MobileRailSpotterRxR
BNSF 7152 Intermodal West | Arthur Rd. Railroad Crossing, Escalon CA
updated
Amtrak San Joaquins train 713 northbound (westbound) passes through the Milnes Road railrpad crossing on the BNSF Stockton Sub in Modesto, California.
Amtrak #713
AMTK CDTX 2001
Crossing Info
City: Modesto, California
Line/Crossing Owner: BNSF Railway
Line User: BNSF & AMTK
Bell Sequence: Ring till gates start rising.
Right Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Safetran
Install Type: BNSF Early 2020s, installed 2021
Left Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs
Mechanism/Counterweight Arms: Siemens (Safetran Logo)
Base: Safetran
Install Type: BNSF Late 1990s To Early 2000s, installed between 1995 - 2001
This crossing owned by BNSF Railway is an mixed install with the right signal being an BNSF early 2020s signal install. The left signal is an BNSF late 1990s signal install with bell, lights, gate, gate lights, mechanisms, and counterweight arms changed.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
I had almost left right when this BNSF train activated the crossing as I heard the M&ET train horn blowing and was about to leave to an M&ET Line crossing to catch it but said oh well since this train stopped me. In fact, you can hear the M&ET train's horn at the beginning also on their line as they were running a little later than usuall this day and I could of filmed them for the first time.
BNSF Railway manifest freight train northbound (westbound) passes through the 2nd Street railroad crossing on the BNSF Stockton Sub in Empire, California (Modesto). I haven't filmed this crossing also in a few years and tye GS Type 1 with the fallen in speaker is still ringing till this day. Glad that it is as I was told its dead but appearently it isn't.
BNSF 4038
BNSF 7135
Crossing Info
City: Modesto, California (Empire)
Line/Crossing Owner: BNSF Railway
Line User: BNSF & AMTK
Bell Sequence: Ring through whole activation
Right Signal
Bell: GS Type 2 E-Bell
Lights: 3 pairs of 12x24 inch Dialight Ball LEDs/ Safetran Lights (70s style)
Junction Boxes: Safetran (80s Style)
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install: ATSF 1970s to early 1980s, Installed between 1975 - 1985
Left Signal
Bell: GS Type 1 E-Bell
Lights: 2 pairs, Front - 1 pair of 12x24 inch Dialight Ball LEDs/Safetran Lights (70s style), Back - 1 pair of 12x24 inch GE Harmon Fading LEDs/Safetran Lights
Junction Boxes: Safetran (80s Style)
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install: ATSF 1970s to early 1980s, Installed between 1975 - 1985
This crossing owned by BNSF is an ATSF 1970s signal install with its bells, lights, gates, gate lights, and a mechanism and counterweights arms changed.
Camera
Sony Handycam FDR-AX53
BNSF Railway Manifest freight train southbound (eastbound) on the BNSF Stockton Sub passes through the California State Route 132 Yosemite Boulevard railroad crossing on the BNSF Stockton Sub in Modesto, California Empire region.
Its been a few years since I first & last filmed this crossing and nothing has changed since then. Since that, I was able to film from the across the intersection side of the crossing to show the inverted colors tracks sign that is still at this crossing till this day.
BNSF 6552
BNSF 6136
BNSF 7378
Crossing Info
City: Empire, California (Modesto)
Line/Crossing Owner: BNSF Railway
Line User: BNSF & AMTK
Bell Sequence: Ring till gates start rising.
Right Signal - Harmon Cantilever
Bell: GS Type 2 E-Bell
Lights: 3 pairs of 12x20 inch Dialight Ball LEDs/Safetran Lights
Junction Boxes: Harmon
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Whole Install: BNSF early to mid 2000s, Installed between 2001 - 2004
Left Signal - Harmon Cantilever
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x20 inch Dialight Ball LEDs/Safetran Lights & 1 pair of 12x20 inch GE Harmon Fading LEDs/Safetran Lights
Junction Boxes: Harmon
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Whole Install: BNSF early to mid 2000s, Installed between 2001 - 2004
This crossing owned by BNSF Railway is an BNSF early 2000s signal installs with gates and gate lights changed.
Camera
Sony Handycam FDR-AX53
Amtrak California San Joaquins train 710 southound (eastbound) with Siemens Venture cars and an ex-F40PH NPCU Cabbage leading arrived and departs the Modesto Station passing through the East Briggsmore Road railroad crossing on the BNSF Stockton Sub in Modesto, California. This view doesn't have good clearence of the station due to the hill.
Crossing Info
City: Modesto, California
Line/Crossing Owner: BNSF Railway
Line User: BNSF & AMTK
Bell Sequence: Ring through whole activation.
Right Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs
Mechanism/Counterweight Arm: Siemens
Base: Siemens
Install Type: BNSF Early 2020s, installed 2021
Left Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs
Mechanism/Counterweight Arm: Siemens
Base: Siemens
Install Type: BNSF Early 2020s, installed 2021
This crossing owned by BNSF is an BNSF early 2020s signal install.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
Sacramento Regional Transit light rail trains on tge SACRT Gold Line pass through the Nimbus Road railroad crossing in Rancho Cordova, California while the UP Florin Flyer was working down at Radius Recycle. The second train was late.
SACRT 210, 237 CAF S/200
Gold Line - Inbound
SACRT 227, 226 CAF S/200
Gold Line - Outbound
Crossing Info
City: Rancho Cordova, California
This crossing is owned by SACRT and is a horn zone for freight only and bells ring through whole activation.
Right Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: Four pairs of 12 inch RSI LEDs retrofitted inside Four pairs of 12x24 inch US&S Lights
Junction Boxes/Brackets: US&S
Gate Lights: WCH Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install Type/Installed: SACRT Mid 2000s, Installed In 2005
Median Signal
Lights: Six 12 inch RSI LEDs and One 12 inch GE Pixilated Look/Fading LEDs retrofitted inside Four pairs of 12x24 inch US&S Lights
Junction Boxes/Brackets: US&S
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arms: US&S Modal 95
Base: WCH
Install Type/Installed: SACRT Mid 2000s, Installed In 2005, Reinstalled in 2017 Knocked Down
Left Shoulder Signal
Cantilever: Fabricated Metals
Lights: Four pairs of 12 inch RSI LEDs retrofitted inside Four pairs of 12x24 inch US&S Lights
Junction Boxes/Brackets: US&S
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: One pair of 12 inch RSI LEDs retrofitted inside One pair of 12x24 inch US&S Lights
Junction Boxes/Brackets: US&S
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install Type/Installed: SACRT Mid 2000s, Installed In 2005
Yellow Flasher Signal (Not In View)
Lights: One pair of 12 inch Yellow Safetran Fading LEDs retrofitted in One pair of McCain Traffic Signal Lights & Brackets
Base: L&W
Install Type/Installed: SACRT Mid 2000s Yellow Flasher Install, Installed In 2005
Crossing also has two no right turn signals.
This crossing owned by Sacramento Regional Transit is an SACRT Mid 2000s signal install with its gates, gate lights, median base and a light changed from original equipment.
Camera
Sony Handycam FDR-AX53
Progress on the Folsom 15 Minute Glenn Doubke Tracking project on the Sacramento Regional Transit Gold Line in Folsom, California. This is the section between Bidwell Street and Glenn Drive railroad crossings. The switch amd the new track hasn't been welded yet.
Started this day off with this catch a BNSF with an executive SD70MAC here at Claus Rd. BNSF Railway intermodal stack train southbound possible Z-Train (eastbound dispatcher wise) passes through the Claus Road railroad crossing on the BNSF Stockton Sub in Modesto, California.
BNSF 7654
BNSF 5703
BNSF 4739
BNSF 6180
BNSF 9669
Crossing Info
City/State: Modesto, California
Line/Crossing Owner: BNSF Railway
Line Users: BNSF, AMTK, UP
Bell Sequence: Ring till gates rise
Right Signal
Bell: GS Type 2 E-Bell
Lights: Mast - 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights (Hawker Siddley), Overhead - 2 pairs of 12x20 inch Dialight Ball LEDs/Safetran Lights (Hawker Siddley)
Junction Boxes: Safetran
Install Type: ATSF 1980s, Installed between 1984 - 1993
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install Type: BNSF Early 2020s, installed 2020
Left Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights (Hawker Siddley)
Junction Boxes: Safetran
Install Type: ATSF 1980s, installed Between 1984 - 1993
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install Type: BNSF Early 2020s, installed 2020
This crossing owned by BNSF Railway with the cantilevers being ATSF 1980s to early 1990s signal installs with changes to its lights and bells. The gated masts are BNSF late 2010s to early 2020s installs.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
While I was filming the manifest train at Orr Rd down the road this day, I seen several Union Pacific maintainance of way machinery vehicles running eastward on the UP Ione Branch Line here in Galt, California so I came over here to the Elm Avenue railroad crossing here on the Ione Branch Line. This is the 3rd crossing I ever filmed active on the Ione Branch since I fiomed both Michigan Bar Rd crossings back in 2020 when the local freight that used this line use to be a daylight worked line but now this is a night worked line. This crossing is one I always wanted to film and got a chance to since the machines were using it.
The MoW Tie Gang used the UP Ione Branch as a parking track for their track work machines therefore, the Ione Branch this day and other days they used it as parking was temporarily out of service exept for the days the night freight train runs on it. The tie gang moved their machines on the line east past Elm Ave to fuel them up next to N Lincoln Way and when all move east and are refueled, they would head back west to get onto the UP Fresno Suh to start replacing dozens of track ties and sleepers.
------------------
This crossing on E Elm Ave mainly made of SP era WABCO crossing signals for the gated signals dating back to the 70s which would of originally had FS Mechanical Bells, 12x20 inch US&S Incandescent Lights, and Safetran Incandescent Gate Lights which have been replaced but everything else still from the SP 70s days. The gateless pedestrian signal was added on to this crossing in the late 2000s and early 2010s between 2009 - 2012 for a sidewalk that the city added that crossed the track at the crossing. Even though this crossing doesn't have its original FS Bells, it still has a couple of 1st Gen WCH Mechanical Bells.
------------------
Crossing Info - Read From First Perspective
City: Galt CA
Line/Crossing Owner: Union Pacific
Line User: UP
Bell Sequence: Ring till gates start rising
Gate-less Pedestrian Signals
Bell: WCH E-Bell "Type 3"
Lights: 2 pairs of 12x24 inch GE Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: UP Late 2000s - Early 2010s
Right Shoulder Signal
Bell: WCH Mechanical Bell
Lights: 3 pairs of 12x24 inch GE Harmon Fading LEDs/Harmon Lights
Junction Boxes: WABCO
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: WABCO Modal 75
Base: WABCO
Install: SP 1970s, Installed between 1972 - 1975
Left Shoulder Signal
Bell: WCH Mechanical Bell
Lights: 3 pairs of 12x24 inch GE Harmon Fading LEDs/Harmon Lights
Junction Boxes: WABCO
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: WABCO Modal 75
Base: WABCO
Install: SP 1970s, Installed between 1972 - 1975
This crossing owned by Union Pacific is an mixed install with the gated signals being an SP 1970s signal install with its bells, lights, light heads, gates, and gate lights not being the original equipment and were changes. The gated mast is an UP late 2000s to early 2010s era install signal.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
Union Pacific Railroad manifest freight train southbound passes through the Orr Road railroad crossing on the UP Fresno Sub in Galt, California.
Behind me on the Ione Branch, several MoW machines were preparing to come out onto the Fresno Sub to work on replacing dozend of ties.
UP 7980
UP 2627
UP 6022
UP 5382 (DPU)
UP 7895 (DPU)
Crossing Info
Galt, CA
This crossing owned by UPRR is a quiet zone and bells ring through whole activation.
Right Signal
Bell: NEG E-Bell
Lights: Two pairs of 12 inch GE Pixilated Look/Dotted LEDs retrofitted in Two pairs of 12x24 inch Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemena
Install Type: UP Early 2020s, Installed Between 2023
Left Signal
Bell: NEG E-Bell
Lights: Two pairs of 12 inch General Electric Pixilated Look/Dotted LEDs retrofitted in Two pairs of 12x24 inch Safetran Lights
Junction Box: Safetran
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install Type: UP Mid To Late 2010s, Installed 2019
This crossing is an mixed install owned by Union Pacific with the right signal being an UP early 2020s signal install. The left signal is an UP late 2010s signal build install with changes to its lights, light heads, gate, and gate light.
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad Stockton Turn Hauler Local freight train lead by an SD70M northbound the UP Fresno Sub passes through the C Street railroad crossing in Galt, California while UP was preparing to shut the line down for the late afternoon and evening so a maintainance of way tie gang could replace several dozens of ties and also had people controlling the traffic as they will shut off all crossings circuits to work on the ties this day.
LRS59
UP 4560
UP 9926
UP 9916
Crossing Info
City/State: Galt, California
Location: C St & 4th St
Horn Setting: Quiet Zone
Crossing Owner and Maintainer: Union Pacific Railroad
Bell Sequence: Ring through whole activation
Right Signal
Cantilever: Harmon (1960s To 1970s Style)
Lights: Three pairs of 12 inch Harmon Dotted LEDs
Light Heads: Mast - One pair of 12x24 inch WCH Lights, Overhead - two pairs of 12x20 inch Harmon Lights
Brackets: Harmon
Junction Boxes: Harmon
Install Type: SP 1970s
Installed: Between 1971 - 1978
- Gated Mast
Bell: WCH Type 1.5 Electronic Bell
Lights: One pair of 12 inch WCH 1st Generation LEDs
Light Heads: One pair of 12x24 inch WCH Lights
Brackets: WCH
Junction Box: WRRS (WCH)
Gate Lights: Electro-Tech Gate LEDs
Counterweight Arms: WCH
Mechanism: WCH
Base: WCH
Install Type: UP Early 2000s
Installed: Between 2002 - 2004
Left Signal
Cantilever: Harmon (1960s to 1970s Style)
Lights: Three pairs of 12 inch Harmon Dotted LEDs
Light Heads: Mast - One pair of 12x24 inch WCH Lights, Overhead - two pairs of 12x20 inch Harmon Lights
Brackets: Harmon
Junction Boxes: Harmon
Install Type: SP 1970s
Installed: Between 1971 - 1978
- Gated Mast
Bell: WCH Type 1.5 Electronic Bell
Lights: One pair of 12 inch WCH 1st Generation LEDs
Light Heads: One pair of 12x24 inch WCH Lights
Brackets: WCH
Junction Box: WRRS (WCH)
Gate Lights: Electro-Tech Gate LEDs
Counterweight Arms: WCH
Mechanism: WCH
Base: WCH
Install Type: UP Early 2000s
Installed: Between 2002 - 2004
Gate-less Pedestrian Signal
Bell: WCH Type 2 Electronic Bell
Lights: Two pairs of 12 inch GE/Harmon Fading LEDs
Light Heads: Two pairs of 12x24 inch Harmon Lights
Brackets: Harmon
Junction Box: Harmon
Base: Harmon
Install Type: UP Early 2010s
Installed: 2011
This crossing ownes by Union Pacific is an mixed install with the cantilevers being an SP 1970s install type with changes to there lights, light heads, and brakcets. It's gated masts are UP Early 2000s Install types with changes to there gates and gate lights. The gateless signal is an UP Early 2010s signal type install.
Camera
Sony Handycam FDR-AX53
Sacramento Regional Transit light rail trains on the SACRT Gold Line passing through the Bradshaw Road railroad crossing in Rancho Cordova, California. Got views of the crossing activation beacon dwarfs also. The side light is still crooked. Very unfortunate as the last sigbal side lights SACRT didn't even bother fixing to their correct possition and now this one as one crooked.
SACRT 218, 232 CAF S/200
Gold Line - Outbound
SACRT 221 CAF S/200
Gold Line - Inbound
SACRT 210, 237 CAF S/200
Gold Line - Inbound
SACRT 227, 228 CAF S/200
Gold Line - Outbound
Crossing Info
City: Rancho Cordova, CA
Line(s) Owner: Sacramento Regional Transit = Light Rail Tracks, UP = Freight Track
Crossing Owner: SACRT
Bell Sequence: Ring through whole activation
Right Shoulder Signal
Bell: GS Type 3 E-Bell
Lights: 4 pairs, Main - 2 pairs of 12x24 inch GE Harmon Fading LEDs/Harmon Lights, Side - 3 12x24 inch Safetran Fading LEDs/Safetran Lights (by Siemens), 1 12x24 inch Safetran LEDs/Safetran Light (80s/90s Light)
Junction Boxes: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: L&W
Install: SACRT spare parts from late 2000s, Mid 2010s, and early 2020s, and even a light from a SACRT 1980s Install, Installed 2024
Right Hand Turn Lane Signal
Bell: GS Type 2 E-Bell
Lights: 3 12x24 inch Safetran Fading LEDs/Safetran Lights and 1 12x24 inch Safetran LEDs/Safetran Light
Junction Box: Safetran
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install Type: SACRT Late 1990s, Installed in 1998
Left Shoulder Signal - Safetran Cantilever
Bell: GS Type 2 E-Bell
Lights: 6 pairs of 12x24 Safetran Fading LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install Type: SACRT Late 1990s, Installed in 1998
Median Signal
Lights: 3 pairs of lights, Main - 2 pairs of 12x24 inch Safetran Fading LEDs/WCH Lights (90s Style), Side - 1 pair of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Main - WRRS (WCH), Side - Safetran
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: SP Early to Mid 1990s, Installed between 1992 - 1995
2 L&W Crossing Dwarf Beacon Signals on OCS Pole.
1 Yellow Flasher Advanced Warning Signal with traffic signal parts.
Crossing also has 2 no right turn blank outs LED signs owned by the county.
This crossing owned by Sacramento Regional Transit is an mixed install with the shoulder signal is a SACRT install build from recycled spare and new parts of SACRT late 2000s, mid 2010s, early 2020s, and a light from a 1980s install. Left shoulder cantilever signal and the turn lane signal being SACRT Late 1990s signal installs with the cantilever signal having its bell, gate, gate lights, mechanism, and counterweight arms changed from originals and the turn lane signal had its bell, a light, a light head, brackets, junction box, gate, gate lights, mechanism, and counterweight arms all changed from the originals. The median signal is an ex-SP signal being an SP early to mid 1990s signal install that SACRT kept here with the side lights being added by SACRT. Its lights, gate, gate lights, mechanism, and counterweight arns were changed.
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad Florin Flyer Local freight train passes through the Mather fIeld Road railroad crossing on the UP Placerville Branch and arround the Mather Field/Mills Station headed back west and an outboujd Sacramento Regional Transit Gold Line light rail train passes on the Gold Line through Mather Field Rd in Rancho Cordova, California.
YSR62R
UPY 601
UPY 617
SACRT 221 CAF S/200
Gold Line - Outbound
Crossing Info
City: Rancho Cordova, California
Track Line Owner/Users: Light Rail - Sacramento Regional Transit, Freight - UP & SACRT Joint Powers
Crossing Owner: Sacramento Regional Transit
Bell Sequence: Ring through whole activation
Turn Lane Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: L&W
Install: SACRT Early 2000s Type B, Installed 2004 & knocked reinstalled 2021
Right Shoulder Signal - Harmon Cantilever
Lights: 6 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Boxes: Harmon
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install: SACRT Early 2000s Type B, Installed 2004
Left Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Left Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights (1 by Siemens & GE)
Junction Box: Safetran
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install: SACRT Late 90s, installed in 1998
Median Signal - Safetran 1990s Cantilever
Bell: Non Functional Safetran Mechanical Bell
Lights: 4 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Bell: WCH E-Bell "Type 2"
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Whole Install: SACRT Late 90s, Installed 1998
Right Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Yellow Flasher Advance Folsom Blvd Signal (Not In View)
Lights: 1 pair of 12 inch Yellow Safetran Fafing LEDs
Junction Box: Harmon
Base: Harmon
Install: SACRT early 2000s yellow flasher, installed 2004, knocked reinstalled 2024
This crossing also has two no right turn blank ouy signals.
This crossing owmed by SACRT is an mixed install with the gatef signals on the southern (far) side being SACRT Late 1990s signal installs with bell, a couple of lights one on cantilever and one on shoulder, gate, gate lights, mechanisms, and counterweight arms changed from the original install equipment. The two gateless signals and two gated signals near the intersection are an SACRT Early 2000s Type B signal install with gate, gate lights, mechanisms, counterweight arms, and a base change for the turn lane. The yellow flasher is a SACRT early 2000s install.
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad Florin Flyer Local freight train heads back west passing through the Marketplace Lane railroad crossing on the UP Placerville Branch in Rancho Cordova, California.
YSR62R
UPY 601
UPY 617
Crossing Info
City: Rancho Cordova, California
Crossing Owner: Sacramento Regional Transit
Line Owner(s) & Users: SACRT Light Rail Tracks & UP Freight Track
Bell Sequence: Ring through whole activation
Right Shoulder Signal - Fabricated Metals Cantilever
Lights: Mast - 1 pair, 1 12x24 inch Electro-Tech RSI LEDs/US&S Light & 1 12x24 inch US&S LEDs/US&S Light, Overhead - 3 pairs of 12x24 RSI LEDs/US&S Lights
Junction Box: US&S
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12x24 inch RSI LEDs/US&S Lights
Junction Box: US&S
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install: SACRT Mid 2000s, Installed 2005
Median Signal
Bell: GS Type 1 E-Bell
Lights: 3 pairs, 2 pairs of 12x24 inch Electro-Tech RSI LEDs/US&S Lights & 1 pair of 12x20 inch Electro-Tech RSI LEDs/US&S Lights
Junction Boxes: US&S
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Ansaldo STS US&S Modal 95
Base: L&W
Install: Knock Down Made from SACRT mid 2000s, early 2010s, and late 2010s install parts, Installed 2017, Latest Re-installed 2024
Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 3 pairs *new*, Main - 1 pair of 12x24 inch RSI LEDs/US&S Lights, Side - 2 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Main - US&S, Side - Safetran (80s Style)
Base: L&W *new*
Install: SACRT Mid 2000s, Installed 2005, reinstalled 2024
Two L&W crossing activation beacons currently not yet functional.
Yellow Flasher Signal (Not In View)
Lights: 1 pair of 12x24 inch GE Yellow Safetran Fading LEDs/McCain Traffic Light
Junction Box: L&W
Base: L&W
Install: SACRT mid 2000s yellow flasher install, installed 2005
This crossing also has two no right turn blank out LED sign signals with 1 currently not working.
This crossing owned by SACRT is a mixed install with the cantilever signal being an SACRT mid 2000s install with a light, gate, and gate light changes from original. The median is an SACRT spare parts made signal from mid 2000s, early 2010s, and late 2010s install parts, the gateless signal is an SACRT Mid 2000s install with its lights, light heads, a junction box, and base changes from original.
Camera
Sony Handycam FDR-AX53
Sometime last week between last Tuesday and Friday, the median signal at this crossing once again was knocked down and reset back up with a new base and its side lights now look its position is off but only due to a shorter new bracket. The sand barrel protected the signal from fully being destroyed again so everything else remains the same except also a new sand barrel as the last one was destroyed. The median signal at this crossing is a magnet to being hit by cars and trucks both. This knock over however was likely a truck that miscalculated the turn and the trailer knocked the signal down. This happened nearly 2 weeks after the gateless signal at this crossing was damaged in the train vs car crash and was reset back up itself with "new" lights and base.
After a couple of inbound and outbound Sacrsmento Regional Transit light rail trains on the SACRT Gold Line, the Union Pacific Railroad Florin Flyer Local freight train on the UP Placerville Branch passes through the Marketplace Lane railroad crossing in Rancho Cordova, California arriving to work at Radius Recycle.
SACRT 110, 107 Siemens-Duewag U2a
Gold Line - Inbound
SACRT 237, 210 CAF S/200
Gold Line - Outbound
YSR62R
UPY 617 EMD GP15-1
UPY 601 EMD GP15-1
Crossing Info
City: Rancho Cordova, California
Crossing Owner: Sacramento Regional Transit
Line Owner(s) & Users: SACRT Light Rail Tracks & UP Freight Track
Bell Sequence: Ring through whole activation
Gate-less Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 3 pairs *new*, Main - 1 pair of 12x24 inch RSI LEDs/US&S Lights, Side - 2 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Main - US&S, Side - Safetran (80s Style)
Base: L&W *new*
Install: SACRT Mid 2000s, Installed 2005, reinstalled 2024
Median Signal
Bell: GS Type 1 E-Bell
Lights: 3 pairs, 2 pairs of 12x24 inch Electro-Tech RSI LEDs/US&S Lights & 1 pair of 12x20 inch Electro-Tech RSI LEDs/US&S Lights
Junction Boxes: US&S
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Ansaldo STS US&S Modal 95
Base: L&W
Install: Knock Down Made from SACRT mid 2000s, early 2010s, and late 2010s install parts, Latest Reinstalled 2024
Left Shoulder Signal - Fabricated Metals Cantilever
Lights: Mast - 1 pair, 1 12x24 inch Electro-Tech RSI LEDs/US&S Light & 1 12x24 inch US&S LEDs/US&S Light, Overhead - 3 pairs of 12x24 RSI LEDs/US&S Lights
Junction Box: US&S
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12x24 inch RSI LEDs/US&S Lights
Junction Box: US&S
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install: SACRT Mid 2000s, Installed 2005
Two L&W crossing activation beacons currently not yet functional.
Yellow Flasher Signal (Not In View)
Lights: 1 pair of 12x24 inch GE Yellow Safetran Fading LEDs/McCain Traffic Light
Junction Box: L&W
Base: L&W
Install: SACRT mid 2000s yellow flasher install, installed 2005
This crossing also has two no right turn blank out LED sign signals with 1 currently not working.
This crossing owned by SACRT is a mixed install with the gateless signal being an SACRT Mid 2000s install with its lights, light heads, a junction box, and base changes from original. The median is an SACRT spare parts made signal from mid 2000s, early 2010s, and late 2010s install parts. The cantilever signal being an SACRT mid 2000s install with a light, gate, and gate light changes from original.
Camera
Sony Handycam FDR-AX53
After a lunch break stop the crew had, Union Pacific Railroad Florin Flyer Local fteight train on the UP Placerville Branch line heard running through the Mather Field/Mills Station pedestrian crossings at the beginning then passes through the Mather Field Road railroad crossing in Rancho Cordova, California followed by an outbound Sacramento Regional Transit light rail train on the Gold Line running single car due to mechanical issues.
YSR62R
UPY 617 EMD GP15-1
UPY 601 EMD GP15-1
SACRT 215 CAF S/200
Gold Line - Outbound
Crossing Info
City: Rancho Cordova, California
Track Line Owner/Users: Light Rail - Sacramento Regional Transit, Freight - UP & SACRT Joint Powers
Crossing Owner: Sacramento Regional Transit
Bell Sequence: Ring through whole activation
Right Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights (1 by Siemens & GE)
Junction Box: Safetran
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install: SACRT Late 90s, installed in 1998
Median Signal - Safetran 1990s Cantilever
Bell: Non Functional Safetran Mechanical Bell
Lights: 4 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Bell: WCH E-Bell "Type 2"
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Whole Install: SACRT Late 90s, Installed 1998
Left Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Turn Lane Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: L&W
Install: SACRT Early 2000s Type B, Installed 2004 & knocked reinstalled 2021
Left Shoulder Signal - Harmon Cantilever
Lights: 6 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Boxes: Harmon
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install: SACRT Early 2000s Type B, Installed 2004
Right Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Yellow Flasher Advance Folsom Blvd Signal (Not In View)
Lights: 1 pair of 12 inch Yellow Safetran Fafing LEDs
Junction Box: Harmon
Base: Harmon
Install: SACRT early 2000s yellow flasher, installed 2004, knocked reinstalled 2024
This crossing also has two no right turn blank ouy signals.
This crossing owmed by SACRT is an mixed install with the gatef signals on the southern side being SACRT Late 1990s signal installs with bell, a couple of lights one on cantilever and one on shoulder, gate, gate lights, mechanisms, and counterweight arms changed from the original install equipment. The two gateless signals amd two gated signals near the intersection are an SACRT Early 2000s Type B signal install with gate, gate lights, mechanisms, counterweight arms, and a base change for the turn lane. The yellow flasher is a SACRT early 2000s install.
Camera
Sony Handycam FDR-AX53
After an inbound Sacramento Regional Transit light rail on the SACRT Gold Line, the Union Pacific Railroad Florin Flyer Local freight train makes its way past the College Greens Station with a meet and passes through the Florin Perkins Road railroad crossing on the UP Placerville Branch in Sacramento, California. Light Rail ran some single car trains sue to mechanical issues with the old fleet.
SACRT 215 CAF S/200
Gold Line - Inbound
YSR62R
UPY 617 EMD GP15-1
UPY 601 EMD GP15-1
Timestamps
0:00 Light Rail Pass & Distant Freight Train Horn
1:26 College Greens Station With Light Rail & Freight Approach
2:23 Freight Train Pass
Crossing Info
Sacramento, CA
This crossing owned by SACRT is a horn zone for freight and bells ring through the whole activation.
Right Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 4 pairs of 12 Harmon Fading LEDs retrofitted in 4 pairs of 12x24 inch Harmon Lights
Junction Boxes: Harmon
Gate Lights: NEG Gate LEDs"Alstom-Aurora Style"
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: SACRT Early 2000s, Installed 2003
Median Signal
Lights: 4 pairs of 12 Harmon Fading LEDs retrofitted in 4 pairs of 12x24 inch Harmon Lights
Junction Boxes: Harmon
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: SACRT Early 2000s, Installed 2003
Left Pedestrian Gate-less Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12 inch Harmon Fading LEDs retrofitted in 2 pairs of 12x24 inch Harmon Lights
Junction Box: Harmon
Base: Harmon
Install Type: SACRT Early 2000s, Installed 2003
Left Shoulder Signal
Cantilever: Harmon
Lights: 5 pairs of 12 inch Harmon Fading LEDs retrofitted in 5 pairs of 12x24 inch Harmon Lights
Junction Boxes: Harmon
- Shoulder Gated
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12 inch Harmon Fading LEDs retrofitted in 1 pair of 12x24 inch Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: SACRT Early 2000s, Installed 2003
Median Signal Other Side
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12 inch Harmon Fading LEDs in 2 pairs of 12x24 inch Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Gate LEDs"Alstom-Aurora Style"
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: SACRT Early 2000s, Installed 2003
Right Pedestrian Gate-Less Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12 inch Harmon Fading LEDs retrofitted in 2 pairs of 12x24 inch Harmon Lights
Junction Box: Harmon
Base: Harmon
Install Type: SACRT Early 2000s, Installed 2003
Yellow Flasher Signal - Not In View
Lights: 1 pair of 12 inch Safetran Fading LEDs retrofitted in 12 inch Safetran Lights
Junction Box: Harmon
Base: Harmon
Install Type: SACRT Early 2000s
Installed: 2003
Crossing also has two no right turn signals.
This crossing owned by Sacramento Regional Transit is an SACRT Early 2000s signal install with its right gateless signals bell, gates, gate lights, mechanisms, and counterweight arms.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
Altura Wide Lense
BNSF Railway port job yard local freight train westbound passes through the South San Joaquin Street railroad crossing on the BNSF Stockton Sub after Amtrak and after the YST65 passed in UP's side in Stockton, California.
The Port - Stockton Yard Job this day had an interesting consist with an H1 leader, 2 units being 6 axle power, and had 1 B40-8W still with them also that lead the train back to Mormon and Riverbank later in the day. I didn't get that return trip move however. Of course for a good catch here, its timed for a bus to come.
BNSF 971
BNSF 4419
BNSF 533
Crossing Info
Stockton, Ca
This crossing owned by the BNSF Railway is an horn zone and bells ring till the gates start rising.
Right Signal
Bell: GS Type 2 Electronic Bell
Cantilever: US&S
Lights: Mast Main - Two pairs of 12 inch GE/Harmon Fading LEDs, Mast Side - One pair of 12 inch General Signals LEDs, Overhead - Two pairs of 12 inch General Signals LEDs retrofitted in Five pairs of 12x20 inch Safetran Lights
Junction Boxes: Safetran
Install Type: ATSF 1940s - 1950s, Installed Between 1945 - 1955
- Gated Short Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install Type: ATSF 1970s To 1980s, Installed Between 1975 - 1989
Left Signal
Bell: GS Type 2 Electronic Bell
Cantilever: US&S
Lights: Mast Main - Two pairs of 12 inch GE/Harmon Fading LEDs, Overhead - Two pairs of 12 inch General Signals LEDs retrofitted in Four pairs of 12x20 inch Safetran Lights
Junction Boxes: Safetran
Install Type: ATSF 1940s - 1950s, Installed Between 1945 - 1955
- Gated Short Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install Type: ATSF 1970s To 1980s, Installed Between 1975 - 1989
This crossing owned by the BNSF Railway is an mixed install with the cantilevers being an ATSF mid 1940s to 1950s signal installs with its bells, lights, light heads, and junction boxes being the changes to them. The gated mast stubs are ATSF 1970s signal installs with their gates, gate lights, and a base being changed.
Camera
Sony Handycam FDR-AX53
Amtrak San Joaquins Train 713 westbound passes through the South San Joaquin Street railroad crossing on the BNSF Stockton Sub arriving and departing the Amtrak Stockton San Joaquin Street Station in Stockton, California. Midway through the video after the train arrives, a car driving around the gates almost hits a car turning around.
Amtrak #713
AMTK CDTX 2104
Crossing Info
Stockton, Ca
This crossing owned by the BNSF Railway is an horn zone and bells ring till the gates start rising.
Right Signal
Bell: GS Type 2 Electronic Bell
Cantilever: US&S
Lights: Mast Main - Two pairs of 12 inch GE/Harmon Fading LEDs, Mast Side - One pair of 12 inch General Signals LEDs, Overhead - Two pairs of 12 inch General Signals LEDs retrofitted in Five pairs of 12x20 inch Safetran Lights
Junction Boxes: Safetran
Install Type: ATSF 1940s - 1950s, Installed Between 1945 - 1955
- Gated Short Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install Type: ATSF 1970s To 1980s, Installed Between 1975 - 1989
Left Signal
Bell: GS Type 2 Electronic Bell
Cantilever: US&S
Lights: Mast Main - Two pairs of 12 inch GE/Harmon Fading LEDs, Overhead - Two pairs of 12 inch General Signals LEDs retrofitted in Four pairs of 12x20 inch Safetran Lights
Junction Boxes: Safetran
Install Type: ATSF 1940s - 1950s, Installed Between 1945 - 1955
- Gated Short Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install Type: ATSF 1970s To 1980s, Installed Between 1975 - 1989
This crossing owned by the BNSF Railway is an mixed install with the cantilevers being an ATSF mid 1940s to 1950s signal installs with its bells, lights, light heads, and junction boxes being the changes to them. The gated mast stubs are ATSF 1970s signal installs with their gates, gate lights, and a base being changed.
Camera
Sony Handycam FDR-AX53
Amtrak San Joaquins Train 712 eastbound on the BNSF Stockton Sub passes through the South Airport Way railroad crossing in Stockton, California witj the closest signal in front of me being a new signal at this crossing.
Old Signal
youtu.be/Z7cBQBcejQ4?si=GzQxjRArBM3F4EkB
Amtrak
AMTK CDTX 6962
AMTK CDTX 2006
Crossing Info
City: Stockton, CA
Line/Crossing Owner: BNSF Railway
Line User: BNSF, Amtrak, UP
Bell Sequence: Ring till gates start rising
Left Signal - Harmon Cantilever 1970s Style
Bell: Safetran Type 1 E-Bell
Lights: Mast - Two pairs of 12x20 inch Dialight Ball LEDs/Harmon Lights (70s Style), Overhead - Two pairs of 12x20 inch GE LEDs/Harmon Lights (70s Style)
Junction Box: Harmon
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: WRRS
Install: ATSF 1970s, Installed Between 1971 - 1979
Gate-less Signal *New Knock Down Replacement*
Lights: One pair of 12x24 inch Dialight Ball LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: BNSF early to mid 2020s signal install, Installed 2024
Right Signal - Harmon Cantilever 1970s Style
Bell: GS Type 3 E-Bell
Lights: Mast - Two pairs of 12x20 inch Dialight Ball LEDs/Harmon Lights (70s Style), Overhead - Two pairs of 12x20 inch GE LEDs/Harmon Lights (70s Style)
Junction Box: Harmon
- Gated Mast
Lights: One 12x20 inch Dialight Ball LEDs/Safetran Light & One 12x20 inch GS LEDs/Safetran Light both lights Hawker Siddley Era
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arm: US&S Modal 95
Base: WRRS
Install Type: ATSF 1970s, Installed Between 1971 - 1979
This crossing owned by BNSF is an ATSF mixed install with the cantilevers being an ATSF 1970s signal install with its bells, lights, gates, gate lights, mechanisms, and counterweight arms changed. A gated mast has extra lights that were add ons and had a light changed. The gateless signal is an BNSF early to mid 2020s install.
Camera
Somy Handycam FDR-AX53
UP 5713
UP 4758
UP 8651 (DPU)
Discovered back in April that the gate-less ATSF era US&S signal facing the alley way had been replaced with a brand new Siemens modern Safetran signal unexpectedly as these gateless signals usually aren't touched. Come to find out, I was told that the ATSF era gateless signal was leaning badly when last seen. This was due to a car hitting and knocking over the signal and its foundation was damaged also resulting in BNSF replacing the entire signal and its foundation rebuilt. Later this day, I did get a side view of it head on to see its lights with a Amtrak that passed and I'll have the previous signal linked in that video. Note that the close remaining rare Safetran Type 1 Electronic Bell here is not sounding good as it starts out at its normal volumn and then it lowers and gets really quiet but then slowly starts back getting louder again.
BNSF Railway grain train eastbound passes through the South Airport Way railroad crossing on the BNSF Stockton Sub in Stockton, California. The YST65 Local departed the Diamond on UP's side so I couldn't film them.
BNSF 5895
BNSF 7545
BNSF 7745
BNSF 4154
BNSF 8164 (DPU)
BNSF 4617 (DPU)
BNSF 7503 (DPU)
Crossing Info
City: Stockton, CA
Line/Crossing Owner: BNSF Railway
Line User: BNSF, Amtrak, UP
Bell Sequence: Ring till gates start rising
Right Signal - Harmon Cantilever 1970s Style
Bell: Safetran Type 1 E-Bell
Lights: Mast - Two pairs of 12x20 inch Dialight Ball LEDs/Harmon Lights (70s Style), Overhead - Two pairs of 12x20 inch GE LEDs/Harmon Lights (70s Style)
Junction Box: Harmon
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: WRRS
Install: ATSF 1970s, Installed Between 1971 - 1979
Gate-less Signal *New Knock Down Replacement*
Lights: One pair of 12x24 inch Dialight Ball LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: BNSF early to mid 2020s signal install, Installed 2024
Signal - Harmon Cantilever 1970s Style
Bell: GS Type 3 E-Bell
Lights: Mast - Two pairs of 12x20 inch Dialight Ball LEDs/Harmon Lights (70s Style), Overhead - Two pairs of 12x20 inch GE LEDs/Harmon Lights (70s Style)
Junction Box: Harmon
- Gated Mast
Lights: One 12x20 inch Dialight Ball LEDs/Safetran Light & One 12x20 inch GS LEDs/Safetran Light both lights Hawker Siddley Era
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arm: US&S Modal 95
Base: WRRS
Install Type: ATSF 1970s, Installed Between 1971 - 1979
This crossing owned by BNSF is an ATSF mixed install with the cantilevers being an ATSF 1970s signal install with its bells, lights, gates, gate lights, mechanisms, and counterweight arms changed. A gated mast has extra lights that were add ons and had a light changed. The gateless signal is an BNSF early to mid 2020s install.
Camera
Somy Handycam FDR-AX53
After leaving Farmington Rd where I originally wanted to catch a freight, this one deoarted the Mariposa Intermodal Yard so I ended up filming it at the BNSF/UP Stockton Diamond and through the South Aurora Street railroad crossing on the BNSF Stockton Sub in Stockton, California.
After the train passed, you can see the UP YST65 Local pulling up to the diamond and waiting for a BNSF coming off the Sac and Fresno Sub onto BNSF's side before they head to the Old WP Yard interchange with ST&E.
BNSF 7118
BNSF 7205
BNSF 4468
Camera
Sony Handycam FDR-AX53
Finally, SACRT has fixed the southern side northbound lanes shoulder signal after one of its back side lights broke off in a storm back in Feb 2024 4 months later finally being fixed by being replaced with a new light and keeping the signal looking 99 percent the same. The original signals old 12x24 inch Safetran Fading LEDs/Safetran Light with the slightly shorter visor and smooth 24 inch background was replaced by a new GE/Siemens made 12x24 inch Safetran Fading LED/used late 2000s - 2010s Safetran Light and longer visor and the 24 inch Safetran background with the fold ring all being that 1 percent difference or change. The 24 inch background with the fold line and longer visor was used by SACRT in their late 1980s and mid 2010s Safetran installs. This signal a SACRT late 1990s Safetran install didn't use these background and visors. Glad to have this crossing finally to its build.
Sacramento Regional Transit light rail trains on the SACRT Gold Line pass through the Mather Field Road railroad crossing in Rancho Cordova, California. Trains that meet here were because the outbounds were late.
Trains
SACRT 237 224 CAF S/200
Gold Line - Inbound
SACRT 127 130 Siemens Duewag U2a
Gold Line - Outbound
SACRT 239 232 CAF S/200
Gold Line - Outbound
SACRT 130 127 Siemens Duewag U2a
Gold Line - Inbound
SACRT 116 129 Siemens Duewag U2a
Gold Line - Inbound
SACRT 107 125 Siemens-Duewag U2a
Gold Line - Outbound
SACRT 211 222 CAF S/200
Gold Line - Outbound
Crossing Info (First Angle)
City: Rancho Cordova, California
Crossing Owner: Sacramento Regional Transit
Bell Sequence: Ring through whole activation
Right Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights (1 by Siemens & GE)
Junction Box: Safetran
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install: SACRT Late 90s, installed in 1998
Median Signal - Safetran 1990s Cantilever
Bell: Non Functional Safetran Mechanical Bell
Lights: 4 pairs of 12x24 inch Safetran Fading LEDs/Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Bell: WCH E-Bell "Type 2"
Gate Lights; NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Whole Install: SACRT Late 90s, Installed 1998
Left Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Turn Lane Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: L&W
Install: SACRT Early 2000s Type B, Installed 2004 & knocked reinstalled 2021
Left Shoulder Signal - Harmon Cantilever
Lights: 6 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Boxes: Harmon
- Gated Mast
Bell: GS Type 2 E-Bell
Lights: 1 pair of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install: SACRT Early 2000s Type B, Installed 2004
Right Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Harmon Fading LEDs/Harmon Lights
Junction Box: Harmon
Base: Harmon
Install: SACRT Early 2000s Type B, Installed 2004
Yellow Flasher Advance Folsom Blvd Signal (Not In View)
Lights: 1 pair of 12 inch Yellow Safetran Fafing LEDs
Junction Box: Harmon
Base: Harmon
Install: SACRT early 2000s yellow flasher, installed 2004, knocked reinstalled 2024
This crossing also has two no right turn blank ouy signals.
This crossing owmed by SACRT is an mixed install with the gatef signals on the southern side being SACRT Late 1990s signal installs with bell, a couple of lights one on cantilever and one on shoulder, gate, gate lights, mechanisms, and counterweight arms changed from the original install equipment. The two gateless signals amd two gated signals near the intersection are an SACRT Early 2000s Type B signal install with gate, gate lights, mechanisms, counterweight arms, and a base change for the turn lane. The yellow flasher is a SACRT early 2000s install.
Camera
Sony Handycam FDR-AX53
Samsung Galaxy S24 Ultra (Last Apporach View)
Haven't filmed this crossing in 4 years. Setup at this crossing originally for a freight and got this Amtrak while waiting for a while. Since I wamted to also ranfan another line this day, I left after this due to waiting a while because I didn't want to start missing trains on the other line which was the Fresno Sub. Soon as I left, I discovered the new signal at Airport Way and also, the BNSF Z departed Mariposa Yard not to long after I left here but got it at the Diamond. I seen the Z when it arrived at Mariposa Intermodal Yard but I assumed it would take hours switching as it did take a while and wasn't sure if it would continue west so I left after Armtrak and it did end up departing afterwards. Didn't miss it though just didn't film it where I wanted to whichbwas here.
Amtrak San Joaquins Train 710 southbound (eastbound dispatcher wise) with Siemens Venture Cars and an ex-F40PH NPCU Cabbage leader unit passes through the Farmington Road railroad crossing in Stockton, California on the BNSF Stockton Sub.
Amtrak #710
AMTK CDTX 90218
AMTK CDTX 2106
Crossing Info
City: Stockton California
Train Line/Crossing Owner: BNSF Railway
Line User: BNSF, Amtrak, UP
Bell Sequence: Ring through whole activation
Right Shoulder Signal - Safetran Cantilever (1980s Style)
Bell: GS Type 2 E-Bell
Lights: 3 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Boxes: Safetran
Install: ATSF late 1980s - early 1990s install, Installed possible between 1985 - 1992
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install - Gated Mast: BNSF early to mid 2000s signal install, installed between 2004 - 2006
Median Signal
Lights: 2 pairs of 12x24 inch GS LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install - Gated Mast: BNSF early to mid 2000s signal install, installed between 2004 - 2006
Lefr Shoulder Signal - Harmon Cantilever
Bell: GS Type 2 E-Bell
Lights: 3 pairs, Mast - 1 pair of 12x24 inch GE Harmon Fading LEDs/Safetran Lights, Overhead - 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Boxes: Safetran
Install: BNSF late 1990s to early 2000s install, Installed possible between 1998 - 2004
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install - Gated Mast: BNSF early to mid 2000s signal install, installed between 2004 - 2006
Median Signal 2
Lights: 2 pairs of 12x24 inch GS LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: US&S Modal 95
Base: US&S
Install - Gated Mast: BNSF early to mid 2000s signal install, installed between 2004 - 2006
This crossing owned by BNSF Railway is an mixed install with all gated masts being BNSF early to mid 2000s signal install with gate and gate lights changed. The right cantilever is an ATSF late 1980s to early 1990s signal install with its bell and lights changed. The left cantilever is an BNSF late 1990s to early 2000s signal install.
Far ahead traffic signals flash red when crossing gates are lowered.
Camera
Sony Handycam FDR-AX53
Behind Amtrak, BNSF Railway grainer freight train passes through the Carpenter Road railroad crossing on the BNSF Stockton Sub with an Norfolk Southern unit in Stockton, California. Believe it or not, this is my first time filmimg a freight here but 3rd time filming third crossing.
BNSF 7890
BNSF 6395
NS 9625
BNSF 9250
Crossing Info
City: Stockton, California
Line/Crossing Owner: BNSF Railway
Line User: BNSF, Amtrak, UP
Bell Sequence: Ring till gates start rising
Right Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Invensys Rail
Base: WCH
Install: BNSF Early to mid 2010s, Installed between 2015 - 2017
Left Signal
Bell: GS Type 1 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Invensys Rail
Base: Safetran
Install: BNSF Early to mid 2010s, Installed between 2015 - 2017
This crossing owned by BNSF Railway is an BNSF early to mid 2010s signal install with some reused parts from the former ATSF Install.
Camera
Sony Handycam FDR-AX53
Since I last filmed this crossing 3 and a half years ago, the close bell whichbwas a General Signals Type 2 Electronic Bell had been replaced with an General Signals Type 3 Electronic Bell. Everything else appears to be the same.
Amtrak California San Joaquins Train 711 northbound (eastbound dispatcher wise) passes through the Carpenter Road railrpad crossing on the BNSF Stockton Sub in Stockton, California.
Before Bell Change
youtu.be/LM7-Xx2E2Xg
Crossing Info
City: Stockton, California
Line/Crossing Owner: BNSF Railway
Line User: BNSF, Amtrak, UP
Bell Sequence: Ring till gates start rising
Right Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Invensys Rail
Base: WCH
Install: BNSF Early to mid 2010s, Installed between 2015 - 2017
Left Signal
Bell: GS Type 1 E-Bell
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Invensys Rail
Base: Safetran
Install: BNSF Early to mid 2010s, Installed between 2015 - 2017
This crossing owned by BNSF Railway is an BNSF early to mid 2010s signal install with some reused parts from the former ATSF Install.
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad Z-Train, intermodal stack train north (eastbound dispatcher wise) on the UP Sacramento Sub passes through the 2nd Avenue railroad crossing in Sacramento, California withba stop and then go as the head end of the train had to stop at X St due to its crossing there being damaged still at the time. A Sacramento Regional Transit light rail train also passed on the SACRT Blue Line.
ZLCTM
UP 2755
UP 7115
UP 6370
UP 8121
SACRT SRTD 105, 135 Siemens-Duewag U2a
Blue Line - Inbound
Crossing Info
Location: Sacramento, California
This crossing is owned by UPRR and SACRT. Bells ring through whole activation. This crossing is also a quiet zone.
Right Signal - UPRR
Bell: Safetran Type 2 E-Bell "Early NEG"
Lights: One 12 inch WCH 1st Gen LEDs & Three 12 inch WCH 2nd Gen/Miller Felpax LEDs retrofitted into Three 12x24 and One 12x20 inch Safetran Lights
Junction Box: Safetran
Gate Lights: Electro-Tech Gate LEDs
Gate Saver: NEG
Mechanism & Counterweight Arm: Safetran
Base: Safetran
Install Type: UP Early 2010s, Installed In 2011
Left Gate-less Signal - UPRR
Cantilever: Harmon
Lights: Four pairs of 12 inch Harmon Dotted LEDs retrofitted in Four pairs of 12x20 inch Harmon Lights
Junction Boxes: Harmon
Install Type: UP Early 2000s, Installed In 2001
Left Signal - SACRT
Bell: GS Type 1 E-Bell
Lights: Two pairs of 12 inch GS LEDs retrofitted in Two pairs of 12x24 inch Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Gate LEDs "Alstom-Aurora Design"
Gate Saver: GS
Mechanism & Counterweight Arms: WCH (New)
Base: WCH
Install Type: SACRT Early 2000s, Installed In 2001
Right Gate-less Signal - SACRT
Bell: GS Type 1 E-Bell
Lights: Two pairs of 12 inch Safetran Fading LEDs retrofitted in Two pairs of 12x24 inch GE/Harmon Lights
Junction Box: Harmon
Base: L&W
Install Type: SACRT Late 2000s, Installed In 2011
This crossing is an jointly owened mixed install crossing with the close side being owned by Union Pacific Railroad with the gated signal being an UP Early 2010s signal install with its right signals front left light and restripped gate being its changes. The gate-less cantilever is an UP Early 2000s signal install. The far side is owned by Sacramento Regional Transit with the gated signal being an SACRT early 2000s signal install with its gate, gate lights, mechanism, and counterweight arms changed. The right gate-less signal is an SACRT late 2000s signal install put here in the early 2010s with originally being bell-less and changes to its lights and light heads.
Camera
Sony Handycam FDR-AX53
Sacramento Regional Transit light rail trains on the SACRT Blue Line passes through the Franklin Boulevard railroad crossing in Sacramento, California south side near the boarder of Elk Grove.
SACRT SRTD 209, 232 CAF S/200
Blue Line - Inbound
SACRT SRTD 127, 129 Siemens-Duewag U2a
Blue Line - Outbound
Crossing Info
City: Sacramento California
Line/Crossing Owner: Sacramento Regional Transit
Line User: SACRT
Bell Sequence: Ring through whole activation
Right Shoulder Signal - GE Lyndsay Rail Cantilever
Bell: GS Type 2 E-Bell
Lights: 4 pairs of 12x24 GE Uniform Look LEDs/WCH Lights
Junction Boxes: WCH
- Gated Mast
Lights: 1 pair of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Whole Install: SACRT Mid 2010s, Installed 2015 (Pre Incomplete Install In 2014)
Median Signal - GE Lyndsay Rail Cantilever
Lights: 4 pairs of 12x24 GE Uniform Look LEDs/WCH Lights
Junction Boxes: WCH
- Gated Mast
Lights: 1 pair of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Whole Install: SACRT Mid 2010s, Installed 2015 (Pre Incomplete Install In 2014)
Left Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Dwarf Signal: Safetran Siemens Crossing Beacon
Lights: 2 pairs of 12x24 inch GE Uniform Look LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Shoulder Signal Left
Bell: GS Type 2 E-Bell
Lights: 4 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Median Signal 2
Lights: 4 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Right Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Dwarf Signal: Safetran Siemens Crossing Beacon
Lights: 2 pairs of 12x24 inch GE Uniform Look LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
This crossing owned by Sacramento Regional Transit is an SACRT mid 2010s signal install with gate amd gate light changes but same as original.
Camera
Sony Handycam FDR-AX53
After leaving West Sac, I luckily had enough time to make it back to the Sac Sub to get this train and given extra time because during this time, X St was still damaged at that crossing so the train stopped down there at X St as when I arrived, the headlights were already down the line. I had seen the train on the Stockton Live camera. Glad to have made it here for it.
BNSF Railway manifest freight train northbound (dispatcher wise eastbound) with an Executive SD70MAC Unit on the UP Sacramento Sub passes through the N Street railroad crossing in Sacramento, California.
BNSF 7508
BNSF 5046
BNSF 9499
BNSF 6106
BNSF 5895
Crossing Info
Sacramento, CA - Midtown
This crossing owned by UP is an quiet zone and bells ring through the whole activation.
Right Signal
Cantilever: Harmon
Lights: Four pairs of 12 inch Harmon Dotted LEDs retrofitted in Four pairs of 12x24 inch Harmon Lights
Junction Boxes: Harmon
Install Type: UP Early 2000s, Installed Between 1999 - 2002
- Gated Mast
Bell: NEG E-Bell
Lights: One pair of 12 inch General Electric Pixelated Look LEDs retrofitted in One pairs of 12x24 inch Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arm: Siemens
Base: Siemens
Install Type: UP Early 2020s, Installed 2022
Left Signal
Cantilever: Harmon
Lights: Two pairs of 12 inch Harmon Dotted LEDs retrofitted in Two pairs of 12x24 inch Harmon Lights
Junction Boxes: Harmon
Install Type: UP Early 2000s, Installed Between 1999 - 2002
- Gated Mast
Bell: NEG E-Bell
Lights: One pair of 12 inch General Electric Pixelated Look LEDs retrofitted in One pairs of 12x24 inch Safetran Lights
Junction Box: Safetran
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arm: Siemens
Base: Siemens
Install Type: UP Early 2020s, Installed 2022
This crossing owned and maintained by Union Pacific Railroad is an mixed install with the cantilevers being a UP Early 2000s signal install and the gated masts being a UP Early 2020s signal install.
Camera
Sony Handycam FDR-AX53
After the Flyer worked the Fresno Sub and P&G Yard, they returned back to the Westgate Yard and while so, they aprked their power up against the Sierra Northern Railways power and coupled with it sitting in the yard which is interesting to see.
Union Pacific Railroad Florin Flyer Local freight train as a light power move passes through the Delta Lane railroad crossing on the UP Holland Branch in West Sacramento, California.
YSR62R
UP 637
UPY 651
SERA 6223
SERA 133
Crossing Info
City: West Sacramento, CA
This crossing is owned by UP and is an UP Early 2020s signal install installed in 2022. This crossing is a horn zone and bells ring till gates start rising.
Right Signal
Bell: NEG E-Bell
Lights: Two pairs of 12 inch GE Pixilated Look/Dotted LEDs retrofitted inside Two pairs of 12x24 inch Safetran logo Siemens Lights
Junction Box/Brackets: Safetran logo Siemens
Gate Lights: NEG Clear Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install Type/Installed: UP Early 2020s, Installed in 2022
Left Signal
Bell: NEG E-Bell
Lights: Three pairs of 12 inch GE Pixilated Look/Dotted LEDs retrofitted inside Three pairs of 12x24 inch Safetran logo Siemens Lights
Junction Box/Brackets: Safetran logo Siemens
Gate Lights: NEG Clear Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install Type/Installed: UP Early 2020s, Installed in 2022
Camera
Sony Handycam FDR-AX53
After the Amtrak Siemens Special train had got through, I moved to 28th St here for Amtrak 5 which I knew had the phase 1 50th Anniversary unit leading it west and afterwards surprisingly, a Union Pacific work equipment train came around the corner that was headed east. Also, the BNSF H-POVOSTO manifest was tied down here at the 28th St Martinez Sub 3rd track and had a CPKC KCS Unit second from the head end in its consist. The BNSF train did not depart this day or atleast till the evening.
Amtrak 161 50th Anniversary unit leading the California Zephyr westbound right before an Union Pacific Railroad work train eastbound passimg through the 28th Street railroad crossing on the UP Martinez Sub in Sacramento, California.
Amtrak Train 5
AMTK 161 phase 1 livery
AMTK 83
Work Train
UP 6692
BNSF H-PROVOSTO
BNSF 5133
KCS (CPKC) 4589
BNSF 3850
Crossing Info
Sacramento, CA
This crossing ownes by Union Pacific is a quiet zone and bells ring till gates start rising.
Right Signal
Cantilever: GE/Lyndsay Rail
Bell: WCH 0777 Electronic Bell "Type 4"
Lights: Three pairs of 12 inch General Electric Pixilated Look LEDs retrofitted in Overhead - Two pairs of 12x24 inch GE/Harmon Lights, Mast - One pair of 12x24 inch Safetran Lights
Junction Boxes: Mast - Safetran & Overhead - Harmon
- Gated Mast
Lights: One pair of 12 inch General Electric Pixelated Look LEDs retrofitted in One pair of 12x24 inch Harmon Lights
Junction Box: Harmon
Gate Lights: NEG Clear LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arm: Siemens
Base: Siemens
Install Type: UP Late 2010s, Installed 2017
Left Signal
Cantilever: GE/Lyndsay Rail
Bell: WCH 0777 Electronic Bell "Type 4"
Lights: Three pairs of 12 inch General Electric Pixelated Look LEDs retrofitted in Three pairs of 12x24 inch GE/Harmon Lights
Junction Boxes: Harmon
- Gated Mast
Lights: One 12 inch General Electric Pixelated Look LEDs & One 12 inch WCH 1st Gen LEDs retrofitted One 12x24 inch Safetran Lights & One 12x24 inch Safetran Hawker Siddley Light
Junction Box: Safetran
Gate Lights: NEG Clear LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arm: Siemens With Safetran Logo
Base: Siemens
Install Type: UP Late 2010s, Installed 2018
This crossing owned by Union Pacific is an UP Late 2010s signal type install with changes a gate and a light.
Camera
Sony Handycam FDR-AX53
Amtrak train 960 westbound lead by an Cabbage NPCU ex-F40PH as a power move with 2 brand new Amtrak ALC-42 locomotives on the UP Martinez Sub passing through the 20th Street railroad crossing in Sacramento, California afyer picking them up from Siemens Mobility.
AMTK 90278
AMTK 206
AMTK 356
AMTK 354
Crossing Info
Sacramento, CA
This crossing owned by UP is a quiet zone and bells ring till gates start rising.
Right Signal
Bell: WCH Type 0777 E-Bell "Type 3"
Lights: Two pairs of 12 inch Miller Felpax LEDs "WCH 2nd Generation LEDs" retrofitted in Two pairs of 12x24 inch WCH Lights
Junction Box: WCH
Brackets: WCH
Gate Lights: Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: UP Late 2000s, Installed Between 2009 - 2010
Left Signal
Bell: WCH 0777 Electronic Bell "Type 1.5"
Lights: Two pairs of 12 inch Miller Felpax LEDs "WCH 2nd Generation LEDs" retrofitted in Two pairs of 12x24 inch WCH Lights
Junction Box: WCH
Gate Lights: NEG Gate LEDs "Alstom-Aurora Style"
Mechanism/Counterweight Arms: WCH
Base: WCH
Install Type: UP Late 2000s, Installed Between 2009 - 2010
crossing also has a yellow flasher signal.
This crossing owned by Union Pacific is an UP late 2000s signal install installed in 2010 with minor gate changes.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
The Red Top Road railroad crossing located on the California Northern Railroad shortline's Lombard Subdivision in Fairfield, California. This crossing consists of its original SP equipment from the 60s and 70s with some modernizations. It may not have its original mechanical bells anymore but it has a nice combo of a Siemens High Pitch E-Bell and strong sounding GS Type 1 E-Bell. The signals also feature 8 inch WCH 2nd Gen LEDs that at first I knew they were until when I filmed them in Woodland at CO Rd 18 until I seen somewhere mention that the CFNR uses Westinghouse LEDs so I did call them that for the train crossing video of this crossing but I can't find any other proof to continue calling them so its best to call them WCH 2nd Gen LEDs by its design even though many LEDs now share the same design and are from different manufacturers.
Crossing Active
youtu.be/NhNcbh_atUk?si=2Gc8yy67t41ghXn6
Crossing Info
City: Fairfield, CA
Crossing/Line Owner: California Northern Railroad
Line User: CFNR
Bell Sequence: Ring till gates start rising
This crossing owned by the CFNR is a SP 1960s - 70s install with its bells, lights, gates, and gate lights changed from the original SP equipment.
1st Signal
Bell: Siemens High Pitch E-Bell
Lights: 2 pairs of 8 inch Westinghouse or 8 inch WCH 2nd Gen LEDs inserted in 2 pairs of 8x20 inch US&S Lights
Junction Box: US&S
Gate Lights: Unknown 4 inch Incandescent Lights
Mechanism/Counterweight Arm: WABCO AL-70 Triangular Arm
Base: US&S
Install: SP 1960s - 1970s
2nd Signal
Bell: GS Type 1 E-Bell
Lights: 2 pairs of 8 inch Westinghouse or 8 inch WCH 2nd Gen LEDs inserted in 2 pairs of 8x20 inch US&S Lights
Junction Box: US&S
Gate Lights: Unknown 4 inch Incandescent Lights
Mechanism/Counterweight Arm: WABCO AL-70 Triangular Arm
Base: US&S
Install: SP 1960s - 1970s
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad Z-Train, Intermodal Stack Train northbound (dispatcher wise eastbound) passes through the J Street railroad crossing on the UP Sacramento Sub in Sacramento, California. Caught a tail end of the light rail in the approach view.
ZLCTM
UP 8795
UP 7875
UP 6786
UP 8452
Crossing Info
Sacramento, CA
This crossing owned by UP is a quiet zone and bells ring through whole activation.
Right Signal
Cantilever: Lincoln Industries
Lights: Four pairs of 12 inch Progress Rail LEDs retrofitted in Four pairs of 12x24 inch Progress Rail Retrofit Frames For LEDs
Junction Boxes: Progress Rail
- Gated Mast
Bell: WCH 0777 Electronic Bell "Type 1.5"
Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights
Junction Box: WRRS (WCH)
Gate Lights: Electro-Tech Gate LEDs
Mschanism/Counterweight Arms: WCH
Base: WCH
Install Type: UP Mid 2000s, Installed Between 2005 - 2006
Left Signal
Cantilever: Lincoln Industries
Lights: Two pairs of 12 inch Progress Rail LEDs retrofitted in Two pairs of 12x24 inch Progress Rail Retrofit Frames For LEDs
Junction Boxes: Progress Rail
- Gated Mast
Bell: WCH 0777 Electronic Bell "Type 3"
Lights: One pair of 12 inch WCH 1st Generation LEDs retrofitted in One pair of 12x24 inch WCH Lights
Junction Box: WRRS (WCH)
Gate Lights: Electro-Tech Gate LEDs
Mschanism/Counterweight Arms: WCH
Base: WCH
Install Type: UP Mid 2000s, Installed Between 2005 - 2006
This crossing owned by Union Pacific is an UP mid 2000s signal build install with changes to its gates and gate lights.
Camera
Sony Handycam FDR-AX53
I got a clip at the very beginning across the Sacramento River of the UP Florin Flyer and Sierra Northern parked in the West Sacramento Westgate Yard. After seeing the train depart south from the Central Pacific Depot at the California State Railroad Museum, I went to setup here at the Q Street Pedestrian Crossing as a month or two before I filmed this, both the GS Type 2 E-Bell and the WRRS Mechanical Bell were both replaced with a brand new GS Type 3 Electronic Bell and a Safetran Hybrid Bell reused from Capitol Mall replaced the WRRS Bell which was a surprise and also, this brings an Safetran Hybrid Bell crossing back to the Sacramento area.
Sacramento Southern Railroad Excursion Train north passes through the Q Street Pedestrian Railroad Crossing on the SSRR Line in Sacramento, California.
Previous Bell Pair Combo
youtu.be/_Q85T3FdaVk?si=U5UHV-q4irRhwet_
SSRR 2030
Crossing Info
City: Sacramento California
Line/Crossing Owner: Sacramento Southern Railroad & California State Railroad Museum
Line User: SSRR
Right Signal
Bell: Safetran Hybrid Bell "New"
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Base: Fabricated Metals
Install: SSRR Early 2000s, Installed between 2002 - 2003
Left Signal
Bell: GS Type 3 E-Bell *New*
Lights: 2 pairs of 12x24 inch Dialight Ball LEDs/Safetran Lights
Junction Box: Safetran
Base: Fabricated Metals
Install: SSRR Early 2000s, Installed between 2002 - 2003
This crossing owned by the SSRR is an SSRR Early 2000s signal install with its bells changed.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
This was the first time I filmed and seen Sacramento Northern 401 running at the California State Railroad Museum on the Sacramento Southern Railroad Line. Unfortunately, this day it didn't lead the Tuesday ran train so I haven't filmed it out on the railroad still before. The train also had just departed south on the SSRR Line.
Camera
Somy Handycam FDR-AX53
Union Pacific Railroad Florin Flyer Local freight train as a light power move coming off the UP Martinez Sub onto the SERA Washington UP Connection Track passes through the E Street railroad crossing in West Sacramento, California.
YSR62R
UP 637
UPY 651
Crossing Info
City: West Sacramento CA
Crossing/Line Owner: Sierra Northern
Line User: Union Pacific
Bell Sequence: Ring till gates start tising
Right Signal
Bell: GS Type 3 E-Bell
Lights: 2 pairs of 12x20 inch WCH Incandescent Lights
Junction Box: WRRS
Gate Lights: Electro-Tech LEDs
Mechanism/Counterweight Arms: WCH with WRRS counterweight Arms
Base: Safetran
Install Type: Yolo Shortline late 1980s, Installed Between 1985 - 1990
Left Signal
Bell: WCH E-Bell "Type 2"
Lights: 2 pairs of 12 inch GE/Harmon Fading LEDs retrofitted in Two pairs of 12x24 inch US&S Lights
Junction Boxes: Harmon
Gate Lights: NEG Gate LEDs
Mechanism/Counterweight Arm: Siemens
Base: Progress Rail
Install Type: Sierra Northern Early 2020s, Installed 2022
This crossing owned by the Sierra Northern Railway is an mixed install with the right signal being an Yolo Shortline late 1980s signal install with its bell, gates, and gate lights changed. The left signal is an Sierra Northern Railway early 2020s signal install with also Reused parts from the previous 1970s Yolo Shortline install.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
While in Midtown, I got this BNSF train. Take note that this was filmed while X St was still damaged so freight trains were stopping at X St before passing and then passing W St. You can also see the engineer raising his arms to a rude driver that likely went under the crossing gate when the train started moving.
BNSF Railway manifest freight train northbound (eastbound dispatcher wise) with also an H1 livery unit passes through the W Street railroad crossing on the UP Sacramento Sub and an outbound Sacramento Regional Transit light rail on the SACRT Blue Line in Sacramento, California.
BNSF 6433
BNSF 8578
BNSF 1039
BNSF 5475
BNSF 8506 (DPU)
BNSF 4116 (DPU)
SACRT SRTD 101, 114 Siemens-Duewag U2a
Blue Line - Outbound
Crossing Info
Sacramento, CA
This crossing owned by UP and SACRT is an quiet zone and bells ring through whole activation.
Gate-less Pedestrian Signal (SACRT)
Bell: GS Type 2 E-Bell
Lights: 2 pairs of 12x24 inch GS LEDs/Harmon Lights
Junction Box: Harmon
Base: WCH
Install Type: SACRT Early 2000s, Installed: 2001
Right Signal (UPRR) - Harmon Cantilever
Lights: 3 pairs of 12x24 inch Harmon Dotted LEDs/Harmon Lights
Junction Boxes: Harmon
Install Type: UP Early 2000s, Installed: 200
- Gated Mast
Bell: Safetran Type 2 E-Bell
Lights: 1 pair of 12x24 inch Miller Felpax's WCH 2nd Gen LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arm: Safetran
Base: Safetran
Install Type: UP Early 2010s, Installed: 2010
Left Gated Shoulder Signal (UPRR)
Bell: Safetran Type 2 E-Bell
Lights: 2 pairs of 12x24 inch Miller Felpax's WCH 2nd Gen LEDs/Safetran Lights
Junction Box: Safetran
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arm: Safetran
Base: Safetran
Install Type: UP Early 2010s, Installed: 2010
This crossing is a jointly owned mixed install crossing with the signals on the far side of the tracks being owned by Union Pacific and the gateless signal being owned by Sacramento Regional Transit. The cantilever is an UP late 1990s to early 2000s signal install put here in the early 2000s. Its gated mast and right gated mast signals are an UP Early 2010s signal install with its gates and gate lights changed from the originals. The gateless signal is an SACRT Early 2000s signal install.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
Sacramento Regional Transit light rail trains on the SACRT Blue Line pass through the Center Pkwy railroad crossing in Sacramento, California south side near Elk Grove and arriving and departing the Center Parkway Station.
SACRT SRTD 223, 240 CAF S/200
G
Blue Line - Inbound
SACRT SRTD 232, 209 CAF S/200
Blue Line - Outbound
Crossing Info
City: Sacramento California
Train Line/Crossing Owner: Sacramento Regional Transit
Line User: SACRT
Bell Sequence: Ring through whole activation
Right Shoulder Signal - GE Lyndsay Rail Cantilever With Gate Attached
Bell: GS Type 2 E-Bell
Lights: 6 pairs of 12x24 inch GE Uniform Look LEDs/WCH Lights
Junction Boxes: WCH
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Attached Mast Mechanism/Counterweight Arms: Siemens
Install: SACRT Mid 2010s, Installed 2015 (Incomplete in 2014 with mast just install)
Median Signal
Lights: 2 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Left Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Safetran/Siemens Crossing Beacon 5 inch Light
Lights: 2 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Left Shoulder Signal
Bell: GS Type 2 E-Bell
Lights: 4 pairs, Main - 3 of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens & 1 12x24 inch Harmon Fading LEDs/Harmon Light, Side - 2 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Median Signal 2
Lights: 4 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
Right Gate-less Pedestrian Signal
Bell: GS Type 2 E-Bell
Safetran/Siemens Crossing Beacon 5 inch Light
Lights: 2 pairs of 12x24 inch GE Harmon Fading LEDs/Safetran Lights by Siemens
Junction Box: Safetran by Siemens
Base: Siemens
Install: SACRT Mid 2010s, Installed 2015
This crossing owned by SACRT is an SACRT Mid 2010s signal install with some gate and some gate light changes indentical to originals.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
Union Pacific Railroad LRS59 Stockton Turn Local freight train northbound on the UP Fresno Sub passes through the Pine Street railroad crossing in Lodi, California.
LRS59
UP 9916
UP 9926
UP 4560
Crossing Info
City: Lodi, CA
Crossing/Line Owner: Union Pacific
Line User: UP, BNSF, AMTK
Bell Sequence: Ring through whole activation this side & till gates start rising other side.
Right Signal - 70s Harmon Cantilever
Bell: WCH Mechanical Bell - 2nd Gen
Lights: 4 pairs of 12x25 inch Electro-Tech LEDs/Harmon Lights (1970s)
Junction Boxes: Harmon
- Gated Mast Short
Gate Lights: Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: Harmon
Base: Safetran
Install Type: SP 1970s, Installed Between 1969 - 1978
Left Pedestrian Gate-less Signal
Bell: WCH Mechanical Bell - 1st Gen
Lights: 1 pair of single direction 12x24 inch Electro-Tech LEDs/Harmon Light (70s Style) and WCH Light
Base: WABCO
Install Type: SP 1970s, Installed Between 1969 - 1978
Left Signal - 70s Harmon Cantilever
Bell: WCH E-Bell "Type 1.5"
Lights: 12x24 inch Electro-Tech LEDs/Harmon Light (1970s)
Junction Boxes: Harmon
- Gated Mast Short
Gate Lights: Alstom-Aurora LEDs
Mechanism/Counterweight Arms: Harmon
Base: Safetran
Install Type: SP 1970s, Installed Between 1969 - 1978
Right Gate-less Signal
Bell: GS Type 3 E-Bell
Lights: 1 pair of 12x24 inch Electro-Tech LEDs/Harmon Light and WCH Light (1 Directional)
Base: WABCO
Install Type: SP 1970s, Installed Between 1969 - 1978
This crossing as a whole is an SP late 1960s to 1970s signal build install with changes to most of its bell, lights, gates, and gate barriers.
Camera
Sony Handycam FDR-AX53
Union Pacific Railroad southbound manifest freight train passes through the East Lodi Avenue railroad crossing on the UP Fresno Sub in Lodi, California. At the end, you can see a tied down tie gang maintainance of way machinery as around this time, UP was doing tie replacements on this line.
UP 2672
UP 7947
UP 5730
UP 6904 (DPU)
UP 5963 (DPU)
Crossing Info
City/State: Lodi, California
Crossing/Line Owner and Maintainer: Union Pacific Railroad
Line User: UP, BNSF, AMTK
Bell Sequence: Ring till through whole activation
Right Signal - 70s Harmon Cantilever
Bell: WCH E-Bell "Type 2"
Lights: 4 pairs of 12x24 inch Electro-Tech LEDs/Harmon Lights (70s Style)
Junction Boxes: Harmon (70s)
- Short Gated Mast
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install Type: SP 1970s, installed between 1971 & 1980
Left Signal - 70s Harmon Cantilever
Bell: NEG E-Bell
Lights: 4 pairs of 12x24 inch Electro-Tech LEDs/Harmon Lights (70s)
Junction Boxes: Harmon
- Short Gated Mast
Gate Lights: NEG Clear Alstom-Aurora Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: Safetran
Install Type: SP 1970s, installed between 1971 & 1980
This crossing owned by Union Pacific is an SP era 1970s signal install with bells, lights, gates and gate lights changed from the original mechanical and incandescents.
Camera
Sony Handycam FDR-AX53
Sony Cybershot RX10 IV
After I decided to stop chasing the ST&E since their crossings were mostly turned off and plus the worker incident I left Stockton after hearing the Z-Train wasn't far, I came and setup here on Hwy 12 since I hadm't filmed this crossing since its close gated Miller Felpax WCH Gate LEDs were replaced with Electro-Tech Gate LEDs a couple of months before I filmed this video.
Union Pacific Railroad Z-Train, intermodal stack train northbound dispatcher wise eastbound passes through the Highway 12 railroad crossing on the UP Sacramento Sub in Lodi, California.
ZLCTM
UP 8826
UP 6389
UP 5519
UP 2557
Crossing Info
City:Lodi, California
Crossing/Line Owner: Union Pacific
Line User: BNSF & UP
Bell Sequence: Ring through whole activation
Right Signal - Modern Industries Cantilever
Bell: NEG E-Bell
Lights: 4 pairs of 12x24 inch WCH 1st Gen Red LEDs/WCH Lights
Junction Boxes: WRRS
Install: WP 1980s installed between 1980 - 1982
- Gated Mast
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install (Gated Mast): UP Mid to Late 2000s, installed between 2005 - 2009
Left Signal - Walpar Cantilever
Bell: Safetran Type 2 E-Bell
Lights: 4 pairs of 12x24 inch WCH 1st Gen Red LEDs/WCH Lights
Junction Boxes: WRRS
Install: WP 1970s, installed between 1970 - 1975
- Gated Mast
Gate Lights: Electro-Tech Gate LEDs
Mechanism/Counterweight Arms: WCH
Base: WCH
Install (Gated Mast): UP 2000s installed between 2005 - 2009
This crossing owned by Union Pacific is an mixed install with the left cantilever being an WP 1970s signal install with its bell, lights, and light heads changed. The right cantilever is an WP 1980s signal install with its bell, lights, and light heads changed. The gated masts are UP Late 2000s signal installs with a set of gate lights changed.
This crossing also has two yellow flasher advance warning signals.
Camera
Sony Handycam FDR-AX53
After catching the UP Auto, I came back to the DT&E Lime to wait on them to finish switching in the UP Interchange Old WP Yard just to the west of this crossing. While waiting, I ran into an unusual railroad worker working for the ST&E that ended up ticking me off which lead to when the bus blocked my view you can here me talking as I got fustrated as I was already annoyed by the worker on top of that, a crossing that isn't ome you can go to and just easily get a train pretty much also ticked me off when the bus blocked my view but mainly the railroad worker.
The ST&E Railroad worker accused me of doing a terrorist operation so I got into an arguement with him and he acted as if he doesn't know what railfanning is. Out of all places, terrorist want something to do with Stockton lol. He also didn't like me filming and asking me where I'm from and hinting like he wanted me to go and first of all, you don't own the property beyond the tracks and I'm in a neighborhood, you don't know where I live and if I live in this neighborhood or not trying to tell me where I can't film I have the right to film whatever in public. He also accused me of filming with a tfipod down at the ST&E Yard and I told him I don't know whoever you saw, but that wasn't me because I went nowhere near there. So he just returned to his truck and sat and watched me. You can see part of it in this video mainly towards the end.
Stockton Terminal and Eastern Railroad shortline local freight train shoves past the North Airport Way railroad crossing on the ST&E Line street running down East Roosevelt Street in Stockton, California.
ST&E 1050
Crossing Info
City: Stockton, CA
Crossing Owner: ST&E
Crossing User: ST&E
Bell Sequence(s): Ring when gate lowers and rises - close, ring through whole activation - far
Right Signal
Bell: Safetran Mechanical Bell
Cantilever: Safetran 1980s Cantilever
Lights: 5 pairs of 12 inch Dialight 433 Low Wattage LEDs inserted in 5 pairs of 12x24 inch Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Safetran
Base: Safetran
Install: ST&E 1980s to early 1990s signal install, Installed between 1985 - 1993
Left Signal
Bell: Safetran Mechanical Bell
Cantilever: Safetran 1980s Cantilever
Lights: 5 pairs of 12 inch Dialight 433 Low Wattage LEDs inserted in 5 pairs of 12x24 inch Safetran Lights
Junction Boxes: Safetran
- Gated Mast
Gate Lights: RECO Gate LEDs
Mechanism/Counterweight Arms: Siemens
Base: Safetran
Install: ST&E 1980s to early 1990s signal install, Installed between 1985 - 1993
This crossing owned by ST&E is an 1980s to early 1990s signal install with equipment that was changed from signal installs original being to its lights, gates, and far mechanism and its counterweight arms.
Camera
Sony Handycam FDR-AX53


