The Zett (The Z)
PS Vita: Z.H.P. Usermode Exploit for Firmware 3.18 (Hello World)
updated
In this video I also showcase an updated version of Despertar del Cementerio v8 (DC8/DDC8), which allows you to install M33 CFW via the BaryonSweeper pandora battery.
The old 5.00 M33-6 custom firmware is running on the PSP 3000, something that had not been possible in the past; back in the day it only supported the PSP 1000 & 2000 (non-v3)!
The 5.00 M33 is just novelty, it is of course still recommended to use a 6.60 or 6.61 custom firmware (LME CFW or PRO CFW) alongside Infinity 2.
Source github: github.com/balika011/DC-M33
Source twitter: twitter.com/balika011
If used alongside the official jigkick software it allows you to unbrick any PSP 1000, 2000, 2000v3 (TA-088v3) or PSP 3000!
While the old Pandora only worked with the 1000 and most 2000s, the new Baryon Sweeper also works with the PSP 3000, if it is a 3rd generation PSP 3000 (a PSP 3000 03g).
Shoutout to my good friend Freakler for providing the BaryonSweeper software and to my friends over at PSPX.ru for providing the jigkick software (fw 6.20), important instructions, for simply being great in general and much much more!
Infinity 2.0 will allow you to run a permanent patched 6.61 LME or 6.61 PRO Custom Firmware on your PSP (all models supported)!
More information are available on these websites:
http://wololo.net/2019/11/10/release-infinity-2-0-enables-permanent-6-6x-custom-firmware-for-all-psps
http://infinity.lolhax.org
twitter.com/DaveeFTW
Greetings Davee & The Z
OFW Files (X000 = 1000, 2000, 3000, E1000/Street):
FW 661 for PSP X000: sendspace.com/file/qfmevo
FW 661 for PSPgo: sendspace.com/file/6xrv0j
CFW Files (choose either LME or PRO):
6.61 LME-2.3: sendspace.com/file/7b0qtv
6.61 PRO-C2: sendspace.com/file/o0snfm
Chronoswitch v7: sendspace.com/file/rd3g0l
Infinity 2.0:
http://infinity.lolhax.org
TheFlow’s Modoru Downgrader allows you to downgrade your PS Vita to a previous Firmware, as long as it is currently running version 3.68 or older.
It requires a proper PS Vita memory card on the fat PS Vita (the slim may use its internal storage). SD2Vita cannot be used for this!
Support for Firmwares 3.69 & higher will be added in a future version (a public exploit entry point is currently missing on those FWs).
---------------------------------------------------------------------------------------------------------
GENERAL HELP: github.com/TheOfficialFloW/modoru
REQUIRED FILES:
H-Encore bubble (Tutorial): youtube.com/watch?v=i2ZJOoSEe3U
Modoru VPK file: github.com/TheOfficialFloW/modoru/releases
PS Vita FW Files (3.65): mega.nz/#!cZxlgILB!ye2KDvZz8SjvjkhE8VmAAuSWqwmpOZ0_HRDDpNseTLk
AFTER THE DOWNGRADE:
3.65 Enso (Tutorial): youtube.com/watch?v=DeulUrkKF7Y
---------------------------------------------------------------------------------------------------------
TheFlow’s Patreon: patreon.com/TheOfficialFloW
GENERAL HELP: github.com/TheOfficialFloW/h-encore
365 ENSO: github.com/TheOfficialFloW/enso/releases
TheFlow’s H-encore exploit is for PS Vita devices that are currently running Firmware 3.65, 3.67 or 3.68. The exploit will install HENkaku onto your PS Vita and requires a memory card on the fat PS Vita.
---------------------------------------------------------------------------------------------------------
GENERAL HELP: github.com/TheOfficialFloW/h-encore
Required files:
QCMA: codestation.github.io/qcma
PSVIMGTOOLS: github.com/yifanlu/psvimgtools/releases
PKG2ZIP: github.com/mmozeiko/pkg2zip/releases
H-ENCORE: github.com/TheOfficialFloW/h-encore/releases
DEMO: http://ares.dl.playstation.net/cdn/JP0741/PCSG90096_00/xGMrXOkORxWRyqzLMihZPqsXAbAXLzvAdJFqtPJLAZTgOcqJobxQAhLNbgiFydVlcmVOrpZKklOYxizQCRpiLfjeROuWivGXfwgkq.pkg
ACC ID CALC: http://cma.henkaku.xyz/
---------------------------------------------------------------------------------------------------------
TheFlow’s Patreon: patreon.com/TheOfficialFloW
TheFlow’s 3.65 HENkaku Enso Updater is for PS Vita devices that are currently running Firmware 3.60. The Updater will update the Vita’s system software from 3.60 to 3.65 and install a Custom Firmware alongside version 3.65.
Be sure to update VitaShell to v1.82 before you install the 3.65 Enso CFW, otherwise you will have problems with your device!
---------------------------------------------------------------------------------------------------------
Required files:
PS Vita FW 3.65: sendspace.com/file/gmw0d1
3.65 HENkaku Enso Updater: github.com/TheOfficialFloW/update365/releases/download/v1.0/updater.vpk
VitaShell version 1.82+: github.com/TheOfficialFloW/VitaShell/releases/download/1.82/VitaShell.vpk
FileZilla (optional): filezilla-project.org/download.php?type=client
This Custom Firmware is compatible with PS Vita fat, PS Vita slim & PS TV.
Wololo article: http://wololo.net/2017/07/29/release-henkaku-enso-custom-firmware-ps-vita
HENkaku enso website: https://enso.henkaku.xyz/
Filezilla: filezilla-project.org/download.php
QCMA: codestation.github.io/qcma
FW 3.60: nzxtrules.stackstorage.com/s/EjNBnT8myxlNnc1
This Custom Firmware is compatible with PS Vita fat, PS Vita slim & PS TV.
Wololo article: http://wololo.net/2017/07/29/release-henkaku-enso-custom-firmware-ps-vita
HENkaku enso website: https://enso.henkaku.xyz/
Filezilla: filezilla-project.org/download.php
PS Vita (Fat/Slim) with FW 3.60
HENkaku/TaiHENkaku
VitaShell v1.50 or newer
Thanks to TheFlow for making it possible to connect the Vita via USB (without requiring the CMA programm)!
http://wololo.net/2017/01/12/vitashell-updated-1-5-provides-usb-mass-storage-access
Wololo blogpost: http://wololo.net/2017/01/09/ark-3-60-released-also-works-3-613
Requirements:
PS Vita (Fat/Slim/TV) running exactly FW 3.60
One legit PSP game (full, Minis or Demo) from the PSN Store
Wifi connection on your Vita + PC
Being able to read :P
-------------------------------------------------------------------------------------------
Required links:
6.61 EBOOT.PBP file: http://dj01.psp.update.playstation.org/update/psp/image/jp/2014_1212_6be8878f475ac5b1a499b95ab2f7d301/EBOOT.PBP
Adrenaline fix2 files: http://www.mediafire.com/file/tk1f9u96lzkthno/adrenaline_fix2.zip
Instructions via GitHub: gist.github.com/TheOfficialFloW/0ed4e09e2d447e631416cb84d7c43107 (newest DL can usually be found on GitHub)
Greetings Zett
Vitamin enables you to dump PSV games into the VPK format, which can be installer via VitaShell to run legit PSV games as custom bubbles.
This basically enables piracy for PS Vita games.
Use at your own risk: bitbucket.org/TheOfficialFloW/vitamin/downloads (official version!)
P.S. My test-run on the Crunchyroll App did not work, because I did not dump the update files as well.
You have to dump update files as well, if your game has any.
The device requires HENkaku & a VHBL Bubble. Check out my previous videos to learn how to install those things.
Your PS Vita has to run firmware 3.60 to support this.
HENkaku instructions: youtube.com/watch?v=fGut2baHIKs
Additional informations (Via Wololo's blog): http://wololo.net/2016/07/29/tutorial-installing-vhbl-custom-bubble-via-henkaku-firmware-3-60
If the first PBOOT isnt working, try this one: http://www.mediafire.com/download/u7277u78a47x8p3/VHBL_pboot_unrestricted.zip
This Homebrew Enabler is a native PS Vita HEN and works with the system software 3.60 (the most recent one as of uploading this video).
HENkaku will allow you to access the complete file system of the PS Vita memory card and will of course allow you to install & use Homebrews on your Playstation Vita.
For more informations visit Wololo's Blog: http://wololo.net/tag/henkaku
-------------------------------------------------------------------------------------------------
Do not update to firmware 3.60, if you are currently running a lower firmware version.
Firmware 3.60 can not run TN-V, ARK-2 or the NATIVE(!) Rejuvenate Vita hack, that only works on a lower firmware! But it can run the VHBL :)
If you have the chance, stay on a lower firmware and enjoy using the ePSP hacks TN-V, ARK, the PSOne Loader and the native Rejuvenate Vita hack :)
Stay tuned!
The Infinity Hybrid Firmware will allow you to run a permanent patched 6.61 LME or 6.61 PRO Custom Firmware on your PSP 1000, 2000 (including 88v3!), 3000 or PSPgo!
The only PSP that is (currently) unsupported is the PSP E1000 (aka. PSP Street).
More information are available on these websites:
lolhax.org/2016/02/13/release-6-61-infinity
http://wololo.net/2016/02/11/psp-davees-infinity-project-is-close-to-be-finished
http://wololo.net/2016/02/14/release-davee-releases-project-infinity-6-61-permanent-patch-for-me-pro-cfws
Greetings Davee & The Z
OFW Files:
631-X000: sendspace.com/file/mjdwsy
661-X000: sendspace.com/file/qfmevo
631PSPgo: sendspace.com/file/pjplhx
661PSPgo: sendspace.com/file/6xrv0j
CFW Files:
6.61 LME-2.3: sendspace.com/file/7b0qtv
6.61 PRO-C2q: sendspace.com/file/8t3hh2
Chronoswitch v7: lolhax.org/davee/psp/chronoswitch/chronoswitch_7_0.rar
Infinity:
http://infinity.lolhax.org/index.php
Feel free to listen to the video or read my Wololo blogpost for additional information regarding Infinity.
Blogpost: http://wololo.net/2016/02/11/psp-davees-infinity-project-is-close-to-be-finished
Greetings Davee & The Z
-------------------------------------------------------------------------------------------------
Do not update to firmware 3.57, if you are currently running a lower firmware version.
Firmware 3.57 can not run TN-V, ARK-2 or the NATIVE(!) Rejuvenate Vita hack, that only works on a lower firmware! But it can run the VHBL :)
If you have the chance, stay on a lower firmware and enjoy using the ePSP hacks TN-V, ARK, the PSOne Loader and the native Rejuvenate Vita hack :)
Stay tuned!
This works with the Nintendo 2DS, 3DS, 3DSXL, New3DS & New3DSXL (regarding the New3DS devices, proceed with caution!).
Follow this easy tutorial: http://wololo.net/2016/01/04/3ds-system-software-downgrade-tutorial
Greetings Zett
This also works on 3.50, 3.51, 3.52 and ANY older firmware.
DO NOT UPDATE TO FIRMWARE 3.55!
Source: http://wololo.net/2015/10/09/qwikrazor87-releases-tn-v11-bubble-for-3-51-3-52-and-3-55-vita-firmwares
These are the precious Custom Bubbles of Qwikrazor :)
Your PS Vita has to run a Firmware between 3.00 and 3.52.
You CANNOT replicate this if your device is already on 3.55!
Additional information via my Blogpost: http://wololo.net/2015/10/04/tutorial-installing-qwikrazors-firmware-3-52-custom-bubbles-without-an-exploitable-psp-game
Download (for FW 3.50): http://pastebin.com/7RYdKdc6
Download (for FW 3.51/3.52): http://pastebin.com/JRk8jA1M
Donate to Qwikrazor: paypal.com/cgi-bin/webscr?cmd=_donations&business=CYQ6HM6EHZ7H6&lc=US&item_name=qwikrazor87¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted
Download (for FW 3.50): http://pastebin.com/7RYdKdc6
Download (for FW 3.51/3.52): http://pastebin.com/JRk8jA1M
Your PS Vita has to run firmware 3.52 or any older PS Vita firmware for this trick to work.
A PS Vita that currently runs firmware 3.55 CANNOT follow this tutorial!
-----------------------------------------------------------------------------------
You will need a few files, which are the following ones:
NotePad++: notepad-plus-plus.org/download/v6.8.3.html
Thunderbird: mozilla.org/en-GB/thunderbird
PBPUnpacker: http://dl.qj.net/psp/tools-utilities-on-pc/pbp-unpacker-v094.html
Custom Bubble setup: twitter.com/KanadeEngel/status/648752718467743744
Writer.eml: dl.dropboxusercontent.com/u/14112558/Stuff18/writer.zip
SQLiteBrowser: github.com/sqlitebrowser/sqlitebrowser/releases
PKG Viewer: http://www.qj.net/ps3/applications/pkgview-v13-windows-app-released.html
QCMA: http://codestation.github.io/qcma
Paint.net (Optional): http://www.getpaint.net/download.html#download
Maybe Winrar, 7-Zip or similar programms.
You will also need a Computer & an email address. - Oh, and a random PSP game (purchased/downloaded from the PSN Store)).
-----------------------------------------------------------------------------------
Important things from the tutorial to copy & paste (without the " symbols):
"email:send?attach=ur0:shell/db/app.db."
"ur0:shell/db/app.db"
-----------------------------------------------------------------------------------
Otherwise just follow the tutorial.
Zett
-------------------------------------------------------------------------------------------------
Do not update to firmware 3.55, if you are currently running a lower firmware version.
Firmware 3.55 can not run TN-V, ARK-2 or the NATIVE(!) Rejuvenate Vita hack, that only works on a lower firmware! But it can run the VHBL :)
If you have the chance, stay on a lower firmware and enjoy using the ePSP hacks TN-V, ARK, the PSOne Loader and the native Rejuvenate Vita hack :)
Stay tuned!
This new firmware 3.55 has patched a few things, but what exactly got patched, and what exactly is still working?
Let's find out!
--------------------------------------------------------------------------------------------------------------
The new Custom Bubbles work on PS Vita firmware 3.50, 3.51 & 3.52 (so far), and can enable you to play Homebrews, PSP games, launch the VHBL or even an eCFW (ARK-2 or TN-V, the latter only on less than 3.51).
The new Custom Bubbles for 3.5x will be released very soon, don't worry, this means that you all can use Custom Bubbles on your PS Vita devices.
The Custom Bubbles (Qwikrazor's) are also working on lower firmwares, such as 3.18 or 3.36, which means that you SHOULD NOT update to 3.50+, unless you already did it or unless you really have to.
Everything that works on 3.50+ does also work on 3.18/3.36, so dont throw away your golden Firmwares for a worse firmware (3.52/3.51/3.50).
Nonetheless, if you are already lost on 3.50+, then you can at least use these new cool Custom Bubbles of Qwikrazor.
--------------------------------------------------------------------------------------------------------------
For more information about them, watch this video, duuuuh, but also check out my article over at Wololo's Blog: wololo.net/2015/09/15/qwikrazors-sweets-custom-bubbles-for-firmwares-3-5x-to-be-released-soon
Greetings, The Z & Qwikrazor
The kernel mode exploit is necessary for using an eCFW on the PS Vita. The ARK-2 eCFW can do everything you guys want:
It can play PSP games (PSN & Custom), it can play (soundless, unfortunally) PS1 games (PSN & Custom), it can use Plugins (PSP & PS1) and even use pretty much any kind of PSP Homebrew (simple & even complex ones!).
In the end it is worth to mention that you **SHOULD NOT** update to firmwares 3.50, 3.51 or 3.52, unless you **really** have to.
Why? Because FW 3.18/3.36 offer you MUCH MORE than the much more secure Firmware 3.5x do. It is NOT worth it to update from 3.18/3.36 to 3.5x, unless you **really** have to.
Nonetheless, this eCFW will work with all PS Vita firmwares up to version 3.52. Any newer firmware will most likely block this kernel mode exploit, and therefore render you unable to use the ARK-2 eCFW.
So be sure to not update higher than 3.52 (assuming Sony releases a new Firmware in the next weeks).
-------------------------------------------------------------------------------------------------------------
In the end be sure to check out my blogpost over at Wololo's place, for additional information: http://wololo.net/2015/09/12/the-return-of-the-ark-2-ecfw-new-kernel-mode-exploit-for-firmware-3-52
**SUPER IMPORTANT!!!**
Be sure to give the big man behind the scene a tasty meal! - Developer Qwikrazor deserves so much for all the things he has done in the scene.
Dont be dicks, people, give that man a few of your dollars to show your appreciation of his work. He pretty much is taking care of this whole PS Vita (PSP Emulator stuff is what I am talking about) scene stuff by himself.
Qwikrazor's Paypal: paypal.com/cgi-bin/webscr?cmd=_donations&business=CYQ6HM6EHZ7H6&lc=US&item_name=qwikrazor87¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted
Once again via Qwikrazor's Method :)
You run these emulators like any other game you would have downloaded from the PSN store, as if it would be a genuine Playstation game :)
The eCFW only works on 3.50 & below! - 3.51/3.52 only has access to a highly limited VHBL!
This is pretty much an improved method of this exploit: youtube.com/watch?v=QmoBebZW8bU
3.50 ARK-2 eCFW for World of Pool: twitter.com/qwikrazor87/status/637692536421650432
3.50 ARK-2 eCFW for PoolHall Pro: twitter.com/qwikrazor87/status/637693954654253057
Additional information: http://wololo.net/2015/08/30/update-firmware-3-50-ark-2-ecfw-via-pool-exploit-games
Read this before you comment/complain: http://wololo.net/2015/08/28/final-statement-about-the-ps-vita-firmware-3-52-exploit-games-world-of-pool-poolhall-pro
Thanks Z
Pool Hall Pro (NA - 3,99$, currently discounted!)
Those are the new exploit games for Firmware 3.52 :)
A japanese exploit game will be announced as well, at a later date, though.
More information via Wololo's Blog:
http://wololo.net/2015/08/23/the-psn-now-features-the-official-wololos-exploit-discount-week-poolhall-pro-is-available-at-a-reduced-price
http://wololo.net/2015/08/21/psvita-3-52-exploit-epsp-pool-hall-pro-confirmed-real-no-release-date
http://wololo.net/2015/08/15/new-firmware-3-52-exploit-game-for-the-pal-region-psn-stores-announced-the-game-is
http://wololo.net/2015/08/15/new-exploit-game-announced-for-ps-vita-firmware-3-52-available-in-north-america
The required exploit titles, IronFall & YouTube, are available FREE OF CHARGE, you read right, they are free!
The 3DS YouTube application should be available in any Nintendo eShop for the 3DS, regardless of it being the European, North American or Japanese store.
The IronFall title seems to be only available in Europe.
You do not need both titles, but it is recommended to get both, if you can. You need at least the YouTube application, though.
Anything else you need to know can be found over at: http://wololo.net/2015/08/17/release-ironhax-youtubehax-for-nintendo-3ds-system-softwares-9-0-to-9-9
Thanks to Smealum and his friends for this awesome Nintendo 3DS hack! :)
Cost of the game: 1,19€
Availability: Europe, Australia, New Zeeland (maybe more?)
------------------------------------------------------------------------------------------------------------
This exploit was published by Xmax Katsu, and improved by our good old Qwikrazor (@qwikrazor87).
Online PSN-Store link for the game: store.playstation.com/#!/de-de/spiel/puzzle-scape/cid=EP4077-NPEZ00001_00-PUZZLESCAPEMINI0
Download 3.52 VHBL: http://zload.net/v2/archives/file/?id=2418003
Said PS Vitas were running a debug version of the most recent firmware 3.52. While we had to stop the recording, we still managed to show you some of its debug settings :)
As the icing on the cake, the device came with a Corpse Party - Blood Drive game installed (I NEED IT!), to be released in October 2015 :)
Usually you are limited to 3 stationary (TV Consoles - PS3/PS4) devices and 3 handheld (portables ones - PSP, PSPgo, PS Vita, PS VitaTV) devices... Usually...
The trick I showcase will allow you to circumvent said 3 device limit and extend it from 3 to virtually infinite devices.
The only requirements are:
- A working wifi connection (or LAN for PS3/PS4/PSvTV)
- Being able to follow instructions
- Being able to dump & restore the devices Nand/NOR flash (the hardest part!)
It does not matter if you use a software solution to dump the devices Nand/NOR flash, like I did with a PSP + CFW, or if you use a hardware modification, like the PS3 required back in the days.
Exactly these Hardware modifications are currently "a thing" for the Playstation 4, which enable you to read from & most likely even write to the PS4s NOR flash, enabling you to replicate this activation server "bypass" trick on a PS4.
Some companies are shamelessly advertising this cheap trick as "Playstation 4 Hack" or even worse, as "'Playstation 4 ``Jailbreak´´'".
This is neither a Hack, nor a crack, CFW, jailbreak or any irrelevant and not fitting term, it is simply a logical flaw in Sony's account/device activation process & an abuse.
The 3 easy steps are:
Activate device & download content until you are satisfied.
Dump Nand & then deactivate the device, thus freeing up its slot in your Account.
Restoring the Nand afterwards, re-enabling you to use the downloaded content, without actively wasting one of the three slots your PSN account has for each category: Stationary & handheld.
The PSP screen is reflecting as fuck, by the way. Praise proper glasses, that can also function as shades.
Keep in mind that this is still an early Proof of Concept, and can not yet use the VHBL.
It is also a Minis, which have had bad compatibility as of firmware 3.10 (and higher).
The game is only 1,19€, and therefore very cheap. Buy it at your own risk :)
Colour flasher example: http://www.mediafire.com/download/0181khezkzaeezc/NPEZ00001SCENE0_COLORFLASHER.zip
If this is the case, then this is the exact right video for you!
In the video I am goint to show you how to add Custom Firmware files to your PSP & how to install these Custom Firmware files, without the need of any USB cables or card reader.
The only things necessary are a working Wifi connection, and a bit of space on the memory stick (or internal storage) of the Playstation Portable.
----------------------------------------------------------------------------------------------------------------
If you have watched the video, then you now know how to install a CFW without additional hardware. You are most likely looking for a few quick links, right? Well, here they are:
Select your FW & PSP via http://www.zload.net/cfw
----------------------------------------------------------------------------------------------------------------
Additional informations:
All "ME CFWs" can ONLY be installed on a PSP 1000 (the old fat one), or most of the old PSP 2000s (the slimmer one, but without the 'better' screen). Use the LME if you happen to have a "newer PSP model".
All "LME CFWs" can be installed on any PSP device, regardless of model. Despite the LME CFW working on all PSPs, you might want to be informed that a few system software restrictions still apply, depending on your PSP model (listed below).
The permanent patch works on all PSPs that can have the system software 6.20 installed. It does not work on system software 6.30 or newer (6.39, 6.60, 6.61).
The LightSpeed mod does work on all PSP models, but does only work on system software 6.39, 6.60 and 6.61. LightSpeed does not exist for version 6.20, due to the permanent patch being available for 6.20.
Keep in mind that newer revisions of the PSP 2000 (Two-thousand!) CANNOT and MUST NOT use the ME CFW, since those newer 2000s have the same restrictions as the PSP 3000s, PSP E1000s or PSPgo.
Version 6.20 works with all PSP 1000s, all PSP 2000s, most PSP 3000s and all PSPgo. It does NOT work with the PSP E1000 or a few of the newest PSP 3000s.
Version 6.39 works with all PSPs, except for the PSP E1000.
Version 6.60 & 6.61 work with all PSPs, regardless of model.
----------------------------------------------------------------------------------------------------------------
I hope those were enough informations for you guys, and I wish you a lot of fun with flashing (the proper term ;)) - this means installing a CFW - your Playstation Portable device(s).
Feel free to visit my website, www.zload.net, for additional (PC requiring, though) downloads for the PSP, PSPgo and Playstation Vita.
Greetings, The Z
-------------------------------------------------------------------------------------------------
Do not update to firmware 3.52, if you are currently running a lower firmware version.
Firmware 3.52 can not run TN-V, ARK-2 or the NATIVE(!) Rejuvenate Vita hack, that only works on a lower firmware! But it can run the VHBL :)
If you have the chance, stay on a lower firmware and enjoy using the ePSP hacks TN-V, ARK, the PSOne Loader and the native Rejuvenate Vita hack :)
Stay tuned!
----------------------------------------------------------------------------------------------------------------
Keep in mind that this DOES NOT work on Firmwares 3.52 or newer (future firmwares).
It only works on FWs 1.00 - 3.51, while something inbetween 3.00 & 3.51 is recommended!
More informations are available via these articles:
FW restrictions: http://wololo.net/2015/06/24/ps-vita-firmware-3-52-is-out-revokes-psm-support-effectively-patching-the-rejuvenate-hack-do-not-update
Rejuvenate v0.2.1: http://wololo.net/2015/06/23/release-rejuvenate-0-2-1
Setup & necessary files: http://wololo.net/2015/06/21/vita-hack-rejuvenate-how-to-run-your-first-homebrew
Authors & Developers website: http://yifan.lu/p/rejuvenate/
This would force you to convert homebrews into the ISO format, which doesnt work with all homebrews.
Using the OneMenu method will enable you to play and add new homebrews onto your PS Vita, without dual-booting ARK or VHBL.
While this method is not 100% perfect, it enables you to add new homebrews and play them right from TN-V ('s recovery menu).
Download OneMenu: http://wololo.net/talk/viewtopic.php?t=42430
Cost of the game: Free (cause it is a demo) :D
Availability: Japan (maybe more?)
------------------------------------------------------------------------------------------------------------
This exploit was published by the japanese developer 173210 (twitter.com/173210).
Online PSN-Store link for the game: store.playstation.com/#!/ja-jp/%E3%82%B2%E3%83%BC%E3%83%A0/%E8%A8%8E%E9%AC%BC%E4%BC%9D-%E6%A5%B5-%E4%BD%93%E9%A8%93%E7%89%88%EF%BC%88psp%E7%89%88%EF%BC%89/cid=JP0106-NPJH90346_00-PKGTOUKIDENDEMO0
Download 3.51 VHBL (JP): http://zload.net/v2/archives/file/?id=2418000
-------------------------------------------------------------------------------------------------
Do not update to firmware 3.51, if you are currently running a lower firmware version.
Firmware 3.51 can not run TN-V, ARK-2 or any other hack that only works on a lower firmware! But it can run the VHBL :)
If you have the chance, stay on a lower firmware and use TN-V, ARK, the PSOne Loader and co :)
Stay tuned!
It does NOT work on 3.51 (or newer).
This little demonstration just shows how to launch the TN-V11 eCFW (by Total_Noob) with Ape Escape: On the Loose, if you decide to stay on 3.50, then you can use Ape Escape: On the Loose for the exploit.
Download (336) via: http://zload.net/v2/archives/file/?id=2417995
Download (350) via: http://zload.net/v2/archives/file/?id=2417996
Greetings Z
It does NOT work on 3.37 (or newer).
This little demonstration just shows how to launch the TN-V11 eCFW (by Total_Noob) with Numblast, if you decide to stay on 3.36, then you can use Numblast for the exploit.
Download via: http://zload.net/v2/archives/file/?id=2417991
Greetings Z
PSN store access as proof for 3.50 and PS1 sound playback as proof for TN-V :P
Download: http://wololo.net/talk/viewtopic.php?f=58&t=42318&p=386115#p386115
Qwikrazor has decided to release this unofficial port of TN-V11 for the firmware 3.36 :)
Download: http://zload.net/v2/archives/file/?id=2417990
Source: http://wololo.net/talk/viewtopic.php?f=58&t=42318&p=386115#p386115
You cant do this, if you do not have a hacked PSP (Any, except for the E1000!), PSPgo (any) or PS Vita (any).
FW 3.36 files: http://zload.net/v2/archives/file/?id=2417988
FW 3.50 files: http://zload.net/v2/archives/file/?id=2417989
138Menu L4: mediafire.com/download/ad9oszo159m2e41/138MenuL4.rar
Tutorial how to install homebrews with the 138Menu: youtube.com/watch?v=-vkPtOa4_X4 (this also works on 3.50, as long as you use the 138Menu)


