ComfyUI Workflow Blog
Z-Image Turbo 2026: Next Level LoRA Node & Auto Prompts
updated
It does not just remove the background. It splits your image into 8 perfect transparent layers automatically. I separated the background and the open book and the Monkey King and even the text. No need to select anything. You do not even have to type a prompt. Just upload and the model gives you every object in its own layer.
In this video I will show you the full workflow. I added switches for GGUF and FP8 models so it works on any GPU. I also added an auto prompt feature using Qwen VL so you save time. Stop thinking. Let's build it.
Workflow Download
* Get the Workflow JSON: aistudynow.com/how-to-use-qwen-image-layered-model-the-best-alternative-to-photoshop
About This Video This workflow uses the new Qwen Image Layered model to automate layer separation. It works better than manual masking in Photoshop. I tested it with complex images like a Monkey King 3D scene and a Halloween banner. The model separates transparency perfectly. I also show you how to use GGUF quantization so you can run this on lower VRAM cards. If you are doing motion graphics or 2.5D animation this tool gives you control over every tiny element.
#comfyui #qwenimagelayered #aiworkflow #lowvram
In this video, I show you exactly how to download and install UltraFlux VAE. When you use this file, your images look sharp and the 4K details come out clearly. You do not need any complex high-res fix steps that take up extra time and VRAM. This method is free and it works right away.
I tested this myself on Z Image Turbo and the standard Flux workflow. The difference is huge. The skin texture, the hair, and small objects like phones look much better
Files You Need To Download:
VAE: huggingface.co/Owen777/UltraFlux-v1/tree/main/vae
Workflows: aistudynow.com/ultraflux-vae-download-and-install-guide-for-comfyui-users
In this video, I will show you how to set up the new Z-Image Turbo ControlNet 2.1 in ComfyUI. I have built two custom workflows for you. One is a powerhouse ControlNet setup with the new Depth Anything V3, and the other is a dedicated Inpainting workflow that finally fixes those glowing edges.
I will walk you through the installation, the best settings for speed, and how to run this on low VRAM GPUs without crashing your system.
Files You Need To Download:
My Custom Workflows (JSON): aistudynow.com/how-to-use-z-image-turbo-controlnet-2-1-in-comfyui
Workflow Details:
ControlNet Union 2.1: One single file that handles Canny, Depth, Pose, and Inpainting.
Differential Diffusion: This node is critical for inpainting. It smooths out the transition between the mask and the original image so you don't get artifacts.
6+3 Sampler Trick: I use two samplers (6 steps + 3 steps) to get sharp details while keeping the generation speed incredibly fast.
#ComfyUI #ZImageTurbo #StableDiffusion
In this workflow you will see how I set up the One to All model, how I use pose from a driving video, and how I keep the face and hands clean during animation.
First, I show the files you have to download like YOLOv10m; whole body pose ONNX, the FP8 One to All model, and the Wan text encoder and VAE. Then we open the JSON in Comfy UI, connect the pose detection node, the reference image, and the WanVideo nodes.
I also show an extended video section where you can turn a small clip into a longer animation, and an auto prompt setup with a vision model so it can write a detailed prompt from your reference image. In the end we render a clip at 1080 by 1440 at 30 fps and you can see how it holds up against Wan2.2 Animate.
If this workflow helps you, you can like the video, drop a comment with your GPU, and subscribe for more ComfyUI animation setups.
Workflow: aistudynow.com/one-to-all-animation-comfyui-workflow
#ComfyUI #OneToAllAnimation #wanvideo
I walk through how I install the custom node, download the LongCat model from Hugging Face, fix the common errors, and get the workflow running inside ComfyUI.
After that I try simple edits that we actually use every day: replace a girl with a man, add a new person in the background, move the same woman into a cafe, add clean text for a thumbnail, and remove people or flowers without breaking the background. Then I compare these results with Nano Banana Pro so you can see where each one is stronger.
If you are using ComfyUI long cat image edit or planning long cat style image to video workflows, this gives you a nice base setup you can build on.
Links and files are listed below in the description.
Github: github.com/sooxt98/comfyui_longcat_image/tree/main
Workflow: github.com/sooxt98/comfyui_longcat_image/blob/main/example_workflow_edit.json
models huggingface.co/meituan-longcat/LongCat-Image-Edit/tree/main
I test both the FP8 and BF16 versions on real prompts like three anime girls in one frame, e commerce storyboards, a movie poster, a fashion portrait, a comic page, and a close up dragon scene. You can see where FP8 is enough and when BF16 gives a bit more control on tricky layouts.
If you are using ComfyUI for product shots, posters, comics or fantasy art and you want a clean AIO setup, this video will help you understand how I run Z Image Turbo in my own workflow. If it helps you, like the video, subscribe, and tell me in the comments which prompt you want me to try next.
Workflow: aistudynow.com/z-image-turbo-comfyui-aio-workflow-guide
Then I drop in a few test images and try pose, depth, canny and HED one by one. You will see how each option changes the result, and how the strength slider can keep the same pose or let the image change more. I am running this on a normal GPU, so if your card is not very powerful, this workflow will still help you.
If you try it later, tell me in the comments what settings worked for you. If you like this kind of ComfyUI and Z Image Turbo content, you can subscribe and I will keep making more videos like this.
Workflow: aistudynow.com/z-image-turbo-comfyui-pose-depth-edge-control
Workflows: aistudynow.com/hunyuan-video-1-5-comfyui-workflow-4-step-lightx2v-upscale-to-1080p
#hunyuanvideo #comfyui #hunyuanvideo15 #lightx2v
We start from a fresh ComfyUI setup. You have to update ComfyUI and your custom nodes first, then I show you where to drop each model file so the graph loads without any red errors. After that I walk you through the main branches: normal text to image, auto prompt, LoRA, GGUF, upscaler and the final color fix pass.
I also show you how I balance speed and quality. How many steps I use, how I keep the face and clothes stable when LoRA is on, and when it is worth turning on the upscale branch so your final image looks sharp instead of soft. I am doing everything on a normal single GPU PC, so if you have 8 to 12 GB VRAM you can still follow this workflow.
If this video helps you fix your Z Image Turbo results, tell me in the comments which GPU you are using and what workflow you want next. If you like this kind of ComfyUI content, please like the video and subscribe. It really helps.
File You Need To Download: Z Image Turbo base model, GGUF model builds, VAE, text encoder and the LoRA packs I use in the video. All download links are below.
After that, I walk through the four workflows I made, one by one, in a simple way:
A text to image Flux 2 workflow where you can type your own prompt or let the auto prompt write it for you
A single image edit workflow where you can change things like clothes and colors but keep the same person
A two image setup where you take the face from one image and the T shirt or logo from another image
A multi image workflow where you can use many reference images together and get one final clean result
During the video I show the exact settings I tried for FP8 and Q4 GGUF, how I switch between the branches inside the same graph, how I pick safe resolutions for 2K images, and how I keep the output close to the reference photos even on a GPU with low VRAM.
If you are new to Flux 2 in ComfyUI or you just do not want to waste time testing random settings, this video will help you get a working setup faster.
If this tutorial helps you, tell me in the comments which GPU you are using and how Flux 2 is running for you. And if you like this kind of ComfyUI workflow content, please hit like and subscribe so you do not miss the next video.
Workflows: aistudynow.com/flux-2-comfyui-workflows-10-images-gguf-low-vram-guide
You have to put the Wan 2.2 VAE, UMT5 text encoder, main OVI model and MMAudio files in the correct ComfyUI folders first. Then I open the OVI Engine Loader in the workflow and walk through the settings step by step. You see how I set resolution, frames and audio length for a real 10 second clip, how I write prompts with speech tags and background sound, and how I switch from text to video to image to video inside the same graph.
I also test 50, 30, 20 and 10 steps on low VRAM settings with a LoRA, so you can copy the CFG and step values that work on mid range GPUs. If this ComfyUI OVI video helps you, you can like, comment with your GPU, and subscribe for more ComfyUI OVI tutorials.
Workflow: aistudynow.com/comfyui-ovi-workflow-guide-clean-10s-video-on-low-vram
#comfyuiovi #ovi11b #comfyui #aivideo #comfyuitutorial
What you’ll learn
You have to update ComfyUI and install missing custom nodes, then reload.
How Wan 2.1 VACE handles motion and light, and Phantom keeps the same face and outfit.
Two motion options: draw a path with Spline Editor or use a short motion capture clip.
My demo settings
832 x 480, 97 frames, 24 FPS
Low VRAM tip: try 81 frames and 16 FPS
LoRA: CausVid and T2V Extract, 12 steps, CFG 2.5
Scheduler: Beta 57 if you have it, otherwise default Beta
Files You Need To Download
Wan 2.1 VACE base model
Phantom V2 model
CausVid LoRA
T2V Extract LoRA
Put base models in: ComfyUI/models/diffusion_models
Put LoRA files in: ComfyUI/models/lora
Workflow: aistudynow.com/wan-vace-advanced-workflow-how-to-keep-faces-clothes-backgrounds-consistent
#ComfyUI #WanVACE #PhantomV2
First I upload my workflow and explain how ChronoEdit works. It does not edit in one shot. It makes a tiny video from your image and instruction. Then we take the last frame as the final image. This keeps the lighting, pose, and colour stable and it looks natural.
Then I put the same test inside the Qwen Image Edit workflow. In some cases Qwen shows better fine details. In other cases ChronoEdit looks more realistic because the lighting and reflections match the scene. I show both side by side so you can decide what fits your work.
#ChronoEdit #ComfyUI #QwenImageEdit
Workflows= aistudynow.com/chronoedit-comfyui-workflow-compare-with-qwen-image-edit-2509
What you will learn
Install and load LongCat in ComfyUI the simple way.
Text to video, image to video, and video continuation in one workflow.
How I keep smooth motion and stable frames for longer clips.
Low VRAM tips that stop crashes and keep the render running.
Why LongCat
LongCat-Video is a new open source model for long videos. It supports text to video, image to video, and continuation in one model. It is designed for minutes long videos with efficient generation, so you can keep quality and save time. I use it here inside ComfyUI. arXiv+2Hugging Face+2
My workflow path
Start with a short test clip.
Lock the look.
Extend the video with continuation so the story stays the same across shots.
Export at 720p 30 fps first. If your PC is fine, go higher later. arXiv
Low VRAM tips
Reduce preview size during testing.
Keep resolution near 720p for long runs.
Clear unused caches between renders.
If you still hit limits, render in parts and stitch.
File You Need To Download
LongCat-Video weights on Hugging Face. Save them to your model folder. Hugging Face
ComfyUI latest build.
FFmpeg for video export.
Workflow: aistudynow.com/comfyui-longcat-workflow-make-very-long-video-on-low-vram
#LongCat #ComfyUI #AIVideo
But when I looked closely, the armor edge in my clip had split into two.
It looked like a ghost reflection, like the model could not decide which edge was real.
That’s when I started testing everything again.
I found out FlashVSR is not just an upscaler, it’s a video restoration model.
It rebuilds lost details frame by frame.
But the problem is most versions inside ComfyUI don’t have LCSA.
That’s why we get that reflection problem in some videos.
So in this video, I’ll show you the exact one step that fixes it.
Just divide your video resolution by 2, run it through FlashVSR, and then upscale it back to 4K using SeedVR2.
That’s it. The ghost reflection is gone and the result looks clean and stable.
I’ll go through everything step by step — how I built the workflow, what settings I used, and how you can get the same result even on a low VRAM GPU.
When you see the final clip, it looks naturally sharp and realistic, like it was actually shot in 4K.
If your video looks unclear, has ghost lines, or flicker between frames, this will fix it.
FlashVSR restores the detail, and SeedVR2 does the final upscale.
Together, they make your video look like new again.
Watch the full video till the end, I’ll show you side-by-side results and the full workflow you can try yourself.
Files You Need To Download:
Comfyui Workflow: aistudynow.com/flashvsr-in-comfyui-1-step-to-4k-upscale-video-no-ghost-lines
1️⃣ Wan2_1-T2V-1_3B_FlashVSR_fp32.safetensors
2️⃣ Wan2_1_FlashVSR_LQ_proj_model_bf16.safetensors
📂 Save both inside ComfyUI/models/diffusion_models/
3️⃣ Wan2_1_FlashVSR_TCDecoder_fp32.safetensors
📂 Save this one in ComfyUI/models/vae/
Then restart ComfyUI once all files are added.
If this video helped you or you learned something new, hit Like and Subscribe so you don’t miss the next tutorial.
What you will learn
• SeC video masking for a clean, stable subject
• Continue Motion loop to extend clips
• When to use detail enhancer vs low-noise upscaler
• Simple background on or off with node connects
• LoRA ranks for low VRAM and steady identity
Files You Need To Download
• WAN 2.2 Animate 14B FP8 V2
• U-N T5-XXL FP16 (same as older WAN 2.2)
• Same VAE from your older WAN 2.2 setup
• SeC Video Segment model (SEG 4B FP16 or FP8)
• Pose and face detection models for ComfyUI/models/detection
• Save SeC models in ComfyUI/models/sams
My quick settings
• Steps: 6 to 8 based on your system
• Best window for detail enhancer: clips under 5 seconds
• For longer clips, use WAN 2.2 I2V low-noise upscaler
• Denoise strength: about 0.215 for light detail
• Sweet spot I use: 77 frames for smooth motion
• Low VRAM: use lower LoRA ranks and same sliders
Workflow: aistudynow.com/comfyui-wan-2-2-animate-v2-sec-mask-continue-motion-detail-enhancer-workflow
#WAN22Animate #ComfyUI #AIVideo #SeCmask
In this video I show how to join the ComfyUI Cloud free beta, how to run the Wan 2.2 Animate template, and a simple ComfyUI Cloud GPU test with real results. You can follow the same steps and run ComfyUI online on any device.
What you will learn
• What is ComfyUI Cloud and why it helps when you do not have a GPU
• How to join the free beta and sign in the right way
• How to load the Wan 2.2 Animate template and run a short render
• How the cloud GPU compares with a local setup for this test
• Where to find Templates, Files, and Workflows inside the interface
• How to upload your own JSON workflow
• Quick test with Qwen Image Edit 2509 for a simple clothing change
• Safe links and how to avoid fake sites that copy the ComfyUI look
Steps I follow
Go to comfy.org/cloud and join the wishlist.
Sign in and it opens the workspace at cloud.comfy.org.
Open Templates and pick Wan 2.2 Animate.
Upload one image and one short clip for a simple replace test.
Set the frames. I used 77 for this demo.
Click Run and watch the progress bar.
Check the result and save it.
Try the Qwen Image Edit 2509 template for a quick color change.
Upload your own JSON in File then Open Workflow. Standard nodes work best in beta.
Fake site warning
The safe path is comfy.org then cloud.comfy.org. I do not pay on look-alike sites. I double check the URL before I sign in.
#ComfyUICloud #Wan22Animate #CloudGPU
What you will learn
• I m loading the Lynx ComfyUI workflow and keeping identity stable
• I m using Wan 2.1 with VAE and the UMT XXL text encoder
• I m setting IP Scale and Ref Scale for face consistency and small details
• I m using simple motion settings for clean, natural video
Why this works
I m using the Lynx embed to hold the same face while the motion stays natural. I m keeping the inputs the same size with Resolution Master, so ComfyUI reads the image cleanly. I m testing safe settings first, then I m pushing a little more motion when I need it.
Quick settings I use
• IP Scale: 0.6 to 0.7
• Ref Scale: 0.6 for small changes, 1.0 to keep every detail
• Lynx CFG Scale: 1.4 to 1.8
• Duration: 5 seconds at 24 fps
• You have to keep inputs same size with Resolution Master
File You Need To Download
• aistudynow.com/comfyui-lynx-realistic-consistent-characters-no-lora
#ComfyUI #LynxWorkflow #WAN21 #AICharacters
What you will learn
• Install Olares on Ubuntu step by step and activate it with the LarePass app
• Open the Olares desktop and use the Market to install ComfyUI in one click
• Pick model folders, add custom nodes like Nunchaku, and generate images
• Access your server from a laptop with no VRAM and still run ComfyUI
• Olares vs NAS in simple words so you know why Olares is better for AI
Who is this for
If you are new, this is for you. I do everything on camera and you can copy my steps.
Quick requirements
• Ubuntu 22.04 or newer, 8 GB RAM or more, SSD storage
• Nvidia GPU is supported for acceleration. CPU also works but will be slower
• LarePass app on your phone to confirm login and activation
Commands I use
# update and install curl
sudo apt update && sudo apt install -y curl
# install Olares
curl -fsSL https://olares.sh | bash -
# if you face an error, uninstall and try again
olares-cli uninstall --all
How I set up Olares
• During install I press Enter to use the default domain.
• I enter my Olares ID from the LarePass app.
• I open the Wizard URL, scan the QR with LarePass, set my password, and log in.
• Tip: keep your phone and server on the same Wi-Fi during activation.
• I open the Olares desktop, go to Market, search ComfyUI, and click Install.
• I start ComfyUI, open it, pick models, add plugins, and generate.
File You Need To Download
• Base models for ComfyUI
• Text encoders (CLIP and T5)
• VAE file
• Optional custom nodes like Nunchaku
I show where each file goes inside the ComfyUI folders so you do not guess.
Olares vs NAS in one minute
• Olares is free, open source, and gives you an app store, sandboxing, reverse proxy, VPN, and single sign on. It is built for running apps like ComfyUI and Ollama.
• A NAS is mainly storage. For AI apps it is limited.
• With Olares you get a simple URL and secure remote access from anywhere.
How to install Ubuntu: youtube.com/watch?v=POf5mCs5YgI&t=7s
Website: olares.com
GitHub: GitHub - beclab/Olares: Olares: An Open-Source Personal Cloud to
Reclaim Your Data
github.com/beclab/Olares
X: https://x.com/Olares_OS
YouTube:youtube.com/@OlaresOS
#OpenSource #PersonalCloud #LocalAI #SelfHosting #Homelab #comfyUI
We start clean. I upload the workflow, open it in ComfyUI, and fix red nodes with Manager Install Missing Custom Nodes. When the graph opens, you will see a node called OVI Engine Loader. That means it is ready.
Next I explain the OVI node. It is the main part that makes video from text or from an image. There are two model builds, FP8 and BF16. If your GPU has low VRAM, set CPU Offload to True. That keeps it stable on 12 GB and 16 GB cards.
I show the files you need and the folders to use. You download the text encoder, the VAE, and the OVI model build you want. In my tests, the FP8 build is smaller and works well on mid GPUs. The BF16 build is larger and gives a bit more detail on 24 GB cards or higher.
Then we tune settings. You will see OVI Attention Selector. If you do not have Seg Attention, keep it on Auto. If you have Seg Attention, turn it on for faster renders.
For quality, I get the best balance with 50 steps. If your GPU is limited, use 30 to 36 steps and it still looks good. For resolution, I stay close to 720 x 720. It keeps the quality high and the performance smooth. You can also use 960 x 540 for landscape or 540 x 960 for vertical.
Now the prompt. This is the fun part. OVI understands a full scene from one line. You can add a voice line and background sound inside the same prompt. It uses two simple tags. The S tag is for speech. The AudioCap tag is for background sound. For one test I wrote a stage scene, then added a short line in the S tag and a guitar crowd mix in the AudioCap tag. The clip came out with lip sync and sound in time with the motion.
I also test text to video and image to video. Faces stay clear, lighting feels natural, and the lines are spoken in sync. I try scenes with emotion and two speakers. You will see a tense room, a quiet portrait, and a festive background. Each one renders with solid motion and clean audio.
If you want to try it, the model links are below. Watch till the end to learn the full OVI ComfyUI workflow, from setup to your first talking clip. In the next video I will show my low VRAM tests and share what settings worked best.
Workflow: aistudynow.com/ovi-comfyui-workflow-guide-2025-text-image-to-video-with-sound
Files You Need To Download:
#OVI #ComfyUI #TextToVideo #AIVideo
In this video, I’ll show you a step-by-step free workflow to make a 15-second HD video right inside ComfyUI, even if your system has low VRAM.
First, I’ll explain how to install the ComfyUI ZhenZhen Node, connect it to the Sora 2 API, and generate videos directly from prompts. You’ll see how I created a short story about a girl and a dragon — with real dialogue and smooth animation — straight from ComfyUI.
We’ll go through everything together:
Installing and setting up the custom Sora 2 node
Getting the API key from the official site
Connecting ComfyUI with Sora 2 cloud
Generating HD landscape or portrait videos from image and text prompts
Fixing errors like content restrictions for realistic faces
Tips for writing better story prompts and keeping your characters consistent
The best part? You can do all this for free using the trial credits. Each 15-second video costs around two cents, so you can make several test clips before paying anything.
At the end, I’ll also show how I generated a complete story with dialogue, frame-by-frame, using only prompts. The result looks cinematic, with correct lighting, camera movement, and synced voice lines.
If you want to make your own short films, animations, or story clips with OpenAI Sora 2, this tutorial is for you. You’ll learn how to build everything right inside ComfyUI without switching tools.
I’m also testing new updates from Sora 2 and ComfyUI next, so hit Like, Subscribe, and stay tuned for the next tutorial.
Files You Need To Download:
ComfyUI ZhenZhen Node
Python libraries (requirements.txt)
Base Sora API Key setup link (included in description)
#Sora2 #ComfyUI #AIVideo #OpenAISora
In this Video I use single-image, two-image, and three-image setups, plus LoRA support and one-click upscale. I’ve added a Resolution Master so all inputs auto-match. You’ll see pose fixes, background replace, clothes change, and identity-safe edits that don’t mess up the face.
What you’ll learn
ComfyUI graph for edits, dress-up, pose control, and background replace
Match all inputs to the same resolution for better result
Run Qwen Image Edit 2509 with GGUF Q5 on low VRAM
Use 4 step LoRA
Download the free workflow: aistudynow.com/qwen-image-edit-2509-in-comfyui-3-image-compose-q5-gguf
#QwenImageEdit #ComfyUI #GGUF
#ComfyUI #WAN22 #InfinityTalk
Swap any face or object inside one ComfyUI flow. Blend looks real. Lips match. Camera move support with Uni3C. FP8 vs GGUF Q4 test on low VRAM.
what you will learn
InfiniteTalk with WAN 2.2 Animate for better lip sync
Uni3C camera motion test and when to keep it off
FP8 vs Q4 GGUF on low VRAM and what to pick
LoRA we used
Relighting LoRA for Animate to match scene color and tone WanAnimate_relight_lora_fp16.safetensors
LightX 4-step LoRA set for Animate or I2V
low_noise_model.safetensors
Pusa v1 motion LoRA if you want stronger motion : Wan21_PusaV1_LoRA_14B_rank512_bf16.safetensors
HPS LoRA for human-preference quality tuning : Wan2.2-Fun-A14B-InP-LOW-HPS2.1_resized_dynamic_avg_rank_15_bf16.safetensors
upload the edit video and pick a supported WAN 2.2 size with Resolution Master
upload your subject image at the same size, remove background
mask with points: green keep, red remove, test mask once
models:
Wan2.2-Animate-14B FP8 model: Wan2_2-Animate-14B_fp8_e4m3fn_scaled_KJ.safetensors
Folder: ComfyUI/models/diffusion_models
Optional for low VRAM: Wan2.2 I2V GGUF Q4 or Q5 pairs here is the link
disclosure and credits
this video uses AI to alter real footage for an educational demo. altered or synthetic content label is on in Studio.
WAN, InfinityTalk, Uni3C, LoRA models belong to their creators. credits to them.
Download the free project: aistudynow.com/wan-2-2-vace-object-swap-with-an-image-in-comfyui-gguf-q5
#ComfyUI #WAN22 #GGUF
what you will learn
object swap with point masking that feels clean
FP8 vs Q5 GGUF side by side and what to pick on low VRAM
Lightx LoRA and HPS v2 LoRA setup
1 3 3 sampler chain for stable motion
color match toggle for better blend
upscale group for the final pass
quick start
upload your video, set a supported size. if it is vertical, use 480x832 or similar.
upload your image, match the same size, remove background.
mask with points. green for the subject you want. red for what you do not want. check mask once before you run full.
pick models. High Noise and Low Noise WAN 2.2 T2V. try FP8 first. test Q5 GGUF for low VRAM.
add LoRA. Lightx LoRA and HPS v2 LoRA. load text encoder and VAE.
sampling. first pass 1 step without LoRA. second pass 3 steps with LoRA. third pass 3 steps with LoRA.
turn on color match if tones look off. set strength to 0 if it shifts too much.
optional upscale at the end.
my run numbers
Q5 GGUF test at same mask and size
pass 1 about 31 sec around 23 to 24 GB VRAM
pass 2 about 38 sec around 12 to 13 GB
pass 3 about 51 sec
total clip about 1 min 32 sec on my box
low VRAM tip: bypass the first 1 step pass if memory is tight. keep it on if you can. it helps stability.
fix small mistakes fast
word on a T shirt not exact. tweak prompt 1 line and re run.
shoe mismatch. add one line and re run that block only.
if mask grabs the wrong person, add red points there and test mask alone once.
notes and credits
this video uses AI to alter real footage for an educational demo. AI disclosure is on in settings.
if there is paid promotion or affiliate links, the paid promotion box is on in Studio and a clear note is here.
WAN, VACE, Lightx, HPS and other assets belong to their creators. all credit to them.
questions are welcome. drop your mask screenshot and steps. we will sort it.
Workflow: aistudynow.com/wan-2-2-comfyui-infinite-video-on-low-vram-gguf-q5
Download the free workflow: aistudynow.com
#ComfyUI #WAN22 #WAN2_2 #AIvideo #GGUF
What you will learn
Non looping shots that extend to any length
Subgraph build that keeps your graph small
Exact model picks for low VRAM: High Noise model, Low Noise WAN 2.2 GGUF Q5, text encoder, VAE
Safe sizes with Resolution Master so no OOM
Fixed at 81 frames and 16 fps
Three samplers
Per part seed control for quick fixes
Quick start
For the FLUX + USO style workflow you mentioned
These four files go in these folders.
1. FLUX FP8 checkpoint
flux1-dev-fp8.safetensors
Folder: ComfyUI/models/checkpoints
Note: this checkpoint already includes CLIP and VAE. You do not need a separate text encoder or VAE. Pick flux1-dev LoRA v1 in the node.
2. USO LoRA
uso-flux1-dit-lora-v1.safetensors
Folder: ComfyUI/models/loras
3. Model patch
uso-flux1-projector-v1.safetensors
Folder: ComfyUI/models/model_patches
4. CLIP-Vision file
sigclip_vision_patch14_384.safetensors
Folder: ComfyUI/models/clip_vision
Optional
I add EasyGet v2 so quick tests finish fast.
In this video, you'll learn:
• how I set up the files and the LoRA so style transfer from image just works
• how I lock the subject face while swapping styles in ComfyUI
• what guidance settings and sizes gave me fast, clean results
Here’s what actually happened. I wired the USO ComfyUI Workflow, dropped in a style image, and the model picked up the look right away. Same prompt, new vibe. Then I added a subject image so the face stays the same when I move from manga lines to a wool texture or a Ghibli look. Let’s be real, I didn’t expect this part to be so quick. With FLUX and the USO LoRA, it worked better than I thought. If you’re on smaller VRAM, keep the sizes modest and it still feels snappy. I’ll show the exact nodes I used, the guidance band that behaved for me, and a couple of easy fixes when the style looks weak. Anyway, if you’re searching for a solid FLUX ComfyUI workflow, this should save you some testing time.
Resources mentioned:
• Free USO ComfyUI workflow: aistudynow.com/uso-comfyui-workflow-for-flux-style-from-image-same-face
#USOComfyUI #FLUX #StyleTransfer
In this video, you'll learn:
• how I set the graph for WAN 2.2 Fun Control on a low VRAM GPU
• when to use FP8 or GGUF Q4_K_M and what to change for speed
• simple fixes for OOM, timing drift, and attention errors
I keep this simple. used lightx2v lora I show my exact ComfyUI graph for WAN 2.2 Fun Control, the same one I use. First I update ComfyUI, then I load models. If the GPU has enough memory, I use FP8. If not, I switch to GGUF Q4_K_M. I set the text encoder on CPU so VRAM stays free. For sampling, I stay on DPM++ SDE. On very small cards, I try LCM and compare. I also set a compile cache folder so repeat runs get faster. You will see each step on screen. No extra talk. Just the parts that cut time and keep the look. WAN 2.2 Fun Control stays stable with these picks, and the clip time stays short.
Lora i used
wan2.2_t2v_lightx2v_4steps_lora_v1.1_high_noise.safetensors
wan2.2_t2v_lightx2v_4steps_lora_v1.1_low_noise.safetensors
Workflow: aistudynow.com/wan-2-2-fun-control-in-comfyui-on-low-vram
in this video, you’ll see:
• how i load the q6 gguf model and keep it stable in comfyui
• why i’m using wan 2.1 lora instead of the default wan 2.2 lora
• what the three groups actually do when they clean up faces and small details
first test was a pirate ship at sunset. at first the sails and sharks weren’t even there, but by the end it looked like someone snapped it on a phone. the rainy couple shot had bad faces in the start, but later the umbrella fixed itself and the street glow came alive. the horror house turned out like a movie still after a few passes. battlefield shots were trickier — too many faces, not all clean — but when i shifted the camera back it just worked.
the nice thing is this doesn’t need a monster gpu. wan 2.2 gguf runs fine, and if you’ve got a big card you can try bf16 safetensors too. i kept eta around 0.75, sometimes 0.5, and resolution master set the size.
so yeah, that’s the workflow. it surprised me how real some of these looked. i’ll keep testing, but even now, wan 2.2 text to image feels ready.
Workflow: aistudynow.com/wan-2-2-text-to-image-make-images-look-realistic-low-vram-comfyui-workflow
#Wan22 #ComfyUI #AIImageGeneration
In this video, you'll learn:
• how i set up the custom node and point each file
• short prompts that work (ocean, fire, thunder + simple music)
• the tiny fps fix when audio lands early or late
i keep this practical. i clone the repo, drop the weights, set four paths, and run a few shots. you’ll hear a beach clip get waves that rise and fade with the water, a burning tree with close crackle, a storm scene with low rumbles plus a light music bed, and a car-on-wet-road pass where the splash hits the right frame. when timing drifts, i show the one check that matters: match fps in two places. along the way i note what didn’t help, so you don’t lose time. if you’re already using hunyuan video comfyui or hunyuan image to video, this fits right in. i say it a few times because it matters: once the paths are correct, hunyuanvideo foley comfyui is simple to run.
github.com/aistudynow/Comfyui_HunyuanFoley
Workflow: aistudynow.com/hunyuanvideo-foley-comfyui-workflow-turn-quiet-video-into-sound
#HunyuanVideo #ComfyUI #AIVideo #TencentAI
In this video, you'll learn:
• How I set up the Wan 2.2 S2V-14B model in ComfyUI (clean folder paths, exact nodes)
• A simple image-to-video workflow that keeps lip sync tight, with steps/CFG and sampler settings
• What changes when I swap to GGUF for low-VRAM cards, and how speed vs quality compares
I keep it practical. One still photo and an audio track become a talking clip. First demo: singing by the ocean. Second demo: a sofa dialogue shot. You’ll see the mouth hit vowels and consonants on time, natural blinks, and small head motion that feels right. I also show the quick switch between Lightning (4 steps, CFG 1) and a slower pass without the LoRA, plus a low-VRAM run on Wan 2.2 GGUF. If you’ve used Wan 2.1 in ComfyUI before, this will feel familiar; the same text encoder and VAE work here too. I repeat the key settings on screen so you can copy them without pausing a dozen times. If you’re new to this, don’t worry—everything is straight to the point.
File Need:
•wan2.2_s2v_14B_bf16.safetensors
•wav2vec2_large_english_fp16.safetensors
• Free Workflow: aistudynow.com/wan-2-2-s2v-14b-speech-to-video-comfyui-workflow-gguf-ready
#Wan22 #ComfyUI #SpeechToVideo
In this video, you’ll learn:
• how I set up the InfiniteTalk ComfyUI Workflow with WAN 2.1 i2v and the right model files
• when to use the single vs. multi InfiniteTalk weights, plus FPS and frame counting that keeps lip-sync tight
• a fast preset (Lightning LoRA 4-step, CFG 1) that runs well on low VRAM, with sampler picks that stayed stable for me
I walk through three real runs on screen: image-to-video (one photo talking), video-to-video (swap new audio), and a two-speaker scene. Nothing fancy—just the files, nodes, FPS choices, and what I changed to keep sync clean. You’ll see where I place infinite_talk_single.safetensors or infinite_talk_multi.safetensors, how I pair WAN 2.1 encoders and VAE, and why I stuck with DPM++ SDE over LCM/FlowMatch on my card. If you’re searching for WAN 2.1 video or a ComfyUI workflow for image to video, this shows everything I actually used, end to end.
Resources mentioned:
• Free Workflow: aistudynow.com/infinitytalk-comfyui-workflow-wan-2-1-img2vid-vid2vid-multi-talk
#InfiniteTalk #comfyui #wan21
In this video, you’ll learn:
• how I set up the Qwen Image ControlNet GGUF Low VRAM ComfyUI Workflow with the exact folders, files, and nodes you actually need
• when to use depth, canny, or inpaint (and how “strength” changes the result) while keeping pose and camera locked
• a low-VRAM preset on Q4 GGUF you can copy, plus a simple way to switch between checkpoint and GGUF without rebuilding the graph
I keep it simple and hands-on. I update ComfyUI, drop in Qwen-Image DiffSynth ControlNets, pick the control in the Model Patcher Loader, and place the control models in ComfyUI/models/model_patches. For the base I show both paths: checkpoint (FP16/BF16) and GGUF UNet (bypass the checkpoint, keep the same CLIP and VAE). Then I run real edits: lock pose and camera with depth, follow hard edges with canny, and do small local fixes with inpaint (like changing hair color or swapping a shirt). I also add a resolution picker so the canvas can follow the image or a preset—no manual width/height every time. Here’s the thing: on my rig the Q4 GGUF path with a 4-step Lightning pass stays fast and stable, and it worked better than I thought for day-to-day edits.
Workflow:- aistudynow.com/qwen-image-controlnet-low-vram-comfyui-workflow-depth-canny-inpaint-gguf
#QwenImage #ComfyUI #ControlNet
In this video, you'll learn:
• how I set up the Qwen Image GGUF Low VRAM ComfyUI Workflow with the exact folders and files
• when to use Lightning 4-step or 8-step, and when to leave Lightning off for cleaner faces
• my low-VRAM preset on Q4, and the realism preset on Q8 you can copy
I keep it plain. Same seed. No resize unless I say it. I start with a clean FP16 baseline, then run the 8-step LoRA, then the 4-step LoRA, then a Q4 low-VRAM pass. I show where the Qwen text encoder and VAE sit in the graph, and how to switch between GGUF and a safetensors checkpoint. I also test a small realism LoRA on a selfie-style prompt. Lightning is fast; for skin and light I stick to realism at 50 steps on Q8. For daily work I use Q4 + Lightning 4-step for text and layout. I also include a straight Q4 vs BF16 comparison so you can see why Q4 looked close for me.
Workflow:- aistudynow.com/qwen-image-gguf-low-vram-comfyui-workflow-text-img2img-realism
#QwenImage #ComfyUI #GGUF
In this video, you'll learn:
• how I set up Qwen-Image-Edit in ComfyUI with the files and folders you actually need (GGUF or FP8)
• when I turn Lightning 4-step on—and when I leave it off—for text edits, recolors, and background swaps
• the simple order I follow for testing: Q4 + Lightning → FP8 + Lightning → FP8 no LoRA
I keep it simple. Same seed. No resize. I change a hoodie print and check if the font and placement stay the same. I switch a jacket to red denim and watch hair and face for drift. I drop in a coffee-shop background and match the light to the face. I try a light Ghibli pass. Lightning is fast, but tiny type and hair hold better on FP8 without LoRA at 20 / 2.5. I point to the text encoder and VAE spots in the graph. Small things matter—copy the models, restart ComfyUI, let output follow the image size. If you’re new to ComfyUI, you can follow along and get the same look.
Timestamps:
00:00 - Intro
00:42 - Files and folders (diffusion model, GGUF UNet, text encoder, VAE)
02:15 - Same-font text replacement
04:28 - Jacket to red denim
06:01 - Coffee-shop background
07:11 - Studio Ghibli pass
07:52 - Micro letter color test
08:39 - Kontext
09:11 - Presets recap (FP8 vs BF16, Lightning vs no LoRA)
Resources mentioned:
qwen_image_edit_fp8_e4m3fn.safetensors
Qwen_Image_Edit-Q4_1.gguf
Qwen-Image-Lightning-4steps-V1.0.safetensors
Workflow:- aistudynow.com/comfyui-qwen-image-edit-low-vram-workflow-gguf-vs-fp8
#QwenImageEdit #ComfyUI #GGUF
In this video, you'll learn:
• How to set up Wan2.2-Fun-A14B-Control in ComfyUI without missing files
• How to use Canny, Depth, and Pose control videos with reference images
• How to run video-to-video with stable motion and background matching
I tested the Wan 2.2 Fun ControlNet model inside ComfyUI, and it actually follows control inputs without drifting halfway through. You can feed it a Canny edge sequence, a depth video, or a pose track — even combine them — and the output stays locked to your reference. I’ll walk you through the exact ComfyUI workflow I used, from installing the VideoX-Fun node to downloading the model weights from Hugging Face.
We’ll also go over VRAM settings, FP16 vs BF16 precision, and how to keep everything running even on smaller GPUs. For video-to-video, I show two real examples — one indoor dancing scene and one outdoor winter walk — both recreated with consistent motion and matching details.
Resources mentioned:
• Workflow: aistudynow.com/how-to-use-wan-2-2-fun-controlnet-in-comfyui-workflow
#wan22funcontrolnet #comfyuiworkflow #aiVideo
In this video, you’ll learn:
• How to run the WAN 2.2 AIO model on just 6GB–8GB VRAM
• What version (Base, V2–V5) gives the best motion without distortion
• Why the FP8 AIO model is the fastest and most stable on lower-end GPUs
I wanted to see if WAN 2.2 was actually usable without a 24GB GPU — and turns out, it is. I tested everything on my 6GB VRAM setup using ComfyUI, and found a setup that runs five times faster than the normal WAN 2.2 workflow. No CLIP, no VAE, no two-stage samplers — just one checkpoint file, dropped in the models folder.
We walk through image-to-video tests with the AIO model, then try text-to-video using the T2V variant. There’s also a full real-world prompt test — cartoon boy with axes, snow, running motion, etc. I compare V3, V4, V5, and the base model, with full motion length tests at 81 and 121 frames. The T2V version even handled a ridiculous cat-vs-gorilla animation, on a mall background, and followed the prompt almost perfectly.
I also show how to download and install everything the right way — including where to place the model file, clip vision file, and best sampler settings for stable runs.
Resources mentioned:
• Workflow: aistudynow.com/wan-2-2-comfyui-workflow-runs-on-just-8gb-vram
#wan2.2 #comfyuiworkflow #aiimage2video
In this video, you'll learn:
• Why Qwen-Image nails text rendering better than any other model I’ve tried
• How to run Qwen in ComfyUI — no special tricks or hard setups
• What happens when you compare FP16, FP8, and GGUF versions side by side
So here’s the thing — I didn’t expect this model to work this well in ComfyUI. I ran the same prompt across multiple setups, including Flux Krea, and the difference was massive. Full sections like “Goal,” “Target Audience,” and even icon placements just worked. Even the tricky stuff like spacing and font clarity came out better than I thought — especially with the FP16 model.
I also tested the GGUF version locally, and even with the limitations, it pulled off 95% accuracy on complex banners. You’ll see me push each version — FP16, FP8, GGUF — and explain which one’s worth your time. If you’re into Qwen AI, or exploring new image generators inside ComfyUI, this one’s a must-watch.
Workflow: aistudynow.com/how-to-use-qwen-image-in-comfyui-and-why-it-beats-flux-krea
#qwenimage #comfyuiworkflow #aiimagegeneration
In this video, you’ll learn:
• How FLF2V in WAN2.2 actually works — and what surprised me
• A full ComfyUI workflow using WAN2.2 for frame-to-video
• Where this beats traditional motion generation tools (and where it doesn’t)
I tried WAN2.2 FLF2V because I was curious how it handles transitions between two still images. Like, could it actually guess what’s supposed to happen between a sunrise and a sunset? Turns out... yeah, and it worked better than I thought. I used ComfyUI for the whole setup — no extra scripts, just native nodes and the WAN2.2 model itself.
The new FLF2V feature in WAN2.2 basically lets you set a start frame and an end frame, and it builds the video in between. Not just motion — the lighting changes, camera feel, everything looks like it’s interpolated with purpose. I walked through the whole thing inside ComfyUI, and even swapped out different LoRAs to test how it reacts. Some combos worked better than expected, others kind of broke it — but I kept those in the video too.
So yeah, if you’re using WAN2.2 with ComfyUI and haven’t tested FLF2V yet, it’s worth a shot. Especially if you’ve been playing around with image-to-video workflows already.
Resources mentioned:
• WAN2.2 FLF2V Workflow: aistudynow.com/wan2-2-flf2v-comfyui-workflow
#WAN22 #ComfyUIWorkflow #ImageToVideo
In this video, you’ll learn:
• how FLUX.1 Krea compares to Dev1 with the exact same prompt
• which tricks actually improve quality (and which ones break it)
• how GGUF + TeaCache make this run crazy fast — even on low VRAM
So yeah… I didn’t plan to test a new model this week. But once I saw the FLUX.1 Krea post from Black Forest, I couldn’t ignore it. I gave it a shot using my usual prompt, no LoRA, nothing fancy — just raw output. And honestly? The results blew me away. Real reflections, accurate light, messy ground debris — it looked real.
The secret? This model wasn’t trained the usual way. The team focused more on style than scale — and it worked better than I expected. The human feedback tuning especially… that part made a huge difference.
Then I tested it in ComfyUI — starting from a clean workflow and then adding things one step at a time: samplers, TeaCache, GGUF, Flux1 Turbo Alpha. Each tweak either boosted speed or fixed detail loss. And yeah, some setups failed. But the ones that worked? Insanely fast and realistic. There’s even full support for low VRAM now — I got solid results using Q5 GGUF instead of FP16.
If you’re tired of over-processed, plasticky AI images, this might be the model you’ve been waiting for.
Resources mentioned:
• Workflow: aistudynow.com/how-to-use-flux-1-krea-in-comfyui-full-workflow-with-gguf-teacache-low-vram
#fluxai #kreaai #comfyuiworkflow
• How I cut generation time from 40 minutes down to just 1 minute using WAN 2.2 ComfyUI workflow
• Which version actually gives the best visual output — FP16 vs FP8 vs Ti2V 5B
• Why using LoRAs like PUCA V1 or LightX2V 14B can completely change your animation results
So yeah… I didn’t expect WAN 2.2 to need this many tweaks out of the box. My first run with the FP16 model? Brutal. Took 40 minutes to finish a single image-to-video render. But after changing some model settings, swapping VAE files, and reworking the two-stage sampling, I got it down to just over a minute. And honestly? The output was shockingly good.
In this one, I test the 14B FP16, 14B FP8, and the newer WAN 2.2 Ti2V 5B models side-by-side. Same prompt, same setup — just raw comparisons. One version looked too perfect. Another looked more human. You’ll see what I mean.
I also walk through what files you need, where to drop them, and how the new Mixture of Experts system works — with the automatic switch between high-noise and low-noise models mid-generation. Sounds complicated, but once it clicks, it’s pretty smooth in ComfyUI.
Later in the video, I tested lower step counts, LoRA toggles, and even ran the workflow using the tea_cache node with clear VRAM steps in between. Some versions took less than 30 seconds. Others pushed realism to near-photographic quality — even on a 10GB model.
And yes, I also ran pure text-to-video tests with prompts like “A soldier moves across a battlefield” and “A woman dancing” using the new WAN 2.2 T2V setup. Even the 4-step renders were surprisingly usable — and with minor LoRA tweaks, the realism jumped up fast.
If you’ve been wondering what WAN 2.2 can really do inside ComfyUI — especially with limited VRAM — this walkthrough has everything you need. I kept things real, tested on multiple GPUs, and included both high and low-end setups.
Resources mentioned:
• Free Workflow: aistudynow.com/wan-2-2-comfyui-workflow-low-vram-image-text-to-video
#wan22comfyui #comfyuiworkflow #texttovideoai
• How I used the Flux ComfyUI workflow with Neta Lumina (even though there’s barely any training data)
• Why Flux LoRA + ControlNet surprised me with way better structure and depth
• What changed when I switched from default models to the Flux image generator
So here’s the thing: Neta Lumina doesn’t have much data behind it — not like some of the more saturated models on Civitai. But I still wanted to see what would happen if I paired it with Flux inside ComfyUI. Honestly, I didn’t expect much. But the way the LoRA handled texture and tone… it worked better than I thought. Especially when I layered in Flux 1.1 and used a couple of VMC nodes for flow correction.
I also tested the difference between running it through basic SD and the Flux stable diffusion fork. The contrast was huge. If you’re into image generation workflows that lean heavily on fine control and don’t need a massive model dataset to look great — this one's worth checking.
Resources mentioned:
• Free Workflow: aistudynow.com/neta-lumina-with-flux-comfyui-workflow-complete-2025-guide
#NetaLumina #FluxComfyUI #AIImageGeneration
In this video, you'll learn:
• What changed in HiDream-E1.1 (and why it’s no longer stuck at 768x768)
• How it performs in pixel-heavy edits and GGUF setups
• Which model handles prompts more faithfully in real-world tests
I didn’t plan to make this video. But when I saw HiDream-E1.1 sitting there with barely any downloads on Hugging Face, I had to try it. No one was talking about it, and the “1M pixel” description had me curious. So I fired up ComfyUI, built a fresh workflow, and ran both models side by side — same image, same prompt, same test.
The first test — a simple dress color change — nearly broke my patience. It ran for over 40 minutes and gave me a blurry mess. But once I resized the input and tweaked the CFG settings, things started looking better. Then I ran the same prompt through Kontext Flux… and yeah, you’ll see the difference.
I even gave both models a complex test — Neo in bullet time — and the results genuinely surprised me. One AI nailed the cleanup. The other? Not quite.
You’ll see it all: speed tests, quality breakdowns, and the real pros and cons. And if you want to try it yourself, I’ve linked both workflows below.
Resources mentioned:
• Free workflow download: aistudynow.com/hidream%e2%80%91e1-1-vs-kontext-flux-comfyui-workflow
#HiDreamE1 #ComfyUI #fluxai
In this video, you'll learn:
• How to set up the LTXV 0.9.8 ComfyUI workflow without breaking your GPU
• The easiest way to upscale your AI videos for better detail
• Why using the LoRA Detailer makes a real difference in quality
So yeah, I finally got the LTXV 0.9.8 model working in ComfyUI, and honestly, it's been a game-changer for generating longer AI videos. I’ve been testing it with image-to-video workflows, and the prompt understanding feels more natural than earlier versions. You can generate up to 1 minute of video at 24fps, which is pretty solid for this stage of AI video tools.
The thing that surprised me the most? The LoRA Detailer actually improves small details like textures and lighting in a way that’s noticeable. I tried both the LoRA method and the title method for adding detail, and the LoRA version definitely worked better than I thought it would. I also tested the new spatial upscaling model, and it helped make the final output look sharper without blowing up my VRAM usage.
Resources mentioned:
• T-shirt: https://wilddragon.in/product/this-is-my-ai-vibe-oversize-t-shirt-for-men/
Coupon code: aistudynow
• Free Workflow: aistudynow.com/how-to-generate-1-minute-ai-videos-using-ltxv-0-9-8-comfyui-with-lora-detailer
#LTXVComfyUI #AIvideo #ComfyUIworkflow #LoRADetailer
Generate infinite Time AI videos using the Wan 2.1 ComfyUI workflow?
So I made this workflow that basically lets you generate AI videos nonstop — like, text-to-video or image-to-video, either way. The main trick here is using the For Loop node in ComfyUI. It just repeats the whole generation process however many times you want.
You can set the number of loops manually if you want, or let the math node figure it out based on the video length you’re going for. Either way, it just runs the model a few times and puts it all together at the end.
The loop setup uses the Wan 2.1 model , and if you're going the image-to-video route, there's a toggle for that too. Once the loop runs, the For Loop End node stitches everything together into one smooth output. But here’s the thing — when you use overlapping frames (which helps avoid sudden cuts), some frames get removed. So even if you aim for 15 seconds, you might end up with closer to 12 seconds of usable footage.
I tested this with a prompt like "man riding a bike with explosions," and it worked better than I expected. The motion looked natural, and the transitions were smooth thanks to the overlap. Then I changed the prompt in one of the loops to add fire effects around the bike — and it actually picked that up. That said, after the first change, the same visual theme repeated, so it’s best to keep tweaking prompts if you want variety.
If you’re working with image-to-video instead, just disable the text-to-video section and select your input image. Same loop logic applies.
Resources mentioned:
• T-shirt: https://wilddragon.in/product/this-is-my-ai-vibe-oversize-t-shirt-for-men/
Coupon code: aistudynow
• [ComfyUI Wan 2.1 Model]: huggingface.co/vrgamedevgirl84/Wan14BT2VFusioniX/tree/main
• [Wan 2.1 VACE Model]: huggingface.co/QuantStack/Wan2.1_T2V_14B_FusionX_VACE/tree/main
• Free Workflow: aistudynow.com/how-to-create-unlimited-length-videos-with-wan-2-1-comfyui-workflow-2025
#Wan21 #ComfyUI #AIVideoGeneration #ImageToVideo
In this video, you'll learn:
• How to set up FLUX.1 Kontext in ComfyUI without breaking anything
• Tips for using image prompts effectively with different styles
• Why changing one setting made a huge difference in output quality
So yeah, I finally got around to trying FLUX.1 Kontext in ComfyUI — been seeing a lot of people talk about it online, especially how well it handles image prompts and complex edits. I wanted to test it myself and see if it actually holds up compared to other models I’ve used.
First thing I did was download the model from Hugging Face — there are GGUF and FP8 versions if you’re working with lower VRAM. Once that was done, I imported it into ComfyUI and set up the basic workflow. Honestly, it wasn’t too bad. If you’ve used ComfyUI before, most of the nodes will feel familiar.
One of the cooler things I tried was taking a GTA-style image with text and keeping that comic-book look while swapping out the content — think "dragon-themed GTA" or something like that. Worked better than I thought it would. I also tested it with Einstein, turned him into anime style just by changing the prompt. Still kept his facial features recognizable, which is always a win in my book.
There are a few settings worth tweaking, like Base Shift and Sigma Sampler. I left Sigma Sampler bypassed but played with Base Shift at 0.50 and got some solid results. You can also adjust resolution manually if you want — default works fine, but sometimes it’s good to have control.
Anyway, if you're curious about FLUX.1 Kontext and how it runs inside ComfyUI, definitely check out the full walkthrough. It’s pretty powerful once you get the hang of it, and the flexibility with image prompts makes it super fun to experiment with.
Resources mentioned:
Comfyui Workflow: aistudynow.com/flux-1-kontext-comfyui-workflow-low-vram-setup-with-cache-lora
#fluxkontext #comfyui #flux1kontext #aiimagegeneration
In this video, you'll learn:
• How to install Wan 2.1 FusionX GGUF in ComfyUI without needing high-end hardware run in low VRAM
• A simple way to generate both text-to-video and image-to-video using this workflow
• Tips for optimizing LoRA models like MPS, Realism Boost, and Detail Enhancer
So yeah, I tried setting up Wan 2.1 FusionX GGUF a few weeks ago, and honestly, I didn’t expect it to work this well on my 4GB GPU. The main goal was to make this accessible for people who aren’t running top-tier GPUs — and turns out, with the right setup, it runs pretty smoothly.
I followed the steps from aistudynow.com to download the base workflow, then added in the GGUF quantized models from Hugging Face. Once everything was linked up properly — VAE, CLIP, text encoder — I started testing different LoRAs like CausVid, AccVid, and MPS. What surprised me most was how much better the Fusion X model worked without any LoRAs enabled. It just handled prompts cleaner and faster.
Anyway, if you're into Wan 2.1 comfyui tutorial or Wan 2.1 comfyui workflow stuff, this should help you get started fast. Whether you're doing Wan 2.1 comfyui image to video or text-to-video, this setup gives solid results even on limited VRAM.
Resources mentioned:
• Wan 2.1 FusionX GGUF workflow: aistudynow.com/how-to-run-wan-2-1-fusionx-gguf-advanced-comfyui-workflow-on-low-vram
In this video, you'll learn:
• How to create AI-generated videos from a single image
• Why this workflow works great with multiple characters
• A quick trick to manually add background support even though it’s not built-in
The setup is pretty straightforward once you know where everything goes. I used the WanX 21 - LightXV LoRA because it generates videos faster and only takes 5 steps.
For backgrounds, there’s no direct third input, but I found a way using the Image Concatenate (Multi) node. It’s not perfect, but it opens up creative options if you’re willing to play around.
Resources mentioned:
aistudynow.com/how-to-use-wan-2-1-magref-in-comfyui-5-step-ai-video-workflow
#wan21 #magref #comfyuiworkflow #aivideogeneration
• How to install HunYuan 3D 2.1 in ComfyUI manually or via the manager
• Why image-to-3D generation works better than text-to-3D for now
• How to use multiview inputs for more accurate 3D results
So yeah, I finally got around to testing the HunYuan 3D 2.1 ComfyUI workflow. Let me be real — most open-source 3D models still rely on basic RGB textures, which limits realism. But with HunYuan 3D 2.1, things are different. It uses a geometry-texture decoupled architecture that actually gives you more control and better output.
I started with a simple balloon image generated via Flux, then plugged it into the HunYuan 3D Image-to-3D Sampler node. First attempt? Took 35 minutes and didn’t work great. Definitely not ideal. But once I used the correct settings and model version, it rendered in just 26 seconds — and the details were solid. Rope texture, lighting, everything looked sharp.
You can also use multiple views (front, back, left, right) to get a more accurate 3D model. Just upload each image to its corresponding input slot, and the AI builds from there. It’s like giving it a full photo session of your object instead of guessing from one angle.
Exporting is straightforward too. GLB format worked fine, and I was able to open it in Blender without any issues. No extra plugins needed — just drag and drop.
Resources mentioned:
aistudynow.com/how-to-install-hunyuan-3d-2-1-in-comfyui-free-image-to-3d-workflow
github.com/niknah/ComfyUI-Hunyuan-3D-2
In this video, you'll learn:
• How to use Wan 2.1 FusionX VACE with ComfyUI for image-to-video animation
• Why combining motion capture and reference images gives better results
• What to do when things go wrong — common errors and fixes included
So yeah… I tried the Wan 2.1 FusionX VACE ComfyUI workflow with a few different test videos and reference images, just to see how it holds up. The results were pretty shocking — especially compared to other tools I've used before. It worked better than I thought, especially when using both ControlNet nodes together.
The main thing I wanted was to animate a static image using motion from a source video. That’s where this model really shines. You can upload a reference image, add motion from another clip, and combine both to generate a smooth, frame-consistent output. No weird glitches or blurriness — even during fast hand movements.
I also tested background swapping without changing the character — which worked well as long as I gave the AI enough context in the prompt. Just make sure not to over-explain the subject since the reference image already tells the model what to keep consistent.
If you're running into issues like sage attention errors or VRAM limits, there are a few quick fixes I covered that helped me get the workflow running smoothly again.
Resources mentioned:
• Wan 2.1 FusionX VACE Workflow: aistudynow.com/how-to-use-wan-2-1-fusionx-vace-in-comfyui-workflow-included
•huggingface.co/QuantStack/Wan2.1_T2V_14B_FusionX_VACE/tree/main
#Wan21FusionX #VACEComfyUI #ImageToVideoAI
In this video, you'll learn:
• How to generate Hollywood-quality videos in just 6 steps using WAN 2.1 Fusion X
• Why frame consistency is now production-ready for cinematic use
• The exact workflow setup for ComfyUI, including FP8 vs FP16 and GGUF quantized models
I’ll be real — when I first tested this model, I didn’t expect it to work this well. You're going to want to see how smooth the motion looks compared to older versions, especially with text-to-video and image-to-video workflows. It worked better than I thought, especially at lower VRAM setups.
Here’s what actually happened when I tried generating a scene of a man walking through rain toward a castle — the model handled the movement, lighting, and detail retention like a pro. No more jittery transitions or blurry artifacts. What surprised me was how fast it rendered on just 10GB VRAM.
If you’re working with limited hardware, here’s what I found works best:
Use the FP8 version if you have lower VRAM
Stick to 81–97 frames for reliable motion (pushing beyond can break the flow)
Resources mentioned:
• Workflow aistudynow.com/wan-2-1-fusionx-comfyui-workflow-image-to-video-text-to-video-in-6-steps
#WAN21FusionX #AIvideo #ComfyUI #TextToVideo


