jamesb72
Two DJI Phantom 3s, Aerial Ballet with Dan Holt
updated
I made this quick video to explain why I don't feel the Noctilight fits the headtorches Petzl claim on website, to be honest it only really fits the Zikkina and Actik properly IMHO, and its very overpriced I feel - would be fine for a fiver, but Amazon has this for £16 today which is way too much.
Hope this is useful
Plus points:
1. Goes 15mph on level ground with adult, or up hills with kids - performance is good for adults, excellent for kids.
2. Easy to ride with nice throttle and regen braking controls on handlebar
3. Battery lasts over an hour of kids riding round and round, takes 3hrs to charge
4. Standard mode 11mph limited speed, sport mode 15mph (+/- button to switch)
Negatives:
1. Only legal to use on private land currently
2. Really not suitable for kids unsupervised and without proper safety gear on
For the price, this is really good value and great fun, battery warranty is 6 months, scooter warranty is 2 years in manual (Lidl brochure I'm sure said 3 years ?)
Thanks to Arvacon, there are some extra features, cruise control and throttle from zero (you normally have to push start before throttle is active) . Details in this video: youtu.be/xw-A6duv_e8
Lidl E-Scooter ESA 800 Doc Green Electric Scooter
Specs from user manual
250w rear wheel motor
36V 4.8Ah Lithium Ion battery with Sanyo cells
Charging time 3 hours
Range Max 8miles
Max load 100Kg
Max speed 15mph (Sport mode)
Weight 10.8Kg
Hope this is useful.
Rapids are great fun at Centerparcs, still my favourite part of the pool area.
February 2020.
Music Stardrive from Youtube archive.
The new plastic twenty pound UK notes are made of tallow polymer, so I wanted to see how this is affected by vinegar and microwave, as you can see this is not a good idea, so please don't try this !!
You do have to press quite hard when tilting torch up to click out of the groove, so I would suggest not doing this when torch is cold as plastic might be more brittle, I did this in normal indoor temperature and it was fine.
Both torches have the excellent reactive lighting feature, the Reactik+ with bluetooth and multiple buttons was overly complex, so the back to basics Swift RL is brighter and simpler.
I do feel Swift RL is overpriced in comparison with the Reactik+ which understandably required bluetooth and smartphone Apps development, so to strip off most of the features but charge same or more price seems steep to me!
Hope this is useful info as always.
The new 300 lumen 2019 Zipka is noticably brighter with a nicer beam spread and 'warmer/yellow' light colour, so definitely better.
Video shows the differences, and an idea of the beam difference, as best I can show on camera.
The Lidl Crivit headtorch is fantastic for the money, but not quite as good as the Reactik+ thankfully for me ;)
Lidl specs 200 lumen brightness, range 60M, lighting time approx 2.5-3 hours (at 100%) 1800mah USB rechargable battery, IP44 splashproof RRP £9.99 - (also has a emergency whistle in the headstrap buckle)
Petzl specs 300 lumen brightness, range 110M lighting time 2.5 hrs (at 300lm) 1800mah USB rechargable battery IPX4 splashproof - RRP £99 (has twin LEDs one wide, one narrow)
Hope this is useful.
Original video June 2019
This Parkside Cordless Lawnmower from Lidl looked a bargain for £149 so Harry has tried it out.
Plus points:
1. powerful enough for a normal garden and can handle longer grass without slowing down.
2. Very light and easy to push
3. Comes with two batteries and dual charger - should be enough for normal gardens
Negatives:
1. Grass box is fiddly to clip round wire frame
2. the plastic flap on grass box doesn't sit neatly, so grass collects under it - I suspect it would work better with this flap just cut off
3. Adjusting handle height/angle is fiddly as the side clips don't neatly spring open
Overall for the price this works well, we have a petrol mower and this is much lighter/easier to start and push around, so I think it will be our normal mower, and seems to handle longer grass without slowing/bogging down which was my concern.
Not sure on run time, it did our small back and front gardens easily in about 20 minutes and battery still showing two bars, I suspect it would run 40mins at least.
Its nice that you can use these batteries with the other Lidl/Parkside X20 tools - I bought the cordless drill/driver for £20 which can share the batteries - hope they get the strimmer back in stock as would be nice to have the set.
There are some very expensive motorhome damp meters around, but I found this cheap meter with long probes for under £25 which is easy to cut the probes down to make a really handy damp meter for motorhome or caravan.
I bought this on ebay from hong kong which came in just over a week, but they are similar prices on amazon, and if you want UK postage for a few pounds more there are ebay UK sellers.
Hope this is useful info, when checking your van check round windows/apertures, and along the edges/seams of walls and ceiling, normal readings vary depending on weather etc so anything under around 15% is probably fine, you are looking for any area's which have higher readings than the average, and those will need looking at.
We ended up going to another dealer to get our initial damp sorted which they located in about 30 seconds, and fixed in a few days, and have had a couple more area's resealed since, both were completed in a couple of days with exterior resealing only and the inside dries out over the next few months, so if you keep on top of readings, then its nothing to worry much about.
Hope this is useful info.
Having tried it the bluetooth is a gimmick, and way too complicated and the app is unusable on Android, and not great on Apple but being able to customise profiles is nice, and Reactik+ is brighter at 300lumens compared with the non-Bluetooth Reactik at 220 lumens and only about £12 cheaper, so I went for the top model, just so I didn't end up buying both ;)
If I could only have one headtorch though, it would still be a Zipka+Core for compactness/value, but if I could have 3 I'd definitely have a Reactik or Reactik+ as one of them ;) (Sadly I have 12 working headtorches I can find, probably a couple more hidden somewhere, so this is not a realistic scenario for me ;)
Thanks for watching, and please comment below how many headtorches you have, and what your favourite is!
Having compared the new Zipka with Tinmiu, the Zipka is slightly brighter, but after an hour the Tinmiu retained 81% of its brightness (compared with Zipka 30% on AAA, or 50% on the £23 Core rechargable battery), that along with the smart sensor makes the Tinmiu a great budget option for £12.99 its too good to miss.
I bought the Tinmiu on ebay, but suggest you search "Tinmiu smart sensor" and find best price in your country on the day you plan to buy, as I don't have any links to any particular sellers or sites.
Thanks for watching.
Having compared these, the Core is slightly brighter than fresh AAA's, but after an hour retains 50% brightness, compared with 30% for AAA's, and you can plug in and recharge easily, rather than either starting with used AAA or changing them before they have run out.
For me I think this makes the Core a good upgrade, however for only about £10 more than Zipka+Core you can get the Reactik rechargable which is brighter, and has the light sensitive mode so that complicates things a bit more ;)
Please feel free to use any of the video if useful for promo video etc for future years.
Thanks
James.
I bought the Viltrox EF-EOS M2 Speedbooster (with my own money as always, I never accept free stuff to review) so I can use my Canon M5 as a 'full frame lite' with EF lenses. First impressions are good, other than I noticed the nifty fifty Canon 50mm 1.8 STM lens no longer autoparks focus when camera is switched off !
I emailed Viltrox last night to ask about this, and they replied immediately with 1.4 firmware which fixes this, so wanted to quickly show how easy it is to update firmware and this fixes the focus autopark issue with Canon 50mm lens.
I did ask about the battery drain issue when camera is off, and they think firmware may help with that also. My M5 body doesn't drain battery with any of my lenses (EF28/50/85/24-105F4L) so this doesn't effect me thankfully.
Please comment below with any questions or feedback, I will do my best to answer as always.
Thanks for watching my video.
Auto Focus Lens Mount Adapter Ring 0.71X Focal Lenth Multiplier USB Upgrade for Canon EF Series Lens to EOS EF-M Mirrorless Camera for Canon EOS M5 M6 M50 M1 M2 M3
Sony MDR-AS210 (aka MDR-AS200 internationally) seem to be Sony's replacement model but as they come are very awkward to fit and I found extremely uncomfortable as they dig in behind my ears, but are easily fixed by cutting the bottom half of the rubber loop - they still stay on when walking, but probably not suitable for sports/jogging. For smaller ears the overear loop this may not be an issue, but for me they are unbearably uncomfortable without this mod. The sound is noticably louder than the others, which is an advantage with small mp3/ipods which don't provide a lot of volume, and the balance of sound is good (not too bassy or tinny).
Skullcandy Chops Flex earphones are soft rubber and have a Microphone for mobile phone use so are also very comfortable, but sound is a bit tinny, but are more secure so for jogging/sports would be better than the modified AS210s.
Philips SHS3201 are hard plastic hook over style, so quick to put on, but I found less comfortable over time, especially under a hat, the sound is quite basey/boomy also which I'm not a fan of, but again for sports they are secure and if you don't wear a hat over them comfort is OK.
Prices were from ebay Nov2018, so I always suggest searching for best price in your country at the time as prices change wildly.
Hope this is useful, as always please comment with any questions and I will do my best to reply.
A big thanks to Jim for help/advice and inspiration see his video youtube.com/watch?v=U_g7o6iJVyo
You can find these items cheap on ebay/amazon etc, but links are just the ones I used, so always check for best price in your country:
1.5-2.5M single line parafoil kite will easily lift camera righ in 5-7mph wind or higher - mine was 1.5M from ebay for £14.99 if you search ebay "single line (foil, parafoil) kite" there are several types, just check the dimensions as you need 1.5M square or larger. I'm using is 175CM x 85CM 'galaxy' kite which is still on ebay. I tried to convert a 2 line kite to single line but it was not successful so you need to choose a single line kite.
Fuzzy tail I'm using a CIM Fuzzy tail for £9.99 kiteworld.co.uk/cgi-bin/sh000004.pl?WD=fuzzy&PN=CIM_Fuzzy_Tail%2ehtml#SID=159
which has clip/loop on each end, but a cheap ebay search "kite tail rainbow 10" is under £2 and with slits cut in and extra hook sewn on other end works fine.
The CIM 18cm round reel for £2.99 works well kiteworld.co.uk/acatalog/CIM-Ring-Spool-180cm.html#SID=171
Line I'd recommend braided (not twisted) line, I'm using 500ft of 200lb braided line from Emma's Kits on ebay, but 120Lb line should be plenty strong enough - search ebay '500ft kite line' seller I used is emmaxiao - be aware there is a 60M/200ft altitude limit for kites in the UK set by the CAA but obviously kites don't fly straight up, so more than 200ft of line is OK.
Camera mount, I much prefer picavet style mount to the selfie stick pendulum, as its easier to clip on/off line and more stable, the 3D printed plans are:
thingiverse.com/thing:2367626
I used 22m curtain screw eyes from wilco, and a gopro tripod mount with a 1" 1/4 BNC bolt to mount this.
Instructions on how to string the line on picavet mount:
http://www.brooxes.com/newsite/Downloads/Picavet.pdf
Clips search ebay 'longline fishing clips' 6cm size 10 for £2.62 delivered, just bend the tips out slightly with pliers to grip the line firmly.
Any gopro extension arm will work, the helmet type are cheapest (search ebay "gopro extension arm helmet").
The electronic rotating base was £16 from ebay search "puluz 360 head remote", it comes with the gopro mount for camera side, to attach this to gopro mount on Picavet/selfie stick you just need a tripod screw to gopro adapter ebay search "gopro screw mount adapter" - I got 2 for 99p and they are useful to have for lots of things.
I use Gopro Hero7 camera which has nice stabilisation for video but any wifi action camera will work fine (loads on amazon etc from £40 upwards), or a non-wifi camera you can just set to take photo every 2 or 5 seconds, or start video and let kite go up and see what you get. The nice thing about the Gopro Hero5/6/7 is they have linear mode which takes out the fisheye effect which makes it much easier to crop/straighten photos without any odd bending due to fisheye lens.
I strongly recommend you have a helper (or 2 for first attempts), once you have tried this with help then tethering the kite to a bench or railing should be possible on your own, but its easier (and more fun) with someone else.
Making a tether/handle out of paracord (again cheap on ebay search "paracord 550" its 99p for 25ft available in many colours and really useful to have)
Other options/things I tried are:
Selfie stick with tripod thread in bottom, I used Puluz PU55 £3.72 posted from banggood:
banggood.com/PULUZ-PU55-Extendable-Handheld-Selfie-Stick-Monopod-for-Action-Sport-Camera-p-1198861.html?p=MW2604548780201404KC
1/4 Inch D-ring for camera
banggood.com/14-Inch-Long-Quick-Release-Plate-Stainless-Steel-D-Ring-Screw-For-Tripod-Camera-p-986255.html?p=MW2604548780201404KC
A rubber tap washer as safety ring, you could use a piece of plastic or cardboard just as a ridge to stop string sliding out.
Loop knot to tie selfie stick to kite string: youtube.com/watch?v=iirCwYONnIY
This is also an option where you might need a PFCO or awkward permission for a quadcopter flight, kites generally are flyable in many more places, the only restrictions are 60M/200ft altitude limit, but this is the kite height not line length (as kite won't fly straight up), so just something to be aware of.
Hope this is useful info, any questions please ask below.
I do like the hyperlapse effect and it works really well straight from camera, when I've done hyperlapse before its been a lot of processing time and results were no better than this !
WG2 is on latest firmware (I checked today with app)
Hero7 1080/30 L with hypersmooth on
The hill stands at a strategic location overlooking the point where the River Tone and the old course of the River Cary join the River Parrett. Although there is some evidence of Roman visitation, the first fortification of the site was the construction of a Norman motte. It has been called King Alfred's Fort, however there is no proof of use by Alfred the Great. A medieval church was built on the hill in the 15th century. The current ruined church on top of the hill was built in 1793.
This was all shot on Hero7 Black with internal microphone.
Thanks Evie for washing car, I did let her keep the money I promise ;)
Hero7 Black Timewarp settings 1080 in 10x (Timewarp is wide only), video is as it came out of camera (no editing tweaks other than slight cropping), the timewarp hyperlapse works really well.
H.264 also fine, edited on old Windows 7 PC with Vegas Movie Studio 14 Platinum, music is Gemini Robot from youtube archive.
It wasn't clear from facebook or Amazon listings, but downloading the manual I could see this comes with a single axis brushless gimbal (a Wewow Sport X1 rebranded Flexifoil), so I figured that would give smooth video from a kite which sounded like fun.
I couldn't find any reviews on youtube, and my original plan was to use this for aerial video and stills where its not safe, legal or practical to fly a camera quadcopter drone, such as national trust monuments etc, but having tried this I realised this is aimed at kite enthusiasts who on the right day can get some aerial photos around the flying area, not to take photos of a specific feature or object which is what I was hoping for.
Hope this doesn't come across as overly negative, this is a real quality package, the kite, reel etc are all really nicely made, my issues with it are that you can't point the camera where you choose, only two fixed positions either side of the lines which will always point downwind, and that its unusable for video - which I mistakenly assumed as it had a stabilising brushless gimbal it would be useful for.
Thanks to Harry for camera work and Richard for kite assistance/expertise.
Hope this is useful, any questions please comment below as always, and I will try to answer.
This was my first proper video flight with Mavic Air, so there is a fair bit of jerky tilt and movement, but some nice shots. I wanted to fly out to lighthouse to take stills of the far side which has a stunning cliff face, so took some video on way out and back to make this.
I wasn't happy with the first edit, video straight from Mavic Air was quite dark and grey, so I've been playing with colour grading in Vegas Home Studio 14 platinum.
Using 'Brightness and Contrast' with 'Color Corrector' and 'Color Curves' Video Fx (3 in series), initially increasing contrast in brightness and contrast tool, then increasing top/decreasing bottom in color curves, then playing with color corrector mid first staying close to centre but towards green side, and lows a bit less in same direction, highs a bit more in same direction.
I started trying to make the grass greener, but this then made the sea a bit too green, so I've juggled a bit less green/more blue between shots. I could go back and forth for hours, so stopped when I figured I wasn't improving it much more.
Anyway, hope this is interesting comparison, there is a half and half version showing the before/after (on my 1st draft so this final is slightly tweaked).
I will make the original unlisted in a day or two so this isn't duplicated so links:
Original ungraded version: youtube.com/watch?v=fte8ZwGN1FA
Splitscreen grading comparison: youtube.com/watch?v=Y7MUmnkgNU4
Godrevy Lighthouse was built in 1858–1859 on Godrevy Island in St Ives Bay, Cornwall. Standing approximately 300 metres (980 ft) off Godrevy Head, it marks the Stones reef, which has been a hazard to shipping for centuries.
This was my first proper video flight with Mavic Air, so there is a fair bit of jerky tilt and movement, but some nice shots. I wanted to fly out to lighthouse to take stills of the far side which has a stunning cliff face, so took some video on way out and back to make this.
PGYTech are definitely the best, and I've been using them happily, they are much better quality with rubber tips, so worth the money.
The rubber legs are unusable, so don't waste money on them.
The hard plastic AR/BR type, the fronts are far too hard to remove, but the rears are pretty good, but buying both sets seems pointless, so I would probably stick with PGY Tech.
I always suggest you search for best price in your country when you're looking, but people always ask for links so here is one:
banggood.com/PGYTECH-Extended-Landing-Gear-Legs-Heighten-Landing-Feet-Bracket-For-DJI-Mavic-Air-RC-Quadcopter-p-1275088.html?p=MW2604548780201404KC
Thanks for watching.
You can search ebay for "DJI MAVIC B6 CHARGING CABLE' there is also a Spark version if you search "DJI SPARK B6 CHARGING CABLE" - for Spark I would try 4Amps initially and check battery comes off cool before increasing, I'd aim for discharge time to match flight time, as discharge is only half capacity this will ensure no issues.
Mavic 2 batteries can do the exact same thing, set the discharger to 4S and use the Mavic 2 connector (search ebay Mavic 2 B6 charging cable)
DJI Spark is 3S lipo you would just need to get the Spark version of charging cable if you search ebay for 'DJI SPARK B6 CHARGING CABLE' you can find them there.
Phantom 4 and pro use 4S lipo so ebay search "B6 charger Phantom 4" will find the adapter cable.
Inspire batteries are larger 6S so the same approach will work, but ideally you need a higher power discharger, there is a SkyRC 200W discharger BD200 around £75 which looks suitable, battery connector I think is same as Phantom 3 so a Phantom 3 cable should work.
I advise people to search for cheapest price for a discharger in your country/at the time, and don't recommend any specific supplier, but people always ask for a link, so I bought my ISDT discharger from Banggood and have been really happy with it:
ISDT FD-100 Smart Discharger
banggood.com/ISDT-FD-100-80W-6A-Smart-Control-Discharger-for-2S-8S-Lipo-Battery-p-1145999.html?p=MW2604548780201404KC
If you want more info on this ISDT100 discharger, I reviewed it in a previous video here:
youtube.com/watch?v=l3Jar3fdBOw
As usual, I bought and paid for this with my own money, so this is just my personal opinion for my specific use. Hope this is useful, please comment with any questions, like, share and subscribe.
Looking around for a case, I couldn't really see any which ticked all the boxes for me, so to compare I ordered 3 plus I had the original DJI Fly More case (which is just weird).
The RLSOCO case I paid £32.99 I feel is the best all round, it has moulded foam liner which fits everything snugly, a square general purpose section which can take chargers OR prop guards or both, and best feature is the foam flap with lots of storage pockets in back, perfect for spare props, cables, USB adaptor, documents etc etc.
The cheap ebay case is also good, its by far the cheapest, and could easily be tweaked with some extra foam and trimming to work really well, and its a good bit smaller for just what you need to fly.
The Smatree case is just not a good enough fit and was the most expensive here.
DJI bag baffles me, as the flaps/pockets look very well designed, but it just doesn't work as a carry case with the weird side/kangaroo pouch, and the mavic isn't well protected, if only it was a fraction bigger and the mavic would fit inside its hard pouch it comes in it would be really useful !
Hope this is useful info.
I like the quality, decent battery size, and GameSir T1D controller, the VPS position hold works really well inside or outside in light wind.
I don't like the price (especially UK price £99 just for Tello, it should at least come with the USB charger thrown in), and no onboard storage, so video/stills are recorded on your smartphone - which makes smooth video impossible.
If the price was better OR if it had onboard storage for video it would be near perfect !
Still I do think worth getting if your planning a DJI Mavic/Phantom as your first quadcopter, this would be a good first step to practice inside, learn the controls and get a feel for the kind of aerial video or stills you're interested in and whether you want to invest in something bigger.
It also weighs 89g ready to fly, so is well under the 250g threshold which requires any kind of registration or licencing, so i can see that is also a plus point.
There was an issue with Android app not recording video/stills, this is due to permissions prompt disapearing too quicly as the app starts, so the fix is to go into settings-Application Manager-Tello and under App Permissions check all 4 are enabled !
Hope this is useful, as always thanks for watching and please comment with any questions and I will do my best to answer.
This is my own review of items I bought and paid for with my own money as a normal customer, I don't accept free stuff to review, as would rather be completely honest and only review things I'm genuinely interested in !
Hope this is useful.
I know everyone is filming combines and hay bailers at the moment, but I think they look great from above, so nice to get some footage.
Hand catch at the end works really well with landing protection turned off.
I will do a Mavic Air case comparison in next couple of weeks, I got a few different cases to compare, so will pick my favourite.
I do plan to do a video on Tello so anything you want to know please comment below and I will include this.
Griffon 12000TD Hovercraft reg GH2161 Island Flyer
Journey takes about 10 minutes on the hovercraft which is a really fun experience.
The original Canon EF to EF-M adaptors are incredibly expensive, so I wanted to look at the cheap generic versions to compare, I bought these on ebay, Meike MK-C-AF4, Kooka KK-EM01A, and after I had refund for the Kooka version, I saw Andoer Auto Mount Adapter EF-EOSM cheap from a UK seller, so bought that to add to original comparison, hence this update video.
I've also seen these on amazon and am sure you can find them in other sellers across the world
The cheaper adaptors have a little play between lens and adapter (not body and adapter which were both really solid), the Kooka has so much play the AF contacts are intermittent, but the Meike and Andoer worked fine with several lens both EF and EF-S I tested.
Andoer is an exact copy of the Canon version, metal bodied and has registration marks for EF/EF-S on face and side, and EF-M mark on end so I prefer it, however the Meike adaptor works perfectly, and for a smaller EosM body which you use a tripod often, the moulded tripod mount is less obtrusive on the Meike adapter, than the Andoer removable tripod mounting block.
Original video is here youtube.com/watch?v=ZY372bbdlxo
Hope this is useful.
This was test video at the time.
First test with Garmin Virb 360 light was fading but wanted to grab a few test shots as camera arrived today. This is 2nd attempt to edit, as I discovered you cannot copy video files to PC and then edit, you have to import into Virb edit from card to pickup Gmetrix files which are needed for stabilisation as well as data overlays.
Handheld on a selfie stick
Gokart was clipped onto frame with a plastic extension which wobbled a lot
Bike shot was on a gopro headstrap with a straight extension to raise camera up above head level so rear view not obscured too much
Edited in virb edit software.
Stabilisation applied in Virb edit software but doesn't look to have worked too well on shakey bits maybe due to low light?
Stabilsation modes are follow for the moving clips, stabilised only for handheld, and no stabilisation for tripod (it made the video wobble?).
I don't feel the hassle of 360 is worth it as quality is so grainy/fuzzy, as you are stretching 4k video round the full 360deg it views more like 360p which is well below what we are used to, so its a not from me I'm afraid and i've returned camera for refund.
I'm still really not sure 360 video has much future, other than for overcapture style use, where you film 360 but then select your preferred view/angles when editing to render out as a standard 1080 video, for now the quality to do this just wasn't quite there.
As usual, I bought and paid for this with my own money, so this is just my personal opinion for my specific use.
I advise people to search for cheapest price in your country/at the time, and don't recommend any specific supplier, but people always ask for a link, so I bought mine from Banggood:
ISDT FD-100 Smart Discharger
banggood.com/ISDT-FD-100-80W-6A-Smart-Control-Discharger-for-2S-8S-Lipo-Battery-p-1145999.html?p=MW2604548780201404KC
Lipo checker I use is this type:
banggood.com/CellMeter-7-Battery-Capacity-Checker-LiPo-LiFe-Li-ion-NiMH-NiCd-p-85223.html?p=MW2604548780201404KC
If you wanted to monitor individual cells during discharge, these lipo checkers have an adjustable trigger voltage and will beep loudly when lowest cell drops below that - you can put a piece of sticky tape over the horns to reduce volume for indoor use:
banggood.com/2-x-2-in-1-Lipo-Battery-Low-Voltage-Tester-1S-8S-Buzzer-Alarm-p-973987.html?p=MW2604548780201404KC
Hope this is useful, please comment with any questions, like, share and subscribe.
Thanks.
I don't recommend specific sellers, as I suggest you search for best price in your country, but people always ask for links, I got the WG2 from Banggood, and my Osmo came from ebay used, as my preferred DJI dealer were out of stock, and it saved £100 on new price and was in perfect condition.
WG2 waterproof Gimbal:
banggood.com/Feiyu-WG2-Waterproof-360-Degree-3-Axis-Gimbal-Camera-Stabilizer-FPV-For-GoPro-433-YI-4K-SJCAM-AEE-p-1162473.html?p=MW2604548780201404KC
WG2 Smart remote control
banggood.com/Feiyu-Tech-Smart-Remote-Control-for-Camera-Gimbal-SPG-SeriesG5MG-v2MG-Lite-p-1158297.html?p=MW2604548780201404KC
Hope this is useful, please comment with any questions, like, share and subscribe.
Thanks.
My review/comparison video is here youtube.com/watch?v=JIAAtkayvT4
Settings are my usual ones (and closely matched)
WG2/Hero5 Linear 1080/30 with stabilisation on, Osmo 1080/30
I bought the WG2 a couple of months ago, hoping to replace DJI Osmo - it has good points like grab and go, waterproof and adjustable balance to fit camera's from Hero5 Black/Session to Git2 or Gopro3 clones, but has some annoyances, like the lack of metal T-mount, rolling when moved side to side, and not using USB-C charge lead. The DJI Osmo works well, but is bulky, and constant App and firmware updates are really annoying and awkward.
I bought and paid for these with my own money, so suggest you search for cheapest price in your country, but as people always ask for links I got mine from Banggood:
WG2 waterproof Gimbal:
banggood.com/Feiyu-WG2-Waterproof-360-Degree-3-Axis-Gimbal-Camera-Stabilizer-FPV-For-GoPro-433-YI-4K-SJCAM-AEE-p-1162473.html?p=MW2604548780201404KC
WG2 Smart remote control
banggood.com/Feiyu-Tech-Smart-Remote-Control-for-Camera-Gimbal-SPG-SeriesG5MG-v2MG-Lite-p-1158297.html?p=MW2604548780201404KC
Hope this is useful, please comment with any questions, like, share and subscribe.
Thanks.
I bought these with my own money, so suggest you search for cheapest price in your country, but as people always ask for links I got mine from Banggood:
WG2 waterproof Gimbal:
banggood.com/Feiyu-WG2-Waterproof-360-Degree-3-Axis-Gimbal-Camera-Stabilizer-FPV-For-GoPro-433-YI-4K-SJCAM-AEE-p-1162473.html?p=MW2604548780201404KC
Smart remote control
banggood.com/Feiyu-Tech-Smart-Remote-Control-for-Camera-Gimbal-SPG-SeriesG5MG-v2MG-Lite-p-1158297.html?p=MW2604548780201404KC
The selfie stick I really like is the Yunteng 188, I got mine from ebay but you can find them all over amazon etc.
The gopro mount I use in video is from ebay, if you search "gopro quick-release tripod adapter" and scroll down the type shown i video with thumbscrew/screwdriver socket are going for 99p posted.
Hope this is useful, please comment with any questions, like, share and subscribe.
Thanks.
Not hard to fix with a dremel, but RTF shouldn't mean Ready To Fix imho - Harry was very excited to fly them so included some flying bits at end.
I would not recommend the EO12 to anyone, I paid £10 each with some points, but there are better options around for that price, that will work out of the box so I don't feel these are good value or a good choice.
It is a bit wrinkled, but back in one piece and spendable which is the main thing !!
Please like and share !
Weather was perfect, Harry's first ever flight and Evie has only flown on one holiday a few years ago, so great fun and lovely views.
Lovely to see Minack Theatre and Penzance Lido from the air, and lots of other places in between from a different angle, so highly recomended and staff were brilliant at airport.
Canon website says of the 50mm 1.8 STM lens "The near-silent STM (Stepping Motor) technology focuses extremely quickly when shooting photos .....Creating high quality movies is easier with STM as it delivers steady and quiet continuous focusing, so your movies are smooth, and soundtracks only capture the surrounding sounds and not the noise of a focusing motor."
This seems to be total rubbish as focus noise is very loud, which I can't understand, as it makes it useless for video, which I thought was one of the main reasons for STM ?
Comparison both on M5 body EF 50mm F1.8 STM vs EF-S 18-135mm STM lens which focuses silently, so why is the 50 1.8 STM SO NOISY ??
Looking on youtube some people report this noise, others seem to think its really quiet do the lenses differ so much ??
It seems the lens noise does vary considerably depending on which body you are using, the newer/faster dual pixel autofocus seems especially noisy, so bear this in mind, and ideally if you can find a camera store which will let you test the 50mm STM lens on your body the noise may be acceptable for your needs.
Testing Hero 5 session on headstrap, Superview vs Linear modes (both 1080/30)
I think Linear works better but superview shows DX8 in view so both have merits, I'm not convinced the stabilisation works well in superview (not surprising as there is no spare 'space' at edge for compensation).


