Swan Neck Push Stick / Pushing Stick Savvas Papasavva 2026-09-29 | Swan Neck Push Stick / Pushing Stick
Mini Klingon Batleth! #Startrek #Tools #diy Savvas Papasavva 2024-05-12 | Pulled this tool out recently to clean gunk out between decking. I would also use it to open tins of paint.
DIY Underwater Camera Housing Footage Savvas Papasavva 2024-05-06 | Footage from Sweden Kungshamn using DIY underwater housing.
Making Cypriot Coffee #Cyprus #Coffee Savvas Papasavva 2024-05-04 | Making Cypriot coffee. This footage was part of editing workshop I would use to run: youtu.be/YhUxaud0Wzg?si=7TVBwXRzmDDa2LD6 - Everyone edits video differently.
Espresso Coffee Centrifugal Force #Exercise #Workout #coffee Savvas Papasavva 2024-05-03 | Making an Espresso Coffee with Centrifugal Force.
Upholstering Bar Stool With Piccadilly Line Moquette #TheTube #TFL Savvas Papasavva 2024-05-03 | Excerpt from Piccadilly Line train moquette pattern bar stool upholstering.
Electric Toothbrush Wind Turbines! #WindPower #Teeth #Brush #GreenSmile Savvas Papasavva 2024-04-28 | Do Electric Toothbrushes Dream of Wind Turbines?
Guitar Cat #DIY #filmequipment #tripod #Handmade Savvas Papasavva 2024-04-27 | The full video contains a collection of DIY filming equipment that I've made and and the videos made with them. Including a wooden camera clamp, a guitar tripod, a movie tube, a body harness, and an underwater camcorder housing. Video collaborations with Nathan Birchenough, Craig Kao and Reuben Cope. The full cat guitar video and instrument were shows in an exhibition at the Camden Arts Centre in London circa 2007-2008.
Double Neck #Guitar #Acoustic #DIY Savvas Papasavva 2024-04-26 | "Son: hey dad I was thinking of buying myself a double neck guitarDad: no need I got you covered"Was the best comment form the original longer video.
Ladybird Tin! #Sensory #Toy #Drawing #Art #Toy Savvas Papasavva 2024-04-26 | In this video I make my own label for a food tin. It looks like a ladybird. Don't play with your food!
Beaded balloon whisk!! #Sensory #Toy #Art #Handmade Savvas Papasavva 2024-04-26 | In this video I make a sensory art toy using a balloon whisk and beads.
Testing the Vortex Cannon Guitar #Instrument Savvas Papasavva 2024-04-24 | This was the second attempt at making a vortex cannon guitar which fires smoke rings from the instruments body.
Making a Camera Lucida Drawing Tool #3dprinting #drawing Savvas Papasavva 2024-04-24 | A short intro to a longer video where I design, 3d print and make several iterations of camera lucida drawings aids. If you are into art and drawings this might be of interest.
Making a Camera Lucida Drawing Tool Savvas Papasavva 2024-04-20 | In this video I share the designing considerations and assembly process of several iterations of camera lucidas, which I made up in CAD, 3D printed, and constructed. There is also a demonstration of the tool at the end of the video.00:00 Introduction02:08 Version 106:02 Version 208:21 Version 312:44 Version 414:37 DemonstrationInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
I look like a Ladybird but Im actually a tin of... or am I? - Sensory Art Toy Savvas Papasavva 2024-04-07 | I look like a ladybird but I'm actually a tin of... or am I? Instagram: http://instagram.com/savvas_papasavva Website: http://www.miscpro.com
Beaded Balloon Whisk - Sensory Art Toy Savvas Papasavva 2024-03-05 | Art or sensory toy? That is the question. If it is a sensory toy, it should always be invigilated by an adult. 00:00 Dismantling the balloon whisk00:53 The beads01:19 Feeding the beads02:33 Reassembling the whisk04:30 Gluing the loops05:08 Hot glue05:23 MarvellingInstagram: http://instagram.com/savvas_papasavva Website: http://www.miscpro.com
P3 Gluing & Turning Sample The Playing Cards Walking Stick Savvas Papasavva 2023-12-26 | In this series of videos, I am attempting to make a lost artefact, a walking stick made from playing cards purportedly made by my great grandfather. In the first video I introduced the characters which make up part of this family mythology, and in the previous video, I unboxed and setup a manual die cutting press, designed a cutting and creasing former that I had fabricated, and made a jig for holding playing cards to be used with the former and press. In this video I make up a small sample which I glue and turn on the lathe.00:00 Intro00:56 2010 attempt01:30 Crack01:52 Soaking and glueing02:26 Skewering02:56 Clamping03:14 Cured sample03:30 Setting up wood-lathe03:55 Turning04:59 The mill05:10 Osmo finish 05:54 Finished piece & ConclusionArtist CV: miscpro.com/artist-cvInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
P2 Die Cutting/Creasing Former, Press Machine, Alignment Jig - The Playing Cards Walking Stick Savvas Papasavva 2023-07-16 | In the last video I introduced the characters that make up part of a family mythology. Linking myself to a place I’ve never actually been too – a small village called Komi Kebir in what is now Northern Cyprus. The main protagonist, and to whom the stories entangle is a blacksmith called Kyriacos, and I am to believe my great-grandfather. From the loss of his father as a young child, a struggle ensued which was left to his knife wielding mother to ensure he could be sent away to receive an apprenticeship, which was pivotal to the life he eventually led but also broke him away from the tradition of following in his father’s footsteps as a farmer. These and other stories only reached my attention because of the accounts and recollection of my grandmother Ekatarina, who as a young child spent much of her time helping her father in his workshop - making nails and operating the bellows. She was a matriarchal Wikipedia of recipes, birthdays, and family feuds, but also the conduit to many stories about her father. Including that of the subject of this video, a walking stick made from playing cards. Which I am attempting to make, beginning with the method of preparing the cards.00:00 Introduction01:12 CPL Pressing machine02:19 Previous version (2010)02:58 CAD design03:44 Die cutting/creasing former04:34 Location pins05:49 Like an episode of Seinfeld07:11 Confronting the evil08:44 Routering09:03 Adjusting the pressing machine09:48 Playing card holding jig version 112:29 Playing card holding jig version 2Artist CV: miscpro.com/artist-cvInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
P1 Introduction - The Playing Cards Walking Stick Savvas Papasavva 2023-07-08 | I am revisiting a work I made in 2010. A walking stick made using playing cards. One similar was purportedly made by my great grandfather who was a blacksmith in the village of Komi Kebir in what is now Northen Cyprus. But the original artefact was lost, and it only came to my attention through the accounts of my relatives and in particular my late grandmother, Ekaterina. In this video I introduce the characters that make up part of a family mythology, and begin the process of documenting its making.Artist CV: miscpro.com/artist-cvInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Tube Train Moquette Seat Cover – Upholstering / Piccadilly Line / Stool Refurbishment Savvas Papasavva 2023-05-08 | In this video, where I develop a newfound respect for anyone who can upholster, I add wadding and the Piccadilly Line train moquette pattern (UPSIDE DOWN) onto an old high backed bar stool which I use while I edit. I also remodelled and 3D printed some spare clips for the stools seat. I wouldn’t call this upcycling project, and instead borrow a term from TFL – refurbishment. And yes, I know I put the moquette pattern upside down, but this is what happens when you try to do something for yourself afters spending a full day working in education.00:00 Materials I’ll be using thick needle wadding, a scrap bit of Piccadilly Line moquette that I bought from the Acton train depot, my old Ikea bar stool which I use as an editing chair. I will also use a staple gun, screwdriver, pencil, scissors, a canvas pliers plus a few other bits and bobs.00:29 Seat clipsThis bit is broke - I’ll 3D print new parts later.00:34 Removing back-rest01:04 CAD modelThe clips allow the chair to be lifted without it closing and possibly catching fingers. I would like to reintroduce this to the chair but I have to make my own. I modelled these in Fusion 360. You can see the stages roughly outlined on screen. 01:28 SeatAfter removing the arse-rest I cut the wadding to size and stappled it onto the edge. I don’t think this is normally practice especially as I’m not folding the wadding under the seat, but felt like a good idea for a novice.02:02 Sheering the sheep02:22 Moquette to seatThe block that I used to raise the seat into different positions really helped me reach and manipulate the fabric onto the wooden seat.03:30 Pleating the edgesI decided to go for symmetry instead of invisible edges. I don’t have enough skill to get this right in the time frame I wanted to finish. I had to cut a lot of material away as the fabric is really thick.05:07 Seat doneDoesn’t look too bad despite having put the moquette the wrong way around. The wadding is dusty btw, so I kept hoovering as I went along. If I was doing this professionally, I would have an air scrubber in the background.05:36 BackrestMore of the same with the backrest.07:07 Reassembling backrest07:22 More screwsI added additional screws as the back rest was slightly pushed outwards by the new material and the original screws were not holding properly.07:55 Linoleum coverI added some linoleum to the back rest to cover my terrible handywork. A sign of a good maker is knowing how to hide their mistakes. If no one has told you this before, now you know.08:23 Hollow punch08:53 The finished chairInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Simple Pillar Drill Table - 18mm MDF / CNC Template / Meddings L2 Savvas Papasavva 2023-04-09 | In this video, I assemble a MDF worktop with a rotatable sacrificial insert for a floor standing Meddings pillar drill. This is designed to be CNC cut out of 18mm MDF, and used to increase the work area which support large woodworking pieces. It also provides more space to clamp material down, and to generally make drilling safer, comfortable and more precise.00:00 Parts & Fixings• 4@ M12x50mm Hex Bolts• 4@ M12x40mm Washers• 4@ M12 Nuts• 1@ Sacrificial Insert• 1@ Top Section• 1@ Middle Section• 1@ Bottom Section• 5@ M5x50mm Wood Screws01:05 CAD model in Fusion 360I designed this back in 2018 in Fusion 360, and periodically machine them out when I need to replace parts on the drills I look after. This is a no thrills, simple version with no additional features. Any jigs need can be mocked up specifically for the task or made as a separate attachment. There are thumb holes for lifting the disc out when necessary.01:26 CNC CAM Software – Vcarve ProI nest the parts which auto arranged them to make the most economical use of the material. I will also cut out an additional disc insert to have as a spare. I will need roughly 760x1220mm of 18mm MDF for this cutting job. The scraps from this job will go into a recycling box to use for smaller projects. I tool up my inside cuts first – using tabs for the larger opening within the top section. I set a last pass thickness of 1mm to clear out MDF dust from the cut line and minimise the amount I might get exposed to when cleaning up the pieces. Other important things to pay attention to include the cut line being on the correct side of the vectors, inside in this case, and to select a conventional direction for the cutting path. After which I tooled up the outside toolpaths, with 2-4 tabs per piece of ensure the objects don’t move when being cut free from the larger MDF workpiece.03:10 Toolpath SimulationIt can be a little boring watching a CNC montage, so I will not share that. But before any cut it is important to simulate the cut and try look for any anomalies. This can prevent you ruining a cutting job, wasting material, or damaging the CNC machine. 03:32 Assembly Process & InstallationI place the M12x50mm bolts into the metal sub-table slots and align the holes of the bottom MDF section. Ensuring the handle is clear of the MDF, I loosely hand tighten all four M12 nuts with their washers underneath. I then place the middle MDF section above the bottom, adjusting the washers slightly so the edge of both pieces become flush before clamping them in place and fully fastening using an impact driver. The top section is now clamped into place and all three MDF section can be screwed together using 50mm wood screws.05:52 The Good The Bad And The TechnicalThe clamps can be removed, sacrificial disc inserted, and now the drill is ready to use.Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
32mm Badge Button Maker Kit and Punch Die Cutter Savvas Papasavva 2023-02-04 | 32mm Badge Button Maker Kit and Punch Die CutterInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Café Frappé | The Myth Of Makers Coffee | Builders Coffee Savvas Papasavva 2023-01-14 | 00:00 Café Frappé | The Myth Of Makers Coffee | Greek Builders CoffeeRecipe:3 teaspoons instant coffee, 3 teaspoons of sugar, 2 fingers of water, Shake jar to combine, Place ice cubes into the glass, Pour foamed coffee over, Topping with water and straw.Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
First Layer Adhesion - 3D Printer Bed Mesh Levelling Mods - Prusa Mini+ & i3 MK3S+ Savvas Papasavva 2022-12-24 | In this video I share the modifications made to my Prusa Mini+ and i3 MK3S+ to improve first layer adhesion - especially for larger or multiple models which span the entire print bed. This is based on already existing mesh levelling mods which I've linked to below. This along with the squaring calibration were essential for the mini - and highly desirably for the i3. I also make alterations to these mods - using shim washers instead of silicone for the mini, and testing helicoil style thread repair inserts for the mini to mimic the process of the i3. Hope this provides some guidance for anyone attempted to modify their machines and improve their prints.00:00 Prusa Mini Intro00:45 Mini Workflow Sources01:02 Shim Washers01:15 Disclaimer01:33 Alternative Idea02:08 Prusa Mini Shim Mod04:02 Replacing Shim Spacer05:09 Mini Modification Results05:29 First Layer Calibration Print06:20 Prusa i3 MK3S+ Intro07:16 Mini and i3 Differences08:03 i3 Workflow Sources08:23 Prusa i3 Mod09:11 Making Screw Adjustments09:30 Oops Oops Opps10:32 Linear Bearings11:12 i3 Modification Results11:23 First Layer Calibration Print 212:00 Helicoil Style Thread Repair Kit12:44 DIY 3D Printed Drill Guide13:57 ConclusionPrusa Mini Silicone Bed Levelling Mod: github.com/bbbenji/PMSBLMforum.prusa3d.com/forum/user-mods-octoprint-enclosures-nozzles/prusa-mini-silicone-bed-leveling-modPrusa i3 Nylock Mod: reddit.com/r/prusa3d/comments/bp440f/full_guide_to_doing_nylock_mod_if_you_havent_yougithub.com/PrusaOwners/prusaowners/wiki/Bed_Leveling_without_Wave_Springsrearvuemirror.com/guides/nylock-mod-for-the-mk3sInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Creality Sermoon V1 Pro - 3D Printer or Microwave? Savvas Papasavva 2022-09-09 | Spoiler alert, it's not a microwave. I was sent a Sermoon V1 Pro to review free of charge by Creality. Thought and opinions are my own.00:00 Unboxing00:50 Unwrapping02:11 Stuff In The Box02:37 Loading PLA Filament03:26 Menu03:59 Bed Levelling05:17 Door Pause Feature05:48 A Microwave05:54 Model Release06:07 Existential Crisis06:23 Print SettingsInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite Article and Config File for Prusa Slicer: miscpro.com/?p=9739Link to products: technologyoutlet.co.uk/collections/creality3d-3d-printers/products/creality-3d-sermoon-v1-pro-3d-printer & shrsl.com/3pov6
My Drills - Good Bad And Ugly (Plus Goodbye Studio/Workshop FOREVER) Savvas Papasavva 2022-08-06 | My Drills - Good Bad And Ugly (Plus Goodbye Studio/Workshop FOREVER)00:00 Panasonic02:48 Fein04:49 Hoto08:01 3D Printed Belt Clip08:57 Scary Fake Makita10:12 Goodbye Studio/Workshop11:14 ConclusionInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Drawing Guernica (again and again) Savvas Papasavva 2022-05-02 | In this video I draw Guernica as a compressed horizontal line, while ignoring the warning of my smoke alarm. Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
DIY Mini Desktop Tripod - Project Mount / 3D Printed Savvas Papasavva 2022-03-20 | 00:00 Intro00:23 Deconstruction01:00 Version One01:40 3D CAD Model02:43 Slicer Workflow03:45 Ubiquitous Printing Shot03:53 Assembly ProcessThis is a very simple low-level micro tripod, which I made to hold a mini projector. The original tripods was made from injection moulded plastic apart from the 1/4" threaded screw, and one of the legs broke off because the pivot mechanism was only a few mm thick. I decided to make a new one, using metal shelf pins to create the pivot for the legs. I CAD modelled the design and 3D Printed the parts with the first version only push fitting the two parts of the head sections together, thus popping apart when too much weight was added. The second version included through holes to secure parts together, but the legs were too short and projector became top heavy. I made subsequent versions with longer legs and protrusions on the legs to prevent them from being over extended when closed, which could damage the parts. Website Article: miscpro.com/2022/03/20/3d-printed-mini-desktop-tripodInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvas
Do Electric Toothbrushes Dream of Wind Turbines? Savvas Papasavva 2021-11-01 | Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
CNC Pen Holder / Drawing Tool Assembly - 3D Printed DIY Kit Savvas Papasavva 2021-09-25 | In this video I share the assembly process for a 3D printed drawing tool or pen holder, which is use with a CNC router. I've used this tool with my CNC machine to produce drawings. Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Three 3D Printed Tools / Sawing, Squaring & Drilling Jigs Savvas Papasavva 2021-08-29 | In this video I share three 3D Printed tools I designed and made. These include a magnetic sawing guide, a dial gauge tramming (squaring) tool, and an elaborate drill guide rig. Two are available for free via my website and thingiverse while the last is sold as alongside a illustrated manual. These could all be useful design technology activities for students to learn about 3D printing and fabrication.Saw Guide: miscpro.com/2021/02/14/adjustable-magnetic-saw-guide-3d-printedSquaring Tool: miscpro.com/2020/04/26/dual-dial-gauge-tramming-tool-for-cnc-spindleDrill Guide: miscpro.com/2021/03/30/adjustable-drill-guide-kitInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Nut Riveter - How to Savvas Papasavva 2021-06-14 | This is little video about using or how to not use or nut use a riv-nut or rivet nutter. Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Pivoting Drilling Stand Rig / Guide Tool / 3D Printed, Adjustable & DIY Savvas Papasavva 2021-03-30 | In this video I design and make an adjustable drill guide – using 3D printable parts and common linear motion parts. 00:00 Intro01:19 The segmented folly03:07 A very nice soup03:58 Heated threaded insert tool04:44 Bearings and drill shaft05:14 Polymer bearings05:40 Inner circlips06:28 Fitting drill chuck06:43 The unusual hammer07:21 Trunnions and pivots08:05 linear rails08:47 Top brace09:09 Centring pins09:35 How centred in the chuck?09:50 ConclusionIf you would like to buy the manual and 3D Printed files those are available via: http://www.miscpro.com/shopInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvas
Algorithm God Deity - How To Make One? Savvas Papasavva 2021-02-21 | In this video I make an algorithm god - Thumbulous, the patron deity of like button. Worn on the thumb to bring luck while navigating the online realm or uploading content for mass-ignoring.The STL file: thingiverse.com/thing:4770426Also see:How To Make A Kiln God - youtu.be/W63XmimkVy0****Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Cut Like A Pro! Magnetic Saw Guide / 3D Printed, Adjustable & DIY Savvas Papasavva 2021-02-14 | In this video I make a 3D printed magnetic saw guide based on the Nobex 505. The tool can be 3D printed and easily assembled to commonly available parts. I'll link to the downloadable files in the comments once they are up. 00:00 – Talking 01:12 – No Talking05:18 – Talking 06:19 – Talking About Redesign06:43 – No Talking07:14 – TalkingInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Virtual Casting Mould in Blender - 3D Printed Cast / Peanut Candle Savvas Papasavva 2021-02-05 | In this video I'm going to share the workflow to subtract a 3D model from a larger virtual 3D model in blends - and to form a cavity which can be split and used as a casting mould. 00:00 - Intro00:30 - Moving and Transforming 02:05 - Big Nuts02:39 - Remeshing03:55 - Making Virtual Cast05:20 - Boolean Modifier05:19 - Splitting The Cast06:39 - Real LifeInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
3D Scanned Peanut - Photogrammetry Workflow Agisoft Metashape Standard Savvas Papasavva 2021-01-25 | In this video I share how I created a 3D model of a peanut. 00:00 Intro01:03 Turntable01:25 Backdrop Support Structure02:22 Green Chroma Key Backdrop02:58 Specimen Stand03:32 Dice04:02 The Peanut04:29 Reflective Card04:40 Turntable Software06:10 Camera Settings07:39 Background Photo08:08 Agisoft Metashape Standard Worflow14:28 Peanut CandleAffilaited Link:USB Ring Light in Video: banggood.com/custlink/K3mRiP71IjInstagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Prusa Mini + / Squaring X Y Axis Skew Savvas Papasavva 2021-01-07 | Here's a quick video on squaring the X-Z section of the Prusa Mini to the Y axis. In particular the overhanging arm to the heated bed. For some reason this aspect of the assembly process is completely ignored in the manual - and while the printer makes aesthetically pleasing prints, and the first layer calibration and bed mesh levelling is great, it is difficult to get accurately square prints without performing these steps. If I had known this I'd have probably bought the MK3S+ kit.My Top 3D Printers: miscpro.com/top-3d-printersMy calibration prints available here: thingiverse.com/thing:4140075Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Workshop Dust Extractor & Air Filter / HepaFlo / Carbon Filter / Numatic NV750 & Craft AC15AFS Savvas Papasavva 2020-11-07 | By new I mean I bought a new dust extractor and air filter to replace the couple I cobbled together. Unfortunately I had to get rid of my older pieces of kit while moving up into this space but both these tools are much smaller. The old extractor was just too large, and while the air scrubber has good airflow through the G4 filter I didn't manage to make the carbon chamber as I'd liked.0:00 - Air Filter Scrubber AC15AFS 2:01 - Me Being A Cheeky Git3:51 - Carbon Filters7:59 - Numatic Dust Extractor NV750 Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvas
How To Make MDF Coloured Houmous! Savvas Papasavva 2020-08-15 | In this video I make my some MDF coloured houmous, which I'll put in a sandwich and take to the studio...Instagram: http://instagram.com/savvas_papasavva CNC Channel : http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Turn a Photo into a Drawing / Diagram / Illustration Savvas Papasavva 2020-04-22 | In this video I demonstrate how I created an illustration from a photo of a tape measure which I then annotate. This is to use for instructional documentation and teaching material. I've made similar things for my CNC machine - however from 3D model I drew or built in virtual. The software I am using is called Fusion 360 - which I've become quite dependent on since learning. Once I have the vectors, I can export those into another software like illustrator or inkscape to add the final detail. If you want use the image in a document link word - save or export the vector as an .SVG file and import. This way you keep the vector information and it is scalable without looking quality.00:00 - Intro00:14 - Fusion 360 Process01:12 - Calibrate Image02:26 - Create A Sketch06:35 - Export Vectors07:06 - Illustrator09:12 - My CNC ManualInstagram: http://instagram.com/savvas_papasavva CNC Channel: http://youtube.com/EducatingSavvas Website: http://www.miscpro.com
Selfie Plop - Toilet Roll Tube Monopod / Mobile Phone Filming Kit DIY Savvas Papasavva 2020-04-09 | In this video I bricolage a filming tripod for my mobile phone using a couple toilet roll tubes and a pair of scissors. 00:00 - Intro00:48 - The Joining01:25 - Example Footage01:52 - Conclusion Instagram: http://instagram.com/savvas_papasavva Website: http://www.miscpro.com
Camcorder Shoulder Harness Repair + Meet Moot_One Savvas Papasavva 2020-04-04 | In this video I cut some cork on my CNC machine - the Moot_One, which I designed and built. The cork is to replace some neoprene rubber on a camcorder should harness. I filmed this quite a while ago, and was able to edit it during the lock-down. 00:00 - Intro01:40 - Vector Drawings And Toolpaths04:16 - Moot One CNC05:45 - Speeds And Feeds07:15 - Fitting Cork Parts08:30 - ConclusionHere is some information for UK viewers which might be helpful during this time:covidmutualaid.orgtheguardian.com/world/2020/mar/16/covid-19-mutual-aid-how-to-help-the-vulnerable-near-youInstagram: http://instagram.com/savvas_papasavva New Channel: http://youtube.com/EducatingSavvas Website: miscpro.com/contact
Toilet Paper Face Mask (But Seriously Wear Your Mask) Savvas Papasavva 2020-03-20 | Me reacting to panic buying toilet paper. In many Asia countries, people are taught to wear face-masks to prevent the spread of pathogens they might carry. In many western countries the trend of wearing masks is about protecting the individual wearer. Nurses and doctors are the exception, who wear masks knowing they are still at risk. But the idiot walking down the street is most likely doing it for their own selfish preservation. There is no cure. There is no quick fix. Just stay home and learn to do nothing. And if you have to use public transport or enter a shop, use a mask as they are only effective if everyone wears them.Instagram: http://instagram.com/savvas_papasavva New Channel: http://youtube.com/EducatingSavvas Website: http://www.miscpro.com
100k Subscribers Hasnt Changed Me... Savvas Papasavva 2019-12-02 | So I finally reached 100k subscribers - and to celebrate I've made this simple video looking at the current room I'm set up in, as well what I'm working on and a little message to the British public before the next general election. I'm still waiting for by block of soap from YouTube btw.My new favourite channel at the moment (Dutch Wogan): youtube.com/channel/UC-DYnJtsTeIYL61yoQrp-0AInstagram: http://instagram.com/savvas_papasavva CNC Channel: http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
DIY Edgebanding Laminate Trimmer Savvas Papasavva 2019-10-04 | In this video I use up some old footage and share a DIY edge-banding trimmer I built. Instagram: http://instagram.com/savvas_papasavva New Channel: http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
CNC Drawing Tools - 3D Printed Pen Holder Savvas Papasavva 2019-08-18 | In this video I share some drawings tools I made - and the drawings I eventually produced on my CNC machine. I took this machine to maker central 2019 and wanted a way of demonstrating it without using the noisy dust producing spindle - so drawings made a lot of sense. The latest CNC machine designs are available on my website: http://www.miscpro.com/shopVideos about the CNC machine are available: http://youtube.com/EducatingSavvasInstagram: http://instagram.com/savvas_papasavva
How To Stop a Door Closing Savvas Papasavva 2019-07-09 | Instagram: http://instagram.com/savvas_papasavva Website: http://www.miscpro.com
Super Simple Clamp Rack Savvas Papasavva 2018-12-30 | Something simple to end the year. In this video I make a super simple clamp rack – coz simple things are super. Using some random crap I found on the street, and some other random crap I already had I made something.Instagram: http://instagram.com/savvas_papasavva Patreon: http://patreon.com/educatingsavvasWebsite: http://www.miscpro.com
Making a Super Chisel from Old Plane Iron Savvas Papasavva 2018-11-24 | In this video I make a large super chisel using an old rusty plane iron. 00:00 - Cleaning And Sharpening Plane Iron01:19 - Paper Cut Test02:28 - Prepping Timber03:45 - Computer Part04:20 - CNC Router Part 104:59 - Fitting And Gluing Two Parts06:42 - CNC Router Part 208:07 - Flipping The Handle08:32 - CNC Router Part 309:00 - Hand Finishing09:48 - Oiling And ConclusionInstagram: http://instagram.com/savvas_papasavva New Channel: http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
Basic Chisel Sharpening Skills / MAD ASSASSIN SHARP Savvas Papasavva 2018-10-14 | In this video I demonstrate a simple method to sharpening chisels using a honing guide. I use a simple 400/1000 diamond stone, a 8000 whetstone and then strop with Autosol Metal Polish on the back of a orbital sanding disc. It really is that simple.Instagram: http://instagram.com/savvas_papasavva New Channel: http://youtube.com/EducatingSavvasWebsite: http://www.miscpro.com
