#283: Part 2: Measuring Complex Impedance with MFJ-259B | Crossing the real axis... @w2aew
#283: Part 2: Measuring Complex Impedance with MFJ-259B | Crossing the real axis...  @w2aew
Uploaded May 2018 | Updated November 2026, 4 days ago
Part 1 can be found here:
youtube.com/watch?v=_Dlw_XheKl0
In this Part 2 video - we take a look at how to apply the Smith Chart technique to determine the sign of the reactive component (X) when the curve crosses the real axis - in other words, when the X value changes sign in your measurement set.
Notes from Part 1:
qsl.net/w2aew/youtube/Measure_Complex_Impedance_MJF-259B.pdf
Notes from Part 2:
qsl.net/w2aew/youtube/Sign_of_X_part2.pdf
#283: Part 2: Measuring Complex Impedance with MFJ-259B | Crossing the real axis...#379: How to measure coax loss using a NanoVNA#267: Quick Tip: Making IC & Transistor part numbers easy to read#328: Circuit Fun: Op Amp Signal Conditioning - a Practical Example#373: Portable ham radio / POTA: The Spiderbeam 40 (12m) telescoping mast and hitch mounted support#367: Characterizing the key-up frequency transient on an Alinco DR-135 Mk III 2m radio with an RSA#417: What is the Transition Frequency (fT) of a transistor - and how to test it.#308: Back to Basics: Diodes - guide to operation, characteristics, types and specifications#280: Review of RigExpert AA-55 ZOOM Antenna and Cable Analyzer#357: Ham Radio fun: ARRL Field Day 22 - Antenna raising, rig setup and a bit of operating#301: How to install and adjust the SO-3 TCXO in the Kenwood TS-590#262: IQ Modulator Basics: Operation, measurements, impairments
w2aew |

#283: Part 2: Measuring Complex Impedance with MFJ-259B | Crossing the real axis...

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER