Derek Moore
Arcade Classics! Golden Tee Golf
updated
drive.google.com/file/d/1Oob48mLMq3NVHvVxydaEQnOWzHLHf8KL/view?usp=sharing
You can get games, bios, and chd files from website shown in video: archive.org/details/mame-merged
Link to my entire Mame 0.254 folder completely setup with everything but games (for legal purposes) It's about 1.5GB in total with my mame.ini, raster.ini, HLSL settings, my Bezels, and my Snaps already setup inside and ready to go! No work shown in the video required. Just add games to the Roms folder and that's it, no additional steps required: drive.google.com/file/d/1A1br0prsOVNfN5GkU_7LEQE8vZJPmKzb/view?usp=sharing
And here's one of my snap folders, it's not perfect because I never bothered to concentrate too much on snaps, and it's only for like 50 games or so, but if you want it you can grab it: drive.google.com/file/d/1Q75ekzslO6Cc5baQgpVtoNOIE0ZeNm-H/view?usp=sharing
mame.ini version 0.234 (Port Audio): drive.google.com/file/d/1uh6xmZ-54Mta_aGum0XlXwirXnEol8Ga/view?usp=sharing
mame.ini version 0.234 (Compatible, Default Audio): drive.google.com/file/d/1MqUggBXJG9_dT7KLBoqDwFPTeE2clX8c/view?usp=sharing
Derek's Sharp 2023, my favorite HLSL when I want a crisp, clear screen:
drive.google.com/file/d/1uC3aY9OBNIh2jiwBOLz5ENg0Fo6iOtGS/view?usp=sharing
Derek's 'Lottes-Like' HLSL: (My Daily Use - Favorite, some distortion but at least you get screen curvature and scanlines, and you can't see distortion at normal viewing distances anyways, looks so much like Lottes and is the best all-arounder you're gonna get in HLSL): drive.google.com/file/d/1fTkzArlfrGvx3b7_gDOlj9I-oXatCZLP/view?usp=sharing
Derek's 'Lottes-Like' HLSL Flat (No shadowmask distortion up close!, Screen curvature distorts shadow-masks in HLSL unfortunately): drive.google.com/file/d/1CYWEa3-x-GDyOQVjN35EevSDFiklr9n0/view?usp=sharing
(Must Zoom in if you want to see the accurate Shadow-mask effects on these below, they're all flat without Curvature or Scanlines for maximum Shadow-mask/Slot-mask/Aperture-Grille faithfulness):
Derek's Perfect Triad Dot-mask in HLSL: drive.google.com/file/d/1hIlu78Wuc66P774D2L0FSNZS--DKEYdO/view?usp=sharing
Derek's Perfect Slot-mask in HLSL: drive.google.com/file/d/1YRMkbOoOMJDu8vSehHTu_tRyy8WPsu2F/view?usp=sharing
Derek's Perfect Aperture-Grille (Trinitron) in HLSL: drive.google.com/file/d/1GEm8mAosjpzXr0abtxcKBRzqEFUg7KcA/view?usp=sharing
Save your money and go with the underdogs.
If you want my setups for any of these cars, just ask.
Follow the link, you should see a download button near the top I think. After you've got the compressed file, extract it and then just drag the default.xex file into the xenia.exe to start the game. Enjoy!
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Mario Kart 64 folder and select the MarioKart64.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1XG4B3jYcTRpCoD2Z9owEphOSzk-OhZMZ/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the StarFox64 folder and select the StarFox64.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1YNnNN2-ksmq97wJ5xIOGTvI2XlbRv-fC/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Wave Race 64 folder and select the WaveRace64.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1-UCG09XhDhrPAo2ouQaAYlD27W3R8EvI/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Rogue Squadron folder and select the RogueSquadron.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1nI2SvRg1y_lSXsDYG53H_UQt_2_tM7UO/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Goldeneye folder and select the Goldeneye.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/19t8BtBTuvJuP2HrRyecEw2ambJrmDYG2/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Shadows of the Empire folder and select the Shadows_of_the_Empire.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1OX3i5s7HCnEna28U4NQABuk1z70tX3VV/view?usp=sharing
For N64 emulation in Retroarch, the Core I'm using at the moment is: mupen64plus_next_libretro.dll
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Super Mario Kart folder and select the MarioKart.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1g-lp3Y-xGRGD3lHj4Dpypsgk5_FCL0xY/view?usp=sharing
If you want my Retroarch SNES shader preset, follow the link then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your shaders folder in Retroarch. Then after you launch a game, in Retroarch Quick Menu settings go to Shaders and locate the DerekMoore.glslp preset: drive.google.com/file/d/1MqDI-2pAVZ5Ewn-gLiQY3PbOWjCE892m/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the StarFox folder and select the StarFox.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/18lFaXcwFles-r8m5dq1i8YSvYjXyPbV9/view?usp=sharing
If you want my Retroarch SNES shader preset, follow the link then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your shaders folder in Retroarch. Then after you launch a game, in Retroarch Quick Menu settings go to Shaders and locate the DerekMoore.glslp preset: drive.google.com/file/d/1MqDI-2pAVZ5Ewn-gLiQY3PbOWjCE892m/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the SuperMetroid folder and select the SuperMetroid_Simple.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1A6X-TEhIJAzthdCEXmk-qccFHAbOpPoB/view?usp=sharing
If you want my Retroarch SNES shader preset, follow the link then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your shaders folder in Retroarch. Then after you launch a game, in Retroarch Quick Menu settings go to Shaders and locate the DerekMoore.glslp preset: drive.google.com/file/d/1MqDI-2pAVZ5Ewn-gLiQY3PbOWjCE892m/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the SuperMetroid folder and select the SuperMetroid.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1mLNZbSSBjA2taA3v6A3Zmqi_9C-k3xly/view?usp=sharing
If you want my Retroarch SNES shader preset, follow the link then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your shaders folder in Retroarch. Then after you launch a game, in Retroarch Quick Menu settings go to Shaders and locate the DerekMoore.glslp preset: drive.google.com/file/d/1MqDI-2pAVZ5Ewn-gLiQY3PbOWjCE892m/view?usp=sharing
merso-x.com/teenage-mutant-ninja-turtles-rescue
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Gran Turismo folder and select the gt2.cfg, make sure Overlays are enabled, here's the bezel (wallpaper inside):
drive.google.com/file/d/18ppjLeg81DYmjbx0DjtfJqj4a-SB60I3/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the SonicSpinball folder and select the SonicSpinball.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1zd1_kQtyaWjZamMzBnan2-ahy_zEX_9n/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Desert Strike folder and select the DesertStrike.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1tG-dzCVfkeaQmdODR56lGP52VuLH0X2a/view?usp=sharing
I also included one that has a subtle inked effect like the Jungle Strike one. So check that out and pick your favorite. For the (Inked) GrittyDesertStrike bezel, follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the GrittyDesertStrike folder and select the DesertStrike.cfg. Here's the bezel:
drive.google.com/file/d/1nr8jP-2tlK4P172kRG_bARb7f6JzPrWX/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Jungle Strike folder and select the JungleStrike.cfg, make sure Overlays are enabled, here's the bezel: drive.google.com/file/d/1rbR4O7gNGJRID8OCepu244k1etku9PHr/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Ecco folder and select the Ecco.cfg, make sure Overlays are enabled, here's the bezel: drive.google.com/file/d/1I5Rsd_455IYtsO7bPG4hh7PKletEaBJd/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Jurassic Park folder and select the JP.cfg, make sure Overlays are enabled, here's the bezel: drive.google.com/file/d/1xwolUrgdGT0tz0f8kqstQeCinrFeiw1o/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Jurassic Park folder and select the JP.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1bMPgGK1EuDHNGzn1M910NJYzwWyJ1YB3/view?usp=sharing
And here's my revised version of this bezel:
drive.google.com/file/d/1xwolUrgdGT0tz0f8kqstQeCinrFeiw1o/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the Metal Gear Solid folder and select the MGS_Derek.cfg, make sure Overlays are enabled, here's the bezel:
drive.google.com/file/d/1YAH1DYuNjqRb_Dt9vmvd5qVHYR_TX5-k/view?usp=sharing
Follow the link, then at the top right you'll see an option for download just to the left of the 3 dots. Once it's downloaded, extract it (unzip) to your Overlays folder in Retroarch. Then in Retroarch settings go to Overlays and select the RoadRashII folder and select the RoadRashII.cfg
drive.google.com/file/d/18K09Vbz9W54r81PoPk6MKNQ8__T1sHaA/view?usp=sharing
Here's the ROM:
romhustler.net/download/7190/RFloRzkzYjBxeUpmSXhmczJndVZvVXViV3d2bjExMUcwRmdhQzltaU56RTVNSHczTmk0eE1EWXVNVGsxTGpFMU0zd3hOVFl6T0RVeE5qazNmR1J2ZDI1c2IyRmtYM0JoWjJVPQ==
My Custom Bezel Art Collection:
drive.google.com/drive/folders/0B_kYDaRET47FaG9hS1Rjdnh4clk?usp=sharing
SRP discord link for the track download:
discordapp.com/invite/JydhbJG
download Shutoko Revival Project Beta v0.8 and hotfix v0.8.1 from
#💖track_downloads💖
You need Assetto Corsa's Content Manager to add the Shader Pack that allows headlight illumination on the track as well as the AI flood feature for 'Track Day' mode that places AI traffic around you, though it requires some additional work for the Shutoko Revival Project track. Here's the Content Manager: https://assettocorsa.club/content-manager.html
Here's the file you gotta add to the Track's folder to run AI on this track *Credit to Fahrdynamik JK: drive.google.com/file/d/1OlN5Augdgi9y6RLrGhOKpw8NeDFJjpOI/view
The working AI flood, like in the vid, requires the Shader Patch version 32, they broke it at some point. So if you want traffic, you gotta use the old crappy version of the Shader that doesn't properly support the new Sol weather system, and you gotta use a different method to make it night time, I use C1 Wangan Midnight Weather and PP filter with version 32 of Shader Patch when I want traffic - and I use the newest Shader Patch with all the improvements and full Sol weather and PP filters when I don't care about traffic. Here's the ver32 of Shader Patch for working AI (until they fix it in the Shader Patch new versions): mega.nz/#!n45UxY7B!avE_vO238VQVAZBM1YFCsBj7UzUk7w0VEpwazgN-7jk
Here's the C1 Wangan Midnight track+cars pack that contains a weather and filter for night time if using the old version of Shader Patch that has working AI traffic but isn't compatible with new versions of Sol with working day to night transitions. I know... it's complicated. This track isn't as detailed as the Shuto Revival version that was used in the video, but it's pretty good and it comes with the weather and PP filter to make a track night even without Sol, which can be useful: drive.google.com/drive/folders/1RYkWRGiR14VF77B7n0CrD0gwyy9nUHgp
And you'll want the Sol weather mod for day to night transitions if you don't need traffic, and it looks the best of any weather mod with tons of great options and real weather: racedepartment.com/downloads/sol.24914


