Uploaded April 2021 | Updated September 2026, 2 hours ago

---

Level: Beginner
Recorded in: Autodesk Flame 2022
Download Media: areadownloads.autodesk.com/wdm/flame/ct_p002.zip


In the first part of this series, you learnt the standard workflow to set up the Camera Analysis and perform a 3D track.

In this video, you’ll pick up just after performing the first analysis and look into all the different refinements and validations to get the best 3D track.

So you’ll look at what information you get just after the analysis, refining the 3D track, hiding unwanted points, defining the ground plane, setting the centre point of the 3D composite and finally, you’ll check the point cloud for 3D accuracy.


If you wish to follow along, you can download the 30-day Flame trial at autodesk.com/products/flame/free-trial

or if you are in education, you can sign up for a free 3-year license at autodesk.com/education/free-software/flame


For Additional Information, Feedback and Comments:

Autodesk Area
area.autodesk.com/learning/resource/flame

Facebook
facebook.com/AutodeskFlame

Twitter
@Autodesk_Flame #AutodeskFlame


00:00 - Introduction
00:50 - Info after 1st Analysis
01:35 - Refining the Trackers
03:50 - Hiding Tracking Points
04:35 - Defining the Ground Plane
05:32 - Define the centre of 3D space
06:17 - Validating the point cloud & 3D track