSky RC2022-06-01 | SPECIFICATIONS • Size: 102x30x183mm • Weight: 50g • Soldering tip: T8 Series • Temperature Compensation: -50℃ ~50℃ • Temperature Range: 80~450℃ (176~842℉) • Sleep Time: 1~30Min • High-temperature resistance set of head: GP9 • Voltage Range: DC5V≥2.1A~24V
FEATURES • A variety of power supply options are available (Such as USB power supply, power bank, car power supply, adapter, 2S-6S RC battery, etc.) • Different voltage and power for your choice • Adopting the T8 series plug in&out integral soldering tip, quick and convenient to replace • The high-temperature sleeve is made of special materials and heat-insulating technology. The handler is not hot and comfortable to hold. • The handle button adopts the embedded design button, which is firm and does not fall off, feels comfortable and operates freely. • With the anti-reverse connection protection function. • You can set the sleep time period freely (1~30min). The sleep temperature drops to 80℃. If you do not use this soldering iron for 30 minutes, it will automatically shut down. • Small volume. Three-key design, strong function. • Recovery temperature is extremely fast, when the voltage reaches 24V, the temperature rises quickly, and the tin can be melted in 3 seconds. • Quality heating element. Ultra strong platinum temperature sensitivity. • Two kinds of temperature show models. (Celsius ℃, Fahrenheit℉). • Complement value through microcomputer temperature. Error margin less than ± 5℃. • LED display. Content is clear at a glance. • The handle is made of special high-temperature resistant material, ESD antistatic treatment. • Professional (function password lock, sleep function, with T8M series soldering iron head).
PACKAGE LIST • Soldering iron *1 • Patch cord *1 • Soldering iron stand *1 • Small hexagon wrench *1 • User manual *1 • Guarantee certificate *1FrSky VANTAC | Electrical Power Screwdriver EPS01FrSky RC2022-04-12 | FrSky VANTAC | Electrical Power Screwdriver EPS01
FEATURES • Lightweight and portable design • 8 screwdriver bits can be carried via bits holder(29 bits in total) • Included special design screw bits for RC hobby applications • Free switching between Electric & Manual working modes • Settable High & Low rotating Speed • Rotation direction regulation: Clockwise / Counterclockwise • Shadowless LED lighting function • 2 Hours Required for Fully Charge • Integrated Magnetize and Demagnetize squares into the toolbox • Magnetic toolbox cover for gathering scattered parts
PACKAGE LIST • Screwdriver x 1 • Bits Holder x 1 • Bits x 29 • Extension Pole x 1 • Lanyard x 1 • Type-C Cable x 1 • Tool Case x 1FrSky | TD R18 2.4GHz & 900MHz Dual-Band ReceiverFrSky RC2022-03-04 | FrSky 2.4GHz/900MHz Dual-Band Receiver Introduction & Function Tutorial 01. Unboxing 00:30 02. QR Code Manual 02:04 03. Firmware Upgrade 02:23 04. Binding Process 03:26 05. Power Switch Functionality 04:34 06. Battery Balanced Consumption 05:49 07. FBUS mode 06:25 08. Telemetry from Multiple Xact Servos 07:25 09. What other configurations can be done with Xact servos? 09:27 10. Using S.Port & FBUS sensors together on TD R18 09:52
TD R18 Receiver Page: frsky-rc.com/product/td-r18FrSky FreeLink App | How to Configure Stabilization ReceiversFrSky RC2020-06-02 | FrSky FreeLink App | How to Configure Stabilization Receivers
To configure a stabilization receiver like S6R, S8R, R9 Stab OTA and etc., you may get to know how to configure these devices through LUA script on your radio, or FreeLink on the PC. This video will show you another convenient way to configure stabilization receivers with a more readable interface via FreeLink App on your smartphone. More functions of this App are still under developing in progress, stay tuned, and thanks for watching!
ACCESS: frsky-rc.com/frsky-advanced-communication-control-elevated-spread-spectrum-access-protocol-releaseHow to use PARA wireless trainer systemFrSky RC2019-08-20 | This video will show you how to use PARA wireless trainer system. FrSky PARA system is the latest wireless trainer system, it achieves triple performance than original trainer system with high-speed signal transmission and low latency training control between PARA transmitters. We hope you find this video helpful, thanks for watching and enjoy the function with a partner!
Step 1: In the Radio Menu go to page 6 to enable the BT of TX1, and set it as the "Trainer" (Take note of the code) 00:36 Step 2: Enable the BT as "Trainer" on TX2 as well 00:50 Step 3: On page 2 of the Model Menu, decide which Transmitter will be the "Master/BT" and "Slave/BT" 00:58 Step 4: On page 2 of the Model Menu search for the "Slave" Transmitter through your "Mater" Radio, and choose the appropriate code. 01:20 Step 5: The "Slave" transmitter should now be connected. 01:30 Step 6: Move to page 10 of the Model Menu to the "Special Function" page and appoint the "Trainer" function to a switch or button. 01:38 Step 7: Switch to the "Slave" controls while holding the assigned switch/button. 01:51 Enjoy the function with a partner!
Purchase here frsky-rc.com/purchaHow to open and place the module cover and external module of the Taranis X-LiteFrSky RC2018-05-22 | This video will show you how to open and place the module cover and external module of the Taranis X-Lite. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHigh Speed Amazing Chasing Flight with FrSky VANTAC AR+ WingFrSky RC2018-05-03 | OVERVIEW VANTAC AR+ Wing has white EPP molded wing and fuselage, plus a built-in carbon fiber spar which makes the structure durable, rigid and lightweight. Detachable wings and wingtips make it portable and easy to take anywhere for FPV flying. Multiple bonus camera mounts, compatible with all FPV HD cameras in the market. It is easy to hand launch, super stable and fast. Flying speeds range from 20km/h - 180km/h. Wingspan is 900mm with a high efficiency airfoil, which creates high elevating authority. Spacious equipment bay for all your FPV gear. Removable battery slot for better "CG" adjustment. "CG" bump mark under the main wing for easy balancing. AR+ Wing also has 2 skids for hand launching and landing. "NACA" Air inlet and outlet for cooling FPV gear.
SPECIFICATIONS · Wingspan: 900mm(35.43") · Length: 482mm(18.97") · Flying Speed: 20km/h - 180+km/h · Specially tuned by FrSky, upgraded motor and super duty ESC. · Pre-installed S6R 6-Channel Receiver with 3-Axis Gyro features stability augmentation and Smart Port Telemetry. · Bright LED lights · Carbon fiber hatch handle
INCLUDING · 1x Vantac AR+ Wing 900mm wingspan EPP FPV flying wing KIT · 1x FrSky S6R receiver · 1x FrSky FrBLS_80A BLHeli 32bit ESC includes 5V&12V BEC · 1x Vantac Solo 2208 3000KV Motor · 2x Gemfan 5152 tri-blade props · 1x LED strip
PROMOTIONAL PRICE (TAX EXCLUDED): $160 MORE DETAILS: frsky-rc.com/product/vantac-ar-wing PURCHASE HERE: frsky-rc.com/purchaseFrSky Compact Transmitter Taranis X-Lite Promo VideoFrSky RC2018-04-25 | #Taranis #X-Lite is available now at a special promotional price of $119.99 USD. The Taranis X-Lite blends the functionality and reliability of #FrSky #Transmitters with a compact #Game-Style #controller. Compact in size means you can take it virtually anywhere. The pre-installed high precision #M12 Lite hall sensor gimbals can be adjusted without disassembling the case. It also has a quick access battery bay for quickly replacing the 18500 battery. Additionally the X-Lite runs the familiar #OpenTX software, and the updated internal and external module interfaces make the data-transmission speed faster with even lower latency.
Special Promotion Price (Tax Excluded): 119.99 US$
For more information please visit FrSky’s website: frsky-rc.com/product/taranis-x-liteFrSky VANTAC High Speed AR+ Wing Quick PromoFrSky RC2018-03-15 | OVERVIEW VANTAC AR+ Wing has white EPP molded wing and fuselage, plus a built-in carbon fiber spar which makes the structure durable, rigid and lightweight. Detachable wings and wingtips makes it portable and easy to take anywhere for FPV flying. Multiple bonus camera mounts, compatible with all FPV HD cameras in the market. It is easy to hand launch, super stable and fast. Flying speeds range from 20km/h - 180km/h. Wingspan is 900mm with a high efficiency airfoil, which creates high elevating authority. Spacious equipment bay for all your FPV gear. Removable battery slot for better "CG" adjustment. "CG" bump mark under the main wing for easy balancing. AR+ Wing also has 2 skids for hand launching and landing. "NACA" Air inlet and outlet for cooling FPV gear.
SPECIFICATIONS · Wingspan: 900mm(35.43") · Length: 482mm(18.97") · Flying Speed: 20km/h - 180+km/h · Specially tuned by FrSky, upgraded motor and super duty ESC. · Pre-installed S6R 6-Channel Receiver with 3-Axis Gyro features stability augmentation and Smart Port Telemetry. · Bright LED lights · Carbon fiber hatch handle
INCLUDING · 1x Vantac AR+ Wing 900mm wingspan EPP FPV flying wing KIT · 1x FrSky S6R receiver · 1x FrSky FrBLS_80A BLHeli 32bit ESC includes 5V&12V BEC · 1x Vantac Solo 2208 3000KV Motor · 2x Gemfan 5152 tri-blade props · 1x LED strip
COMPATIBLE WITH AR+ Wing (Not Included) · Battery: 3-4S 1300-2200mAh 25C-100C Lipo · Compatible Cameras: GoPro H3/H4/Session, Runcam2/3 HD, Foxeer HS1177How to modify and replace the transmitters default audio speechFrSky RC2018-02-27 | This video will show you how to modify and replace the default audio speech for Taranis and Horus transmitters. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to configure the parameters and monitor the sensors with the S Port AirLink SFrSky RC2017-12-08 | This video will show you how to configure the parameters and monitor the sensors with the S Port AirLink S. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to connect the Smart Port (S.Port) of the receiver to the F3/F4 FCsFrSky RC2017-10-26 | This video will show you how to connect the smart port of the receiver to the FC for realizing the telemetry function. In this video, we will use the X4RSB and R-XSR as the examples.
Purchase here frsky-rc.com/purchaseHow to flash the internal XJT module of the X9D Plus with a Mini USB wireFrSky RC2017-10-20 | This video will show you how to flash the internal XJT module of the X9D Plus with a MinUSB wire. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to flash the internal XJT module of the X9D Plus with a SD cardFrSky RC2017-10-20 | This video will show you How to flash the internal XJT module of the X9D Plus with a SD card. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to use companion to flash the firmware of X9D PlusFrSky RC2017-10-20 | This video will show you how to use companion to flash the firmware of X9D Plus. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to flash the bootloder of the transmitterFrSky RC2017-10-20 | This video will show you how to flash the bootloder of the transmitter. We hope you find this video helpful, thanks for watching!
Purchase here frsky-rc.com/purchaseHow to flash the firmware of the X9D Plus with the Mini USB wireFrSky RC2017-10-20 | This video will show you how to flash the firmware of the X9D Plus with the MiniUSB wire. We hope you find this video helpful, thanks for watching!
FrSky X9D Plus frsky-rc.com/product/taranis-x9d-plus-2 FrSky X9D Plus SE frsky-rc.com/product/taranis-x9d-plus-se Purchase here frsky-rc.com/purchaseFrSky flight controller XSRF4O and XSRF4PO overviewFrSky RC2017-09-30 | XSRF4O Features: ● Built-in F4 and XSR receiver module ● Built-in BARO BMP280 ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a full duplex telemetry receiver, it will receive the commands of radios and send to F4 by SBUS (8CH is RSSI) to UART1 of F4, it can also send telemetry information back to radio by Smart Port. ● 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers. ● OSD configuration has been included in Betaflight GUI.
XSRF4O Specifications: ● Dimension: 36*36*6mm(L*W*H)with 30.5mm mounting holes ● Weight: 7.7g ● Operating Voltage Range: 4.0-10V (recommend 5V) ● Operating Current 200mA@5V ● Number of Channels: 16CH(8CH is RSSI)by SBUS to UART1 OF F4, Smart Port of XSR to UART6 of F4 ● Hardware: STM32F405 MCU, SPI Sensor, MPU6000, OSD, SD.
XSRF4PO Features: ● Built-in F4 and XSR receiver module ● Built-in onboard PDB up to 6S integrate with current sensor ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a full duplex telemetry receiver, it will receive the commands of radios and send to F4 by SBUS (8CH is RSSI) to UART1 of F4, it can also send telemetry information back to radio by Smart Port. ● 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers. ● OSD configuration has been included in Betaflight GUI.
XSRF4PO Specifications: ● Dimension: 60*36*6mm(L*W*H)with 30.5mm mounting holes ● Weight: 14g ● Operating Range: Up to 6S ● Operating Current: 200mA@5V ● Number of Channels: 16CH(8CH is RSSI)by SBUS to UART1 of F4, Smart Port of XSR to UART6 of F4 ● Hardware: STMF32F405 MCU, SPI sensor, MPU6000, PDB.OSD, SD.
Purchase here: frsky-rc.com/purchaseHow to change the throttle gimbal of the Horus transmitters from default Mode2 to Mode1FrSky RC2017-09-27 | This video will show you how to change the throttle gimbal of the Horus transmitters from default Mode2 to Mode1. We hope you find this video helpful, thanks for watching!
FrSky Horus X10 frsky-rc.com/product/x10 FrSky Horus X10S frsky-rc.com/product/x10s FrSky Horus X12S Purchase here frsky-rc.com/purchaseNew FrSky Horus X10 & X10S 16 Channels Transmitter PromoFrSky RC2017-09-21 | The FrSky Horus X10 and X10S are the latest transmitters to join the FrSky family. They both carry on all of the features of their predecessor’s and each model has its own unique advantages.
The X10 series carries forward all the advantages of its big brother the X12S, the X10 and X10S have the built-in iXJT+ module, detachable external antenna, and an industrial LCD screen. Comes with FrSky’s own easy to use FrOS (operating system) and of course, supports OpenTX as well. The X10 series also inherits the wireless trainer system, antenna detection and SWR warning functions. Designed with 2 internal antennas to improve signal strength and improved battery life with a rechargeable Li-ion battery.
The two main differences between the X10 and X10S are the Horus X10 has M10 hall sensor gimbals with adjustable sticks. The Horus X10S is equipped with our latest and best gimbal to date, the MC12 Plus has all CNC digital higher accuracy 10 ball bearing hall sensor Gimbals than MC12 gimbal of the X12S. These gimbals offer the most precise control for your flying experience.
Shop Now From Our Dealers: frsky-rc.com/purchaseFrSky flight controller XSRF3O and XSRF3PO overviewFrSky RC2017-09-08 | XSRF3O Features: ● Built-in F3 and XSR receiver module ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a full duplex telemetry receiver, it will receive the commands of radios and send to F3 by SBUS (8CH is RSSI) to UART2 of F3, it can also send telemetry information back to radio by Smart Port. ● 8 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers. ● OSD configuration has been included in Betaflight GUI.
XSRF3O Specifications: ● Dimension: 36x36x6mm (L x W x H) with 30.5mm mounting holes ● Weight: 6g ● Operating Voltage Range: 4.0-10V ● Operating Current: 200mA@5V ● Number of Channels: 16CH (8CH is RSSI) by SBUS to UART2 of F3, Smart Port of XSR to UART3 of F3 ● Hardware: STM32F303 CPU,MPU6050(Accelerometer/Gyro),OSD,SD Slot and XSR
XSRF3PO Features: ● Built-in F3 and XSR receiver module ● Built-in onboard PDB up to 6S integrate with current sensor ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a full duplex telemetry receiver, it will receive the commands of radios and send to F3 by SBUS (8CH is RSSI) to UART2 of F3, it can also send telemetry information back to radio by Smart Port. ● 8 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers. ● OSD configuration has been included in Betaflight GUI.
XSRF3PO Specifications: ● Dimension: 60*36*6mm(L*W*H)with 30.5mm mounting holes ● Weight: 14g ● Operating Voltage Range: Up to 6S ● Operating Current: 200mA@5V ● Number of Channels: 16CH(8CH is RSSI)by SBUS to UART2 of F3, Smart Port of XSR to UART3 of F3 ● Hardware: STM32F303 CPU, MPU6050(Accelerometer/Gyro),PDB,OSD,SD. ● Compatibility: FrSky Taranis X9D/X9D Plus/ X9E/ Horus X12S/ XJT in D16 mode ● Firmware Upgradable: Firmware Upgradable
XSRF3PO Retail Price (Tax excluded): 49.99US$ XSRF3PO FrSky links: frsky-rc.com/product/xsrf3poFrSky Mini Drone Flight Inside The Shopping MallFrSky RC2017-07-31 | FrSky Mini Drone Flight Inside The Shopping MallFrSky M7 Hall Sensor Gimbal Installation and Calibration ProcessFrSky RC2017-07-13 | 0:25 - Remove the battery and remove the 4 screws to open the radio 0:55 - Install the M7 with the sensors towards the outside 1:20 - To release the centering on the throttle axis place the provided screw into the hole to disable the spring 1:55 - Adjust the tension by tightening these plates 2:15 - Again place the sensor to the outside 2:59 - Calibrate the sticks by following the directions on the screen, make sure to move the sticks with normal pressure.
Purchase: HorusRC: goo.gl/PDjctL GetFPV: goo.gl/Rg8g6g AloftHobbies: goo.gl/DVxAhr T9: goo.gl/2hMb1X RC Studio: https://rcstudio.cz/cs/ Banggood: goo.gl/EAB5GBFrSky participated in IDRA 2017 International Drone Racing Series in DoverFrSky RC2017-07-10 | FrSky at IDRA 2017 Drone Racing Series in Dover International Raceway. Drone Racing at NASCAR in Dover, Delaware USAM7 Hall Sensor Gimbal Design for FrSky Taranis Q X7FrSky RC2017-07-04 | The M7 Hall Sensor Gimbal is a Plug and Play Upgrade for the Taranis QX7. It allows for highly accurate inputs for those who demand precision. Made of high-quality materials that will not wear down quickly like others.
SPECIFICATIONS ● Supply Voltage (VCC): DC 3.0 ~ ±0.5V ● Sensitivity: 2.50 mV/G ● Linear Output Voltage Range: 0.1 ~ ( VCC +0.1) V ● Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC ● Noise (no load): ≤40mVpp
FEATURES ● Hall sensor ● 4 ball-bearings ● Adjustable tension ● Easily enable and disable centering sticks on each axis and ratcheting can be applied to the Y axis ● Made of quality, low wear materials
Firmware Update Tool for PC Version 2.0: Support both .frk & .frsk files.
Official Website: frsky-rc.com Purchase: frsky-rc.com/purchaseFrSky RX8R Redundancy Bus Receiver Introduction and Basic GuideFrSky RC2017-06-01 | Binding and confirming the redundancy function of your RX8R. When this redundancy receiver is paired with another receiver they will act as a back up to one another. If master receiver goes into failsafe, the output signal from the slave receiver will be used until the master receiver regains a stronger output signal.
Features: ● Combine two RX8R to become a 16 channel receiver ● Smart Port enabled and support telemetry ● Supports redundant transmission of two Tx modules in parallel
FrSky Facebook: facebook.com/FrSkyRC FrSKy Instagram: instagram.com/frsky_rcGet out and fly with the FrSky XSR mini telemetry receiver!FrSky RC2017-05-26 | Get out and fly with the FrSky XSR mini telemetry receiver! Now super low price $14.99usd!
Model Name: XSR
Features: ● Smart Port enabled, realizing two-way full duplex transmission. ● S-BUS output. CPPM output. ● Lighter weight and smaller than X4R. ● More number of channels: 1~16ch from SBUS channel, 1~8ch from CPPM channel.
Specifications: ● Dimensions: 26mm x 19.2 mmx 5mm (L x W x H) ● Antenna Length: 90mm ● Weight: 3.8g ● Operating Voltage Range: 4 ~10.0V ● Operating Current: 100mA@5V ● Operating Range: ≥ 600m ● RSSI output: analog voltage output (0~3.3V)
Includes: ● XSR *1 ● Data Wire *1 ● Manual *1 ● Antistatic Packaging Bag *1
Features: ● Built-in FrSky XM Receiver ● Micro F3 6DOF flight controller with 32-bit STM32F303CC processor and MPU6050 ● High RPM and furious flying speed ● Powered by 350mAh 2S 7.4V 25C lithium-ion battery ● As big as the palm of your hand - 90mm wheelbase ● Extremely light only 42.9g
Purchase here: http://www.frsky-rc.com/buynow.html FrSky Facebook: facebook.com/FrSkyRC FrSKy Instagram: instagram.com/frsky_rcFrSky Taranis X9D Plus Special Edition TrailerFrSky RC2017-05-02 | Special Edition Specification: ● Gimbals: M9 Hall Sensor ● Stick Ends: Customized M4 CNC Aluminum Gimbal Stick Ends ● Shells: Carbon Fiber/ Blazing Skull/ Camouflage/ Rock Monster ● Antenna: Detachable SMA Antenna ● Switches: Upgraded Switches ● Eva Case
Product Description: ● Channels:16 channels/ up to 32 channels ● Battery capacity: 2000mAh ● Operating voltage: 6-15V( 2S 3S lipo are acceptable) ● Operating current: 270mAh maximum ● Operating temperature: -10 - 60 ℃ ● Backlight LCD screen: 212*64, Blue/White ● Model memories: 60 (extendable by SD card) ● Compatibility: FrSky X series, D series, L series receivers and V8-II series receiver (External module is compatible with other receivers)
Purchase here: http://www.frsky-rc.com/buynow.html FrSky Facebook: https://www.facebook.com/FrSkyRC/?hc_... FrSKy Instagram: instagram.com/frsky_rcFrSky tutorial video - XMR mini receiverFrSky RC2017-04-06 | FrSky XMR is a light and compact size receiver with built-in 6CH PWM outputs, it is appropriate for the indoor mini Fixed-Wing and park fly etc. This video includes the parts below: 1. How to bind 0:40 2. How to connect to Servo or ESC 2:35 3. How to update firmware 3:12 More details here: http://www.frsky-rc.com/media/mediaItem.php?m_id=53 Purchase here: http://www.frsky-rc.com/buynow.html FrSky Facebook: facebook.com/FrSkyRC/?hc_ref=NEWSFEED&fref=nf FrSKy Instagram: instagram.com/frsky_rcIntroduction to FrSky Horus X12S FrOS - Part 1FrSky RC2017-03-30 | This video shows users how to use the latest version of FrSky operating system – FrOS which is designed for Horus X12S. The tutorial video part 1 includes the parts below: · System Menu · Model Menu · Airplane · Glider · Helicopter · Multirotor Read more: http://frsky-rc.com/ad/X12S.html Shop Now: http://www.frsky-rc.com/buynow.htmlShow me your Taranis with the FrSky World by tagging your pics and videos!FrSky RC2017-03-02 | Calling all Taranis fans out there... Show me your Taranis! Share your Custom Taranis with the FrSky World by tagging your pics and videos with #showmeyourtaranis #frsky #frsky_rc #frskyrc #taranis
New user shop now: goo.gl/eVggtV FrSky Official Facebook page: facebook.com/FrSkyRC FrSky Official Instagram Page: instagram.com/frsky_rcFrSky Horus X12S 16 Channels Radio TrailerFrSky RC2017-02-17 | FrSky introduce the newest and most powerful radio, the horus x12s. The Horus is the new flagship radio from FrSky with premium gimbals, pots, switches and components. The radio also has a built in GPS module, speaker, haptic feedback and more. The X12S features a full color LCD screen with an easy to navigate UI system. Each radio comes with a high quality hard case for transportation. Read more: http://frsky-rc.com/ad/X12S.html Shop Now: http://www.frsky-rc.com/buynow.htmlHow to disable the spring loaded throttle stick on Taranis Q X7FrSky RC2017-01-20 | This video will show you how to disengage the centering stick on your throttle gimbal of the Taranis Q X7. You will need a small Phillips Head Screwdriver and a couple minutes. Make sure to turn off your X7 and remove the batteries before you attempt this.FrSky Horus X12S Quick Review and Flying Video by Quad Pilot TJ WilliamsFrSky RC2017-01-08 | Quad Pilot. First place for the 2016 season with Quad Race Group Ohio (QRGO). A good reviewer is well known as T-Bone. He made his first video for the event "who is the 5th". Below details of the event: Activity Information:FrSky’s latest radio control module, the Horus X12S, was just released in August, 2016. We’re excited to share this newest technology with all pilots! Because we deeply appreciate all the love and support shown to us by our many customers—pilots who have purchased our products and helps share what we have to offer. Because of this, we have a surprise for everyone. We are choosing one lucky guy to get our Horus X12S for absolutely free! We invite you to join us picking that lucky winner—or you could enter the contest yourself! (Link: horusrc.com/event )
·Data: Dec 8, 2016 – Jan 8, 2017 All over the world ·Official Organizer: FrSky Electronic Ltd., Co ·Technical Sponsor: horusrc.com
How to join? 1.Submit your name, address, and talk about your RC experience. 2.Attach some photos or a video of you in action! 3.After verifying the details you provided, we will give you a sharable link you can use to promote yourself and get more votes. 4.FrSky will award the person who gets the most votes a free Horus X12S. (PS: Only the qualified candidate will be chosen as a competitor, once you submit your information, you can’t modify your information any more, please be careful.) (Candidate Sign Up Link: https://www.horusrc.com/event/who-is-...) (Voter Sign Up Link: https://www.horusrc.com/event/custome... )
Donation and Charity: 1.As an added bonus, you can choose to donate in favor of your favorite entrant. All the money donated towards will go towards supporting the many projects of UNICEF (United Nations International Children’s Emergency Fund http://www.unicef.org ). 2.FrSky and HorusRC are one with that agency’s many initiatives to provide children the world over with clean water, milk, needed medicines, and so much more! It’s your chance to make a difference in a child’s life today. 3.All our efforts in this regard will be open to public scrutiny because we believe strongly in transparency. Have a cause close to your heart? Email us at frsky@frsky-rc.com and we can look over the suggestions. (Link: https://www.horusrc.com/event/who-is-... ) (PS: To those who donate, we will give you a bonus gift of same-value Points which you can then use to shop here at Horusrc.com!)
(We will protect your privacy. For specifics on how we do that, click here: Privacy Policy. FrSky Electronic Ltd., Co reserves the right to modify or alter any of the conditions contained herein.)FrSky Horus X12S Flying Video by Fixed-Wing Pilot Qun DONGFrSky RC2017-01-06 | Fixed-Wing Pilot, First place of China Aeromodelling Design Challenge (CADC). He made his first video for the event "who is the 5th".
Below details of the event: Activity Information:FrSky’s latest radio control module, the Horus X12S, was just released in August, 2016. We’re excited to share this newest technology with all pilots! Because we deeply appreciate all the love and support shown to us by our many customers—pilots who have purchased our products and helps share what we have to offer. Because of this, we have a surprise for everyone. We are choosing one lucky guy to get our Horus X12S for absolutely free! We invite you to join us picking that lucky winner—or you could enter the contest yourself! (Link: horusrc.com/event )
·Data: Dec 8, 2016 – Jan 8, 2017 All over the world ·Official Organizer: FrSky Electronic Ltd., Co ·Technical Sponsor: horusrc.com
How to join? 1.Submit your name, address, and talk about your RC experience. 2.Attach some photos or a video of you in action! 3.After verifying the details you provided, we will give you a sharable link you can use to promote yourself and get more votes. 4.FrSky will award the person who gets the most votes a free Horus X12S. (PS: Only the qualified candidate will be chosen as a competitor, once you submit your information, you can’t modify your information any more, please be careful.) (Candidate Sign Up Link: https://www.horusrc.com/event/who-is-...) (Voter Sign Up Link: https://www.horusrc.com/event/custome... )
Donation and Charity: 1.As an added bonus, you can choose to donate in favor of your favorite entrant. All the money donated towards will go towards supporting the many projects of UNICEF (United Nations International Children’s Emergency Fund http://www.unicef.org ). 2.FrSky and HorusRC are one with that agency’s many initiatives to provide children the world over with clean water, milk, needed medicines, and so much more! It’s your chance to make a difference in a child’s life today. 3.All our efforts in this regard will be open to public scrutiny because we believe strongly in transparency. Have a cause close to your heart? Email us at frsky@frsky-rc.com and we can look over the suggestions. (Link: https://www.horusrc.com/event/who-is-... ) (PS: To those who donate, we will give you a bonus gift of same-value Points which you can then use to shop here at Horusrc.com!)
(We will protect your privacy. For specifics on how we do that, click here: Privacy Policy. FrSky Electronic Ltd., Co reserves the right to modify or alter any of the conditions contained herein.)New FrSky Taranis Q X7 TrailerFrSky RC2017-01-05 | This is the latest powerful radio system from FrSky, the Taranis Q X7. This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. It runs on OpenTX and files can be shared with the popular X9D Plus Read more: goo.gl/8DtVMr Buy from our dealers: http://frsky-rc.com/buynow.htmlFrSky Redundancy Bus -10 ReviewFrSky RC2016-12-26 | The FrSky Redundancy Bus is a unique switchboard module that can operate 2 receivers and 2 batteries to provide you with total peace of mind when flying your model. You can also run your servos from the switchboard with complete protection from high voltage overload. The Redundancy Bus also supports Smart Port telemetry for your Taranis and will provide telemetry feedback for voltage and overload indication. Shop Now: http://frsky-rc.com/buynow.html
Specification: Recommended input voltage range: 4-8.4V Number of servos: up to 8 Operating temperature range: - 20~75°C Weight: 10g Dimension: 63x27x10.5mm
Feature: Overload protection on each channel and RXS Dual power dual receiver double guarantee (connect up to 2 batteries and 2 receivers) 50Hz mode of servo outputs (20ms period) or equal to the input of SBUS cycle Integrated S.Port telemetry feedbacks (including voltage, overload indication, etc) Servo signal output period settable High voltage servos supported Compact size and firmware upgradable