Clearing new peat land MeriPeat MJK-350 DTG + Valtra Suokone Oy 2017-11-30 | Clearing new peat land in Finland. Subsoiling is done 30-40 cm below the ground. All the vegetation and stumps are crushed in that layer.Crusher mulcher is c/w 250hp farm tractor,he bog clearing machinery developed and manufactured by Suokone is well suited both for clearing new bogs and maintaining old ones.The machinery can also be used to make agricultural fields on bog-based land.Screw ditchers have turned out superior in ditching, which is also possible during ground frost.Preparing millers are used to chop down bog surface growth, stumps and snags.With screw levellers, production areas can be reshaped into an optimal form, in order to keep the areas dry even during rainy summers.With profiling millers, any risen ditch borders can be removed. The worked result will spread evenly over the strip, and may be collected into the peat stack as normal milled peat product. The use of a profiler 4-5 times during the summer will save a lot of time in autumn preparation.More: suokone.comMore: meripeat.com
Asphalt recycling with MeriRoad crusher RC90-221 DTG Suokone Oy 2024-10-08 | MeriRoad crusher RC90-221 DTG is ideal crusher for on-site asphalt recycling. It can crush asphalt upto a 20cm thick layer.On-site asphalt recycling with tractor mounted MeriRoad crusher is cost effective and much more environmental friendly way to recycle and maintain damaged asphalt roads and streets.for more information.mericrusher.com/en/products/meriroad-equipment
Mountain road maintenance with meriRoad- equipment Suokone Oy 2024-10-08 | Tractor mounted MeriRoad equipment are ideal for maintaining gravel based roads almost in every condition. This video shows how the road maintenance is done almost 2500m altitude in narrow mountain road. Crusher RC65-221 DTG opens the road. MeriGrader profiles and levels the crushed material MeriPacker compacts the maintained road. Recycling is cost effective and environmentally friendly way to do the job.for more informationmericrusher.com/en/products/meriroad-equipment
Forest hauling road maintenance with MeriRoad equipment. Suokone Oy 2024-05-22 | Road maintenance with MeriRoad equipment.The same method can be used on small forest and agricultural roads like the in the video, as well as on larger gravel roads intended for civil cars.Very fast, cost effective and more environmentally friendly way to maintain the road.In this target work phases were following.1. In places where the potholes were large and the center of the road was very raised, the center of the road is opened with a grader before milling.2. Milling the road and crushing the largest stones.In places where the pot holes are not that deep work can be started directly with a crusher.3. Pre profiling and compaction of the road.4. Final levelling and profiling of the road.5. Final compaction of the road.6. After the process, it is recommended to let the road dry properly before driving heavy vehicles on it.Equipment used in this video.Tractor Valtra T215 with MeriGrader MGR-420 & MeriPacker MPC-375Tractor Valtra Q305 with MeriCrusher RC65-221 DTGMeriCrusher Different for a ReasonFor more information,mericrusher.com/en/products/meriroad-equipment
MeriTractor MT-700 768hp dedicated tracked tractor walk around video. Suokone Oy 2024-03-25 | MERITRACTORMT-700 the most efficient mechanical power take-off (PTO) crawler tractor on the market. It is efficient, versatile and adaptable. MT-700 Is able to operate under extreme conditions where conventional tractors are no longer effective. MT-700 Is efficient, due to high engine power and the extreme duty mechanical power take-off, the tractor works faster with lower fuel consumption per hectare than any other method.Powerful, large displacement diesel engine produces extreme torque through a wide range of engine rpm. High torque is the most important engine characteristic while crushing. The combination of power and massive torque allows the engine to operate at low rpm. When not pushed to its limit, the average fuel consumption is much lower without compromising efficiency and quality of work.The Suokone manufactured PTO gearbox is designed for safe transmission of high torque. The integrated POC-clutch works as an overload/release clutch. The aptor system switches the PTO to neutral if the defined slippage percentage is exceeded. The POC-clutch protects the entire driveline, from tractor to crushing attachment.Hydrostatic drive makes it possible to adjust driving speed steplessly from 0-18km/hStandard air conditioned, ergonomic cab equipped with 180 degree rotating seat. Steering wheel and controls move with with the seat. Cab may be tilted down, lowering overall transport height for road transport.Double acting, independently controlled lift arms allow for crusher levelling during work. Tilting the attachment is useful when operating the crusher.
MeriRoad crusher RC90-221 DTG PTO stone crusher and soil stabilizer for tractors. Suokone Oy 2024-01-25 | MeriRoad crusher RC90-221 DTG is designed for demanding road and construction professional. RC90-221 DTG is PTO stone crusher and soil stabilizer for tractors. Designed to work in hard condition.-Asphalt recycling-Soil stabilization-Stone crushing-Gravel based road maintenancefor more information.mericrusher.com/en/products/meriroad-equipment
MeriCrusher RC90-221 DTG multitask soil stabilizer for tractors hard at work Suokone Oy 2024-01-24 | MeriCrusher RC90-221 DTG is multitask soil stabilizer for tractors. Designed for the most demanding of projects the MeriRoad RC90 sets new standards for the professional contractor. asphalt recyclingsoil stabilizationstone crushinggravel road maintenanceFor more information!mericrusher.com/en/products/meriroad-equipment
MeriPeat double disc sod peat cutter PK-1S L2 for shallow peat bogs. Suokone Oy 2024-01-20 | MeriPeat sod peat cutter PK-1S L2 is ideal machines for shallow peat bogs.Reguirement of needed peat layer is roughly half compared to standard machine.
MeriCrusher hydraulic mulchers crushing of ice and hard packed snow and adding of traction. Suokone Oy 2024-01-20 | MeriCrusher MC4-series hydraulic mulches are exellent solution for ice and hard packed snow removal from parking areas, side walks, cross roads, park paths and generally in places were traditional big machines can not move easily.MC4-series hydraulic mulchers can be fitted easily to any hydraulic base machines such as skid and compact loaders and excavators.For more information.mericrusher.com/en/products/hydraulic-driven-mulchers
MeriRoad crusher RC90-221 DTG gravel road maintenance Suokone Oy 2023-12-08 | MeriRoad Crusher RC90-221 DTG for gravel road maintenance. The road is crushed and the stabilizer is simultaneously mixed to a depth of about 25 cm.Designed for the most demanding of projects the MeriRoad RC90 sets new standards for the professional contractor. With a high volume rotor chamber, and hydraulically adjustable counter blade, material handling on gravel road crushing, soil stabilization and mixing projects are taken to a new level.A rear hydraulic crushing screen helps produce perfectly sized material. Independently controlled hydraulic side skids allow for easy depth control and lateral rotor tilting to match the soil or road profile.Ideal for high power tractors to 550hp, and working in conditions where Reliability, Durability, Capacity and Versatility are paramount, the MeriRoad RC90 is simply your first choice.Power is transmitted to the rotor through patented Suokone POC safety clutches and dual G-series gear drives.Wear parts protecting the RC90 rotor chamber are bolt-off / bolt-on. Body wear liner and counter blades can be replaced without removing the rotor. Bolt-on components allow for the use of special abrasion resistant materials in the areas with the most need.The large volume rotor and crushing chamber improves material flow, and increases productivity.Modular design and engineering allows for optimal component selection for efficient operation and future upgrades.The UNTH-rotor with Cost Effective 22mm conical carbide tools, and bolt on replaceable holder protection give excellent crushing results.With an 85cm diameter rotor, the MeriRoad RC90 boasts a maximum free cutting depth of 25cm
MeriRoad crusher RC90-221 DTG asphalt recycling and stone crushing Suokone Oy 2023-12-08 | The new Road Crusher RC 90-221 DTG presented at Agritechnica 2023 was tested in several different conditions, and it performed very well💪.Thanks to the new optimized structure and features, the productivity of the machine rises to a whole new level.In the video, it crushes and recycles an 8-12 cm thick layer of asphalt, and crushes big stones.For more information👇mericrusher.com/en/products/meriroad-equipment
MeriRoad Equipment in gravel road maintenance in Finland. Suokone Oy 2023-09-13 | In this video shown gravel road maintenance with MeriROAD equipment.Work phases are following1. Crushing the road with the RC90-221 DTG road crusher to a depth of 10-15 cm. In this way, a maintenance layer free of large stones is obtained on the surface2. Compacting the crushed layer with MeriPacker MPC-375 vibrating plate3. Profiling and levelling of the road with MeriGrader MGR-4204. Final compacting and levelling with MeriPacker For more information!mericrusher.com/en/products/meriroad-equipmentmericrusher.com/en/products/meriroad-equipment
MeriRoad equipment maintaining gravel road with remix method. Suokone Oy 2023-06-26 | In this video shown gravel road remix maintenance with MeriRoad machinery. In this method the existing material in the road and in the road sides is used for making the maintenance layer for the road. No new gravel is made and hauled long distances to the road. This method reduces the carbon footprint.Work steps are following.1. Opening the road with a grader.2. Crushing of the road and the material that is cutted from the road side.3. Compacting of the road.4. Profiling of the road.5. Final compacting of the road.For more information read,mericrusher.com/en/products/rc-6000mericrusher.com/en/products/meripacker-mpc-376
MeriPeat profiler PRF-240 clearing ditch edges Suokone Oy 2023-05-24 | Profilers for shaping peat strips during productionThe PRF-240 profiler has been designed for shaping peat strips during production. It can be used to level raised ditch borders and spread the excess peat evenly across the entire width of the strip. The excess peat can then be collected into the peat stack during normal milled peat production. Using the profiler 2-3 times a season helps keep production strips in optimal condition without any further steps required.The simple and sturdy design of the PRF-240 profiler enables it to be used effectively on both big and small peatlands.Profiler can be specified with a road transportation kit that makes it easy to move from one worksite to another, even using a civil car.The transmission has two T-gears that enable optimal angles for the PTO shaft.More:meripeat.com/en
MeriPeat PRF-240 profiler clearing ditch edges Suokone Oy 2023-05-24 | Profilers for shaping peat strips during productionThe PRF-240 profiler has been designed for shaping peat strips during production. It can be used to level raised ditch borders and spread the excess peat evenly across the entire width of the strip. The excess peat can then be collected into the peat stack during normal milled peat production. Using the profiler 2-3 times a season helps keep production strips in optimal condition without any further steps required.The simple and sturdy design of the PRF-240 profiler enables it to be used effectively on both big and small peatlands.Profilers can be specified with a road transportation kit that makes it easy to move from one worksite to another, even using a civil car.The transmission has two T-gears that enable optimal angles for the PTO shaft.read more:meripeat.com/en
MeriCrusher MJHS-311 DTG maintaining horse race track. Suokone Oy 2023-04-24 | Maintaining of the horse race track is done with the help of MeriCrusher MJHS-311 DTG. Over the years the top layer of the track compacts and hardens almost as solid as concrete, not allowing the water going through of it. MeriCrusher is used to crush and soften this hardened layer of the race track, to give it more life time. Working depth of the crusher ca be adjusted steplesly from 0-30cm.Work phases as follows.1. Watering and moisturizing the race track2. Crush and soften the required layer with the MeriCrusher3. Levelling and profiling the race track back into the shape with gradermore information👇https://www.mericrusher.com/en/produc...
MeriTractor MT-700 tracked carrier with forestry mulcher MJHS-311 DTX clearing harvesting left overs Suokone Oy 2023-03-06 | MeriTractor MT-700 and MeriCrusher MJHS-311 DTX clearing harvesting left overs before replanting. MT-700 is dedicated tracked carrier having almost 800hp. All the power can be driven mechanically to mulcher head through power take-off (PTO). MeriCrusher forestry mulcher head is equipped with patented sizing screen. Mulcher head can work deep in the ground, with out compromising the crushing result on top soil.MeriCrusher different for a reason!Read more,mericrusher.com/en/products/meritractor-mt-700
Maintenance of gravel road with MeriCrusher and MeriPacker and tractor mounted grader Suokone Oy 2022-11-09 | In this video shown maintenance of gravel road with MeriCrusher method. All the work phases are done with 1 tractor and 1 operator. Idea is to maintain the surface of the road and crush the stones smaller in size and create 8-15 big stone free maintenance layer to the road so that annual maintenance with graders is easier.Benefits of this method are following:- Cost saving It all can be done by one normal size 220-300hp tractor. - It fixes the holes in the road properly, because the crushing is done deeper than the bottom of the holes.-Annual maintaining with grader is faster and giving better result because needed maintenance layer is in the road.- It saves environment no need to crush and gravel and transport it long distances on the road.Work phases in the video.1. Opening of the road and crushing of the stones with MeriCrusher to a depth 8-15cm2. Compacting of the road with MeriPacker vibrating plate.3. Leveling and straightening of the road with tractor mounted grader.4. Final compacting of the road surface with MeriPacker.more info!https://www.mericrusher.com/en/produc...
Gravel road maintenance with MeriCrusher and MeriPacker and tractor mounted grader plate. Suokone Oy 2022-11-08 | In this video shown maintenance of gravel road with MeriCrusher method. All the work phases are done with 1 tractor and 1 operator. Idea is to maintain the surface of the road and crush the stones smaller in size and create 8-15 big stone free maintenance layer to the road so that annual maintenance with graders is easier.Benefits of this method are following:- Cost saving It all can be done by one normal size 220-300hp tractor. - It fixes the holes in the road properly, because the crushing is done deeper than the bottom of the holes.-Annual maintaining with grader is faster and giving better result because needed maintenance layer is in the road.- It saves environment no need to crush and gravel and transport it long distances on the road.Work phases in the video.1. Opening of the road and crushing of the stones with MeriCrusher to a depth 8-15cm2. Compacting of the road with MeriPacker vibrating plate.3. Leveling and straightening of the road with tractor mounted grader.4. Final compacting of the road surface with MeriPacker.more info!https://www.mericrusher.com/en/produc...
Deep maintenance of gravel road with MeriCrusher Suokone Oy 2022-11-06 | Soratien rungon peruskunnostus ja rungon lujitus sideaineita käyttäen.Deep maintenance of the gravel road using binders that strengthens the body of the road.1. Tienpinta aukaistaan kaivinkoneen haralla ja suurimmat kiven lohkareet nostetaan syrjään.1. The surface of the road is opened with a rake and the largest stones are removed 2 .Tie jyrsitään 25-30cm syvyyteen ja jäljelle jääneet kivet murskataan MeriRoad RC65-221 DTG murskaimella. 2.The road is crushed to a depth of 25-30cm and the remaining stones are crushed with MeriRoad crusher RC65-221 DTG 3. Sidesaineiden levitys 3.Spreading of the binders 4. Sideaineiden ja sorakerroksen stabilointi ja sekoitus jyrsimellä 4.Stabilization and mixing of binders and gravel layer with a crusher. 5. Karkea tien profilointi ja tasaus traktorin alaterällä 5. Rough profiling and leveling of the road with tractor mounted grader plate 6.Tarvittaessa tie voidaan kastella ennen tiivistystä ja ojanlaidat siistiä kaivinkoneella 6.If necessary, the road can be watered before compaction. Sides of the roads can be cleaned with excavator. 7. Tien tiivistys traktorikäyttöisellä MeriPacker tärylevyllä. 7. Compacting of the road with tractor mounted vibrating plate. For more infromation of the crusher https://www.mericrusher.com/en/produc...
Forestry tiller MeriCrusher MJH-0.8 DT for clearing and making planting furrow. Suokone Oy 2022-09-15 | Foresty tiller and stump crusher. MeriCrusher MJH-0.8 DT is ideal for crushing stumps and clearing planting furrow after harvesting before re planting. FOREST / ORCHARD- Crushing of stumps and roots- Crushing of planting rows- Soil preparing for planting-Rotor diameter 60cm-Rotor width 80cm-Max working depth 30cm-Free cutting depth 16cm.-Power range 70-150hp-Weigth 1200kg- Side transmission with chain.-Transmission protected with Suokone patented POC-safety clutches More!mericrusher.com/en
MeriPeat machines, for sod clearing and maintaining for milled and sod peat production. Suokone Oy 2022-08-25 | ...
MeriPeat ditcher OJK-1.3 clearing ditches for horticultural peat production area. Suokone Oy 2022-08-23 | Nice video about the seamless collaboration between MeriPeat OJK-1.3 and Valtra to clear the ditches for horticultural peat production area. Full depth of the ditch (1,3m) can be achieved by one pass.more:meripeat.com/en
Sod peat production with MeriPeat PK-1S L - R12 sod peat cutter Suokone Oy 2022-08-12 | The sod peat production machines developed and manufactured by Suokone have become industry favourites around the world. The success of these products is based on their effectiveness, reliability and availability of spare parts. MERIPEAT peat machinery has been developed over decades on the basis of customer feedback and experiences. MERIPEAT sod peat machinery produces clean and high-quality sod peat.More info:meripeat.com/en/products/sod-peat-productionVideo taken by: youtube.com/c/Landtech13
MeriPeat production miller PM-9.0 in peat production Suokone Oy 2022-08-12 | MERIPEAT production millers are suitable for both large-scale and small-scale production of milled peat. The three-element construction helps keep fields level throughout the production period. The design also eliminates the need for separate bearings between elements. The transmission is mechanical, and the middle element houses transmissions at each end. These can be either chain transmissions or gear boxes, enabling the use of high-powered tractors even in extreme conditions. The cutters have been manufactured from superior quality abrasion-resistant steel. Production millers attach to the tractor’s 3-point linkage (ridger model) or tow hook towable.more info.meripeat.com/en/products/milled-peat-production
Peat harvesting with MeriPeat super loader HK-16.5 and TRL-30 F peat trailers. Suokone Oy 2022-08-12 | What a nice video of Suokone manufactured MeriPeat equipment in action. In the video Super loader HK-16.5 is loading horticultural peat to TRL-30 F trailers.Video taken by: youtube.com/c/Landtech13
Forestry mulcher and tiller MeriCrusher MJHS-241 STX clearing land and reclaiming soil Suokone Oy 2022-08-12 | MeriCrusher MJHS-241 STX clearing soil after harvesting before replanting. This machine has custom made power frame made by our importer #martensIquipment MeriCrusher can be equipped with patenting sizing screen to get very fine mulching result with low rotor speed machine designed to work effectively 30-35cm below the ground as shown in the video.More: mericrusher.com
MeriCrusher MJ- serie forestry tiller and mulcher for universal land and forestry clearing. Suokone Oy 2022-04-27 | MeriCrusher MJ forestry mulcher and forestry tiller for versatile land clearing and soil reclamation workUsed with small PTO-driven urban and agricultural tractors of different sizes, the MeriCrusher MJ is Versatile and Efficient. Mulcher is suitable for crushing stumps, leftover logging debris and general forestry and land clearing and soil reclamation work to a maximum working depth of 8" (200mm). Also used for general summer and winter maintenance of gravel roads. Suitable for crushing ice on roads and sidewalks to level the surface and improve traction.Mulcher for versatile usePTO-driven mulcher and forestry tiller for versatile crushing, the MeriCrusher MJ is your first choice. Light, strong construction makes the MJ series ideal for a wide power range of tractors, to 150 hp. Working in conditions where light weight and durability are paramount, the MeriCrusher MJ gives excellent crushing results. Power is transmitted to the rotor through single or dual double chain drives and always protected by an over load clutch, of either friction disc, or patented POC (pressure operated safety clutch) type, designed by Suokone.more:mericrusher.com/en/products/mericrusher-mj
MeriCrusher MC4 & MC5 forestry tiller and mulcher working in various condition. Suokone Oy 2022-04-19 | In video shown MeriCrusher hydraulic forestry mulchers and forestry tillers in different jobs. Mounted to several type of compact and tracked loaders and excavators.Read More!mericrusher.com/en
MeriCrusher MJS-G serie forestry tiller and mulcher for universal forestry and land clearing. Suokone Oy 2022-03-24 | MJS forestry mulchers and forestry tillers for land clearing contractorsWell suited for forestry clearing, farm land clearing, soil reclamation, crushing stumps, clearing construction and development sites, clearing and cleanup after harvest, and other demanding works. The MeriCrusher MJS PTO-diven mulcher has a 10" (250mm) maximum subsoil working depth. With a wide power range, and either triple row chain drive (MJS/C), or field proven Suokone gear drive (MJS/G), the MeriCrusher MJS forestry mulcher is the first choice for contractors. Modular design and construction allow for continual advancement and allows you to easily add additional components.
MeriCrusher MJ-1.8 ST forestry mulcher and tiller working in green house. Suokone Oy 2022-03-22 | What a nice video of MeriCrusher MJ-1.8 ST forestry mulcher working in green house in Holland.In this video MeriCrusher is reclaiming the base soil of the green house. Over the time soil gets very hard in the green houses because of the high temperature and dry conditions. Soil gets uneven and it needs to be softened and levelled every ones in a while. The condition is very rough and hard to do with traditional soil tillers. Also in the video shown crushing of stumps on the yard of the green houses. What a multipurpose machine I`d say.Different for a reason!mericrusher.com/en/products/mericrusher-mj
MeriCrusher MJHS forestry tiller and forestry mulcher for demanding land clearing professional Suokone Oy 2022-02-08 | MJHS forestry tiller and mulcher for heavy duty land and forestry clearingDesigned for medium and large tractors up to 750hp, the MeriCrusher MJHS mulcher is engineered for heavy duty forestry and land clearing where Effectiveness and Durability are paramount. With a subsoil working depth of 14"(350mm), MJH/G series are equipped with dual G series gear transmissions, while MJH/X series feature single or dual X-series gear transmission. Modular design and engineering allow for optimal selection of components for efficient operation, and future upgrades.MeriCrusher unique features!-Low operating costs-20-40% Lower fuel consumption-Deeper subsoiling with low speed and high torque rotor-Reliable gear transmission solutions up to 700hp-Unique Patented POC- safety clutch-Clutch solution which can withstand heat and high torques-Patented sizing screen-One machine for above and below the ground clearing-Modular structure and smart design-Wide range of working widths up to 3.5 meters wide-Light weight and strong structure-Ideal solutions for multiple applicationsmore:mericrusher.com/en/products/mericrusher-mjh
MeriCrusher MJ-2.3 ST forestry tiller and mulcher crushing of stumps and harvesting left overs Suokone Oy 2021-11-24 | MeriCrusher MJ forestry mulcher and forestry tiller for versatile land clearing and soil reclamation workUsed with small PTO-driven urban and agricultural tractors of different sizes, the MeriCrusher MJ is Versatile and Efficient. Mulcher is suitable for crushing stumps, leftover logging debris and general forestry and land clearing and soil reclamation work to a maximum working depth of 8" (200mm). Also used for general summer and winter maintenance of gravel roads. Suitable for crushing ice on roads and sidewalks to level the surface and improve traction.More!mericrusher.com/en/products/mericrusher-mj
MeriCrusher MC5-190 hydraulic forestry mulcher & tiller introducing video! Suokone Oy 2021-11-24 | MeriCrusher MC5 -Hydraulic forestry mulcher and tillerMeriCrusher MC5 hydraulic forestry tiller for versatile forestry and land clearing work Used with a wide range of large scale compact, track and skid loaders. The MeriCrusher MC5 hydraulic shows its versatility crushing forest residue, clearing land for site development, maintaining gravel roads, removing stumps and roots, to a maximum working depth of 10" (250mm). Modular bolted design allows for easy attachment of accessories depending on the job that needs to be done. And makes the future upgrades possible.More!mericrusher.com/en
Meri milled peat machine producing horticultural peat in Sakhalin. Suokone Oy 2021-11-04 | In this video Meri milled peat machinery working in Sakhalin producing horticultural peat.Functional and reliable machinery for all stages of peat productionDesigned and manufactured in Finland, MeriPeat products have been refined over time according to customer wishes in order to offer them peat production machinery that is both durable and efficient. Special attention in the development of the machinery has been given to the harsh working conditions that are typical in the peat production industry, as well as the short but intensive period when the machines are expected to perform around the clock on almost every continent.Suokone has developed together with customers functional and powerful machinery for all stages of milled peat production, including millers, harrowers, ridgers, loaders and trailers. The design and quality of all our products is based on decades of experience with peat machinery: these machines are long-lasting and effectively produce high-quality peat – from one day to the next!Production millers are suitable for both large-scale and small-scale production of milled peat.Spoon-type harrowers turn the peat to facilitate drying and are suitable for both single- and multi-harvest methods.Milled peat ridgers are used to form swathes of dry milled peat effectively and precisely before harvesting.V-type milled peat ridgers are used to gather the milled peat into piles or directly into the trailer.Milled peat loaders are used to load the milled peat into the trailer using a belt conveyor. Our loaders are lightweight and compact but also durable.Peat trailers are suitable for transporting both sod peat and milled peat. Our peat trailers feature eight bogie wheels and a side-tilting skip.Mechanical harvesters are used to collect the milled peat from the windrows and transport it to the stock pile with low fuel consumption.Profilers are used to maintain an optimal profile along the production strip throughout the summer. The excess peat from the sides of ditches is spread evenly across the entire width of the strip and can then be collected into the peat stack during normal milled peat production.More!meripeat.com/en/products/milled-peat-production
MeriCrusher MC4-180 hydraulic forestry tiller clearing vegetation and maintaining side of the road Suokone Oy 2021-10-05 | In this video MeriCrusher MC4-180 & MeriRotator is mounted to 14 ton Volvo excavator. Combination is clearing road sides from the undergrowth und vegetation. Mulching is done 10-15cm below the ground. When mulching is done so that the roots of the vegetation are crushed. Vegetation regrowth occurs much less.Mulcher for versatile useMC4 series MeriCrushers with direct drive hydraulic are designed for versatile mulching work. Hydraulic motor is straightly connected to the rotor which makes the construction simple and keeps the weight low. MC4 is ideal for excavators 10 – 25 metric ton. Working in conditions where light weight and durability are paramount, the MeriCrusher MC4 hydraulic gives excellent crushing results from the STD and STE rotor equipped with cost effective carbide cutters. Combinatation of rotors high torque and low weight ensures the rotors minimal recovery time. Thanks to low cuting speed working close to buildings and traffic is safe and harmless, compared to working with high speed mulchers. Direct drive motor enables the rotating of the rotor to both directions.STD-rotor with Cost Effective conical carbide cutters for less abrasive, but demanding conditions.STE-rotor with Cost Effective carbide cutters. Either new type of non rotating or conical cutters for more abrasive and demanding conditions. STE-enables wider range of cutter options.Meri RotatorRotator allows the operator to place the crusher in the desired working position. Safe, and versatile positioning reduces carrier movement and makes the working more efficient. Using the rotator, work can be accomplished while swinging the boom or moving the boom normally. Work is possible in narrower, confined environments, where the use of a fixed mounted crusher would be impossible or much more difficult.Rotary coupler large five channel coupler with 1" hose connections ensures unobstructed oil flow to the motor.360 degree continous rotation with no expoced hydraulic hosesFind this and more:https://www.mericrusher.com/en/produc...
New MeriCrusher MJS-244 STG forestry tiller introduction video Suokone Oy 2021-09-23 | NEW! Versatile forestry tiller and mulcher with outstanding improved features for demanding contractingWhen work conditions are tough and demanding, look no further than the new MeriCrusher MJS/G series, where extreme wear is taken into account. Ideal for tractors from 130hp up to 300hp and working in conditions where Reliability and Durability are paramount. Transmission line is continuously protected by the Patented Suokone POC- safety clutch, power is transmitted to the rotor through one or two G-series gear transmissions. The MeriCrusher MJS/G can safely work with medium size tractors up to 300hp, yet remains light in weight, and Durable. In new MJS/G series the wear parts around the rotor chamber are designed to be bolt on, body wear liner, counter blades side gearbox guards etc. Bolt on attachments allows the use of special wear materials in places where it is most needed. The optimized shape of rotor chamber improves the material flow and increases productivity. Modular design and engineering allows for optimal selection of components for efficient operation, and future upgrades. The UNT rotor, with Cost Effective carbide cutters and Extra Durable forged holders give a fine crushing result. The MeriCrusher MJS/G mulcher can be equipped with with a door type of sizing screen for even finer crushing result. The MeriCrusher MJS/G mulcher gives extremely fine mulch in all conditions and allows you to work deep in the ground up to 25-30cm.UNT-rotor with Cost Effective carbide cutters and extra durable, forged cutter holders for demanding conditions.Multiple cutter options availablemore:mericrusher.com/en/products/mericrusher-mjs
MeriCrusher MJS-244 STG forestry tiller and mulcher clearing new farmland Suokone Oy 2021-09-23 | NEW! Versatile forestry tiller and mulcher with outstanding improved features for demanding contractingWhen work conditions are tough and demanding, look no further than the new MeriCrusher MJS/G series, where extreme wear is taken into account. Ideal for tractors from 130hp up to 300hp and working in conditions where Reliability and Durability are paramount. Transmission line is continuously protected by the Patented Suokone POC- safety clutch, power is transmitted to the rotor through one or two G-series gear transmissions. The MeriCrusher MJS/G can safely work with medium size tractors up to 300hp, yet remains light in weight, and Durable. In new MJS/G series the wear parts around the rotor chamber are designed to be bolt on, body wear liner, counter blades side gearbox guards etc. Bolt on attachments allows the use of special wear materials in places where it is most needed. The optimized shape of rotor chamber improves the material flow and increases productivity. Modular design and engineering allows for optimal selection of components for efficient operation, and future upgrades. The UNT rotor, with Cost Effective carbide cutters and Extra Durable forged holders give a fine crushing result. The MeriCrusher MJS/G mulcher can be equipped with with a door type of sizing screen for even finer crushing result. The MeriCrusher MJS/G mulcher gives extremely fine mulch in all conditions and allows you to work deep in the ground up to 25-30cm.UNT-rotor with Cost Effective carbide cutters and extra durable, forged cutter holders for demanding conditions.Multiple cutter options availablemore:mericrusher.com/en/products/mericrusher-mjs
MeriRoad and stone crusher RC65-221 DTG, crushing of stones and maintaining forest road. Suokone Oy 2021-08-03 | PTO-Driven stone and road crusher RC65-221 DTG. Is versatile multitask stone and road crusher it can be also used for forestry and agricultural work. It can mulch and crush stumps, harvesting leftovers and undergrowth up to 35cm below the ground. In this video it is used for lime stone crushing and maintaining of forest road.MeriRoad RC65 crushers are designed for demanding projects and professional contracting where extreme wear is taken into account. Ideal for medium and high power tractors up to 400hp, and working in conditions where Reliability and Durability are paramount, the MeriRoad RC65 series is your first choice. Power is transmitted to the rotor through Patented Suokone POC safety clutches and dual G-series gear transmissions. In RC65 the wear parts around the rotor chamber are designed to be bolt on, body wear liner, counter blades side gearbox guards etc. Bolt on attachments allows the use of special wear materials in places where it is most needed. The optimized shape of rotor chamber improves the material flow and increases productivity. Modular design and engineering allows for optimal selection of components for efficient operation, and future upgrades. UNTH-rotor with Cost Effective conical carbide cutters gives excellent crushing and mixing result. UNTH-rotor with 650mm rotating diameter gives maximal free cutting depth 15cm.- Crushing the ground before stabilizing.- Preparing the subsoil for laying sett (car parks, roads, residential areas).- Recycling of old asphalt and gravel roads.- Stabilization of grounds down to a depth of 35 cm on all types of roads, with easily accessible materials like cement, polimers, ash, dolomite, lime.- Maintaining and redoing of forest, communal and agricultural roads.- Building outdoor feed pads.- Stump removalmore:mericrusher.com/en/products/rc-6000
Forestry mulcher MeriCrusher MC4-180 clearing road sides from the vegetation Suokone Oy 2021-06-21 | In this video MeriCrusher MC4-180 & MeriRotator is mounted to 14 ton Volvo excavator. Combination is clearing road sides from the undergrowth und vegetation. Mulching is done 10-15cm below the ground. When mulching is done so that the roots of the vegetation are crushed. Vegetation regrowth occurs much less.Mulcher for versatile useMC4 series MeriCrushers with direct drive hydraulic are designed for versatile mulching work. Hydraulic motor is straightly connected to the rotor which makes the construction simple and keeps the weight low. MC4 is ideal for excavators 10 – 25 metric ton. Working in conditions where light weight and durability are paramount, the MeriCrusher MC4 hydraulic gives excellent crushing results from the STD and STE rotor equipped with cost effective carbide cutters. Combinatation of rotors high torque and low weight ensures the rotors minimal recovery time. Thanks to low cuting speed working close to buildings and traffic is safe and harmless, compared to working with high speed mulchers. Direct drive motor enables the rotating of the rotor to both directions.STD-rotor with Cost Effective conical carbide cutters for less abrasive, but demanding conditions.STE-rotor with Cost Effective carbide cutters. Either new type of non rotating or conical cutters for more abrasive and demanding conditions. STE-enables wider range of cutter options.Meri RotatorRotator allows the operator to place the crusher in the desired working position. Safe, and versatile positioning reduces carrier movement and makes the working more efficient. Using the rotator, work can be accomplished while swinging the boom or moving the boom normally. Work is possible in narrower, confined environments, where the use of a fixed mounted crusher would be impossible or much more difficult.Rotary coupler large five channel coupler with 1" hose connections ensures unobstructed oil flow to the motor.360 degree continous rotation with no expoced hydraulic hosesFind this and more:mericrusher.com/en/products/hydraulic-driven-mulchers/mericrusher-mc4-hydraulic-for-excavators
MeriCrusher transmission and patented POC-safety clutch introduction video Suokone Oy 2021-05-19 | In this video is demonstrated how the secondary transmission line of the MeriCrushers are built.Demonstrated how the Suokone Patented POC-safety clutch is adjusted matching the tractors power and showed how does it work in practice.Reliable transmission solutions for wide power range from 50 to 768 horsepower- Unique Patented POC-safety clutch- Clutch solution which can withstand heat and high torques- Reliable gear transmissions up to 768hp- In house design and manufacturing- No need for oil coolers- Electric slip alarmsmore: mericrusher.com/en/why-to-choose-mericrusher
Forestry mulcher and tiller MeriCrusher MC4-140 tilling soil and mulching vegetation. Suokone Oy 2021-04-27 | In this video forestry mulcher and soil tiller MeriCrusher MC4-140 and Terex Skidsteer mulching vegetation and tilling soil.MeriCrusher MC4 hydraulic mulcher for versatile forestry and land clearing workUsed with a wide range of compact, track and skid loaders. The MeriCrusher MC4 hydraulic shows its versatility crushing forest residue, clearing land for site development, maintaining gravel roads, crushing ice, removing stumps and roots, to a maximum working depth of 8" (200mm). Modular bolted design allows for easy attachment of accessories depending on the job that needs to be done. And makes the future upgrades possible.Typical working environmentsFORESTCrushing of harvesting leftoversPreparing of hauling linesSoil preparing for plantingMaintenance of forest roadsClearing of vegetation and undergrowthCONSTRUCTIONClearing of building sitesCrushing of stumpsIce crushingClearing land before seeding and plantingClearing of power linesClearing of firebreaksAGRICULTUREClearing of farm landReclaiming soil for farmingOrchard clearingFarm road maintenancemore:mericrusher.com/en/products/hydraulic-driven-mulchers/mericrusher-mc4-hydraulic
MeriPeat all you need for peat. Suokone Oy 2021-04-12 | Functional and reliable machinery for all stages of peat productionDesigned and manufactured in Finland, MeriPeat products have been refined over time according to customer wishes in order to offer them peat production machinery that is both durable and efficient. Special attention in the development of the machinery has been given to the harsh working conditions that are typical in the peat production industry, as well as the short but intensive period when the machines are expected to perform around the clock on almost every continent.Bog Clearing and MaintainingSod Peat ProductionMilled Peat Productionmore:meripeat.com/en
MeriCrusher Forestry mulcher MJHS- Seria for tractors 200-700hp Suokone Oy 2021-02-18 | MeriCrusher MJHS for tractors 200 – 700hp, working widths 2.4 - 3.1 - 3.5 meters working depth 30-35cm below the ground.MeriCrusher MJHS mulcher is ideal for medium and large tractors up to 700hp, the MeriCrusher MJHS mulcher is engineered for heavy duty forestry and land clearing where Effectiveness and Durability are paramount. With a subsoil working depth of 12-14"(30-35cm), Modular design and engineering allow for optimal selection of components for efficient operation, and future upgrades.With the latest crushing technology, MeriCrusher MJHS- rotating sizing screen serie mulchers are engineered for the most demanding of professionals, and projects. For the MJHS all the transmission options are available. DTG / STX for 200-400hp tractors and DTX for tractors up to 700hp. Suokone designed and made gear transmission, are always protected by the Patented Suokone POC safety clutch, full power transfer is assured. In MJHS-mulchers the wear parts around the rotor chamber are designed to be bolt on, body wear liner, counter blades, side gearbox guards etc. Bolt on attachments allows the use of special wear materials in places where it is most needed. The optimized shape of rotor chamber improves the material flow and increases productivity. With several rotor options, and patented rotating sizing screen, the MeriCrusher MJHS mulcher gives extremely fine results in all conditions and allows you to work deep in the soil.More: mericrusher.com
Clearing new peat production are MJK-350 DT & Valtra T234 in Rwanda Suokone Oy 2021-02-03 | In this video MeriPeat MJK-350 DT & Valtra T234 clearing new peat production are in Rwanda.The bog clearing and maintaining machines developed and manufactured by Finnish company Suokone. Machinery is ideal for both clearing new peat production areas and reconditioning existing ones. The same machinery can also be used to clear new farm land on peat land.MJK preparing millers are designed for clearing new peat production areas and annual maintaining of existing strips. The rotor is equipped with knife cutters that efficiently cut through any trees or stumps in the bog. Preparing millers are also ideal for transforming peatland into farm land.Features:The hydraulic rear roller compresses the milled peat when driving in the forward direction. When driving in reverse, it can be used to knock over and compress trees and shrubs against the ground. The rear roller also supports the machine, reducing the surface pressure of the tractor-implement combination.The POC-3000 safety clutch effectively protects the transmission against excessive loads that can occur frequently when facing stones, for example.More: https://www.suokone.comMore: meripeat.com
Forestry mulcher MeriCrusher MJ-1.8 ST & Mahindra tractor crushing of stumps after harvesting. Suokone Oy 2021-01-28 | MeriCrusher MJ-1.8 ST PTO-driven forestry mulcher & Mahindra tractor. Forestry clearing and stump crushing after harvesting. MeriCrusher MJ-1.8 mulcher can subsoil up to 20cm. Mulcher for versatile use Designed for versatile crushing, the MeriCrusher MJ is your first choice. Light, strong construction makes the MJ series ideal for a wide power range of tractors, to 150 hp. Working in conditions where light weight and durability are paramount, the MeriCrusher MJ gives excellent crushing results. Power is transmitted to the rotor through single or dual double chain drives and always protected by an over load clutch, of either friction disc, or patented POC (pressure operated safety clutch) type, designed by Suokone. STD-rotor with Cost Effective conical carbide cutters for less abrasive, but demanding conditions. STE-rotor with Cost Effective carbide cutters. Either new type of non rotating or conical cutters for more abrasive and demanding conditions. More: mericrusher.com
MeriCrusher MC4 140 hydraulic mulcher & Terex SkidSteer crushing of asphalt and maintaining of road Suokone Oy 2021-01-28 | In this video MeriCrusher MC4-140 hydraulic mulcher & Terex skidsteer crushing of asphalt. Worn layer of the asphalt is crushed to make it level and then new asphalt is added on.MeriCrusher MC4 hydraulic mulcher for versatile forestry and land clearing work Used with a wide range of compact, track and skid loaders,also well suitable for excavators, the MeriCrusher MC4 hydraulic shows its versatility crushing forest residue, clearing land for site development, maintaining gravel roads, crushing ice, removing stumps and roots, to a maximum working depth of 8" (200mm). Modular bolted design allows for easy attachment of accessories depending on the job that needs to be done. And makes the future upgrades possible. Find this and more: mericrusher.com
MeriCrusher MC4-140 Hydraulic mulcher&Terex skidsteer crushing ice to improve the traction Suokone Oy 2021-01-28 | MeriCrusher MC4-140 Small hydraulic crusher making roads and intersections safe for all. The MC4 is able to easily crush ice, and work "just a bit" into the gravel road surface. The crushed ice, when mixed with the crushed rock from the road surface provides for much safer driving and lower stopping distances. Hills that were once treacherous are now safe. Material is crushed a safe manner, allowing the road to remain open, and traffic to continue flowing.More: mericrusher.com
Direct drive hydraulic Mulcher MeriCrusher MC4-180&Rotator clearing ditch edges with the excavator Suokone Oy 2021-01-18 | In this video MeriCrusher MC4-180 & MeriRotator is mounted to 14 ton Volvo excavator. Combination is clearing ditch edges from the undergrowth. Mulching is done 10-15cm below the ground. When mulching is done so that the roots of the vegetation are crushed. Vegetation regrowth occurs much less.Mulcher for versatile useMC4 series MeriCrushers with direct drive hydraulic are designed for versatile mulching work. Hydraulic motor is straightly connected to the rotor which makes the construction simple and keeps the weight low. MC4 is ideal for excavators 10 – 25 metric ton. Working in conditions where light weight and durability are paramount, the MeriCrusher MC4 hydraulic gives excellent crushing results from the STD and STE rotor equipped with cost effective carbide cutters. Combinatation of rotors high torque and low weight ensures the rotors minimal recovery time. Thanks to low cuting speed working close to buildings and traffic is safe and harmless, compared to working with high speed mulchers. Direct drive motor enables the rotating of the rotor to both directions.STD-rotor with Cost Effective conical carbide cutters for less abrasive, but demanding conditions.STE-rotor with Cost Effective carbide cutters. Either new type of non rotating or conical cutters for more abrasive and demanding conditions. STE-enables wider range of cutter options.Meri RotatorRotator allows the operator to place the crusher in the desired working position. Safe, and versatile positioning reduces carrier movement and makes the working more efficient. Using the rotator, work can be accomplished while swinging the boom or moving the boom normally. Work is possible in narrower, confined environments, where the use of a fixed mounted crusher would be impossible or much more diffigult.Rotary coupler large five channel coupler with 1" hose connections ensures unobstructed oil flow to the motor.360 degree continous rotation with no expoced hydraulic hosesFind this and more:mericrusher.com
MeriRotator for MC4-Hydraulic mulchers for excavators 10-25 metric ton. Suokone Oy 2021-01-17 | Meri Rotator suitable for excavator 10-25 metric ton.Rotator allows the operator to place the mulcher in the desired working position. Safe, and versatile positioning reduces carrier movement and makes the working more efficient. Using the rotator, work can be accomplished while swinging the boom or moving the boom normally. Work is possible in narrower, confined environments, where the use of a fixed mounted crusher would be impossible or much more difficult.Rotary coupler large five channel coupler with 1" hose connections ensures unobstructed oil flow to the motor.360 degree continous rotation with no expoced hydraulic hoses.Find this and more:mericrusher.com
MeriTractor MT-700 & MeriCrusher MJHS-311 DTX in Land Clearing Suokone Oy 2020-11-26 | In this video MeriTractor MT7-700 & MeriCrusher MJHS-311 DTX is clearing land after harvesting and before replanting. Top soil, stumps and harvesting leftovers are crushed and mulched before replanting of forest.MERITRACTOR MT-700Equipped with mechanical power take-off, the MT-700 is the most efficient crawler tractor on the market. The MT-700 is able to operate under conditions where conventional tractors lose power and traction. Thanks to adequate engine power, and a mechanical power take off, the MT-700 enables quicker, more efficient operation, at a lower cost per hectare.Mulcher for projects requiring finely screened materialMeriCrusher MJHS mulcher is ideal for medium and large tractors up to 750hp, with the latest crushing technology, MeriCrusher MJHS ROTO-SCREEN series mulchers are engineered for the most demanding of professionals, and projects. For the MJHS all the transmission options are available. DTG / STX for 200-400hp tractors and DTX for tractors up to 750hp. Suokone made gear transmission, are always protected by the Patented Suokone POC safety clutch, full power transfer is assured. With several rotor options, and rotating screen, the MeriCrusher MJHS mulcher gives extremely fine results in all conditions.More: https://www.mericrusher.com/en/produc...
