Simadthe application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4
the application server could not be contacted pgadmin 4Simad2018-09-11 | the application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4 the application server could not be contacted pgadmin 4The connection to the server localhost:8080 was refused – did you specify the right host or port?Simad2022-09-08 | [Solved] The connection to the server localhost:8080 was refused – did you specify the right host or port?Enable Internet Access on Kernels KaggleSimad2020-08-18 | Internet is not enabled for this kernel. Internet is required to connect. On the right side of the kernel, you will see the settings you can enable the Internet there Install an external package and disable internet connection in a kernelcreate repository in google colabSimad2020-08-18 | create repository in google colab create repository of images google colab deep learning data science object detection kerasAttributeError: module tensorflow has no attribute appSimad2020-07-06 | Try to use: import tensorflow.compat.v1 as tf AttributeError: module 'tensorflow' has no attribute 'app' AttributeError: module 'tensorflow' has no attribute 'app' AttributeError: module 'tensorflow' has no attribute 'app'Impossible d’ouvrir l’application « Anaconda-Navigator ».Simad2020-07-06 | Impossible d’ouvrir l’application « Anaconda-Navigator ». Impossible d’ouvrir l’application « Anaconda-Navigator ». Impossible d’ouvrir l’application « Anaconda-Navigator ». AnacondaHow to Install labelImg in MacSimad2020-07-03 | LabelImg is a graphical image annotation tool. It is written in Python and uses Qt for its graphical interface. Annotations are saved as XML files in PASCAL VOC format, the format used by ImageNet Besides, it also supports YOLO format.instead of org.springframework.boot:spring-boot-starter-parent,please verify your project structureSimad2018-10-24 | The problem occurs because Maven by default assumes that the parent pom is found in the parent folder of the one that contains the module pom. However, in your project that does not seem to be the case: Your parent pom is org.springframework.boot:spring-boot-starter-parent:1.5.6.RELEASE while the pom com.xxx:parent:1.0.0 in the parent folder is only used as an aggregator for the modules.
To solve this problem you need to unset the relative path in the parent declaration in the module poms like this:
relativePath
How to fix the WARNING message while running “mvn clean install” How to fix the WARNING message while running “mvn clean install” How to fix the WARNING message while running “mvn clean install”Add a column with a default value to an existing table in SQLSimad2018-10-11 | Add a column with a default value to an existing table in SQL Add a column with a default value to an existing table in SQL Add a column with a default value to an existing table in SQL Add a column with a default value to an existing table in SQL SQL SERVER – Add New Column With Default Value SQL SERVER – Add New Column With Default Value SQL SERVER – Add New Column With Default Value SQL SERVER – Add New Column With Default ValueindexOf method in an object array JavaScript typescriptSimad2018-10-11 | indexOf method in an object array? indexOf method in an object array? indexOf method in an object array? indexOf method in an object array? La méthode indexOf() renvoie le premier indice pour lequel on trouve un élément donné dans un tableau. Si l'élément cherché n'est pas présent dans le tableau, la méthode renverra -1.how to set start value as 0 in chartjsSimad2018-10-11 | how to set start value as “0” in chartjs? how to set start value as “0” in chartjs? how to set start value as “0” in chartjs? how to set start value as “0” in chartjs? Chart.js axes always show zero Chart.js axes always show zero Chart.js Bar Chart - how to chart bars from 0 Chart.js Bar Chart - how to chart bars from 0 Chart.js Bar Chart - how to chart bars from 0NumberOf element Object javaScriptSimad2018-10-09 | NumberOf element Object NumberOf element Object NumberOf element Object NumberOf element Object Number of elements in a javascript object Number of elements in a javascript objectRemove duplicate values from JS array [duplicate]Simad2018-10-09 | Remove duplicate values from JS array ;duplicate Remove duplicate values from JS array ;duplicate Remove duplicate values from JS array ;duplicate Get all unique values in a JavaScript array (remove duplicates) Get all unique values in a JavaScript , typescripte angular array remove duplicatesFormat date in TypeScript AngularSimad2018-10-08 | Format date in TypeScript Angular Format date in TypeScript Angular Format date in TypeScript Angular Format date in TypeScript Angular
Angular Tips: Formatting Dates (dd/MM/yyyy) Angular Tips: Formatting Dates (dd/MM/yyyy) Angular Tips: Formatting Dates (dd/MM/yyyy) formatDate formatDate formatDateFinding enum value with Java 8 Stream API | Best way to create enum of strings?Simad2018-10-02 | Iterating over Java Enum Iterating over Enum Values in Java Best way to create enum of strings? Java enum with string values Finding enum value with Java 8 Stream API Iterating over Enum Values in JavaPlease make sure it is in your tsconfig via the files or include propertySimad2018-10-01 | Please make sure it is in your tsconfig via the 'files' or 'include' property
app.module.ts is not part of the compilation. Please make sure it is in your tsconfig via the 'files' or 'include' propertyGit SVN error: a Git process crashed in the repository earlierSimad2018-09-28 | Git SVN error: a Git process crashed in the repository earlier Git SVN error: a Git process crashed in the repository earlierGit SVN error: a Git process crashed in the repository earlier Git SVN error: a Git process crashed in the repository earlier How to fix `rm -f .git/index `How to fix `rm -f .git/index` How to fix `rm -f .git/index`change cursor to finger pointer html CSSSimad2018-09-28 | change cursor to finger pointer change cursor to finger pointer change cursor to finger pointer Changer l'aspect du curseur en CSS Changer l'aspect du curseur en CSS Changer l'aspect du curseur en CSS Changing the Cursor with CSS for Better User Experience (or Fun) Changing the Cursor with CSS for Better User Experience (or Fun) HTML CSSHow to display a JSON representation and not Object Object on the screenSimad2018-09-28 | How to display a JSON representation and not Object Object on the screen How to display a JSON representation and not Object Object on the screen How to display a JSON representation and not Object Object on the screen how to print json data in console.log Print JSON parsed object? Print JSON parsed object?Disable click outside of bootstrap modal area to close modalSimad2018-09-27 | Prevent Bootstrap Modal from disappearing when clicking outside or pressing escape? Prevent Bootstrap Modal from disappearing when clicking outside or pressing escape? Prevent Bootstrap Modal from disappearing when clicking outside or pressing escape? Disable click outside of bootstrap modal area to close modalDisable click outside of bootstrap modal area to close modal Disable click outside of bootstrap modal area to close modalcompare string typescriptSimad2018-09-25 | compare string typescript compare string typescript compare string typescript compare string typescript compare string typescript compare string typescript compare string typescriptgestion de fil dariane angularSimad2018-09-25 | gestion fil d'ariane angular gestion fil d'ariane angular gestion fil d'ariane angular gestion fil d'ariane angular UN SYSTÈME DE FIL D'ARIANE POUR ANGULAR UN SYSTÈME DE FIL D'ARIANE POUR ANGULAR UN SYSTÈME DE FIL D'ARIANE POUR ANGULARTypeScript: how to compare two datesSimad2018-09-24 | TypeScript: how to compare two dates TypeScript: how to compare two dates* TypeScript: how to compare two dates To compare the values of two dates to understand if the first is greater, less or equal than the second, we can use the Date object that will do what we want.
With Date object we can compare dates using the
The operators require to use .getTime() method.
The following is a my pesonal funtions that I have written on TypeScript to compare two dates.
A common task to do as a frontend developer is to process Date objects, and frequently that means to compare them. Today, I am going to show you the best way to compare dates and some tips that will help you to get the results you expected. This is very important because for example if you want to develop a method that sorts by a Date property, I am pretty sure you will face this issue and you will spend too many hours trying to figure out the actual reason about the error.How to change the date format in the datepicker (bsDatepicker) of Angular htmlSimad2018-09-21 | How to change the date format in the datepicker of Angular html How to change the date format in the datepicker of Angular htmlHow to change the date format in the datepicker of Angular html How to change the date format in the datepicker of Angular html How to change the date format in the datepicker of Angular html How to change the date format in the datepicker of Angular htmlHow to change the date format in the datepicker of Angular htmlHow to change the date format in the datepicker of Angular html How to change the date format in the datepicker of Angular htmldropdown list with ngFor and enum AngularSimad2018-09-19 | The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). The article will show how to use ngFor, ngModel and enum to create a dropdown list (select/options). aVisual Studio Code Extension - Auto ImportSimad2018-09-19 | Auto Import - ES6, TS, JSX, TSX (VSCode Extension) finds, parses and provides code actions and code completion for all available imports. Works with JavaScript (ES6) and TypeScript (TS). Forker from old repo vscode-extension-auto-importAngular CLI Create new projectSimad2018-09-19 | In this video we will dscuss 1. How to create a new angular project from scratch using Angular CLI 2. Run the app 3. Run unit and end-to-end test
In this course we will use Visual Studio Code as the editor. Visual Studio Code is free and you can use it on any platform - Windows, Mac or Linux. If you have not installed it already, please install it by downloading from the following link. https://code.visualstudio.com/download
To create a new Angular Project, open Command Prompt as an Administrator and execute the following command. This command creates all the required files and also installs all the required packages. Depending on your computer and internet connection speed, this command takes a few minutes to complete.
ng new MyFirstApp
ng is the Angular CLI new for creating a new application MyFirstApp is the name of your angular application
There are several options that we can use with "ng new". We will discuss all these options in our next video.
Once the above command has completed successfully you will see the following messages. Installed packages for tooling via npm. Project 'MyFirstApp' successfully created.
So what did this "ng new" command do A new folder with name MyFirstApp is created All the required configuration and source files are created. All the npm dependencies are installed in node_modules folder Unit and end-to-end tests are created The Karma unit test runner is configured The Protractor end-to-end test framework is configured
We will discuss unit tests, end-to-end tests, Karma and Protractor in our upcoming videos.
Please note that all these code and configuration files are created by the Angular CLI out of the box while still following the angular teams best practices and conventions.
Now, go to the folder (MyFirstApp) that contains our angular project, by executing the following command. cd stands for change directory cd MyFirstApp
Now execute the following command at the command prompt to open the project folder in Visual Studio Code. Notice there is a single space and a DOT after the word code. code .
At this point in Visual Studio Code you will see all the Angular project files. Also notice node_modules folder, that conatins all the installed packages.
We will discuss, what all these files are and their purpose in our upcoming videos.
To run the project using Angular CLI, type the following command at the command prompt. This command builds the application and opens it in our default browser. The flag --open, launches our default browser and runs the application. By default the application runs on port 4200. We can change this port number if required. We will discuss how to do that in our upcoming videos. ng serve --open
At the moment, the angular development server is running in watch mode, meaning when a file changes, those changes are automatically detected, compiled and the browser reloads to reflect the changes. This is called live reload. We can turn this live reload functionality off, if required. Again we will discuss how to do this in our upcoming videos.
To stop the server, press CTRL + C while you are on the command prompt and then "Y" and ENTER key. This will stop the server.
To run all the unit tests, use the following command ng test
To run all the end-to-end tests, use the following command ng e2e
We will discuss Unit tests, end-to-end tests and all the options we can use to run them using Angular CLI in our upcoming videos.création dun component - create componentSimad2018-09-19 | Les components seront les briques de vos applications Angular Vous pourrez créer un component qui réprésentera la vue et la logique de l'en-tête d'une page, un autre component pour un menu latéral, un autre pour un composant métier. Un component pourra lui-même être composé d'autres components et être réutilisé à divers endroits de votre application. "Separation Of Concern" (SoC) et "Don't Repeat Yourself" (DRY) seront faciliment mis en oeuvre grâce aux components.Tutorial CSS3 N16 :LES BORDURES EN CSS.Simad2018-08-01 | Définir des bordures en CSS Nous allons pouvoir définir des bordures de couleurs, épaisseurs ou types différents autour de nos éléments HTML en CSS.
L’espace pris par la bordure va se trouver entre la marge intérieure et la marge extérieure d’un élément HTML.
Nous pouvons définir les bordures d’un élément de différentes manières en CSS : soit en utilisant les trois propriétés border-style, border-width et border-color, soit un utilisant directement la notation courte border.
Voyons immédiatement un premier exemple illustrant cela. Comme vous pouvez le voir, il est identique d’utiliser les trois propriétés de type border- ou directement la propriété border avec les trois valeurs requises.
Evidemment, border-width va prendre comme valeur une taille correspondant à l'épaisseur de la bordure en pixels et border-color va prendre une couleur. Notez qu’en utilisant la propriété border on doit préciser dans l’ordre les valeurs associées à border-width, border-style et enfin border-color.
Concernant border-style, cette propriété peut prendre différentes valeurs que nous allons voir immédiatement. Les styles de bordures La propriété border-style peut prendre huit valeurs différentes qui vont définir l’allure générale (le style) de notre bordure.
Vous pouvez voir dans l’image ci-dessous les différentes valeurs possibles ainsi que l’apparence donnée à la bordure.Tutorial CSS3 N15 : LA LARGEUR (WIDTH) ET LA HAUTEUR (HEIGHT) EN CSSSimad2018-08-01 | Types d'éléments HTML et valeurs par défaut Tout élément HTML possède une largeur et une hauteur. La hauteur par défaut d’un élément HTML est déterminée par son contenu. Ainsi, un paragraphe, selon qu’il occupe une ou deux lignes, ne possèdera pas la même hauteur par défaut.
La largeur d’un élément, en revanche, est avant tout déterminée par son type : en effet, les éléments de type block occuperont par défaut tout l’espace disponible. Les éléments de type inline, en revanche, n’occuperont que la largeur nécessaire à leur contenu.
Pour modifier la hauteur par défaut d’un élément, nous allons utiliser la propriété height.
Cette propriété peut prendre des valeurs absolues, relatives (utiles dans le cas d’un site responsive) ou la valeur « auto » (la hauteur sera calculée automatiquement par le navigateur).
Pour modifier la largeur par défaut d’un élément, nous allons cette fois-ci utiliser la propriété width. Cette propriété peut prendre les mêmes valeurs que la propriété height.
Regardez par exemple l’exemple suivant où l’on définit la largeur et la hauteur de notre élément div. On lui donne également une couleur de fond afin de bien voir sa taille. Hauteur, largeur et modèle des boîtes Pour régler efficacement la hauteur et la largeur d’un élément, il faut avant tout bien avoir compris le modèle des boîtes.
En effet, vous devez bien vous rappeler que vous ne définissez que la hauteur et la largeur du contenu de l’élément en soi. Les tailles des marges intérieures, extérieures et des bordures viendront s’ajouter à cette hauteur et à cette largeur afin de former la taille totale de l’élément.
Si vous ne faîtes pas attention, vous risquez de créer des éléments plus grands au final que leurs éléments parents, ce qui est généralement considéré comme une mauvaise pratique en HTML et en CSS.tutorial Fiverr : Exemple Reel de travaille avec un client Américain dans Fiverr partie 2.Simad2018-08-01 | Fiverr est une marketplace pour de petits boulots et services (gigs) qui peuvent être exécutés par le commun des mortels travaillant de chez eux.
Fiverr a connu une forte croissance et offre maintenant plus d’1.9 million de jobs et plus de 4000 nouveaux services dans 120 catégories.
Le concept de Fiverr est simplement de mettre en relation des vendeurs et acheteurs de petits boulots et services. Tous les services basiques de Fiverr coûte 5$ mais il n’est pas inhabituel pour les acheteurs d’acheter des « extra gigs ».
En fait, même si le prix basique d’un gig est de 5$, plus de la moitié des gigs vendus sur Fiverr est pour un montant compris entre 10$ et 100$. Cela est dû au nombre croissant de « Gigs Premium » vendus, où vous pouvez gagner jusqu’à 500$ par gig.
Sur Fiverr, tous les services sont proposés en tant que « gigs » et vous trouverez tout type de gigs créatifs et fous de la part de vendeurs partout dans le monde.
Les gigs vendus sur Fiverr couvrent le design graphique, la promotion de votre entreprise, le réseautage social, la publicité, les vidéos comiques, les services de traduction et d’écriture.
Un esprit créatif sera forcément un avantage. Il est possible que quelqu’un fasse une vidéo avec votre nom écrit avec des coquillages de la plage ou pourquoi pas quelqu’un tenant un panneau avec le nom de votre entreprise pendant qu’il fait du parachute ?
En parcourant les différents gigs proposés, cela devient rapidement clair qu’il y a un grand nombre de choses et de services différents proposés sur Fiverr.
La meilleure chose sur Fiverr ? Tout le monde peut s’inscrire et proposer leur propre petit boulot.tutorial Fiverr : Exemple Reel de travaille avec un client Américain dans Fiverr partie 1 .Simad2018-08-01 | Fiverr est une marketplace pour de petits boulots et services (gigs) qui peuvent être exécutés par le commun des mortels travaillant de chez eux.
Fiverr a connu une forte croissance et offre maintenant plus d’1.9 million de jobs et plus de 4000 nouveaux services dans 120 catégories.
Le concept de Fiverr est simplement de mettre en relation des vendeurs et acheteurs de petits boulots et services. Tous les services basiques de Fiverr coûte 5$ mais il n’est pas inhabituel pour les acheteurs d’acheter des « extra gigs ».
En fait, même si le prix basique d’un gig est de 5$, plus de la moitié des gigs vendus sur Fiverr est pour un montant compris entre 10$ et 100$. Cela est dû au nombre croissant de « Gigs Premium » vendus, où vous pouvez gagner jusqu’à 500$ par gig.
Sur Fiverr, tous les services sont proposés en tant que « gigs » et vous trouverez tout type de gigs créatifs et fous de la part de vendeurs partout dans le monde.
Les gigs vendus sur Fiverr couvrent le design graphique, la promotion de votre entreprise, le réseautage social, la publicité, les vidéos comiques, les services de traduction et d’écriture.
Un esprit créatif sera forcément un avantage. Il est possible que quelqu’un fasse une vidéo avec votre nom écrit avec des coquillages de la plage ou pourquoi pas quelqu’un tenant un panneau avec le nom de votre entreprise pendant qu’il fait du parachute ?
En parcourant les différents gigs proposés, cela devient rapidement clair qu’il y a un grand nombre de choses et de services différents proposés sur Fiverr.
La meilleure chose sur Fiverr ? Tout le monde peut s’inscrire et proposer leur propre petit boulot.tutorial Fiverr : Exemple de travaille dans Fiverr .Simad2018-08-01 | Fiverr est une marketplace pour de petits boulots et services (gigs) qui peuvent être exécutés par le commun des mortels travaillant de chez eux.
Fiverr a connu une forte croissance et offre maintenant plus d’1.9 million de jobs et plus de 4000 nouveaux services dans 120 catégories.
Le concept de Fiverr est simplement de mettre en relation des vendeurs et acheteurs de petits boulots et services. Tous les services basiques de Fiverr coûte 5$ mais il n’est pas inhabituel pour les acheteurs d’acheter des « extra gigs ».
En fait, même si le prix basique d’un gig est de 5$, plus de la moitié des gigs vendus sur Fiverr est pour un montant compris entre 10$ et 100$. Cela est dû au nombre croissant de « Gigs Premium » vendus, où vous pouvez gagner jusqu’à 500$ par gig.
Sur Fiverr, tous les services sont proposés en tant que « gigs » et vous trouverez tout type de gigs créatifs et fous de la part de vendeurs partout dans le monde.
Les gigs vendus sur Fiverr couvrent le design graphique, la promotion de votre entreprise, le réseautage social, la publicité, les vidéos comiques, les services de traduction et d’écriture.
Un esprit créatif sera forcément un avantage. Il est possible que quelqu’un fasse une vidéo avec votre nom écrit avec des coquillages de la plage ou pourquoi pas quelqu’un tenant un panneau avec le nom de votre entreprise pendant qu’il fait du parachute ?
En parcourant les différents gigs proposés, cela devient rapidement clair qu’il y a un grand nombre de choses et de services différents proposés sur Fiverr.
La meilleure chose sur Fiverr ? Tout le monde peut s’inscrire et proposer leur propre petit boulot.Tutoriel JAVA8 N°16: Collectors 3 SummarizingDouble,SummarizingInt,SummarizingLongSimad2018-08-01 | The static method, Collectors.summarizingInt() returns a Collector which applies a mapping function to each input element of type T to convert it to primitive int, and returns summary statistics for the resulting integer values. This tutorial explains how to use the predefined summarizing collectors returned by Collectors.summarizingInt(), Collectors.summarizingLong() and Collectors.summarizingDouble() methods with examples. It first explains the method definitions of these 3 methods, with insights into the structure of the Summary Statistics classes which encapsulate the calculated statistics returned by the collectors. It then shows how to use the summarizing collectors with a Java 8 code example, along with detailed explanation of the code. Definition of summarizing collectors The 3 summarizing collectors have almost identical signatures except for the type of data(int/ long/ double) they handle –Tutoriel JAVA8 N°15: Collectors 2 joining,SummingDouble,SummingInt,SummingLongSimad2018-08-01 | Joining collector can be used for joining Stream String elements.
SummarizingDouble/Long/Int is a collector that returns a special class containing statistical information about numerical data in a Stream of extracted elements. AveragingDouble/Long/Int is a collector that simply returns an average of extracted elements. SummingDouble/Long/Int is a collector that simply returns a sum of extracted elements.Tutoriel JAVA8 N°11: Stream avancé partie 3 Transformation(FlatMap- FlatMapToInt - FlatMapToDouble).Simad2018-07-31 | Java 8 Stream flatMapToInt, flatMapToLong and flatMapToDouble Example By Arvind Rai, June 04, 2016 On this page we will provide Java 8 Stream flatMapToInt, flatMapToLong and flatMapToDouble example. flatMapToInt is used for int data type, flatMapToLong for long data type and flatMapToDouble for double data type. They behave same as flatMap but for primitive data types. flatMapToInt It is used for primitive int data type. It returns IntStream. According to java doc.
"Returns an IntStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element."
Now find the example. FlatMapToIntDemo.java
Java 8 Stream flatMapToInt, flatMapToLong and flatMapToDouble Example By Arvind Rai, June 04, 2016 On this page we will provide Java 8 Stream flatMapToInt, flatMapToLong and flatMapToDouble example. flatMapToInt is used for int data type, flatMapToLong for long data type and flatMapToDouble for double data type. They behave same as flatMap but for primitive data types. flatMapToInt It is used for primitive int data type. It returns IntStream. According to java doc.
"Returns an IntStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element."
flatMapToLong It is used for primitive long data type. It returns LongStream. According to java doc.
"Returns an LongStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element."
Now find the example. FlatMapToLongDemo.java flatMapToDouble It is used for primitive double data type. It returns DoubleStream. According to java doc.
"Returns an DoubleStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element"
Now find the example. package com.concretTutoriel JAVA8 N°14: Collectors 1 averagingInt, averagingLong, averagingDouble .Simad2018-07-31 | Java 8 How to use collectors averagingInt, averagingInt, averagingDouble with examples
This tutorial explains how to use the predefined averaging collectors returned by Collectors.averagingInt(), Collectors.averagingLong() and Collectors.averagingDouble() methods with examples. It first explains the method definitions of these 3 methods and then shows averaging collectors’ usage using Java 8 code example, along with detailed explanation of the code.
Definition of averaging collectors All 3 averaging collectors have very similar signatures which are as follows – Where, – input for all 3 collectors is a Function which extracts an int/long/double type of value as it works on the objects of the stream.The definitions in fact use the predefined ToIntFunction/ ToLongFunction/ ToDoubleFunction which I will explain in the next section. – output is a Collector with finisher(return type) of type Double.
How the averaging collector works Given a stream of objects, averaging collectors provided by the methods Collectors.averagingInt(), Collectors.averagingLong() and Collectors.averagingDouble() reduce these objects to an average of their numerical value/numerical value equivalent.Tutoriel JAVA8 N°13: Stream avancé partie 5 Reduce .Simad2018-07-31 | On this page we will provide java 8 Stream reduce() example. It is used to get the sum of numbers stored in List, Array etc. It can also concatenate the string stored in List and Array etc. Java 8 lambda Stream.reduce() method can perform many more reducing task as required. We are providing here some usability of Stream.reduce(). Find the examples.
Stream.reduce() with Accumulator Here we will pass BinaryOperator as accumulator. In case of numeric BinaryOperator, the start value will be 0. In case of string, the start value will be a blank string.
reduce(BinaryOperator accumulator)
The method will return Optional instance. Find the example. ReduceDemo1.java
Stream.reduce() with Identity and Accumulator Here will use an identity and accumulator. We will pass the identity as start value.
Find the example.
Stream.reduce() with Identity, Accumulator and Combiner Here we will pass three arguments identity, accumulator and combiner in reduce() method. This method with these three arguments is used in parallel processing. Combiner works with parallel stream only, otherwise there is nothing to combine.
Find the example.Tutoriel JAVA8 N°12: Stream avancé partie 4 Filter.Simad2018-07-31 | Filter Filtering a stream of data is the first natural operation that we would need. Stream interface exposes a filter method that takes in a Predicate (http://javadocs.techempower.com/jdk18/api/java/util/function/Predicate.html ) SAM that allows us to use lambda expression to define the filtering criteria:
Now the thing is that often you want to filter a List just like in the example above. Then you can easily convert the list to a stream, filter and collect the results back to a list if necessary.Tutoriel JAVA8 N°10: Stream avancé partie 2 Transformation(MapToDdouble - MapToInt)Simad2018-07-31 | On this page we will provide java 8 Stream map() example. It returns a Stream instance processed by a given Function. map() returns the stream of objects and to get the stream of primitive data type such as IntStream, LongStream and DoubleStream, java 8 Stream provides the method as mapToInt(), mapToLong() and mapToDouble() respectively Stream map() with Function The syntax of Stream.map() method is as follows.
map(Function mapper)
We need to pass Function instance as lambda expression. This method returns Stream instance that has the result processed by given Function. This is an intermediate operation. Convert Map to List using Stream map() Here we will convert a HashMap into a List of objects using Stream.map() as an intermediate operation. Convert List to another List using Stream map() In this example we will convert a List of an object into another List of different object using Stream.map() as an intermediate operation. ListToAnotherList.javaTutorial CSS3 N14 :LE MODELE DES BOITES EN CSS .Simad2018-07-27 | Importance et définition Le modèle des boîtes est un concept essentiel et central pour la mise en page d’une page web.
Vous devez absolument comprendre le modèle des boîtes pour ensuite pouvoir positionner les différents éléments de votre page où vous le souhaitez et créer de belles pages web.
Le modèle des boîtes nous dit que « tout élément HTML peut être considéré comme une boîte rectangulaire », qu’il soit de type block ou inline.
Autour de la « boîte » contenant l’élément en soi, on va pouvoir dessiner d'autres boîtes contenant la marge intérieure (padding), les bordures et finalement la marge extérieure de l'élément.
Grâce au modèle des boîtes, nous allons comprendre comment définir des marges intérieures et extérieures et des bordures autour du contenu de l’élément. Nous allons également pouvoir positionner les éléments les uns par rapport aux autres de manière efficace.Tutorial CSS3 N13: Les propriétés de type font(font-style-font-size-font-weight)Simad2018-07-27 | Les propriétés de type font Les propriétés CSS de type font- vont nous permettre de modifier l’apparence de notre police d’écriture, et donc de nos textes.
Nous allons par exemple pouvoir transformer la taille, le poids ou le style de notre police d’écriture.
Dans cette partie, nous allons voir les propriétés de type font- les plus utilisées :
font-size pour modifier la taille de nos textes ; font-style pour modifier le style de nos textes ; font-weight pour modifier le poids de nos textes.Tutorial CSS3 N12: Les propriétés de type font .Simad2018-07-27 | Les propriétés CSS de type font- vont nous permettre de modifier l’apparence de notre police d’écriture, et donc de nos textes.
Nous allons par exemple pouvoir transformer la taille, le poids ou le style de notre police d’écriture.
Dans cette partie, nous allons voir les propriétés de type font- les plus utilisées :
font-size pour modifier la taille de nos textes ; font-style pour modifier le style de nos textes ; font-weight pour modifier le poids de nos textes.Tutorial CSS3 N11 : LES PROPRIETES CSS DE TYPE TEXT partie 2 (text-shadow-text-indent).Simad2018-07-27 | La propriété CSS text-indent La propriété CSS text-indent va nous permettre de gérer l’indentation d’un texte. Pour rappel, indenter un texte, c’est le décaler vers la droite.
La propriété text-indent accepte aussi bien des valeurs absolues (en px par exemple) que des valeurs relatives (en % ou em par exemple). On peut également lui attribuer des valeurs négatives afin de décaler un texte vers la gauche. La propriété CSS text-shadow La propriété CSS text-shadow va nous permettre de créer des ombres autour de nos textes, afin que ceux-ci se détachent de l’arrière plan.
On va devoir indiquer quatre valeurs dans un ordre précis à la propriété text-shadow afin que celle-ci fonctionne correctement :
La projection horizontale de l’ombre (en px) ; La projection verticale de l’ombre (en px) ; Le rayon de propagation de l’ombre (le « radius », en px) ; La couleur de l’ombre. Accepte les mêmes valeurs que la propriété color. Si l’on indique des valeurs positives pour les projections horizontales et verticales de l’ombre, l'ombre sera projetée en bas à droite du texte. En indiquant des valeurs négatives, on peut modifier l’orientation de notre ombre.Tutoriel JAVA8 N°9: Stream avancé partie 1 La rechercheSimad2018-07-27 | Jusqu’à présent, effectuer des traitements sur des Collections ou des tableaux (de type MapReduce) en Java passait essentiellement par l’utilisation du pattern Iterator. Java 8 nous propose l’API Stream pour simplifier ces traitements en introduisant un nouvel objet, Stream.
Un stream se construit à partir d’une source de données (une collection, un tableau ou des sources I/O par exemple), et possède un certain nombre de propriétés spécifiques :
Un stream ne stocke pas de données, contrairement à une collection. Il se contente de les transférer d’une source vers une suite d’opérations. Un stream ne modifie pas les données de la source sur laquelle il est construit. S’il doit modifier des données pour les réutiliser, il va construire un nouveau stream à partir du stream initial. Ce point est très important pour garder une cohérence lors de la parallélisation du traitement. Le chargement des données pour des opérations sur un stream s’effectue de façon lazy. Cela permet d’optimiser les performances de nos applications. Par exemple, si l’on recherche dans un stream de chaînes de caractères une chaîne correspondant à un certain pattern, cela nous permettra de ne charger que les éléments nécessaires pour trouver une chaîne qui conviendrait, et le reste des données n’aura alors pas à être chargé. Un stream peut ne pas être borné, contrairement aux collections. Il faudra cependant veiller à ce que nos opérations se terminent en un temps fini – par exemple avec des méthodes comme limit(n) ou findFirst( ). Enfin, un stream n’est pas réutilisable. Une fois qu’il a été parcouru, si l’on veut réutiliser les données de la source sur laquelle il avait été construit, nous serons obligés de reconstruire un nouveau stream sur cette même source. Il existe deux types d’opérations que l’on peut effectuer sur un stream : les opérations intermédiaires et les opérations terminales.
Les opérations intermédiaires (Stream.map ou Stream.filter par exemple) sont effectuées de façon lazy et renvoient un nouveau stream, ce qui crée une succession de streams que l’on appelle stream pipelines. Tant qu’aucune opération terminale n’aura été appelée sur un stream pipelines, les opérations intermédiaires ne seront pas réellement effectuées.
Quand une opération terminale sera appelée (Stream.reduce ou Stream.collect par exemple), on va alors traverser tous les streams créés par les opérations intermédiaires, appliquer les différentes opérations aux données puis ajouter l’opération terminale. Dès lors, tous les streams seront dit consommés, ils seront détruits et ne pourront plus être utilisés.Tutoriel JAVA8 N°8: Type Inference Java 8Simad2018-07-27 | L'inférence de type est la capacité d'un compilateur Java à examiner chaque invocation de méthode et la déclaration correspondante pour déterminer l'argument de type (ou les arguments) qui rendent l'invocation applicable. L'algorithme d'inférence détermine les types d'arguments et, le cas échéant, le type auquel le résultat est affecté ou renvoyé. Enfin, l'algorithme d'inférence essaie de trouver le type le plus spécifique qui fonctionne avec tous les arguments.Tutoriel JAVA8 N°7: Date Time Java 8Simad2018-07-27 | Java 8 a introduit de nouvelles API pour la date et l' heure afin de corriger les insuffisances des anciens java.util.Date et java.util.Calendar .
Dans le cadre de cet article, commençons par les problèmes des API Date et Calendar existantes et discutons de la façon dont les nouvelles API Java 8 Date et Heure les adressent.
Nous examinerons aussi quelques - unes des classes de base du nouveau projet Java 8 qui font partie du java.time paquet comme LocalDate , LocalTime, LocalDateTime, ZonedDateTime, période, durée et leurs API prises en charge. Le LocalDate représente une date au format ISO (aaaa-mm-jj) sans temps .
Il peut être utilisé pour stocker des dates comme les anniversaires et les jours de paie.
Une instance de la date actuelle peut être créée à partir de l'horloge système comme ci-dessous:
1 LocalDate localDate = LocalDate.now(); La LocalDate représentant un jour, un mois et une année spécifiques peut être obtenue en utilisant la méthode " of " ou en utilisant la méthode " parse ". Par exemple, les extraits de code ci-dessous représentent la LocalDate du 20 février 2015:Design view is not getting displayed in my Android Studio????Simad2018-07-25 | Design view is not getting displayed in my Android Studio? What should I do? I'm new to android development and I have this problem with my Android Studio 3.1.3 demo project or any project that I create. Even though that I can drag and drop different controls on my design view (ConstraintLayout) but nothing shows on the design view, it shows for a split sec and then it disappears.
I can see all the elements which I drag and drop in activity_main.xml Text tab, Component Tree and even in run mode, but not in design tab, nothing shows in design view and it is always blank not even hello world shows on it.
I tried Invalidate Cache Restart, Restarting my PC, changing Zoom - In and out, Inferring constraints, but no luck. Controls
I can't do much unless I see things in design view.
Empty Design View:select one checkbox at a time angular 4 and 5Simad2018-07-25 | select one checkbox at a time angular 4 and 5. select one checkbox at a time angular 4 and 5. select one checkbox at a time angular 4 and 5. select one checkbox at a time angular 4 and 5. select one checkbox at a time angular 4 and 5. select one checkbox at a time angular 4 and 5.display data from database to dropdown angular5 and REST Api JEE springSimad2018-07-25 | display data from database to dropdown angular5 and REST Api JEE spring . display data from database to dropdown angular5 and REST Api JEE spring . display data from database to dropdown angular5 and REST Api JEE spring .