#414: How to use an SV4401A VNA to tune a duplexer @w2aew

#414: How to use an SV4401A VNA to tune a duplexer @w2aew

Uploaded July 2026 | Updated September 2026, 2 weeks ago

This video shows how to setup a Sysjoint SV4401A Handheld Vector Network Analyzer to analyze the tuning adjustments on a band-reject duplexer.

#414: How to use an SV4401A VNA to tune a duplexer

#317: NanoVNA Port Extension using the Electrical Delay setting

W2AEW channel update and thanks.

#290: Vintage Tech: Tektronix 576 Curve Tracer

#368: Overview of the Peak Atlas DCA Pro Model DCA75 Semiconductor Component Analyzer & Curve Tracer

#234: Basics of Near Field RF Probes | E-Field & H-Field | How-to use

#241: Field Day 2016 - Low Power operating from a historic Marconi site

#258: Repair Log: Yaesu FT-736R re-cap of internal power supply | replace electrolytic capacitors

#410: How to update the firmware on the SV4401A handheld VNA from Sysjoint / Chelegance

#321: Vintage Tech: The Simpson 260 VOM Volt-Ohm-Milliammeter family

#375: Ham Radio Quickie: Ground Radial wires vs. the Magic Carpet Faraday cloth

#285: Amateur Radio Field Day 2018 - my 5 watt setup with on-air contacts from Marconi Park

#414: How to use an SV4401A VNA to tune a duplexer