[21-22] ASSA V-10 Mogul picked and gutted Hvmetalhead 2021-01-02 | #locksport, #pickandagut #ASSA #V-10 #blackbeltlockASSA V-10 Mogul pick and gutted. Big shout out to PickSecure for supplying me the lockThere is no audio as my kids were making a ruckus in the background so I muted audio. 12:15 Lock opened13:30 side pins removed, I then look for two of the side pins that fell into the follower14:40 side pins and springs found15:15 key pins removed 16:15 drivers removed17:30 close up of counter milling in core18:20 close up of sidebar slot18:35 close up of side bar19:00 close up of pins and guts
[21-37] CL Pi Hvmetalhead 2021-08-14 | Thank for this challenge lock forwarded to me from Lethal Logic.
[21-36] CL-OpenSourceFan pick and gut Hvmetalhead 2021-05-17 | A fun blue belt challenge lock. Give. To me by a fellow Canadian. Lots of fun. But for some reason I couldn’t upload the video in its full form so I had to cut my first attempt out. Thank again openaourcefan
[21-33] SpeedLock.org Masterlock#3 MrsMetalhead picks her first lock on camera Hvmetalhead 2021-03-30 | SPP master #3 staring MrsMetalhead. I have been picking for a while and she have been complaining about my hobby for even longer. Today I bought a cheap suitcase lock from the dollar store for $0.50 and all you had to so was jam a hook and it was open. And I finally convinced her to give it a shot. And she got it. So then I showed her how to pick an master #3 and she was so excited when it open. And I was even more excited. Nice work MrsMetalhead. Proud of you.
[21-32] ASSA D12 pick and gut Hvmetalhead 2021-03-23 | Assa D12 with barrels spools and the annoying bi-cut key pinsWas given to me from a fellow LPU member. Please check out his YouTube channel. youtube.com/channel/UCSfQIvkCM3Byox4s3BHSvTQHe is a very talented picker and a great guy.
[21-34] ASSA 600 barrels pick a d gut Hvmetalhead 2021-03-23 | Assa 600 with barrels spools a gift to me from a friend. Please check out his YouTube channel. youtube.com/channel/UCSfQIvkCM3Byox4s3BHSvTQHe is a very talented picker and a great guy.
[21-31] #lockofthemonth master #3 Hvmetalhead 2021-03-07 | Speedlocks.org. Lock of the month master lock #3
[21-29] Medeco Biaxle 4 pin pick and gut Hvmetalhead 2021-02-15 | #Speedlocks #locksport #MedecoPlease forgive the poor audio quality. This is my first video I have done with a voice over. My original audio from the video was terrible so I removed it and tried to add it in later Here is a pick and gut of a Medeco Biaxle 4 pin. It’s out of a old pay phone. The lock was gifted to me by U/bitsynthesis in care package sent to me back in my orange belt days. I tried it a couple times back then, but it was way above my skill level. And it’s been sitting in the naughty bucket ever since. Until just recently I decided to pull it out and give it another go. And what do you know. Further info on the medeco biaxle: http://lockwiki.com/index.php/Medeco_BiaxialPlease visit http://speedlocks.orgSpeedLocks.org is the premier speed-picking site on the internet, and has been serving the greater lock-sport community since 2021. It was built on the unified vision of promoting and preserving locksport. By creating an extensive catalog of speed-picking world records, we believe we will create a better community of collaboration and competition. We hope you have fun and as always, keep on picking!
[21-27] speed pick Masterlock 410 5.43 second Hvmetalhead 2021-02-08 | #masterlock #410loto # locksport #speedpickingMy personal best. And what I believe to be a current world record. Master lock 410 LOTO picked is 5.43 seconds. Please check out speedlocks.org to see the current standing on the 410 and many other locks
[21-26] #RPspicyASSA speed picking a master 410 loto Hvmetalhead 2021-02-05 | #RPspicyASSA #speedpickingMy best time yet. Masterlock 410
[21-25] #RPSpiceyASSA master lock Hvmetalhead 2021-02-03 | #rpspiceyassa#1millionscovillelocksportclubspeedlocks.org/green-master-lock-410-lotoCongratulations to Roonpicker on the red belt achievement. Great work buddyMy entry into the speed pick of the master lock 410. Subtracting reaction time of .65 of a second I am calling my official time 15.90. If not please accept the screen time of 16.55. It’s a fun challenge and I encourage everyone to give it a shot
[21-24] #HVlogic100 give away entry 5 pin with security pins Hvmetalhead 2021-01-24 | Big shout out to HVLogic. I want to congratulate you on the 100 + subscribers. Great workI didn’t have any security pin locks that weren’t high security, so I through some challenge pins and factory security pins into a 5pin wiser. Using my retired pair of fire service super gloves, they are dried out, split seams, and about 1/2” thick. HVLogic. A truly diabolical challenge. Thank buddy
[21-23] MagicCrashMaster Challenge lock Hvmetalhead 2021-01-20 | I had the honor of receiving a challenge lock from an up and coming blue belt. MagicCrashMasterIt put up a good fight. The T-pins threw me off. And the threaded chambers in the core gave some crunch. Once again thanks for sharing and I enjoyed picking it
[20-21] #1MillionScovilleLocksportClub my entry into the million Scoville club Hvmetalhead 2020-12-11 | #1MillionScovilleLocksportClubI did it. I am took the Source hot sauce 7.1million Scoville Heat units. I don’t recommend trying thisI couldn’t even concentrate enough to pick a simple lock.challenge-lock.com/1millionscovillelocksportclub
[20-20] MTL 7x7, ACE padlock, Masterlock 20mm. Care package from Snow. Picked Hvmetalhead 2020-12-03 | #locksport, #lockpick, #multlock #masterlockI won the multlock 7x7 from snows giveaway, and he included a couple extras in the package including a SFIC, MTL 7x7, Ace padlock and a master lock 20mm. The spools in the ace came as a surprise and gave me some trouble, that tiny keyway in the master was a pain to work around without over setting pin 3. And the Mtl 7x7 was a fun lock with great feedback. Snows channel:youtube.com/channel/UCJy6QTw-Wf7_uAi1Oyf0fBg
[20-19] American 1100. Key pin fell out the bottom, how to fix Hvmetalhead 2020-11-14 | How to fix the key pins falling out on a American 1100 core. This will also work with the “rattle club” master 410Remember you need to over set the driver. Or else get the shim between the spring and the driver.
[20-18] Mul-T-Lock interactive 4 pin serrated. Pick and gut Hvmetalhead 2020-11-04 | #lock sport, #MTL, #dimple lockThis is a 4 pin-in-pins serrated Mul-T-Lock with and interactive element. 9:30 outer pins set9:50 inner pins set 10:30 realize my follower is nowhere to be found13:30 interactive element shownI would like to thank artichoke for gifting me this lock. It’s my first dimple. And the deeper end of dimple locks to be jumping off of.
[20-17] #bad100 Hvmetalhead 2020-10-28 | Worst lock in my collectionMy entry into bad 100 giveawayFlat head off my keychain multi tool. Force the core. Also if you just pull hard on the shackle it opens
[20-15] Medeco biaxle pick and gut Hvmetalhead 2020-10-02 | #locksport, #medeco biaxle, Medeco biaxle 51S pick and gutI was in the middle of a zoom meeting, and wasn’t expecting to get an open, but I finally got it on video. Do to the nature of the meeting I had to remove the audio
[20-14] Medeco biaxle attempt. Hvmetalhead 2020-09-21 | I attempted this medeco biaxle for the last couple weeks. And no luck yet. Got one open off camera. This is a longer video. And you can see me doing everything I can think of. I even put my ear up to it to really hear those pins and see if it was a good jiggle test or a light spring. #locksport, #lockfail, #skunked
[20-13] #snow50 my entry into snow’s giveaway Hvmetalhead 2020-09-20 | #snow50Congrats snow on hitting 50 subscribers. Here is my entry into your give away. Just grabbed a random 6 pin kik profile from my lock bucket. No idea where I got it. But I got it opened on video.
[20-12] #hotlock LPU contest Hvmetalhead 2020-09-07 | #hotlock, #locksport, #lockpickersunited, #LPUMy entry into bonx hotlock give awayIt might have only been a couple minutes but I swear it felt like 6 minutes. Master 6835, home made hand sanitizer for the heat source. I added the paper because the flame although hot was impossible to see on camera. Remember kids don’t try this at home
[20-10] PLS drill smith challenge entry Hvmetalhead 2020-09-03 | #drill smith, #contestMy entry into PLS discord drill smith contest
[20-09] Yale 5802A pick and gut Hvmetalhead 2020-08-27 | Yale hight security 5802A KIK cylinderPart or the Yale 5000 series of locks7 top pins, 2 standards 5 spools. An active side bar with 5 fingers. Exact having what I describe as a true gate and a false gate above and below the true gateA fun lock to pick with very little feedback on the side bar. Pin 6 and 7 kept drop down as I set one the other would fall. And then lock up fairly solid. So you will see I set the side bar a couple times and a very deep false set as I am stuck on the spool. Set the spool and drop in to another false set as the other pin fell. Eventually got both to stay up and picked the side bar for the open#lock sport, #yale, #pickandgut
[20-08] Yale high security 5802a picked Hvmetalhead 2020-08-22 | Yale’s 5802a 7 pin with 5 pin sidebar. Part of the Yale 5000 high security seriesI over set a side pin and had to get aggressive to get it to shake loose5 spools and 2 standardsAs far as I can tell this is the first video of this lock being open I have found. Unfortunately I got so excited at the open I forgot to record the gutting. Will have to redo it and film the gutting in one take#yale5000, #locksport, #pickandgut
[20-06] American 1100 blue belt attempt Hvmetalhead 2020-03-21 | American 1100 pick, gut, reassembled, and repicked I used a little more tension then others. But hopefully you can hear the serrations and see the counter rotation. 2:00 I over set a key pin and lost the false set. I used a pit of bouncing tension and shaking the pick to try and release the key pin. It worked2:30 lock openedI thank my wife for holding the camera
[20-04] Quick shout out to all my friends coronavirus-19 Hvmetalhead 2020-03-17 | Stay safe out there. Stay home, don’t go out of your don’t need to. Don’t go out panic buying. And follow the direction of your local authority. Hopefully we will all look back at this and all have stayed healthy.
[20-03] Master lock 6835 quick pick ghosteds 100 subs giveaway entry Hvmetalhead 2020-03-10 | #ghosteds100 lock pick give away. My entry to your contest. Congratulations on 100+ subscribers
[20-02] American 1100 picked and gutted blue belt attempt Hvmetalhead 2020-03-09 | American 11002:30 picked3:00 disassembled3:50 core out removing key pins4:35 removing security pins from bible5:25 springs removed6:04 close up of pins and reassembly begins
[20-01]Master lock pro series 6835 pick and gutted green belt attempt Hvmetalhead 2020-03-02 | Master lock pro series 6835 pick and gutted1:39 picked2:00 cylinder out2:10 core removed from bible2:52 key pins removed3:20 bible pins removed 1-4 spools 5 serrated 4:35 close up of guts7:05 re assembled back together7:55 repick
Making a tooth brushing video get ruined Hvmetalhead 2019-12-30 | Hilarious antics of the siblings ruin a video
![[21-22] ASSA V-10 Mogul picked and gutted](https://i.ytimg.com/vi/2gy6Dxq7Ddo/maxresdefault.jpg)