Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
Shaggy FPV
Earlier this year I got the chance to film the endshow of hardstyle festival Defqon.1 here in The Netherlands. Their crazy 20 minute fireworks show, choreographed to music, was absolutely huge! With the help of my spotter Niels Meerdink, I managed to capture pretty much every moment of it, and a lot of the footage was used in the official Defqon.1 aftermovie. I also got to film the 50 meter high, light and laser equipped main-stage on the day before it opened. All if this ended up fitting nicely together in this FPV-only edit. Enjoy!
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
updated 6 years ago
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
We thought it would be nice to put some of them together in their full 800fps slowmotion mode, which makes for a nice and relaxing background video. We hope you enjoy it!
More info on our work and drones, check out:
www.dutchdronegods.com
www.instagram.com/dutchdronegods
www.instagram.com/shaggyfpv
@dutchdronegods
Creative director was once again @ReneSebastian
Camera setup: Freefly Ember / 800fps 4k / 17mm laowa
Drone: 6s HoneyBadger FPV Drone / build by Bas van ‘t Hul a.k.a. SniperX_nl
#cinematic #drone #fpv #honeybadger
There are some drawbacks to the system for professional usage which makes it not usable for a lot of situations for us. Yet it's still an insane system for livestreams or for pilots starting out in cinematic FPV.
*EDIT*
Some information I feel like I cut out too much of in hindsight. There is more reason why I don''t switch right away with all my air-units:
Even when not using the system to record, I feel like it has some drawbacks. the super wide 16-9 view leaves less vertical visibility for the pilot, and when using a gopro to record, doesn't get close to matching what you are actually recording. This is not ideal for the pilot, or the director who's watching the screen and doesn't know if a subject will be in frame on the gopro or not.
Besides that, the lens warps on the sides when doing quick yaw turns or orbits (similar to Polar units) which is kinda trippy and not helping spacial awareness for me. It's fine when going straight or slow, but not in faster turns. I think this is because fisheye is fully removed, which makes sense for recording, but not for flying.
Both of these points are basically natural compromises of a device that's made for recording, which are not so bad when you actually record with it. But when you use it for recording with gopro, these are both just simple drawbacks.
Chapters:
0:00 Intro
00:41 Some context
01:30 Size & Setup
02:02 Testing limitations
03:20 On-board recording
07:09 Latency
07:40 Livestream
08:24 Range
09:01 Conclusion
Follow us on instagram for more updates
instagram.com/shaggyfpv
instagram.com/dutchdronegods
GodMode frame and PNP available here:
https://droneshop.nl/dutch-drone-gods-ddg-godmode-drone-cinematic-pnp
If you do get the unit, feel free to use my referral link with DJI:
click.dji.com/ADvjhG8loic5sakB9dnPhg?pm=link
Drone gods website:
www.dutchdronegods.com
So sick to be shooting here again, this time with that other drone god @jedeye_fpv and the @GoPro, @redbulland @the_distillery media teams!
@dutchdronegods
#snowboard #thenines #fpv #drone #drones #droneracing #fpv #cinematics #dronegods #dutchdronegods #ddg
Super happy to have been able to join the Audi Nines winter edition this year. Even though most of my shots were done with the gopro, I wanted to see how a full-BMPC edit would look after some good grading. A nice experiment with a cool result if you ask me. Feel free to comment and let me know what you think!
For info about my work and the things we do with our drones, check out:
www.ducthdronegods.com
Many thanks to my sponsors for helping me get the latest and greatest gear:
DroneShop.nl | TeamBlacksheep | Foxeer | HobbyWing | Azure Power
Grading was done by Rene Sebastian!
Drone setup:
'LePigeon' frame by Sam Stanford
Brotherhobby 2810 1500kv
DALprop 7056x3
Hobbywing G3 stack
TBS Unify Pro32 HV
TBS Crossfire Rx nano diversity
Foxeer Predator V4 mini
Deconstructed BMPC4k camera
Laowa 7.5mm MFT lens
Filmed in 4k50 DCI B-Raw (8-1)
Ground setup:
Fatshark HDO
TBS Fusion receiver
Foxeer Echo Patch + Foxeer Lollipop Omni
TBS Tango 2 pro (250mw)
#fpv #bmpc4k #audinines
We captured these shots using a custom build race drone with a stripped-down Blackmagic Pocket 4k camera with Laowa 7.5mm MFT lens. The footage is completely unstabilised.
More information about our drones and work can be found here:
www.dutchdronegods.com
Many thanks to my sponsors for helping me get the latest and greatest gear:
TeamBlacksheep | Foxeer | HobbyWing | Azure Power
The base frame for this drone and all the information needed to build it was put online by Sam Standord, who is responsible for this crazy tech to now be in our hands! Look him up at his channel or other socials under Straw Hat Sam:
youtube.com/channel/UCnujXSd-ErRVX8UXKt6izsw
Drone setup:
'LePigeon' frame by Sam Stanford
Brotherhobby 2810 1500kv
DALprop 7056x3
Hobbywing G3 stack
TBS Unify Pro32 HV
TBS Crossfire Rx nano diversity
Foxeer Predator V4 mini
Deconstructed BMPC4k camera
Laowa 7.5mm MFT lens
Ground setup:
Fatshark HDO
TBS Fusion receiver
Foxeer Echo Patch + Foxeer Lollipop Omni
TBS Tango 2 pro (250mw)
#fpv #bmpc4k #zandvoort
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
Edit, colors and sfx by Rene Sebastian. Check out his work on rene.io!
For info about my work and the things we do with our drones, check out:
www.dutchdronegods.com
Many thanks to my sponsors for helping me get the latest and greatest gear:
TeamBlacksheep | Foxeer | HobbyWing | Azure Power
Up-to-date setup for filming:
Avantquad Soko 5"
Tattu 1550mah 6s
Foxeer Predator mini v4
TBS Unify Pro32 HV
Azure Vanover props
Hobbywing Xrotor 2306 race pro 1750kv
Crossfire nano rx
HobbyWing G3 Stack (FC and EFC)
GoPro Hero 8
Video:
Fatshark HDO
TBS Fusion receiver
Foxeer Echo Patch + Foxeer Lollipop Omni
Controls:
TBS Tango 2 pro (250mw)
For licensing and usage, contact shaggy@dutchdronegods.com
#cinematic #drone #fpv
If you like what you see, definitely check out the Audi Nines channel, where you can find some crazy edits!
youtube.com/user/nineknights1
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' or use the link below for $5 off
http://www.reelsteady.com/shaggy
Up-to-date setup for filming:
Avantquad Soko 5"
Bonka PSN 1300mah 6s / Tattu 1550mah 6s
Foxeer Predator mini v4
TBS Unify Pro32 HV
Azure Vanover props
Hobbywing Xrotor 2306 race pro 1750kv
Crossfire nano rx
HobbyWing G3 Stack (FC and EFC)
GoPro Hero 8
Ground setup:
Fatshark HDO
TBS Fusion receiver
Foxeer Echo Patch + Lollipop Omni
TBS Tango2
Music: HOPEX - Movie
Provided by Copyright Free Trap:
youtu.be/2VMQ0blX8tA
Reelsteady GO was used to stabilize this footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
For more information, videos and and how to hire me for a shoot, check out www.dutchdronegods.com!
We were not lucky with the weather, since it's normally sunny 95% of the time and we managed to catch that one overcast day. Especially the high winds made the shoot quite difficult at some point and forced me to use the bigger drones for a lot of these shots. But in the end the client is happy with the results and so am I. The final edit of this footage combined with some DJI Inspire footage has been published on the Marjan Resort website and social media. Go check that out if you're curious!
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' or use the link below for $5 off
http://www.reelsteady.com/shaggy
Video:
Fatshark HDO with IRC Rapidfire
Foxeer Echo Patch
Foxeer Lollipop Omni
Taranis X9D Plus
Crossfire TX with diamond antenna
Music from artlist.io
Most of these shots are from the last quarter of 2019, when I quit my office job and started spending more time on shoots and got all my gear in order. I've also spent a lot of time building the Dutch Drone Gods together with Jedeye_FPV and ThomasFPV. Really proud of what we've set up, with a lot more cool stuff to come!
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' or use the link below for $5 off
http://www.reelsteady.com/shaggy
The result is a little bit different than what I'm used to making. It's definitely not a fast paced edit, or something you will watch while scrolling your YouTube timeline. Maybe it's best to sit back, get your favorite beverage, put this on the biggest screen you own and enjoy the scenery!
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
I have to thank this list of awesome companies helping me stay in the air with the best products possible:
QuadcoptersEnzo
Dinogy
Foxeer
HobbyWing
Azure Power
CherryCraft
DRL
Locations for these shots:
1) Tjoltabreen (Kattanakken ridge) - Jostedalsbreen
2) Myrdal - Aurland
3) Oldevatnet - Olden
4) Kjelfossen - Gudvangen
5) Melkevollbreen (Kattanakken ridge) - Jostedalsbreen
Edit: I get a lot of questions about the range. Some shots look like they were very far, but in fact I didn't get much further out than 3km. In a clean environment like this, that range is easily done with the setup listed below.
Setup used:
Avantquad Soko 5"
Dinogy Ultra 1800mah 6s 65c / 1600mah 6s 80c
Foxeer Predator mini v4
TBS Unify Pro32 HV
Azure JohnnyFPV Props
Hobbywing Xrotor 2306 race pro 1750kv
Crossfire nano rx
HobbyWing G3 Stack (FC and EFC)
GoPro Hero 6
Video:
Fatshark HDO
IRC Rapidfire
Foxeer Echo Patch + Lollipop Omni
Controls
Taranis X9D Plus
Crossfire TX with diamond antenna @100mw
Music: Run by Tristan Barton
I hope you enjoy this short collection of shots from that trip! If you want to see more clips and longer takes, make sure to follow me on instagram (@ShaggyFPV). I'll be posting a few longer takes from this video on there soon.
Reelsteady GO was used to stabilize the footage. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off.
Thanks to my sponsors for keeping me in the air!
QuadcoptersEnzo
Dinogy
Foxeer
HobbyWing
Azure Power
CherryCraft
DRL
Setup used:
Avantquad Soko 5"
Dinogy Ultra 1800mah 6s 65c / 1600mah 6s 80c
Foxeer Predator mini v4 (http://tiny.cc/QEFoxeerPredator)
TBS Unify Pro32 HV (http://tiny.cc/QETbsUnify)
Azure JohnnyFPV Props (http://tiny.cc/QEAzureJohnny)
Hobbywing Xrotor 2306 race pro 1750kv (http://tiny.cc/QEHobbywingXrotor2306)
Crossfire nano rx (http://tiny.cc/QECRSFNano)
HobbyWing G3 Stack (FC and EFC) (http://tiny.cc/QEHWG3)
GoPro Hero 6
Video:
Fatshark HDO (http://tiny.cc/QEHDO)
IRC Rapidfire (http://tiny.cc/QERapid)
Foxeer Echo Patch + Lollipop Omni (http://tiny.cc/QEFoxeerLolli)
Controls
Taranis X9D Plus (http://tiny.cc/QETaranis)
Crossfire TX with diamond antenna @100mw (http://tiny.cc/QETbsCrsfTx)
Once more, Reelsteady GO was used to stabilize the footage. It's all I use these days. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off!
Thanks to my sponsors for keeping me in the air!
QuadcoptersEnzo
Emax
Dinogy
Airbot
Foxeer
Azure Prop
CherryCraft
DRL
Setup used:
Avantquad Soko 5"
Dinogy Ultra 1800mah 6s 65c / 1600mah 6s 80c
Foxeer Predator mini v4 (http://tiny.cc/QEFoxeerPredator)
TBS Unify Pro32 HV (http://tiny.cc/QETbsUnify)
Azure JohnnyFPV Props (http://tiny.cc/QEAzureJohnny)
Hobbywing Xrotor 2306 race pro 1750kv (http://tiny.cc/QEHobbywingXrotor2306)
Crossfire nano rx (http://tiny.cc/QECRSFNano)
HobbyWing G3 Stack (FC and EFC) (http://tiny.cc/QEHWG3)
GoPro Hero 6
Video:
Fatshark HDO (http://tiny.cc/QEHDO)
IRC Rapidfire (http://tiny.cc/QERapid)
Foxeer Echo Patch + Lollipop Omni (http://tiny.cc/QEFoxeerLolli)
Controls
Taranis X9D Plus (http://tiny.cc/QETaranis)
Crossfire TX with diamond antenna @100mw (http://tiny.cc/QETbsCrsfTx)
For licensing and usage, contact: licensing@viralhog.com
A lot of thanks to the Drisag people for letting me buzz around their heads and sitting in for the shots.
For this one I used Reelsteady to smooth out the video a bit more than hypersmooth could do. This was my first time using the AfterEffects plugin, so it's not 100% perfect. Definitely takes a bit more of a leaning curve than Reelsteady GO, but after that it offers some great customization options. In any case, if you are thinking of getting Reelsteady, make sure to use the coupon code 'SHAGGYFPV' for $5 off!
Thanks to my sponsors for keeping me in the air!
QuadcoptersEnzo
Emax
Dinogy
Airbot
Foxeer
Dal prop
CherryCraft
DRL
Setup:
Shendrones Squirt V2
Airbot Typhoon 35A 4in1 (goo.gl/h67j4c)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
Airbot Omnibus F4 V6 (goo.gl/kNpdox)
Foxeer Falkor (goo.gl/UGPHu7)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Brotherhobby 1307 3600kv
HQ 4043x3 VS1 chopped down to 3"
Different 1050 and 850 lipo's
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 7 (@2.7k60 and 4k30) w/ Hypersmooth
I used Reelsteady GO to stabilise all of my GoPro Hero 6 footage for this video. Absolutely crazy how well this software works. If you are thinking of getting it, make sure to use the coupon code 'SHAGGYFPV' for $5 off!
Thanks to my sponsors for keeping me in the air!
QuadcoptersEnzo
Emax
Dinogy
Airbot
Foxeer
Dal prop
CherryCraft
DRL
Setup
Avantquad Soko 5"
Dinogy Platinum 1300mah 6s 130c (http://tiny.cc/thbj9y)
Foxeer Predator v3 (goo.gl/W3Nmki)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Azure JohnnyFPV Props
Hobbywing Xrotor 2306 race pro 1600kv
Airbot Typhoon 35A 4in1 (goo.gl/h67j4c)
Crossfire nano rx (http://tiny.cc/bkbj9y)
Airbot Omnibus F4 V6 (goo.gl/kNpdox)
GoPro Hero 6
Nelis and SirCrashalot were the chase subjects of this session, check out their channels for more perspectives:
Nelis: youtube.com/channel/UC4FYyXr92dLYl3D9cDZmyXA
Sir.Crash: youtube.com/channel/UC0HQ5Mb-bmR1tSE5cjP2YYA
For more of my work, check out my other channels:
instagram.com/shaggyfpv
facebook.com/shaggyfpv
airvuz.com/user/shaggyfpv
Thanks to my sponsors:
QuadcoptersEnzo
EpiQuad
Emax
Dinogy
ImmersionRC
Airbot
Foxeer
Dal prop
CherryCraft
Setup:
CherryCraft Staccato (2.5mm) (goo.gl/iMwvZm)
Emax RSII-2306 2600kv (goo.gl/XUUdFf)
Dinogy Graphene ULTRA 1850 (goo.gl/8WSuiC)
Foxeer Predator v3 (goo.gl/W3Nmki)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Dal Cyclone 5249x3 (goo.gl/54erSF)
Airbot Typhoon 35A 4in1 (goo.gl/h67j4c)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
Airbot Omnibus F4 V6 (goo.gl/kNpdox)
Thanks to my sponsors:
QuadcoptersEnzo
EpiQuad
Emax
Dinogy
ImmersionRC
Airbot
Foxeer
Dal prop
Freestyle setup:
AstroX X5 JohnnyFPV Edition frame
Emax RSII-2306 2600kv (goo.gl/XUUdFf)
Dinogy Graphene ULTRA 1850 (goo.gl/8WSuiC)
Foxeer Falkor (goo.gl/UGPHu7)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
HQ 5048x3 (goo.gl/cNVcnm)
Airbot Typhoon 35A 4in1 (goo.gl/h67j4c)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
Airbot Omnibus F4 V6 (goo.gl/kNpdox)
Cinewhoop setup (opening shot and reversed shot)
Shendrones Squirt V2
Airbot Typhoon 35A 4in1 (goo.gl/h67j4c)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
Airbot Omnibus F4 V6 (goo.gl/kNpdox)
Foxeer Falkor (goo.gl/UGPHu7)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Brotherhobby 1307 3600kv
HQ 4043x3 VS1 chopped down to 3"
Different 1050 and 850 lipo's
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 7 (@2.7k60)
Music: Run The Jewels - Run The Jewels
All external shots done by Rene Sebastian, as well as the Gopro Fusion 360 editing! Check out his channel for some of his work: youtube.com/channel/UCPly0Tzr9Wdovm16zI2t1AQ
For more of my work, check out my other channels:
instagram.com/shaggyfpv
facebook.com/shaggyfpv
airvuz.com/user/shaggyfpv
Many many thanks to my sponsors for the support to make these shots possible:
QuadcoptersEnzo.nl
Emax USA
Dinogy
EpiQuad
ImmersionRC
Foxeer tech
Setups used:
Freestyle / chase :
AstroX X5 JohnnyFPV Edition frame
Emax RSII-2306 2600kv (goo.gl/XUUdFf)
Dinogy Graphene ULTRA 1850 (goo.gl/8WSuiC)
HQ 5048x3 (goo.gl/cNVcnm)
Long range / gopro fusion:
Kwadworx Skinny Screamer 5.5" true-x
Emax LS2207 1900kv
GF Flash 5552x3
Dinogy Graphene Ultra 1600mah 5s
Electronics:
Foxeer Predator v3 (goo.gl/W3Nmki)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Aikon AK32 35A 4in1 (goo.gl/4wkhyb)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
DYS F4 Pro v2 (goo.gl/jLESD2)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 / 7
After battling my way into the top 3, this was the last all or nothing battle for the podium. Dunkan was faster in lap one, but I managed to catch up at the end of the second lap, resulting in a super close finish!
Congrats to Dunkan for taking first and Nubb for taking 3rd! Happy to be on the podium between these awesome guys.
Thanks a lot to DRL for inviting me this season and having me race these insane locations!
Gear: Racer3S
Location: BMW Welt, Munich Germany
I'm also super happy with this fresh freestyle setup right now. The Johnny frame is just awesome, but those Emax RSII-2306 2600kv just add so much low-end punch.
Thanks to my sponsors:
QuadcoptersEnzo
EpiQuad
Emax
Dinogy
ImmersionRC
Setup used:
AstroX X5 JohnnyFPV Edition frame
Emax RSII-2306 2600kv (goo.gl/XUUdFf)
Dinogy Graphene ULTRA 1850 (goo.gl/8WSuiC)
Foxeer Predator v3 (goo.gl/W3Nmki)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
HQ 5048x3 (goo.gl/cNVcnm)
Aikon AK32 35A 4in1 (goo.gl/4wkhyb)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
DYS F4 Pro v2 (goo.gl/jLESD2)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 7 (@4k30) with ND16 filter
Music: Jerry Folk - Take Three
After a slow start and a little mistake exiting the upper level, I had to start chasing the top 3. In the Players Tunnel I managed to get a good line, overtaking Dino, Gab and Rafa in one go. I held on to this first position for most of the second lap after that, until the Players Tunnel on lap 2. This time I went too fast in and missed my line completely, giving Gab a big lead 2 turns before the finish. Something I could not come back from.
Thanks a lot to DRL for inviting me this season and having me race these insane locations!
Gear: Racer3S
Location: Allianz Riviera stadium in Nice, France
It was a good chance for me to test out my new Emax RSII-2306 2600kv quad with a gopro (and heavy smoke bomb), and they held up very well! Lots of power, especially in the lower end.
Thanks again Rene Sebastiaan for designing another epic track! (he's featured in the video at 0:14). Also congrats to winner NelisFPV who was ripping the whole day and can now call himself the dutch champion!
But most of all thanks to my sponsors for helping me through this entire season of racing!
QuadcoptersEnzo
EpiQuad
Emax
Dinogy
ImmersionRC
Setup used:
EpiQuad 205R Light (goo.gl/L3zMX8)
Emax RSII-2306 2600kv (goo.gl/XUUdFf)
Dinogy Graphene ULTRA 1850 (goo.gl/8WSuiC)
Foxeer Predator v3 (goo.gl/W3Nmki)
ImmersionRC Tramp HV (goo.gl/Wr6qN5)
Dal cyclone 5050x3 (goo.gl/cNVcnm)
Aikon AK32 35A 4in1 (goo.gl/4wkhyb)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
Betaflight FC (goo.gl/6MJ6Uq)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Sessioin 5
There is some slight jitter when watching this full screen, something I just couldn't get rid of while tuning this quad. After the trip it turned out my Betaflight F4 board was the cause. I guess it just doesn't work well with the setup that I have... I promise my next video's will be jitter free :)
Location: "Col de la Sauce' hiking trail in Savoie, France. At ~2400m, this ridge leads up to the Mont Blanc.
Special thanks to my sponsors for getting me the gear to do this kind of crazyness!
- QuadcoptersEnzo
- Emax
- Dinogy
Setup:
Kwadworx Skinny Screamer with carbon top
Emax LS2207 1900kv
Gemfan Flash 5551
Dinogy Ultra 1500 5s
DYS 30a 4in1 ESC
Gopro Hero 5 Black
ImmersionRC Tramp HV
Foxeer Lollipop
TBS Crossfire Micro + ImmortalT
We arrived at the spot with low expectations, since it was raining during our first hour there. We almost left, but decided to wait it out a little longer. When it cleared up and even the sun came through, everything worked out! Managed to do a bunch of freestyle lines I'm happy with, record a LOT of proper chase footage and my one freestyle quad kept working properly.
Original video from Boris here: youtube.com/watch?v=BBxIxNyonQw
Chase footage is from QE/EpiQuad teammate Thomas FPV, who's smooth lines are easy to follow. Look him up on youtube: youtube.com/channel/UCIziY3YQps3b5CPHfcMqEsA
Thanks so much to my main sponsor Quadcopters Enzo for supporting me with all the gear needed to go out and do these kinds of shenanigans.
quadcoptersenzo.nl
epiquad.eu
dinogylipos.com
immersionrc.com
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Setup:
Kwadworx Skinny Screamer true-x
Emax LS2207 2550kv (goo.gl/6hGDu3)
Dinogy Graphene ULTRA 1500 / 1850 (goo.gl/HTuaDT)
Aikon sefm 30a 4in1 (goo.gl/41pXLV)
Gemfan Flash 5152
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
Betaflight FC (goo.gl/6MJ6Uq)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5
Unfortunately I only managed to grab 4th place behind Vince, Dino and winner Dennis (DroneD FPV). Happy with the points, but could have been better, as always :) Had many mid-airs and a few mistakes in the other runs, making me lack behind a little in lap times. The GoPro run however went quite well!
Thanks so much to my main sponsor Quadcopters Enzo for supporting me with all the gear needed to get this far!
quadcoptersenzo.nl
epiquad.eu
dinogylipos.com
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Setup:
EpiQuad prototype
Emax LS2207 2550kv (goo.gl/6hGDu3)
Dinogy Graphene ULTRA 1500 (goo.gl/HTuaDT)
Aikon sefm 30a 4in1 (goo.gl/41pXLV)
Dal5050 triblade
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
Betaflight FC (goo.gl/6MJ6Uq)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5
This awesome technical indoor track was set up by Team MRO. Super fun day with them, as well as a bunch of other fast pilots joining in, including Dino with his Racer3. Even my buddy and sponsor Pieter from QuadcoptersEnzo joined from 200km away to help with the timing system.
Thanks a lot to team MRO for making this day possible.
Thumbnail picture by Rene Sebastian
youtube.com/channel/UCPly0Tzr9Wdovm16zI2t1AQ
Gear:
Racer3 (6" 5S @ 1kg AUW)
Fatshark Dominator
Furiousfpv true-d 3.6
Taranis DX9 Plus
TBS Crossfire
Music: Lettuce - The Lobbyist
Again a massive thanks to DCL for these awesome events and IRC Racing for getting me on board for the last two races of the season! Also Pieter from QuadcoptersEnzo for repairing all our gear this weekend :)
Flown with a custom build DCL frame by Immersion RC.
T-motor F60
Gemfan Flash 5152
Connex prosight
GoPro Session 4
Many thanks to Quadcopters Enzo and Emax for getting me this gear to crash around with!
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Many thanks to my sponsors for keeping my flying up to spec!
www.quadcoptersenzo.nl
www.dinogylipos.com
www.emax-usa.com
www.aikon-electronics.com
Setup:
Skinny Screamer frame (prototype)
Emax LS2207 2550kv (goo.gl/6hGDu3)
Dinogy Graphene ULTRA 1500 (goo.gl/HTuaDT)
Aikon sefm 30a 4in1 (goo.gl/41pXLV)
Gemfan Flash 5152x3 V2 (goo.gl/QLKmeK)
Crossfire Micro receiver v2 (goo.gl/FoF4EU)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
Betaflight FC (goo.gl/6MJ6Uq)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5
Sorry about the bad quality. My DVR isn't that good, lens was a bit out of focus our of the box and had to crop it to fit 16:9... Please don't watch full screen :)
Thanks to team MRO for organising this build day, with a proper build guide, good location and a little racetrack afterwards!
More info on this little 2s monster can be found here: http://fishpepper.de/projects/pepperf1sh/
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Many thanks to my sponsors for supporting me:
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
PepperFIISH frame (83mm)
56mm props
racerstar 1103 8000kv
2s 300mah nanotech lipo
tinyfish fc
furiousfpv fishPEPPER 4in1 esc
Flown with a custom build DCL frame by Immersion RC.
T-motor F60
Gemfan Flash 5152
Connex prosight
GoPro Session 4
Music: Them Crooked Vultures – New Fang
Unfortunately we had only one or two lipo's on it before the LED track had to be broken down again due to the overly strict regulations in the Netherlands! Lets hope that will change some time soon, because half an hour of racing is not worth setting up a complete LED track!
Many thanks to the organisation of the NK and the Delta people for getting this weekend together and letting us camp on their grounds.
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Many thanks to my sponsors for supporting me throughout these races!
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Shendrones Zoompod on a custom base plate
Betaflight FC (goo.gl/6MJ6Uq)
FrSky XM+ (goo.gl/XGSXp9)
BBB 2206 2300kv
Dinogy Graphene ULTRA 1300
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
This vid is a bit long, boring and unedited, but sometimes it's fun to just see the full uncut action. Hope you enjoy it anyway.
More short clips on my FB and insta:
facebook.com/shaggyfpv
instagram.com/shaggyfpv
Many thanks to my sponsors for supporting me throughout these races!
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Shendrones Wingsuit on a custom base plate
Betaflight FC (goo.gl/6MJ6Uq)
FrSky XM+ (goo.gl/XGSXp9)
Emax 2205s 2300kv
Dinogy Graphene ULTRA 1300
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
Footage is not from the winning runs, but mostly practice matches and gopro runs during breaks. For more footage and the winning laps, check out my instagram channel:
instagram.com/shaggyfpv
Many thanks to my sponsors for supporting me throughout these races!
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Mixuko + Zoompod
Betaflight FC (goo.gl/6MJ6Uq)
FrSky XM+ (goo.gl/XGSXp9)
Emax 2205 2300kv
Dinogy Graphene ULTRA 1300, 1500 and MEGA 1550
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
New Fang - Them Crooked Vultures
Had most of my quads broken so I used with my bashed-up true-x mixuko with zoompod and a combination of 2206 and 2306 motors :) But it worked, handled 5s, and survived about 20.000 hard crashes throughout the day!
Many thanks to my sponsors for keeping me in the air:
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Mixuko + Zoompod
Betaflight FC (goo.gl/6MJ6Uq)
FrSky XM+ (goo.gl/XGSXp9)
3x BBB 2206 2300kv, 1x emax 2306 2400kv (goo.gl/HvzYkM)
Littlebee 30a (goo.gl/FsJLKL)
Dinogy Graphene 2.0 1300 and MEGA 1350 5S (goo.gl/CYN8ZN)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Rival Sons - Hollow Bones Pt. 2
Sponsored by:
www.epiquad.eu
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Hyperlite Evo
Betaflight FC (goo.gl/6MJ6Uq)
FrSky XM+ (goo.gl/XGSXp9)
BBB 2206 2300kv
Littlebee 30a (goo.gl/FsJLKL)
Dinogy Graphene MEGA 1350 5S (goo.gl/CYN8ZN)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Music: New Fang - Them Crooked Vultures
Such a huge opportunity to be able to fly and compete agains top pilots inside the Amsterdam ArenA. Many thanks to FormulaFPV for inviting me to this event and supporting me through it.
These are the awesome guys supporting me, Pieter from Quadcopters Enzo even joined me at the event itself!
www.quadcoptersenzo.nl
www.dinogylipos.com
www.epiquad.eu
Setup:
Shendrones Full Tilt Boogie L + Zoompod
DYS F4 FC (goo.gl/5II17x)
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Gemfan Flash 5152 (goo.gl/9OWxpT)
Dinogy Graphene 2.0 ULTRA 1500 (goo.gl/rp4Q2K)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Connex prosight with race antenna
Lots of thanks to Droneracers.nl for organizing this and setting up a very short but awesome track!
Sponsored by:
www.epiquad.eu
www.quadcoptersenzo.nl
www.dinogylipos.com
Setup:
Shendrones Full Tilt Boogie L + Zoompod
DYS F4 FC (goo.gl/5II17x)
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Dal Cyclone 5046 (goo.gl/XxwrtP)
Dinogy Graphene 2.0 ULTRA 1500 (goo.gl/rp4Q2K)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Music: Dr. Hypenstein - Redtenbacher's Funkestra
Visit the Team MRO website and channel for more footage and upcoming events:
www.team-mro.nl
www.youtube.com/channel/UCjnJRAIuihsUtlxXCY5uaxw
And many thanks to my sponsors:
www.epiquad.eu
www.quadcoptersenzo.nl
www.dinogylipos.com
Shendrones Full Tilt Boogie L + Zoompod
DYS F4 FC (goo.gl/5II17x)
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Dal Cyclone 5046 (goo.gl/XxwrtP)
Dinogy Graphene 2.0 ULTRA 1500 (goo.gl/rp4Q2K)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Visit the Team MRO website and channel for more footage and upcoming events:
www.team-mro.nl
youtube.com/channel/UCjnJRAIuihsUtlxXCY5uaxw
And many thanks to my sponsors:
www.epiquad.eu
www.quadcoptersenzo.nl
Shendrones Full Tilt Boogie L + Zoompod
Motolab Cyclone
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Dal Cyclone (goo.gl/JFGGaU)
Dinogy Graphene 2.0 1300 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Instagram: instagram.com/shaggyfpv
www.quadcoptersenzo.nl
www.epiquad.eu
Setup:
Shendrones Full Tilt Boogie L Zoompod
Motolab Cyclone
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Dal Cyclones (goo.gl/fjMmkh)
Dinogy Graphene 1500 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Organised by: www.droneracesupport.com
www.drone040.nl
www.team-mro.nl
www.microlab-eindhoven.nl
www.epiquad.eu
www.quadcoptersenzo.nl
Follow me on Instagram as well! instagram.com/shaggyfpv
Setup:
Shendrones Mixuko Zoompod
Motolab Cyclone
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Dal Cyclones (goo.gl/fjMmkh)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
And:
EpiQuad 210x (goo.gl/cllzRJ)
- with lowrider kit (goo.gl/Z4n2Sm)
EpiPDB (goo.gl/GE5vKx)
EpiRex (goo.gl/dfGorW)
EpiFC (goo.gl/kBIFK5)
ZMX Fusion 2206 (goo.gl/WcIeq6)
Littlebee_s 30a (goo.gl/4ngIzS)
Dal Cyclones (goo.gl/fjMmkh)
All epic slomo and other non-gopro footage made by Rene! Check out his channel for the full edit for this event:
youtube.com/channel/UCPly0Tzr9Wdovm16zI2t1AQ
Also visit the Team MRO website and channel for more footage and upcoming events:
www.team-mro.nl
youtube.com/channel/UCjnJRAIuihsUtlxXCY5uaxw
And if that isn't enough, my instagram channel is right here:
instagram.com/shaggyfpv
www.epiquad.eu
www.quadcoptersenzo.nl
Music in this edit:
Anyone - Keith Kenniff
Devil (20syl remix) - Electro Deluxe
Shendrones Mixuko Zoompod
Motolab Cyclone
FrSky XM+ (goo.gl/XGSXp9)
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Emax Maverick (goo.gl/kLAZ3E)
Gemfan 5x4x4 (goo.gl/pHYROl)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 5 Session
Thanks to all the guys from DRB for this nice day and getting us pizza for lunch.
Follow me on instagram as well:
instagram.com/shaggyfpv
www.epiquad.eu
www.quadcoptersenzo.nl
Shendrones FullTiltBoogy Zoompod
Motolab Cyclone
FrSky X4R-sb
Emax rs2205s 2300kv (goo.gl/FYDOk6)
Littlebee_s 20a (goo.gl/4ngIzS)
Gemfan 5x4x4 (goo.gl/pHYROl)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session
All footgage after 0:12 is done with the EpiPod frame, the crash footage before that is with the FullTiltBoogy frame with zoompod
Picture of the frame:
instagram.com/p/BNtokYKguq_
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
EpiQuad prototype frame
Motolab Tempest
EpiRex (goo.gl/dfGorW)
EpiFC (goo.gl/kBIFK5)
ZMX Fusion 2206 (goo.gl/WcIeq6)
Littlebee_s 30a (goo.gl/4ngIzS)
Gemfan 5x4x4 (goo.gl/pHYROl)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session
Thanks a lot to Ale-Jan de Vries for arranging this session and the people from the TT circuit for allowing us on the track.
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
Mixuko with Zoompod
x4r receiver
Motolab Cyclone
rcInpower 2205 2300kv
Littlebee pro 20a
Gemfan 5x4x3 (http://goo.gl/gE1w0b)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
/ Mylipo.de 1300 75C
ImmersionRC Tramp HV (goo.gl/NsuWLf)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
Mixuko with Zoompod
x4r receiver
Motolab Cyclone
rcInpower 2205 2300kv
Littlebee pro 20a
Gemfan 5x4x3 (http://goo.gl/gE1w0b)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
/ Mylipo.de 1300 75C
ImmersionRC Tramp HV (goo.gl/NsuWLf)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
EpiQuad 210x (goo.gl/cllzRJ)
- with lowrider kit (goo.gl/Z4n2Sm)
EpiPDB (goo.gl/GE5vKx)
EpiRex (goo.gl/dfGorW)
EpiFC (goo.gl/kBIFK5)
ZMX Fusion 2206 (goo.gl/WcIeq6)
Littlebee_s 30a (goo.gl/4ngIzS)
Gemfan 5x4x3 (http://goo.gl/gE1w0b)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
/ Mylipo.de 1300 75C
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session
Gopro Hero 5 chest cam
Also got the chance to test the EpiQuad Pod prototype with the new Zmx Fusion 2206 motors, which flies amazing!
Lots of thanks to MRO & co for organising this event!.
Also a big thanks to my awesome sponsors that always manage to hook me up with some new product or prototype:
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
EpiQuad 210x (goo.gl/cllzRJ)
- with lowrider kit (goo.gl/Z4n2Sm)
EpiPod prototype (all ground-based shots)
EpiPDB (goo.gl/GE5vKx)
EpiRex (goo.gl/dfGorW)
EpiFC (goo.gl/kBIFK5)
ZMX Fusion 2206 (goo.gl/WcIeq6)
Littlebee_s 30a (goo.gl/4ngIzS)
Gemfan 5x4x3 (http://goo.gl/gE1w0b)
Dinogy Graphene 1300 70C (goo.gl/kBdmJG)
/ Mylipo.de 1300 75C
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Hero 4 Session for on-board footage
Gopro Hero 5 for all other shots
Pictures of the lowrider customisation:
instagram.com/p/BKoyOECAxS8
www.epiquad.eu
www.quadcoptersenzo.nl
Setup:
EpiQuad 210 (goo.gl/cllzRJ)
EpiPDB (goo.gl/GE5vKx)
EpiRex (goo.gl/dfGorW)
EpiFC (goo.gl/kBIFK5)
Emax 2205 2300kv (goo.gl/HFM9ZJ)
Littlebee_s 30a (goo.gl/4ngIzS)
Gemfan 5x4x3 (http://goo.gl/gE1w0b)
Bonka 1300 75C (goo.gl/3BsBSh)
ImmersionRC Tramp HV (goo.gl/2wyzf0)
FrSky Taranis Plus (goo.gl/vggjYK)
GoPro Session


