Necrobioarchetype
First observation of flexible use of a tool by cow
updated
Intelligent miniature systems capable of wireless sensing and manipulation hold considerable promise for advancing biomedical applications. However, the development of these systems has been substantially hindered by sensing-actuation incompatibility at small scales. To overcome this challenge, we propose a robotic sensing approach that integrates embedded ultrasonic soft sensors (EUSSs) with magnetic actuators, resulting in a wireless sensor-integrated miniature machine with seamless integration and minimal interference between fields. The EUSS, with its compact dimensions (1.3 millimeters by 1.3 millimeters by 1.6 millimeters), softness (98 kilopascals), and lightweight design (4.6 milligrams), is compatible with both soft and rigid components in terms of deformability and size. By engineering onboard transducers and using passive ultrasound communication along with external magnetic fields, we could wirelessly detect and regulate environmental parameters such as force, vibration, viscosity, and temperature. Demonstrations in rabbit and porcine models show the potential for robotic feedback control, accurate drug dosing, and in situ physiological monitoring, paving the way for real-world applications of intelligent miniature machines.
Xurui Liu et al. Science Robotics, 17 Sep 2025, Vol 10, Issue 106.
DOI: 10.1126/scirobotics.adu4851
This fundamental study demonstrates how a left-right bias in the relationship between numerical magnitude and space depends on brain lateralization. The evidence is compelling and will be of interest to researchers studying numerical cognition, brain lateralization, and cognitive brain development more broadly.
Abstract
Humans order numerosity along a left-to-right mental number line (MNL), traditionally considered culturally rooted. Yet, some species at birth show spatial-numerical associations (SNA), suggesting neural origins. Various accounts link SNA to brain lateralization but lack evidence. We investigated brain lateralization effects on numerical spatialization in 100 newborn domestic chicks. In ovo light exposure yielded strongly lateralized brains in half the chicks and weakly lateralized in the other half. Chicks learned to select the 4th item in a sagittal array. At the test, the array was rotated 90°, with left and right 4th items correct. Strongly lateralized chicks outperformed weakly lateralized ones when ordinal and spatial cues were reliable (experiment 1), but not with unreliable spatial cues (experiment 2). Moreover, only strongly lateralized chicks showed left-to-right directionality, suggesting the right hemisphere’s key role in integrating spatial and numerical cues. We demonstrate that brain lateralization is fundamental for developing a left-to-right oriented SNA.
Rosa Rugani, Matteo Macchinizzi, Yujia Zhang, Lucia Regolin (2025) Prenatal light exposure affects number sense and the mental number line in young domestic chicks eLife 14:RP106356. doi.org/10.7554/eLife.106356.3
• Tool-naive carrion crows can learn to use stick tools
• Pose estimation shows that tool-use precision is refined by reinforcement learning
• Performance suggests crows integrate the tool into their peripersonal space
Summary
Tool use is rare in the animal kingdom but relatively common among dexterous generalists such as primates, parrots, and corvid songbirds. New Caledonian (NC) crows, known for their instinctive tool-making abilities, have long intrigued researchers; however, the motor-cognitive skills underlying these behaviors—such as the level of cause-and-effect understanding and precise yet flexible motor control—remain unresolved. To investigate how learning shapes these skills, we studied carrion crows, an NC-crow-related corvid species with similar cognitive abilities but no tool-use-specific adaptations. We trained three tool-naive carrion crows to use a beak-held stick to retrieve food pellets from a transparent Plexiglas crack in an automated apparatus. Utilizing computational pose estimation, we tracked the crows’ development of stick tool skills over thousands of trials. Our findings demonstrate that tool-naive carrion crows learn to handle tools with impressive skill, achieving dexterity similar to habitual tool users like NC crows. More notably, we observed that all the crows developed efficient, unique, and goal-directed movement patterns. Even after extensive training, the crows retained a remarkable level of flexibility, swiftly correcting errors and adjusting the orientation of the stick to maintain precise alignment. Our findings suggest that reinforcement learning alone can foster skilled tool use in dexterous, cognitively flexible corvids. This implies that only modest evolutionary changes—such as a predisposition to maneuver elongated objects when exploring crevices—may be needed to transform dexterous generalists into habitual tool users.
Felix W. Moll, Julius Würzler, Andreas Nieder. Learned precision tool use in carrion crows. Current Biology, 2025, ISSN 0960-9822, doi.org/10.1016/j.cub.2025.08.033
S2 Video. Museum specimen of a Phoebis philea butterfly in avian RNL false colors.
S3 Video. Museum specimen of an Anteos sp. butterfly in avian RNL false colors.
S4 Video. Iridescent peacock feather through the eyes of 4 different animals.
S5 Video. A butterfly in Apis vision.
S6 Video. A caterpillar’s anti-predator display in Apis vision.
S7 Video. A rainbow through the eyes of 4 different animals.
S8 Video. Application of sunscreen in Apis vision.
S9 Video. Close-up video of a leaf-footed bug egg in Apis vision.
S10 Video. A jumping spider in Apis vision.
S11 Video. A northern mockingbird (Mimus polyglottos) in avian vision.
S12 Video. Bees foraging and interacting on flowers in Apis vision.
Abstract
Plants, animals, and fungi display a rich tapestry of colors. Animals, in particular, use colors in dynamic displays performed in spatially complex environments. Although current approaches for studying colors are objective and repeatable, they miss the temporal variation of color signals entirely. Here, we introduce hardware and software that provide ecologists and filmmakers the ability to accurately record animal-perceived colors in motion. Specifically, our Python codes transform photos or videos into perceivable units (quantum catches) for animals of known photoreceptor sensitivity. The plans and codes necessary for end-users to capture animal-view videos are all open source and publicly available to encourage continual community development. The camera system and the associated software package will allow ecologists to investigate how animals use colors in dynamic behavioral displays, the ways natural illumination alters perceived colors, and other questions that remained unaddressed until now due to a lack of suitable tools. Finally, it provides scientists and filmmakers with a new, empirically grounded approach for depicting the perceptual worlds of nonhuman animals.
Vasas V, Lowell MC, Villa J, Jamison QD, Siegle AG, Katta PKR, et al. (2024) Recording animal-view videos of the natural world using a novel camera system and software package. PLoS Biol 22(1): e3002444. doi.org/10.1371/journal.pbio.3002444
Video of a 0.5-cm-sided sample moving when illuminated from below with a white LED (750 W m−2 in the sample plane) an air pressure of 26.7 Pa.
Supplementary Video 2
Video of a 1-cm-sided sample moving when illuminated from below with a white LED and above from the halogen lamp (760 W m−2 in the sample plane) at an air pressure of 5.3 Pa.
Supplementary Video 3
Video of a 1-cm-wide hexagonal sample moving when illuminated from above with a 447-nm laser (820 W m−2 in the sample plane) at an air pressure of 5.3 Pa.
Supplementary Video 4
Side-view video of a 0.5-cm-sided moving when illuminated from below with a 447-nm laser (intensity not measured) at an air pressure of 5.3 Pa.
Supplementary Video 5
Top-down video of a 0.5-cm-sided moving when illuminated from below with a 447-nm laser (intensity not measured) at an air pressure of 5.3 Pa.
Abstract
Lightweight nanofabricated structures could photophoretically loft payloads in near-space. Proposed structures range from microscale engineered aerosols1, to centimetre-scale thin disks with variations in surface accommodation coefficients2,3, to sandwich structures with nanoscale thickness4,5 that might be extended to metre-scale width6,7. Quantitative understanding of how structural and surface properties determine photophoretic lofting forces is necessary to develop a practical flying device. Here we focus on thermal transpiration as the most promising photophoretic mechanism for lofting large devices8 and present a hybrid analytical–numerical model of the lofting force on a structure that consists of two perforated membranes spaced a small distance apart. We identify optimal structural parameters, including device size, membrane perforation density and distribution of the vertical ligaments that connect the two membranes, each as a function of atmospheric altitude. Targeting these optimal parameters, we fabricate structures with a heterogeneous ligament distribution, which efficiently compromises between structural rigidity and photophoretic performance. We measure how lofting forces generated by these structures depend on pressure using gases with three different molecular weights. We observed photophoretic levitation of a 1-cm-wide structure at an air pressure of 26.7 Pa when illuminated by 750 W m−2, about 55% the intensity of sunlight. Lastly, we describe the preliminary design of a 3-cm-radius device with 10-mg payload capacity at 75-km altitudes and discuss horizontal motion control, overnight settling, and applications in climate sensing, communications and Martian exploration.
Schafer, B.C., Kim, Jh., Sharipov, F. et al. Photophoretic flight of perforated structures in near-space conditions. Nature 644, 362–369 (2025). doi.org/10.1038/s41586-025-09281-8
Video S2. Small aggregation of Rhyacoglanis paranensis at a shaded stretch, climbing a vertical rocky platform in the Diamantes waterfall during the day, at the town of Rochedo municipality, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil.
Video S3. Massive aggregation of Rhyacoglanis paranensis at night, climbing rocks at the margins of the Sossego waterfall, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil. Specimens can be seen above each other, climbing the large cluster of fish.
Video S4. Massive aggregation of Rhyacoglanis paranensis at night, climbing vertical rocky walls at the margins of the Sossego waterfall, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil.
Video S5. Specimen of Rhyacoglanis paranensis attached upside down to the rocks, at the margins of the Sossego waterfall, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil.
Video S6. Specimens of Rhyacoglanis paranensis climbing our plastic pail that was left at the margins of the Sossego waterfall, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil.
Video S7. Specimens of Characidium cf. zebra climbing a vertical rocky platform along with specimens of Rhyacoglanis paranensis in the Diamantes waterfall during the day, at the town of Rochedo municipality, Aquidauana River, Paraguay river basin, Mato Grosso do Sul State, Brazil.
Abstract
Rhyacoglanis are small catfish species of the family Pseudopimelodidae, Siluriformes, commonly known as bumblebee catfishes. Despite their broad distribution, the species are rare, and little is known about their biology and behaviour. Here, we report, for the first time, a remarkable massive aggregation and migratory and climbing behaviour of Rhyacoglanis paranensis. These findings highlight the importance of field observations in understanding small migratory fishes' ecological role and conservation needs, particularly in the context of potential threats posed by habitat fragmentation and river damming.
Manoela M. F. Marinho et al. Journal of Fish Biology. First published: 08 August 2025. doi.org/10.1111/jfb.70158
Movie S2. Kinesin (DmKHC (1-421)-SNAP-tag-6xHis) track in a motor-PAINT glutaraldehyde-fixed U2OS cell showing side-stepping.
Movie S3. Kinesin (DmKHC (1-421)-SNAP-tag-6xHis) track in a motor-PAINT U2OS cell at low ATP concentration.
Movie S4. Kinesin (DmKHC (1-421)-SNAP-tag-6xHis) track in a motor-PAINT U2OS cell at low ATP concentration showing zigzag motions.
Movie S5. Full-length kinesin-1 (HaloTag-KIF5B) motilities in a live U2OS cell, acquired by a standard fluorescence microscope. Note that for MINFLUX tracking, we selected cells with lower kinesin expressions than in this video, exhibiting only several kinesins within the field of view.
Movie S6. Full-length kinesin-1 (HaloTag-KIF5B) track in a live U2OS cell showing clear walking steps and side-stepping.
Movie S7. Full-length kinesin-1 (HaloTag-KIF5B) track in a live U2OS cell showing back slipping and sidestepping.
Movie S8. Kinesin (HaloTag-K560) motility in a live U2OS cell with Taxol treatment, acquired by a standard fluorescence microscope. Note that for MINFLUX tracking, we selected cells with lower kinesin expressions than in this video, exhibiting only several kinesins within the field of view.
Movie S9. Kinesin (HaloTag-K560) track in a live U2OS cell with Taxol treatment, showing clear walking steps.
Movie S10. Kinesin (HaloTag-K560) 3D track in a live U2OS cell with Taxol treatment acquired by 3D MINFLUX tracking.
Zeroing in on motor proteins
The super-resolution microscopy technique MINFLUX enables localization of fluorophores using a minimal number of photons. Two studies now expand on the development and implementation of MINFLUX to track motor protein dynamics in vitro and in cells (see the Perspective by Fei and Zhou). Wolff et al. refined the precision of MINFLUX such that single-fluorophore tracking with nanometer precision was possible with only tens of photons. They tracked the movement of kinesin-1 on microtubules and were able to see individual 4-nanometer substeps and rotation of the protein during stepping in their analysis. Deguchi et al. applied MINFLUX with a labeling and tracking approach called motor-PAINT to monitor stepping of motor proteins on microtubules in living and fixed cells in both two and three dimensions.
Abstract
Dynamic measurements of molecular machines can provide invaluable insights into their mechanism, but these measurements have been challenging in living cells. Here, we developed live-cell tracking of single fluorophores with nanometer spatial and millisecond temporal resolution in two and three dimensions using the recently introduced super-resolution technique MINFLUX. Using this approach, we resolved the precise stepping motion of the motor protein kinesin-1 as it walked on microtubules in living cells. Nanoscopic tracking of motors walking on the microtubules of fixed cells also enabled us to resolve the architecture of the microtubule cytoskeleton with protofilament resolution.
Takahiro Deguchi et al. Science. 9 Mar 2023, Vol 379, Issue 6636, pp. 1010-1015. DOI: 10.1126/science.ade2676
• Weaver ants combine into chains to pull leaves together when nesting
• Unlike humans, force output per capita increases with team size (superefficiency)
• Could be a force ratchet: active pullers store force in chains of passive resisters
• Division of labor within chains enables ants to counter Ringelmann effect
Summary
Teamwork is often assumed to enhance group performance, particularly for physical tasks. However, in both human and non-human animal teams, the effort contributed by each member may, in fact, decrease as team size grows. This counterintuitive phenomenon, known as the Ringelmann effect, is generally ascribed to poor coordination or differences in motivation. Weaver ants (Oecophylla smaragdina) display some of the most impressive feats of teamwork in the natural world, including self-assembly into pulling teams that fold leaves into nesting chambers. Here, we investigated whether weaver ant pulling teams suffer from the Ringelmann effect by measuring the force that weaver ant teams of varying sizes produce during nest construction. The average force contribution per individual almost doubled as team size increased, demonstrating that weaver ants not only avoid the Ringelmann effect but achieve the opposite—they are “superefficient” team workers. We propose that this superefficiency is facilitated by a division of labor within teams: “active pullers” work together to generate a pulling force that is stored in chains of “passive resisters,” which capitalize on the remarkable frictional strength of weaver ant attachment organs; weaver ant teams thereby act as a “force ratchet.” Our results highlight a novel mechanism of teamwork in a highly coordinated natural system and may inspire optimization algorithms for superefficient teams in distributed artificial systems, including swarm robotics.
Madelyne Stewardson, Daniele Carlesso, David Labonte, Chris R. Reid.
Current Biology, 2025, ISSN 0960-9822. doi.org/10.1016/j.cub.2025.07.038
Understanding when and how often seabirds excrete at sea is important for understanding their potential influence on marine ecosystems. Whales are known to redistribute nutrients through excretion, the ‘whale pump’. Large and widespread populations of seabirds could similarly shape key pelagic ecosystem processes, but such effects cannot be evaluated without basic data on their excretion behavior. Because of the challenges of observing seabirds traveling over the open sea, current knowledge of such effects is restricted to the terrestrial environment, and their excretion characteristics in open ocean are almost entirely unknown. Here, we report our observations of excretions of streaked shearwaters (Calonectris leucomelas) in the open ocean made using a belly-mounted video camera. The streaked shearwaters exhibited a marked tendency to avoid excretion while floating on the sea surface and consistently excreted during flight. Excretion timings showed periodicity, occurring every 4–10 min during daylight hours with inter-event intervals varying within a few minutes. Streaked shearwaters excreted approximately 5% of their body mass per hour, potentially substantial enough to influence flight energetics. Our study opens a path toward evaluating seabirds’ contributions to regional nutrient cycles and their epidemiological interactions within marine ecosystems.
Leo Uesaka, Katsufumi Sato. Current Biology, Volume 35, Issue 16, 2025, Pages R795-R796, ISSN 0960-9822. doi.org/10.1016/j.cub.2025.06.058
Abstract
Assembling increasingly larger-scale defect-free optical-tweezer-trapped atom arrays is essential for quantum computation and quantum simulations based on atoms. Here, we propose an AI-enabled, rapid, constant-time-overhead rearrangement protocol, and we experimentally assemble defect-free 2D and 3D atom arrays with up to 2024 atoms with a constant-time cost of 60 ms. The AI model calculates the holograms for real-time atom rearrangement. With precise controls over both position and phase, a high-speed spatial light modulator moves all the atoms simultaneously. This protocol can be readily used to generate defect-free arrays of tens of thousands of atoms with current technologies and become a useful toolbox for quantum error correction.
Rui Lin et al. Physical Review Letters. 135, 060602 – Published 8 August, 2025.
DOI: doi.org/10.1103/2ym8-vs82
physics.aps.org/articles/v18/148
Characterization of differential adhesion of live remoras to soft and hard substrates.
Supplementary Video 2
Finite element analysis of underwater adhesion on stomach tissue, comparing a furled adhesive disc with compartments, an unfurled adhesive disc with compartments and a benchmark one-piece adhesive disc without compartments.
Supplementary Video 3
Actuation of temperature-responsive nitinol lamellae.
Supplementary Video 4
Shear sliding of parallel-angled MUSAS design.
Supplementary Video 5
Underwater and wet adhesion of MUSAS on various soft substrates.
Supplementary Video 6
MUSAS resistance to dynamic interference.
Supplementary Video 7
In vivo adhesion of MUSAS to different parts of the swine GI tract.
Supplementary Video 8
Adhesion of MUSAS to different parts of a tilapia body.
Supplementary Video 9
Underwater MUSAS-enabled kinetic temperature sensing, and swimming tests with MUSAS-adhered tilapia.
Abstract
Achieving long-term underwater adhesion to dynamic, regenerating soft substrates that undergo extreme fluctuations in pH and moisture remains a major unresolved challenge, with far-reaching implications for healthcare, manufacturing, robotics and marine applications. Here, inspired by remoras—fish equipped with specialized adhesive discs—we developed the Mechanical Underwater Soft Adhesion System (MUSAS). Through detailed anatomical, behavioural, physical and biomimetic investigations of remora adhesion on soft substrates, we uncovered the key physical principles and evolutionary adaptations underlying their robust attachment. These insights guided the design of MUSAS, which shows extraordinary versatility, adhering securely to a wide range of soft substrates with varying roughness, stiffness and structural integrity. MUSAS achieves an adhesion-force-to-weight ratio of up to 1,391-fold and maintains performance under extreme pH and moisture conditions. We demonstrate its utility across highly translational models, including in vitro, ex vivo and in vivo settings, enabling applications such as ultraminiaturized aquatic kinetic temperature sensors, non-invasive gastroesophageal reflux monitoring, long-acting antiretroviral drug delivery and messenger RNA administration via the gastrointestinal tract.
Kang, Z., Gomez, J.A., Ross, A.M. et al. Mechanical underwater adhesive devices for soft substrates. Nature (2025). doi.org/10.1038/s41586-025-09304-4
Natural musculoskeletal systems combine soft tissues and rigid structures to achieve diverse mechanical behaviors that are both adaptive and precise. Inspired by these systems, we propose a programming method for designing bioinspired soft-rigid robotic structures using lattice geometries made from a single material. By introducing previously unknown approaches to the geometric design of unit cells within lattice structures—based on continuous blending and superposition of existing lattice geometries—we can precisely tune stiffness and anisotropy. These designs enable the creation of three-dimensional structures with spatially varying mechanical properties, ranging from tissue-like compliance to rigid, bone-like load-bearing capabilities. Using these methods, we fabricated a musculoskeletal-inspired tendon-driven robotic elephant that integrates joints with programmable bending profiles, achieving a continuously soft trunk. Our lattice geometry generation techniques allow for over 1 million discrete configurations and infinite geometric variations, offering a scalable solution for designing lightweight, adaptable robots.
Qinghua Guan, Benhui Dai, Hung Hon Cheng, and Josie Hughes. Science Advances. 16 Jul 2025. Vol 11, Issue 29.
DOI: 10.1126/sciadv.adu9856
Surgical robots capable of autonomously performing various tasks could enhance efficiency and augment human productivity in addressing clinical needs. Although current solutions have automated specific actions within defined contexts, they are challenging to generalize across diverse environments in general surgery. Embodied intelligence enables general-purpose robot learning with applications for daily tasks, yet its application in the medical domain remains limited. We introduced an open-source surgical embodied intelligence simulator for an interactive environment to develop reinforcement learning methods for minimally invasive surgical robots. Using such embodied artificial intelligence, this study further addresses surgical task automation, enabling zero-shot transfer of simulation-trained policies to real-world scenarios. The proposed method encompasses visual parsing, a perceptual regressor, policy learning, and a visual servoing controller, forming a paradigm that combines the advantages of data-driven policy and classic controller. The visual parsing uses stereo depth estimation and image segmentation with a visual foundation model to handle complex scenes. Experiments demonstrated autonomy in seven game-based skill training tasks on the da Vinci Research Kit, with a proof-of-concept study on haptic-assisted skill training as a practical application. Moreover, we conducted automation of five surgical assistive tasks with the Sentire surgical system on ex vivo animal tissues with various scenes, object sizes, instrument types, and illuminations. The learned policies were also validated in a live-animal trial for three tasks in dynamic in vivo surgical environments. We hope this open-source infrastructure, coupled with a general-purpose learning paradigm, will inspire and facilitate future research on embodied intelligence toward autonomous surgical robots.
Yonghao Long et al. Science Robotics. 16 Jul 2025. Vol 10, Issue 104.
DOI: 10.1126/scirobotics.adt3093
We instinctively know our hands and legs belong to us when we see them. This perception, known as the sense of body ownership, is a fundamental aspect of self-consciousness. Although studies show that this sense exists in some mammals, such as humans, monkeys, and rodents, research on its existence in non-mammalian animals is still lacking. In this study, we used the rubber hand illusion to demonstrate that an octopus, an invertebrate (cephalopod mollusk), also experiences body ownership of its arms.
Sumire Kawashima, Yuzuru Ikeda. Current Biology. Volume 35, Issue 14, pR702-R703, July 21, 2025. doi.org/10.1016/j.cub.2025.05.017
Transitioning from horizontal surfaces to vertical walls is crucial for terrestrial robots to navigate complex environments. Replicating such impressive surface transitions in artificial insect-scale robots has been particularly challenging. Here, innovative control schemes are introduced that enable ZoBorg (a cyborg beetle from Zophobas morio) to successfully climb walls from horizontal planes. The flex-rigid structure, flexible footpads, sharp claws, and embedded sensors of the living insect enable ZoBorg to achieve agile locomotion with exceptional adaptability, all at low power and low cost. ZoBorg crosses low-profile obstacles (5 and 8 mm steps) with a success rate exceeding 92% in less than one second. Most importantly, electrical stimulation of the elytron enables Zoborg to transition onto vertical walls with a success rate of 71.2% within 5 s. ZoBorg has potential applications for search and rescue missions due to its ability to traverse complex environments by crossing various obstacles, including low-profile steps, inclines, and vertical walls.
Lachlan Fitzgerald et al. Advanced Science. First published: 05 June 2025, e02095. doi.org/10.1002/advs.202502095
Early designs for lower limb prosthetics focused on restoring basic movement. There have been advances enabling greater functionality, but these systems are still based on preprogrammed motions using limbs physically separated from the body. Shu et al. hypothesized that if connections could be formed between the soft and hard tissues and the lower leg prosthetic, then this would lead to greater stability and interfacing with the nervous system and enable more flexible and dynamic control (see the Perspective by Fisher). The authors demonstrated this concept by combining an above-knee prosthetic with an osseointegrated mount and an implanted control system to myoelectrially control the knee joint. With minimal training, the additional feedback provided to and from the knee made it easier for test subjects to avoid obstacles. —Marc S. Lavine
Structured Abstract
INTRODUCTION
Attempts to restore the body after amputation have been widespread for centuries. Typical approaches have emphasized iterative mechanical improvements, which have resulted from the difficulties and cultural aversions associated with surgical revision. Today, the most advanced, commercially available lower-extremity prostheses are still physically separated from the body and only capable of repetitive walking patterns and preprogrammed movements. By contrast, recent studies show that providing even a modest amount of neuromuscular information to the prosthesis through a minimally invasive bionic interface can unlock essential lower-extremity capabilities, such as terrain adaptation, obstacle avoidance, and biomimetic power generation. The results suggest that further anatomical integration may yield additional legged agility.
RATIONALE
We hypothesized that engineering residual soft and hard tissues toward a seamless interface between the nervous system and prosthesis would enable versatile lower-extremity behaviors driven by user intent. We developed a vertically integrated bionic amputation platform, the osseointegrated mechanoneural prosthesis, to improve control signal detection and neuromuscular function at the above-knee amputation level. The osseointegrated mechanoneural prosthesis consists of three functional layers that seek to (i) maximize prosthetic knee agility through continuous, user-controlled flexion and extension; (ii) stabilize two-way energy and information exchange between user and prosthesis through a bone-anchored femur implant; and (iii) restore physiological neuromuscular signaling by reconstructing original muscle geometries.
RESULTS
Two human subjects with preexisting conventional transfemoral amputation were surgically enhanced with the osseointegrated mechanoneural prosthesis. We found that they demonstrated significantly improved performance relative to a cohort of subjects with conventional transfemoral amputation when controlling a bionic knee to avoid obstacles while walking. We determined that this advantage may be attributable to their reconstructed residual knee muscles, the improved control-signal quality from the permanently implanted electrodes within their muscles, and the lack of prosthetic socket interference. Our testing also developed a versatile prosthetic knee controller capable of computationally mirroring the user’s phantom limb movements when utilized by the osseointegrated mechanoneural prosthesis. Furthermore, we demonstrated that increasing anatomical prosthetic integration in subjects with preexisting amputation can enhance prosthetic embodiment, uncovering a self-perceptive metric to more thoroughly assess the outcomes of amputation design and prosthesis selection.
CONCLUSION
Our results suggest that increased prosthetic integration at the above-knee amputation level can yield improved signaling and joint control in certain physical tasks. We posit that the capabilities demonstrated by the osseointegrated myoneural prosthesis provide evidence that further anatomical integration with the prosthesis, rather than the maintenance of an artificial separation, is required for advancing progress toward physiological function, embodiment, and rehabilitative potential after limb loss.
Tony Shu et al. Science. 10 Jul 2025. Vol 389, Issue 6756.
DOI: 10.1126/science.adv3223
“Without this cushioning, hitting the water at 100 km/h would cause a massive impact — likely strong enough to break bones or even be fatal,” says Dr Inada.
Dr Yoshinobu Inada, a professor in the Department of Aeronautics and Astronautics at Tokai University Japan. Society for Experimental Biology Annual Conference in Antwerp, Belgium on the 10th July 2025.
Quadruped robots are widely used for exploring unknown terrains due to their biomimetic characteristics and high flexibility. To accomplish more complex tasks and better adapt to dynamic environments, recent studies have increasingly focused on quadruped robots with configurable shapes and adaptable motion patterns. Motivated by this concept, this article presents a novel quadruped robot, the Fold Walker, which features an origami-inspired leg design that supports a variety of motion patterns. With each leg containing two rotational folds, the robot can transform from a flat 2D configuration into complex 3D poses, which enable flexible walking on flat surfaces and stable crawling on uneven terrains. When navigating through narrow channels, the robot can also reduce its body width by changing its motion pattern. Additionally, it can transform its leg shapes to grasp objects while walking. Moreover, the origami-inspired trunk and legs of Fold Walker can be one-shot 3D printed as a unified, rigid link-based structure, greatly simplifying the assembly process. Finally, experiments are also carried out, successfully verifying the robot's multifunctional performance and its adaptability to complex environments.
Yilun Sun. Advanced Robotics Research. First published: 30 May 2025. doi.org/10.1002/adrr.202500087
Tongue-nibbling is a rare and previously undocumented affiliative behaviour in free-ranging killer whales (Orcinus orca), until now seen only in individuals under human care. This study presents the first recorded observation of tongue-nibbling between two wild killer whales in the Kvænangen fjords, Norway. The interaction, captured opportunistically by citizen scientists during a snorkelling expedition, lasted nearly two minutes and involved repeated episodes of gentle, face-to-face oral contact. This behaviour closely resembles sequences observed and described in detail in zoological settings, suggesting that it forms part of the species’ natural social repertoire. The observation also supports the interpretation of tongue-nibbling as a socially affiliative behaviour, likely involved in reinforcing social bonds, particularly among juveniles. The prolonged maintenance of this interaction in managed populations originating from geographically distinct Atlantic and Pacific lineages further indicates its behavioural conservation across contexts. This finding underscores the importance of underwater ethological observation in capturing cryptic social behaviours in cetaceans and illustrates the value of integrating citizen science into systematic behavioural documentation. The study also reinforces the relevance of managed populations in ethological research and highlights the ethical need for carefully regulated wildlife interaction protocols in marine tourism.
Javier Almunia, Johnny van Vliet, Debbie Bouma. Oceans. 2025, 6(2), 37. doi.org/10.3390/oceans6020037
Clot-induced blockage in arteries or veins can cause severe medical conditions. Mechanical thrombectomy is a minimally invasive technique used to treat ischaemic stroke, myocardial infarction, pulmonary embolism and peripheral vascular disease by removing clots through aspiration, stent retriever or cutting mechanisms. However, current mechanical thrombectomy methods fail to remove clots in 10–30% of patients, especially in the case of large, fibrin-rich clots. These methods can also rupture and fragment clots, causing distal emboli and poor outcomes. To overcome these challenges, we develop the milli-spinner thrombectomy, which uses a simple yet innovative mechanics concept to modify the clot’s microstructure, facilitating its removal. The milli-spinner works by mechanically densifying the clot’s fibrin network and releasing red blood cells through spinning-induced compression and shear forces. It can shrink the clot volume by 95% for easy and fast removal. In vitro tests in pulmonary and cerebral artery flow models and in vivo experiments in swine models demonstrate that the milli-spinner achieves ultrafast clot debulking and high-fidelity revascularization, outperforming aspiration thrombectomy. The milli-spinner thrombectomy directly modifies the clot microstructure to facilitate clot removal, improving mechanical thrombectomy success rates compared with current methods that rely on clot rupture or cutting. This approach offers a promising new direction for mechanical thrombectomy devices, especially for treating ischaemic stroke, pulmonary embolism and peripheral thrombosis.
Chang, Y., Wu, S., Li, Q. et al. Milli-spinner thrombectomy. Nature 642, 336–342 (2025). doi.org/10.1038/s41586-025-09049-0
Abstract
Conservation of damaged oil paintings requires manual inpainting of losses, leading to months-long treatments of considerable expense; 70% of paintings in institutional collections are locked away from public view, in part because of treatment cost. Recent advancements in digital image reconstruction have helped to envision treatment results, although without any direct means of achieving them. Here I describe the physically applied digital restoration of a painting, a highly damaged oil-on-panel attributed to the Master of the Prado Adoration from the late fifteenth century. In parallel, 5,612 losses spanning 66,205 mm2 and 57,314 colours were infilled with a reversible laminate mask comprising a colour-accurate bilayer of printed pigments on polymeric films. To ensure the effectiveness of the restoration, ethical principles in painting conservation were implemented quantitatively for digital mask construction, a critically important foundation lacking in the current digital restoration literature. The infill process took 3.5 h, an estimated 66 times faster than conventional inpainting, and the result closely matched the simulation. This approach grants greatly increased foresight and flexibility to conservators, enabling the restoration of countless damaged paintings deemed unworthy of high conservation budgets.
Kachkine, A. Physical restoration of a painting with a digitally constructed mask. Nature 642, 343–350 (2025). doi.org/10.1038/s41586-025-09045-4
To evaluate the effects of exercise on left ventricular parameters using exercise cardiac MRI in healthy adults without known cardiovascular disease and establish reference ranges stratified by age and sex.
Materials and Methods
This prospective study included healthy adult participants with no known cardiovascular disease or genetic variants associated with cardiomyopathy, enrolled between January 2018 and April 2021, who underwent exercise cardiac MRI evaluation. Participants were imaged at rest and after exercise, and parameters were measured by two readers. Prediction intervals were calculated and compared across sex and age groups.
Results
The study included 161 participants (mean age, 49 years ± 14 [SD]; 85 female). Compared with the resting state, exercise caused an increase in heart rate (64 beats per minute ± 9 vs 133 beats per minute ± 19, P less than .001), left ventricular end-diastolic volume (140 mL ± 32 vs 148 mL ± 35, P less than .001), stroke volume (82 mL ± 18 vs 102 mL ± 25, P less than .001), ejection fraction (59% ± 6 vs 69% ± 7, P less than .001), and cardiac output (5.2 L/min ± 1.1 vs 13.5 L/min ± 3.9, P less than .001) and a decrease in left ventricular end-systolic volume (58 mL ± 18 vs 46 mL ± 15, P less than .001). There were statistically significant differences in exercise response between groups stratified by sex and age for most parameters.
Conclusion
In healthy adults, an increase in cardiac output after exercise was driven by an increase in heart rate with both increased ventricular filling and emptying. Normal ranges for exercise response, stratified by age and sex, were established as a reference for the use of exercise cardiac MRI in clinical practice.
Ronny Schweitzer et al. Radiology: Cardiothoracic Imaging. Published Online:Jun 5 2025. doi.org/10.1148/ryct.240175
Supplementary Video 2: Evolution of vortex beams whose orbital angular momentum experiences linear growth then decay along the optical path.
Supplementary Video 3: Evolution of vortex beams whose orbital angular momentum decays then grows following a linear dependence along the optical path.
Supplementary Video 4: Evolution of vortex beams whose orbital angular momentum experiences quadratic chirp along the optical path, exhibiting optical rotatum.
Abstract
Vortices are ubiquitous in nature and can be observed in fluids, condensed matter, and even in the formation of galaxies. Light, too, can evolve like a vortex. Optical vortex beams are exploited in light-matter interaction, free space communications, and imaging. Here, we introduce optical rotatum, a behavior of light in which an optical vortex beam experiences a quadratic chirp in its orbital angular momentum along the optical path. We show that such an adiabatic deformation of topology is associated with the accumulation of a Gouy phase factor, which, in turn, perturbs the propagation constant (spatial frequency) of the beam. The spatial structure of optical rotatum follows a logarithmic spiral—a signature that is commonly seen in the pattern formation of seashells and galaxies. Our work expands the previous literature on structured light, offers new modalities for light-matter interaction, communications, and sensing, and hints at analogous effects in condensed matter physics and Bose-Einstein condensates.
Ahmed H. Dorrah, Alfonso Palmieri, Lisa Li, and Federico Capasso. Science Advances. 11 Apr 2025, Vol 11, Issue 15.
DOI: 10.1126/sciadv.adr9092
2: Dynamic wheel landing I.
3: Driving take-off and dynamic wheel landing.
4: Take-off and dynamic wheel landing without tether.
5: Landing on slope.
6: Dynamic wheel landing with forward velocity.
7: Smoke Visualization I.
8: Smoke Visualization II.
9: Tilt actuator mechanism animation.
10: MPC controller compared to cascaded PID control.
Abstract
Designing ground-aerial robots is challenging due to the increased actuation requirements which can lead to added weight and reduced locomotion efficiency. Morphobots mitigate this by combining actuators into multi-functional groups and leveraging ground transformation to achieve different locomotion modes. However, transforming on the ground requires dealing with the complexity of ground-vehicle interactions during morphing, limiting applicability on rough terrain. Mid-air transformation offers a solution to this issue but demands operating near or beyond actuator limits while managing complex aerodynamic forces. We address this problem by introducing the Aerially Transforming Morphobot (ATMO), a robot which transforms near the ground achieving smooth transition between aerial and ground modes. To achieve this, we leverage the near ground aerodynamics, uncovered by experimental load cell testing, and stabilize the system using a model-predictive controller that adapts to ground proximity and body shape. The system is validated through numerous experimental demonstrations. We find that ATMO can land smoothly at body postures past its actuator saturation limits by virtue of the uncovered ground-effect.
Mandralis, I., Nemovi, R., Ramezani, A. et al. ATMO: an aerially transforming morphobot for dynamic ground-aerial transition. Commun Eng 4, 74 (2025). doi.org/10.1038/s44172-025-00413-6
Octopuses exploit an efficient neuromuscular hierarchy to achieve complex dexterous body manipulation, integrating sensor-rich suckers, in-arm embodied computation, and centralized higher-level reasoning. Here, we take inspiration from the hierarchical intelligence of the octopus and demonstrate how, by exploiting the fluidic energy and information capacity of simple suction cups, soft computational elements, and soft actuators, we can mimic key aspects of the neuromuscular structure of the octopus in soft robotic systems. The presented suction intelligence works at two levels: By coupling suction flow with local fluidic circuitry, soft robots can achieve octopus-like low-level embodied intelligence, including gently grasping delicate objects, adaptive curling, and encapsulating objects of unknown geometries, and by decoding the pressure response from a suction cup, robots can achieve multimodal high-level perception, including contact detection, classification of an environmental medium and surface roughness, and prediction of an interactive pulling force. As in octopuses, suction intelligence executes most of its computation within lower-level local fluidic circuitries, and minimum information is transmitted to the high-level decision-making of the “brain.” This development provides insights into octopus-inspired machine intelligence through low-cost, simple, and easy-to-integrate methods. The presented suction intelligence can be readily integrated into fluidic-driven soft robots to enhance their intelligence and reduce their computational requirement and can be applied widely, from industrial object handling and robotic manufacturing to robot-assisted harvesting and interventional health care.
Tianqi Yue et al. Science Robotics. 14 May 2025, Vol 10, Issue 102.
DOI: 10.1126/scirobotics.adr4264
Editor’s summary
Plague has devastated human and rodent populations alike many times throughout history. Sidhu et al. tracked the genetics of virulence in the plague pathogen Yersinia pestis in ancient and modern samples. They observed that the bacterial virulence factor pla, a gene encoding a protease, periodically becomes depleted late in epidemics. The authors verified that pla depletion reduces virulence in mouse models of bubonic plague. Therefore, in response to high disease mortality, selection could act to attenuate virulence. This would allow the pathogen to persist in tolerant reservoir hosts when susceptible host populations fragment and pathogen transmission becomes uncertain. —Caroline Ash
Structured Abstract
INTRODUCTION
The Plague of Justinian and the Black Death represent two of the greatest mortality events in recorded human history and are herald waves of the first and second plague pandemics. Genomes of the plague bacterium Yersinia pestis, reconstructed from ancient human remains from about a century into each pandemic, show evidence of a depletion in the copy number of the virulence gene pla, which resides on the high–copy number plasmid (pPCP1) and encodes a plasminogen activator (Pla) protease that is responsible for virulence and pathogenicity in bubonic and pneumonic models of plague.
RATIONALE
To determine the effects of the pla depletion on virulence in mice, we tested modern (third pandemic) strains of Y. pestis from Vietnam that contain the same depletion as ancient strains using models of bubonic, pneumonic, and septicemic plague. We also investigated the genomes of the ancient and modern Y. pestis strains to characterize the molecular basis of the pla depletion.
RESULTS
De novo reconstruction of the ancient and modern strains of Y. pestis that contain lower–copy number pla show transfer from the high–copy number plasmid (pPCP1) to single-copy genomic features in the modern (pCD1) and ancient (chromosome) strains. A common pla deletion mechanism is likely mediated by xrs sites present in pPCP1. Depletion in pla copy number led to an attenuation of virulence in bubonic models of plague (but not pneumonic or septicemic models), with lowered overall mortality (100 to 85%) and a longer time to death (by ~2 days).
CONCLUSION
We hypothesize that natural selection for pla-reduced strains reflects the metapopulation structure of rat populations, supporting epidemiological models in which pathogen attenuation enables disease persistence in small and fragmented populations through frequent, reinitiated epidemics after population recovery. The massive rat mortality that presumably occurred during the first and second pandemics likely led to suppressed rodent densities. By increasing population fragmentation, this created an environment that favored pla-reduced, attenuated strains of Y. pestis over their more virulent wild-type pla relatives. Specifically, a decreased mortality rate and longer time to host death would allow for the continued movement of rodents between existing populations, now more distantly spaced than early in the pandemic, allowing for the continued persistence, and hence increased transmission, of Y. pestis and the slow continual burn of the epidemic.
Ravneet Kaur Sidhu et al. Science. 29 May 2025, Vol 388, Issue 6750.
DOI: 10.1126/science.adt38
2: Two types of elementary actuator units with complex deformation modes.
3: Assembly of elementary actuator units for constructing the ‘transformer’ and ‘turtle’.
4: Assembly of elementary actuator units for constructing geometrically sophisticated actuators with versatile shape-morphing capabilities.
5: Morphable 3D displays.
6: Multimodal wheeled microrobot.
7: Terrestrial indoor locomotion of the terrestrial-aerial microrobot.
8: Multimodal indoor locomotion of the terrestrial-aerial microrobot.
9: Outdoor locomotion of the terrestrial-aerial microrobot.
Abstract
Inspired by natural species that leverage morphological changes to realize multiple locomotion modes, diverse multimodal robots have been reported. While developments of small-scale actuators with continuous shape morphing and locking capabilities controlled by the same energy source are crucial for miniaturization of untethered multimodal robots, it remains elusive. We introduce a synergistic design concept of small-scale continuously morphable actuators (CMAs) that harness precisely programmable actuation deformation of liquid crystal elastomer to achieve continuous shape morphing and high stiffness variation of shape memory polymer to lock geometric configuration, both through electrothermal control. Lego-inspired design strategy allows customized construction of complexly shaped CMAs (for example, ‘transformer’, ‘aircraft’ and ‘turtle’) through rational assembly of elementary actuator units with different ranges of accessible geometric configurations. The powerful shape morphing and locking capabilities, as well as the relatively high load-bearing capacity of the CMAs, allow for developments of versatile exoskeletons that can integrate a diversity of functional components. Demonstrations of unique small-scale transforming machines, such as morphable displays with a rich diversity of three-dimensional geometries, a wheeled microrobot capable of transformation among ‘sports car’, ‘winged car’ and ‘van’, and a lightweight untethered terrestrial–aerial microrobot, suggest a broad spectrum of applications.
Xu, S., Hu, X., Yang, R. et al. Transforming machines capable of continuous 3D shape morphing and locking. Nat Mach Intell 7, 703–715 (2025). doi.org/10.1038/s42256-025-01028-4
Atlases of the brain are critical resources that make it possible to share data in a common reference frame. Unexpectedly, there is no three-dimensional (3D) stereotaxic atlas of the mouse brain that provides whole brain coverage at macro to single-cell levels. Diffusion tensor images from five perfusion-fixed (in skull) specimens were acquired at 15 micrometers, the highest resolution ever reported. Diffusion tensor imaging yields multiple 3D volumes, each of which highlights unique cytoarchitecture. The averages were mapped into micro–computed tomography of the mouse skull to create external landmarks (bregma and lambda). Light sheet images of the same brains were coregistered, providing cell maps in the same stereotaxic space. The Allen Reference Atlas was registered to the volume to correct the geometric distortion in that atlas and bring it into the stereotaxic space. The resulting multiscalar (13 terabytes) atlas provides a common spatial framework to anneal data across molecular, structural, and functional studies of mice.
Harrison Mansour et al. Science Advances. 30 Apr 2025. Vol 11, Issue 18.
DOI: 10.1126/sciadv.adq8089
Pyrocognition has been part of the hominin behavioral repertoire for at least one million years. Here, we report evidence of naturally occurring pyrocognitive behavior in wild bonnet macaques (Macaca radiata) inhabiting a temple site in India. We recorded 2704 instances of macaques attempting to extinguish the fire in offering lamps that contained a food reward (sesame seeds, rice flour, or coconut). Overall, we found significant variation associated with age, with adults experiencing higher foraging success (males 81.1% and females 75.3%) than subadults (males 30.1% and females 18.8%). In addition, there was a positive correlation between the number of lamp manipulations and foraging success among adults, but not among subadults. It appears that despite extensive exposure to burning lamps, subadult bonnet macaques failed to fully understand how their actions in attempting to extinguish the fire resulted in obtaining the food reward. In contrast, over time several adult bonnet macaques appeared to understand how their actions in extinguishing the fire resulted in successfully obtaining a food reward (i.e., causal knowledge). Our results indicate that pyrocognitive behavior develops slowly in bonnet macaques, differs between adults and subadults, is not sex-based, and provides an instructive model for pyrocognition in early hominins.
Summary
- We report evidence of naturally occurring pyrocognitive behavior in wild bonnet macaques (Macaca radiata) inhabiting a temple site in India.
- Macaques actively extinguished the fire in the lamps containing food reward (i.e., sesame, coconut, rice flour).
- Overall, we found significant variation across age classes, with adults (male and female) experiencing higher foraging success than subadults (male and female).
- Pyrocognitive behavior develops slowly in bonnet macaques, differs between adults and subadults, is not sex-based.
- This is the first report of pyrocognitive behavior in bonnet macaques.
Mildred Berlena Blessy Herald Victor et al. American Journal of Primatology. First published: 16 April 2025. doi.org/10.1002/ajp.70035
The use of complex technologies by humans (Homo sapiens) and their ancestors is a key feature of our evolution, marked by the appearance of stone tools 3.3-million years ago. These technologies reflect cognitive complexity and an advanced understanding of materials and mechanics. Studying current primates, especially those that use stones, offers insights into the evolution of human behaviours. In particular, stone manipulation by macaques suggests that some complex behaviours in humans, such as creation of cutting and biface tools, could have emerged unintentionally. The Japanese macaques (Macaca fuscata) of Shodoshima were observed to leave marks on the ground with stones and chalk. By analysing this manipulation of stones, I suggest that drawing in humans could have appeared unintentionally; these unintentional origins of mark-making behaviours may represent early precursors to human drawing.
Sueur, C. From stones to sketches: investigating tracing behaviours in Japanese macaques. Primates 66, 183–188 (2025). doi.org/10.1007/s10329-024-01176-y
Stressed thin sheets can form complex shapes that are caused by mechanical instabilities. An example of this in nature is the growth of leaves. Many of these shapes can be described by Gauss incompatibility. An exception to this behavior is the shape of rose petals, which do satisfy Gauss conditions. However, Zhang et al. have shown that the formation of localized cusps along the edges of rose petals during their growth is driven by Mainardi-Codazzi-Peterson incompatibility instead (see the Perspective by Cui and Jin). Although this theory is known, it has not been connected to natural growth. By combining theory, simulations, and experimental results, including the fabrication of synthetic petals, the authors provide an expanded perspective on the geometric frustrations that affect morphogenesis in biological systems and qualitatively demonstrate the role of stress concentration in petal growth. —Marc S. Lavine
Abstract
Growth and form are deeply interconnected, in a manner often mediated by mechanical instabilities arising from geometric incompatibilities. Although Gauss incompatibility has long been recognized as the source of morphing in naturally growing slender organs, here we show that the growth profile of rose petals remains Gauss compatible. Their distinctive shape emerges from a different type of geometric incompatibility, the Mainardi-Codazzi-Peterson (MCP) incompatibility, which leads to the formation of localized cusps along the petal margins. We validated this mechanism in model disc petals theoretically, computationally, and experimentally. Our study reveals distinct morphological regimes, ranging from smooth edges to cusp-forming configurations, and demonstrates how stress focusing at cusps influences subsequent petal growth. These findings position MCP incompatibility as a generic mechanism for cusp formation in both natural and manmade self-morphing sheets.
Yafei Zhang et al. Science. 1 May 2025, Vol 388, Issue 6746, pp. 520-524.
science.org/doi/10.1126/science.adt0672
Entomopathogenic nematodes (EPNs) exhibit a bending-elastic instability, or kink, before becoming airborne, a feature previously hypothesized but not substantiated to enhance jumping performance. Here, we provide the evidence that this kink is crucial for improving launch performance. We demonstrate that EPNs actively modulate their aspect ratio, forming a liquid-latched α-shaped loop over a slow timescale (1 second), and then rapidly open it (10 microseconds), achieving heights of 20 body lengths and generating power of ∼104 watts per kilogram. Using a bioinspired physical model [termed the soft jumping model (SoftJM)], we explored the mechanisms and implications of this kink. EPNs control their takeoff direction by adjusting their head position and center of mass, a mechanism verified through phase maps of jump directions in numerical simulations and SoftJM experiments. Our findings reveal that the reversible kink instability at the point of highest curvature on the ventral side enhances energy storage using the nematode’s limited muscular force. We investigated the effect of the aspect ratio on kink instability and jumping performance using SoftJM and quantified EPN cuticle stiffness with atomic force microscopy measurements, comparing these findings with those of Caenorhabditis elegans. This investigation led to a stiffness-modified SoftJM design with a carbon fiber backbone, achieving jumps of ∼25 body lengths. Our study reveals how harnessing kink instabilities, a typical failure mode, enables bidirectional jumping in soft robots on complex substrates like sand, offering an approach for designing limbless robots for controlled jumping, locomotion, and even planetary exploration.
Sunny Kumar et al. Science Robotics. 23 Apr 2025, Vol 10, Issue 101
DOI: 10.1126/scirobotics.adq3121
The present work introduces an on-demand cleaning technology that addresses the problem of crystal encrustation and bacterial biofilm formation, with potential applications across various medical devices. Cleaning action is achieved by combining surface topographies and ultrasound-induced fluid motion, creating a robust solution to keep surfaces free from biofilm and encrustation. This approach is particularly important in indwelling medical devices, where maintaining clean surfaces is critical to patient safety and device performance. By effectively addressing these issues, our technology has the potential to enhance equipment efficiency and longevity, reduce contamination risks, and lower operational costs, ultimately leading to improvements in public health outcomes.
Abstract
Biofilm formation and encrustation are major issues in indwelling medical devices, such as urinary stents and catheters, as they lead to blockages and infections. Currently, to limit these effects, frequent replacements of these devices are necessary, resulting in a significant reduction in patients’ quality of life and an increase in healthcare costs. To address these challenges, by leveraging recent advancements in robotics and microfluidic technologies, we envision a self-cleaning system for indwelling medical devices equipped with bioinspired ultrasound-activated cilia. These cilia could be regularly activated transcutaneously by ultrasound, generating steady streaming, which can be used to remove encrusted deposits. In this study, we tested the hypothesis that the generated streaming can efficiently remove encrustations and biofilm from surfaces. To this end, we developed a microfluidic model featuring ultrasound-activated cilia on its wall. We showed that upon ultrasound activation, the cilia generated intense, steady streaming, reaching fluid velocity up to 10 mm/s. In all our experiments, this mechanism was able to efficiently clean typical encrustation (calcium carbonate and oxalate) and biofilm found in urological devices. The generated shear forces released, broke apart, and flushed away encrusted deposits. These findings suggest a broad potential for ultrasound-activated cilia in the maintenance of various medical devices. Compared to existing methods, our approach could reduce the need for invasive procedures, potentially lowering infection risks and enhancing patient comfort.
Pedro Amado et al. PNAS. April 28, 2025, 122 (18) e2418938122.
doi.org/10.1073/pnas.2418938122
Cilia are short, hair-like appendages ubiquitous in various biological systems, which have evolved to manipulate and gather food in liquids at regimes where viscosity dominates inertia. Inspired by these natural systems, synthetic cilia have been developed and utilized in microfluidics and microrobotics to achieve functionalities such as propulsion, liquid pumping and mixing, and particle manipulation. Here, we demonstrate ultrasound-activated synthetic ciliary bands that mimic the natural arrangements of ciliary bands on the surface of starfish larva. Our system leverages nonlinear acoustics at microscales to drive bulk fluid motion via acoustically actuated small-amplitude oscillations of synthetic cilia. By arranging the planar ciliary bands angled towards (+) or away (−) from each other, we achieve bulk fluid motion akin to a flow source or sink. We further combine these flow characteristics with a physical principle to circumvent the scallop theorem and realize acoustic-based propulsion at microscales. Finally, inspired by the feeding mechanism of a starfish larva, we demonstrate an analogous microparticle trap by arranging + and − ciliary bands adjacent to each other.
Dillinger, C., Nama, N. & Ahmed, D. Ultrasound-activated ciliary bands for microrobotic systems inspired by starfish. Nat Commun 12, 6455 (2021). doi.org/10.1038/s41467-021-26607-y
For flying insects, the transition from flight to surface locomotion requires effective touchdown maneuvers that allow stable landings on a variety of surfaces. Landing behaviors of insects are diverse, with some using more controlled flight approaches to landing, whereas others dampen collision impacts with parts of their bodies. The landing approaches of real insects inspired our current work, where we present a combined mechanical and control approach to achieving safe and accurate landings for flapping-wing microaerial vehicles. For the mechanical approach to landing, we took inspiration from the legs of the crane fly, designing lossy compliant legs that maximize energy dissipation during surface collisions. We explored three features in the compliant leg design: leg stance, number of joints, and joint placement. For the control approach to landing, the challenge lies in overcoming the aerodynamic ground effect near the surface. Leveraging the compliant leg design during impact, we designed the preimpact behavior, drawing inspiration from insect landing trajectories, to increase landing success. The proposed controlled landing sequence includes an initial acceleration from hovering, followed by deceleration toward the target, ending with a nonzero impact velocity, similar to what is observed in insects. Last, using an insect-scale flapping-wing aerial microrobot platform (Harvard RoboBee), we verified the controlled, safe, and accurate landing on natural terrain.
Nak-seung P. Hyun et al. Science Robotics. 16 Apr 2025, Vol 10, Issue 101
DOI: 10.1126/scirobotics.adq3059
Insect-scale robots face two major locomotive challenges: constrained energetics and large obstacles that far exceed their size. Terrestrial locomotion is efficient yet mostly limited to flat surfaces. In contrast, flight is versatile for overcoming obstacles but requires high power to stay aloft. Here, we present a hopping design that combines a subgram flapping-wing robot with a telescopic leg. Our robot can hop continuously while controlling jump height and frequency in the range of 1.5 to 20 centimeters and 2 to 8.4 hertz. The robot can follow positional set points, overcome tall obstacles, and traverse challenging surfaces. It can also hop on a dynamically rotating plane, recover from strong collisions, and perform somersaults. Compared to flight, this design reduces power consumption by 64 percent and increases payload by 10 times. Although the robot relies on offboard power and control, the substantial payload and efficiency improvement open opportunities for future study on autonomous locomotion.
Yi-Hsuan Hsiao et al. Science Advances. 9 Apr 2025, Vol 11, Issue 15
DOI: 10.1126/sciadv.adu4474
Binding particles to an interface between immiscible liquids to reduce interfacial tension underpins the emulsification and phase behaviour of composite liquid systems. Nevertheless, we found that the strong binding and two-dimensional assembly of ferromagnetic particles at a liquid–liquid interface not only suppresses emulsification but also increases interfacial tension. Consequently, the particle-stabilized interface in a cylindrical vessel rapidly and reproducibly adopts the shape of a Grecian urn after vigorous agitation. The suppression of emulsification, the rapid formation of a stable, non-planar equilibrium interface shape and the increase in interfacial tension all originate from attractive in-plane dipolar magnetic interactions between the particles.
Raykh, A., Paulsen, J.D., McGlasson, A. et al. Shape-recovering liquids. Nat. Phys. (2025). doi.org/10.1038/s41567-025-02865-1
• Automating the entire micromanipulation element of intracytoplasmic sperm injection (ICSI).
• Enabling remote control and supervision of ICSI.
• ICSI was performed by a remote operator 3700 km away.
• First live birth following fertilization by remote ICSI.
ABSTRACT
Research question
Can a fully automated, digitally controlled, remotely operated system execute the entire micromanipulation process of intracytoplasmic sperm injection (ICSI)?
Design
A workstation automating the 23 micromanipulation steps of ICSI was engineered. The system operated independently under artificial intelligence control or under digital control executed by a remote operator. Pre-clinical validation was conducted with animal models to ensure safety and efficacy. In a clinical application, five donor oocytes intended for the treatment of a 40-year-old patient were fertilized using the automated ICSI system under remote supervision; three additional oocytes were injected manually as controls. Elective single embryo transfers were performed.
Results
The automated ICSI system achieved an 80% fertilization rate (n = 4/5), comparable with the manual controls (100%, n = 3/3). Two usable blastocysts were generated in each group. A fresh embryo transfer using an experimental embryo did not result in pregnancy. However, the transfer of a warmed blastocyst from the automated ICSI group resulted in a healthy live birth at 38 weeks of gestation. The system completed 49.6% of the required 115 micromanipulation steps (23 per oocyte) autonomously, and the remaining steps were conducted under digital control by the remote operator. The average time for automated injection of an oocyte was 9 min and 56 s. On-site human intervention was required for the initial set-up, and was needed on one occasion for troubleshooting one of the automated steps.
Conclusions
This study demonstrates the feasibility of fully automated, remotely operated ICSI achieving a live birth. While improvements in autonomy and efficiency are needed, this milestone highlights the potential for automated systems to transform assisted reproductive technology practices globally, enhancing accessibility and standardization.
Mendizabal-Ruiz, Gerardo et al. A digitally controlled, remotely operated ICSI system: case report of the first live birth. Reproductive BioMedicine Online, Volume 0, Issue 0, 104943. doi.org/10.1016/j.rbmo.2025.104943
Lack of Herpes Simplex Virus (HSV) vaccine, low vaccination rates of Influenza viruses, waning immunity and viral transmission after vaccination underscore the need to reduce viral loads at their transmission sites. Oral virus transmission is several orders of magnitude higher than nasal transmission. Therefore, in this study, we evaluated neutralization of viruses using a natural viral trap protein (FRIL) formulated in clinical-grade chewing gum. FRIL is highly stable in the lablab bean powder (683 days) and in chewing gum (790 days), and fully functional (794 days) when stored at ambient temperature. They passed the bioburden test with no aerobic bacteria, yeasts/molds, with minimal moisture content (1.28–5.9%). Bean gum extracts trapped HSV-1/HSV-2 75–94% in a dose-dependent manner through virus self-aggregation. Mastication simulator released less than 50% release of FRIL within 15 min of chewing the bean gum. In plaque reduction assays, less than 95% neutralization of H1N1 and H3N2 required ∼40 mg/mL, HSV-1 160 mg/mL, and HSV-2 74 mg/mL of bean gum for 1,000 copies/mL virus particles. Therefore, a 2000 mg bean gum tablet has more than adequate potency for clinical evaluation and is safe with no detectable levels of glycosides. These observations augur well for evaluating bean gum in human clinical studies to minimize virus infection/transmission.
Henry Daniell et al. Molecular Therapy. Volume 33, Issue 1, p184-200, January 08, 2025.
doi.org/10.1016/j.ymthe.2024.12.008
The downward movement of the bubble-texture in a glass of Guinness beer is a fascinating fluid flow driven by the buoyant force of a large number of small-diameter bubbles. This texture motion is a frequently observed phenomenon on pub tables. The physical mechanism of the texture-formation has been discussed previously, but inconsistencies exist between these studies. We performed experiments on the bubble distribution in Guinness poured in an inclined container, and observed how the texture forms. We also report the texture-formation in controllable experiments using particle suspensions with precisely specified diameters and volume-concentrations. Our specific measurement methods based on laser-induced-fluorescence provide details of the spatio-temporal profile of the liquid phase velocity. The hydrodynamic condition for the texture-formation is analogous to the critical point of the roll-wave instability in a fluid film, which can be commonly observed in water films sliding downhill on a rainy day. Here, we identify the critical condition for the texture-formation and conclude that the roll-wave instability of the gravity current is responsible for the texture-formation in a glass of Guinness beer.
Watamura, T., Iwatsubo, F., Sugiyama, K. et al. Bubble cascade in Guinness beer is caused by gravity current instability. Sci Rep 9, 5718 (2019). doi.org/10.1038/s41598-019-42094-0
The fully automated fabrication of robots has long been a holy grail with thepotential to revolutionize various industries, including manufacturing, con-struction, disaster relief, and space exploration. 3D printing offers a promisingapproach to automation, but the ability to print entire, complex robots withmultiple materials remains limited. Previous approaches have simplified robotmanufacturing by using fluidic control circuits, but these rely on labor-intensivemethods like silicone molding and manual assembly, limiting accessibility andreplicability. Recent work, including this work, has demonstrated 3D-printedrobotic grippers and crawlers with embedded control circuits, but generatingcyclic control outputs for legged locomotion in rough terrain remains challenging.This study addresses the challenge with a monolithic 3D-printable four-phasebistable oscillating valve, capable of generating coordinated motion of multiplelimbs from a steady source of pressurized air. The ability of the oscillator tocontrol an electronics-free autonomous legged robot capable of walking on roughterrain, which can be fully fabricated on a desktop 3D printer without postas-sembly is demonstrated. The robot is operational immediately upon connectionto an air supply. This development marks a significant step toward accessible,customizable, and biodegradable autonomous soft robots that can be producedusing desktop 3D printers with no human intervention.
Yichen Zhai et al. Advanced Intelligent Systems. 2025, 2400876.
doi.org/10.1002/aisy.202400876
Magnetic fields enable remote manipulation of objects and are ideal for medical applications because they pass through human tissue harmlessly. This capability is promising for surgical robots, allowing navigation deeper into the human anatomy and accessing organs beyond the reach of current technologies. However, magnetic manipulation is typically limited to a maximum two–degrees-of-freedom orientation, restricting complex motions, especially those including rolling around the main axis of the magnetic robot. To address this challenge, we introduce a robot design inspired by embodied intelligence and the unique geometry of developable rollers, leveraging the oloid shape. The oloid, with its axial asymmetry and sinusoidal motion, facilitates rolling when precisely controlled by an external magnetic field. We present a versatile closed-loop control model to ensure precise magnetic manipulation of an oloid-shaped robot. This capability was validated in endoluminal applications through the integration of a 28-megahertz micro-ultrasound array to perform virtual biopsies, noninvasive real-time histological imaging. Extensive in vitro and in vivo tests using a porcine model showed the robot’s ability to execute sweeping motions, identify lesions, and generate detailed three-dimensional scans of gastrointestinal subsurface tissue. This research not only restores a critical movement capability to magnetic medical robots but also enables additional clinical applications deep within the human body.
Nikita J. Greenidge et al. Science Robotics. 26 Mar 2025, Vol 10, Issue 100
DOI: 10.1126/scirobotics.adq4198
The nuclear pore complex (NPC) mediates nucleocytoplasmic exchange, catalysing a massive flux of protein and nucleic acid material in both directions. Distinct trafficking pathways for import and export would be an elegant solution to avoid unproductive collisions and opposing movements. However, the three-dimensional (3D) nanoscale spatiotemporal dynamics of macromolecules traversing the NPC remains challenging to visualize on the timescale of millisecond-scale transport events. Here we used 3D MINFLUX2 to identify the nuclear pore scaffold and then to simultaneously monitor both nuclear import and nuclear export, thereby establishing that both transport processes occur in overlapping regions of the central pore. Whereas translocation-arrested import complexes bound at the pore periphery, tracks of translocating complexes within the central pore region revealed a preference for an approximately 40- to 50-nm diameter annulus with minimal circumferential movement, indicating activity-dependent confinement within the permeability barrier. Movement within the pore was approximately 1,000-fold slower than in solution and was interspersed with pauses, indicating a highly restricted environment with structural constraints and/or transient binding events during transport. These results demonstrate that high spatiotemporal precision with reduced photobleaching is a major advantage of MINFLUX tracking, and that the NPC permeability barrier is divided into annular rings with distinct functional properties.
Sau, A., Schnorrenberg, S., Huang, Z. et al. Overlapping nuclear import and export paths unveiled by two-colour MINFLUX. Nature (2025). doi.org/10.1038/s41586-025-08738-0
Movie S2. Time-lapse TIRFM image sequence demonstrating the typical 3-D mobility of protoplasts during cell wall regeneration. Especially, the whole cell motion in Z-direction interrupts continuous monitoring of cellulose biosynthesis on a protoplast surface in a long term. Cellulose was in situ stained with Alexa568-tdCBM3a in a regeneration media (WI/M2). Image acquisition began 5 hours after the start of cell wall regeneration and continued for ~12.5 hours. Acquisition speed: 1 frame per 5 minutes.
Movie S3. Time-lapse TIRFM image sequences demonstrating cellulose biosynthesis and fibril formation on surfaces of 14 protoplasts during initial ~24 hours of cell wall regeneration. Cellulose was in situ stained with Alexa568-tdCBM3a in a cell wall regeneration media (WI/M2). The 14 cells shown here are selected from microscopy data acquired for two different batches of isolated protoplasts. The timestamps indicate the elapsed time since the start of cell wall regeneration for each cell. Acquisition speed: 1 frame per 6 minutes.
Movie S4. Time-lapse TIRFM image sequence demonstrating cell-to-cell variability in cellulose biosynthesis dynamics in protoplasts during cell wall regeneration. In this exemplary data, similar behaviors are observed among multiple protoplasts within the same imaging field of view. Acquisition speed: 1 frame per 10 minutes.
Movie S5. Time-lapse TIRFM image sequence demonstrating random diffusive motion of short cellulose fibril fragments nascently synthesized and deposited on the surface of protoplast at the early stage of cell wall regeneration. The trajectory of a cellulose fragment is overlaid for better visualization of the motion. Cellulose was in situ stained with Alexa568-tdCBM3a. Acquisition speed: 1 frame per 2 minutes. Scale bar: 2 μm.
Movie S6. Time-lapse TIRFM image sequences for additional 8 cells (derived from 3 different batches) show that diffusive motions of cellulose fibril fragments are prevalently observed on protoplast surfaces at various fibril length scale and across different cell wall regeneration stages. Acquisition speed: 1 frame per 20 seconds.
Movie S7. Time-lapse TIRFM image sequence showing coalescence events between nascently synthesized cellulose fibrils on the protoplast surface, which lead to generation of thicker and/or longer fibrils. Acquisition speed: 1 frame per 20 seconds. Scale bar: 2 μm.
Movie S8. Time-lapse TIRFM image sequences for additional 8 cells (derived from 4 different batches) show that coalescences of cellulose fibrils promote self-assembly of cellulose fibril networks on protoplast surfaces. Acquisition speed: 1 frame per 2 minutes (1st row); 1 frame per 20 seconds (2nd an 3rd rows).
Movie S9. Time-lapse TIRFM image sequence showing dynamic morphological changes of a coalesced cellulose fibril on the protoplast surface. Acquisition speed: 1 frame per 20 seconds.
Movie S10. Time-lapse TIRFM image sequence showing dynamic bending and unbending of an extended cellulose fibril on the protoplast surface. Acquisition speed: 1 frame per 2 minutes.
Movie S11. Time-lapse TIRFM image sequence showing an extreme bending (nearly 180°) event that leads to an intra-fibrillar coalescence of a single cellulose fibril on the protoplast surface. Acquisition speed: 1 frame per 2 minutes.
Movie S12. Time-lapse TIRFM image sequences showing processive growth of single cellulose fibrils on protoplast surfaces in 4 cells. Acquisition speed: 1 frame per 2 minutes (top left panel); 1 frame per 20 seconds (rest of the panels).
Movie S13. Time-lapse TIRFM image sequences showing cellulose fibril networks whose morphologies slowly but continuously changes on protoplast surfaces as the cell wall regeneration process goes to completion in 11 cells (derived from 4 different batches). Acquisition speed: 1 frame per 20 seconds.
Movie S14. Time-lapse TIRFM image sequence showing fluorescence blinking of Alexa568-tdCBM3a dye that labels a surface-adsorbed protoplast cellulose fibril network. The fluorescence blinking events, which was induced under a strong 561nm laser excitation and a special buffer condition, are analyzed to produce a super-resolution image. Acquisition speed: 33 frames per second. Scale bar: 5 μm.
Movie S15. Time-lapse TIRFM image sequence of cellulose synthesis and fibril formation on the surface of 7 xyloglucan knockout mutant (xxt1/xxt2) derived protoplasts (from a single batch) in the regeneration media (WI/M2). Image acquisition began 2 hours after the start of cell wall regeneration and continued for ~24 hours. Acquisition speed: 1 frame per 6 minutes.
Hyun Huh et al. Science Advances. 21 Mar 2025. Vol 11, Issue 12. DOI: 10.1126/sciadv.ads6312
Abstract
Levitated optomechanical systems are rapidly becoming leading tools for precision sensing of forces and accelerations acting on particles in the femtogram to nanogram mass range. These systems enable a high level of control over the sensor's center-of-mass motion, rotational degrees of freedom, and electric charge state. For many sensing applications, extending these techniques to arrays of sensors enables rejection of correlated noise sources and increases sensitivity to interactions that may be too rare or weak to detect with a single particle. Here we present techniques capable of trapping defect-free, two-dimensional arrays of more than 25 microspheres in vacuum. These techniques provide independent control of the optical potential for each sphere. Simultaneous imaging of the motion of all spheres in the array is demonstrated using camera-based imaging, with optimized object tracking algorithms reaching a displacement sensitivity below 1 nm/√Hz. Such arrays of levitated microspheres may find applications ranging from inertial sensing to searches for weakly interacting particles such as dark matter.
Benjamin Siegel et al. Phys. Rev. A 111, 033514 – Published 17 March, 2025.
doi.org/10.1103/PhysRevA.111.033514
Movie S2. Plectoneme formation, removal, and chiral reversal in polyester-PAA loop.
Movie S3. Plectoneme formation and removal in polyester-PAA at isobaric 210 kPa.
Movie S4. Solenoid formation and removal in polyester-PAA at 900 kPa.
Movie S5. Solenoid formation and removal in PAN-PAA composite fiber.
Movie S6. Full sample view of isobaric plectoneme formation and removal in polyester-PAA composite fiber.
Movie S7. Fast plectoneme formation and removal in PAN-PAA composite fiber.
Movie S8. Multi-strand PAN-PAA actuator array.
Abstract
Powering miniature robots using actuating materials that mimic skeletal muscle is attractive because conventional mechanical drive systems cannot be readily downsized. However, muscle is not the only mechanically active system in nature, and the thousandfold contraction of eukaryotic DNA into the cell nucleus suggests an alternative mechanism for high-stroke artificial muscles. Our analysis reveals that the compaction of DNA generates a mass-normalized mechanical work output exceeding that of skeletal muscle, and this result inspired the development of composite double-helix fibers that reversibly convert twist to DNA-like plectonemic or solenoidal supercoils by simple swelling and deswelling. Our modeling-optimized twisted fibers give contraction strokes as high as 90% with a maximum gravimetric work 36 times higher than skeletal muscle. We found that our supercoiling coiled fibers simultaneously provide high stroke and high work capacity, which is rare in other artificial muscles.
Geoffrey M. Spinks, Nicolas D. Martino, Sina Naficy, David J. Shepherd, and Javad Foroughi. Science Robotics. 28 Apr 2021. Vol 6, Issue 53. DOI: 10.1126/scirobotics.abf4788
Biomimetic corpus cavernosum model perfusion.
Supplementary Video 2
Biomimetic corpus cavernosum model perfusion with bionic tunica albuginea.
Supplementary Video 3
Erectile dysfunction model perfusion.
Supplementary Video 4
Peyronie’s disease model perfusion.
Abstract
The intricate topology of vascular networks and the complex functions of vessel-rich tissues are challenging to reconstruct in vitro. Here we report the development of: in vitro pathological models of erectile dysfunction and Peyronie’s disease; a model of the penis that includes the glans and the corpus spongiosum with urethral structures; and an implantable model of the corpus cavernosum, whose complex vascular network is critical for erectile function, via the vein-occlusion effect. Specifically, we 3D printed a hydrogel-based corpus cavernosum incorporating a strain-limiting tunica albuginea that can be engorged with blood through vein occlusion. In corpus cavernosum defects in rabbits and pigs, implantation of the 3D-printed tissue seeded with endothelial cells restored normal erectile function on electrical stimulation of the cavernous nerves as well as spontaneous erectile function within a few weeks of implantation, which allowed the animals to mate and reproduce. Our findings support the further development of 3D-printed blood-vessel-rich functional organs for transplantation.
Wang, Z., Liu, X., Ye, T. et al. 3D-printed perfused models of the penis for the study of penile physiology and for restoring erectile function in rabbits and pigs. Nat. Biomed. Eng (2025). doi.org/10.1038/s41551-025-01367-y
In mutualistic symbiosis, organisms often provide food to their partners. However, the processes and significance of food provisioning to hosts remain poorly understood. The anemonefish Amphiprion clarkii, which prefers larger hosts, has been suggested to provide food to its host the sea anemone Entacmaea quadricolor. In the present study, we investigated food provisioning by anemonefish and its effects on the symbiotic relationships. When given foods of various sizes and types in the field, anemonefish selectively consumed small animal food (krill, clams, squid, and fish) and green macroalgae of small size, while providing larger pieces of animal food to their hosts. Additionally, the anemonefish avoided either eating or providing brown macroalgae and sponges to the host anemone, which appeared to be unsuitable as food for both anemonefish and sea anemones. When repeatedly provided small pieces of animal food, the anemonefish initially consumed the food themselves, but upon satiety, increased provisioning to the host. Food provisioning positively influenced the growth of host anemones. These findings suggest that anemonefish actively provide food to host anemones based on the situation, adding to our knowledge of the mutual benefits of symbiosis among partners.
Kobayashi, Y., Kondo, Y., Kohda, M. et al. Active provisioning of food to host sea anemones by anemonefish. Sci Rep 15, 4115 (2025). doi.org/10.1038/s41598-025-85767-9
• Foraging innovations, like dunking food, are linked to various cognitive measures
• We observed cockatoos dunking food in soy yogurt to add flavor to the food
• We used experimentally controlled tests to rule out alternative explanations
• This is the second, functionally different, dunking innovation in this group
Summary
Dunking behavior can be a foraging innovation in non-human animals in which food is dipped in a medium prior to consumption. Five functions of this behavior have previously been suggested (soaking, cleaning, flavoring, drowning, and transporting liquid). Although experimental reports exist, most dunking observations are anecdotal, making it hard to infer its function. Previously, we reported innovative dunking behavior in a group of Goffin’s cockatoos (Cacatua goffiniana) with the apparent function of soaking dry food. Here, we report cockatoos dunking in soy yogurt with the likely function of flavoring their food, something thus far only observationally reported in Japanese macaques. In an experimental setup with two types of soy yogurt and water, 9 out of 18 cockatoos dragged food through yogurt, with an overall preference for blueberry-flavored yogurt over neutral yogurt, which could not be explained by color preference alone. Furthermore, the cockatoos showed an overall preference for the combination of yogurt and noodles in a separate food preference task. This combination of quantitative and qualitative results indicates that the cockatoos use yogurt to flavor their food, preferring this combination rather than the yogurt flavor alone. Considering that not all cockatoos dunk their food in yogurt, and little overlap in individuals dunking in a previous study, this suggests a second food preparation innovation in this species. Our results thus provide experimental evidence of innovative food flavoring behavior outside the primate lineage, which may supplement our present understanding of the emergence of rare forms of food preparation behaviors in animals.
Jeroen Stephan Zewald, Alice Marie Isabel Auersperg. Current Biology. Published online February 10, 2025. DOI: 10.1016/j.cub.2025.01.002


