One hour of greeble - Live workshop at the Blender Conference 2022 linolafettatnet 2022-10-31 | Hello there, this is a break down of my workflow for the "one hour of greeble" images. It is a recording of a live workshop session done at the Blender Conference 2022.In this video i explain how to create huge sci fi greeble scenes quickly and show how to manage them efficiently.A huge thanks to the Blender Foundation to give me an opportunity to have a talk at the Blender Conference. It was an incredible experience.Original upload by the Blender Foundation:youtube.com/watch?v=pKxbSiK6NE0"One hour of greeble" by Lino ThomasBlender Conference 20222022-10-29 11:30 at the classroom.
One hour of colours - Live workshop at the Blender Conference 2024 linolafettatnet 2024-10-27 | This is a tutorial session containing my workflow for creating better looking scenes. I will talk about light, colours and space ships ;)We had slight technical issues, but thanks to a member of the audience, we could start the tutorial on his laptop, thanks again! Please excuse the slightly slower render performance, i tried my best to convey the principles with the limited performance.A huge thanks to the Blender Foundation to give me an opportunity to have a talk at the Blender Conference. It was an incredible experience.Original upload by the Blender Foundation:youtube.com/watch?v=Xqne7oRxSjM"One hour of colours" by Lino ThomasBlender Conference 20242024-10-23 12:00 at the Felix Meritis, Amsterdam, classroom.
How to become faster in Blender - Quick Blender tutorial linolafettatnet 2024-08-04 | Ever wondered how some people seem to create assets so much quicker than you ever could imagine? If you like to support me and get the files, stop by my Patreon page. patreon.com/LinoThomasIn this tutorial i show you the tools and tricks i use to gain some speed while working on my artworks.
How to debug your colours - Quick Blender tutorial linolafettatnet 2024-04-28 | Ever got stuck with tweaking your light colours in your render?If you like to support me and get the files, stop by my Patreon page. patreon.com/LinoThomasIn this tutorial i show you the "Vectorscope" and a very simple example on how to use it to tweak a imperfect colour contrast and improve your light setup!
How to create a circular array - Quick Blender tutorial linolafettatnet 2024-01-25 | Did you struggle to create circular arrays in Blender?If you like to support me and get the files, stop by my Patreon page. patreon.com/LinoThomasHere is a quick tutorial on how to create a circular symmetry or radial array in Blender. Don't be scared of using geometry nodes, they are really useful and by packaging up the project into an asset, its really a thing you have to do only once :)Instead of only using the geometry as an input, you can also use collections to create even crazier arrays!
How to create reflectors - 60 second Blender tutorial linolafettatnet 2024-01-18 | Ever wondered how you can create retro reflective surfaces in Blender?If you like to support me and get the files, stop by my Patreon page. patreon.com/LinoThomasIn this super short tutorial i explain how to use a dense volume to reflect light back to the light source!Useful to create cat eye reflectors which are used on roads or clothing.
How to create hot glowing metal - Quick Blender tutorial linolafettatnet 2024-01-11 | A reusable material to make your assets glow like hot metal!If you like to support me and get the files, stop by my Patreon page.https://www.patreon.com/LinoThomasI am introducing you to the "blackbody" node which will make the heat glow in the right colour! Additionally i show how to create a mask for the effect by using the ambient occlusion shader as well as on how to make it reusable as an asset for other projects.
How to create night vision goggles - Quick Blender tutorial linolafettatnet 2024-01-04 | A bit longer this time but full of tricks!If you like to support me and get the files, stop by my Patreon page.patreon.com/LinoThomasThe entire trick revolves around boosting only the green colours through a refraction shader. It will filler out pure red or pure blue light, therefore never fully saturate your light sources for this trick to work with them.Visit me on Artstation: artstation.com/linolafett
Lifeboat.. in space! - Endless Engines competition submission linolafettatnet 2023-03-04 | Hello Youtube!Here is my entry for the “Endless engines” challenge of clint (pwnisher).The competition contains a basic template animation which you have to exchange with your own assets.Artstation link: artstation.com/artwork/qe990PMy approach to the challenge: As i like space ships, i was thinking about making one. As fighters and similar types are all well known and done to death, i though of a different role - a lifeboat.So collecting references and resources was on the plan and after a bit i had an idea how to make a spaceship look like a rescue boat. I mix elements from coastguard boats and the ISS. Makes total sense, i know.To create the scene i use just assets i have created in the past, the boat is of course now a fresh creation.There is no third party kitbash in the scene. The only paid addon is “flared” for the lovely lensflare.Learned some new things in the artwork, first time spending more time animating things (thanks Christian for the help) and experimenting more with simlation of VFX.Created in Blender 3.4Rendered with Cycles on a 3060 @512-2k samples per frame ~10min each.
How to change the colour of the Chromatic Aberrations - 60 second Blender tutorial linolafettatnet 2020-11-29 | If you are bored by the default blue/red hues of the distortion node, here is a way to colour it differently.Pro tip: Never overdo the Chromatic Aberrations effect, keep it subtle to not have your images scream "CG!" ;)
How to create fake light cones - 60 second Blender tutorial linolafettatnet 2020-03-22 | Sometimes volumetrics are too slow for the result you are going for, in this tutorial i show you how to create fake volumetric light cones for a much quicker rendering.How to make it work in EEVEE:Change the cone materials blend mode to "alpha blend" and add a color ramp node after the subtract node.Thanks to "Justin" to suggest this change!Important: In the "light paths" tab you can find the "max bounces" settings. Do increase the "max bounces" number if any black areas appear when using many light cones.Pro tip: These light cones render noise free with only one sample.You can render them on a separate render layer and add them in the compositor to save even more render time ;)
How to get that space look - 60 second Blender tutorial linolafettatnet 2020-02-09 | A quick run down on how i light up and composite (super reduced node setup though) my space renderings.Please use "medium high contrast"- I did say it right but captured it incorrectly in the video, sorry for that!Make sure your albedo values of your surfaces are roughly where they should be (white paper has a value of ~0.65, there should not be a lot in you scene which is brighter), otherwise your result will be a completely white image.Visit me on Artstation: artstation.com/linolafettI am somtimes on Twitter: twitter.com/linolafett
How to get rid of denoising artifacts - 60 second Blender tutorial linolafettatnet 2020-01-31 | With this you are able to isolate the noisy layers and only need to denoise those. Other channels can stay untouched and the image retains more detail that way.At the end you can also group the denoising setup to use it in other files, too :)Visit me on Artstation: artstation.com/linolafettI am somtimes on Twitter: twitter.com/linolafett
Gravity Gun animation linolafettatnet 2013-10-13 | A very short tracking test done with Blender 2.68. Tracking is not perfect, i have some smaller gliding effects i could not ged rid of. Tracking solver accuracy was about 1,5.Rendered with Cycles renderengine @ 2minutes per frame.
Blender Tutorial- Nützliche Shortcuts für Blender! [Linolafetts shortcutkiste] linolafettatnet 2013-02-23 | Und hier alle Shortcuts in schriftlicher form, weil ich z.b. "steuerung copy" anstatt von "strg+c" gesagt habe ;)Copy Paste:Strg+C(kopieren) Strg+V(einfügen)Objekte unter Mauscursor anzeigen lassen:Alt+ Rechtemaustaste (RMB)Camera zur aktuellen Sicht anpassenStrg+ alt+ RMBBevel ToolStrg+ B (edge Bevel) Strg+ Shift+ B (vertex Bevel)Vertex verbindenJÄhnliche Faces (oder z.B. Materialien) selektierenShift+g dann mit F6 in den optionen den "treshold" ändernZusammenhängende flache Flächen auswählenStrg+Shift+Alt+F und wieder mit F6 den Winkel einstellenUndo history Strg+ Alt+ Z (Das Auge in der Liste zeigt an, welcher Schritt gerade angezeigt wird)Vertex slideG+G , mit Alt lässt sich auch aus der Geometrie raus slidenSonstiges:"Shift" bei vielen Aktionen verlangsamt die Geschwindigkeit der Auswahl"A" über Menüs versteckt oder deckt die Reiter wieder auf.Shortcutliste erstellt mit Blender 2.66, hoffe es hilft :)
Blender tutorial - [cycles] Studiosetup mit Autolack shader linolafettatnet 2013-01-15 | DOWNLOAD DER BLEND:http://www.blendswap.com/blends/materials/studiosetup-and-carpaintnodes-cyclesHier mein erstes Cycles Tutorial. Ein neues Studio Setup geeignet für alles was glänzt und glitzert.
Canadair CL 415 animation linolafettatnet 2011-12-04 | So here is the final rendering of my canadair aircraft. done with blender 2.59 and gimp. music is from:"timberman" found on http://dig.ccmixter.orgrendertime of all frames: about 40h
Modeling an aircraft- CL 415 [timelapse] linolafettatnet 2011-11-22 | So hier nun ein mitgeschnittenes modeling, geasmtzeit 10 stunden, verteilt auf 2 tage.
[makingof]horstermühle linolafettatnet 2011-07-09 | Nabend Leute! :)Dies ist KEIN Tutorial, also bitte nicht erwarten, dass ich euch zeige, wie man dieses Bild baut. Ich zeige nur auf welche Tricks und Kniffs ich genutzt habe und wie ich in etwa vorgehe, wenn ich ein solches Projekt starte. Vielleicht hilfts dem einen oder anderen weiter, allerdings stelle ich mich nicht dem Anspruch, das Video hier als Lehrmaterial vorzuführen ;) Just ein kleines Video, dass zeigt wie ich arbeite.
Blender animation- Horster Muehle linolafettatnet 2011-07-06 | Well this is my latest project done with blender. the modelling is not as complex as you might think, the hardest challenge were the textures and the **** trees :D hope you like it ;) Rendered with blender, the 15 sek clip at the start took 37hours to render o.O music by ccmixer: lasswell
Blender test: Car rig linolafettatnet 2011-02-20 | Ein kleiner test um mein autorig zu überprüfen.die animation zu erstellen, hat vllt 15 minuten gedauert, war also wenig aufwändig, das rig zu erstellen hat allerdings was länger gebraucht ;)tutorial wird evtl volgen, je nach bedarf.gerendert ohne AA, AO oder GI also nicht die renderqualität anmeckern, danköö ;)
Spacecraft done with blender-2011 linolafettatnet 2011-01-08 | Here is my contestentry for a german blender forum. also ill use this spacecraft for my current game project "slot5"done in 3 weeks with blender, rendered also with blendercredits for the backgroundplates of the landingimages: the offical nasa webpage nasa.govsountrack: kevin macleod
P190 RC car done with blender linolafettatnet 2010-11-07 | Here is a older project of mine. i made this model in the first quarter of 2009. now i have a better pc to reder this car so thats the fact why you can see this so late. -this represents not my actual modeling skills- have fun modeling blender 2.48 rendering blender 2.54 music done by "der alas" aka "leuchtstoff" you can find him on deviantart
