Gyroscope - Boards Of Canada [Cover] rdrgyeah 2021-03-15 | Gyroscope - Boards Of CanadaTascam 424 + Volca SampleIg: rglrdemo#boardsofcanada
Jacquard Causeway - Boards Of Canada [Cover] rdrgyeah 2023-05-19 | Hello, here is an attempt at covering the beautiful Jacquard Causeway by BOC.Setup Info:Mixer - Tape - Tascam 424:Track1-2 tape: main melody and delay (combination of string-horn samples slowed down on tape and resampled, played on kontakt + synth1)track 3: final Pad (synth1 on tape)Track4: click source + input VSTrack 5: input delay returnTascam Out straight to Sony TC510-2 reel to reel Tape recorderNo further processing apart from master limiting in ReaperVOLCA SAMPLE12 samples in 3 memory slots drum loop + bass - placed in order with bar filter (pajen firmware)The drums have been recorded live and sampled, mixed with 808 simple kick and snare (very low) bass is a bass sample stretched in kontakt.as usual VS is synced to a click track on the 4 track on tapelove#boardsofcanada #cover
S P 7 rdrgyeah 2023-05-02 | #shorts #glitchDS #nintendodsLet’s try this shorts thingyNintendoDS w/ GlitchDS
Come On My Selector - Squarepusher [Cover] rdrgyeah 2022-09-12 | Hello,This is an attempt at covering Come On My Selector, by the almighty Squarepusher.Tascam 424:channel 1: vocal samples (on tape)channel 2: Monologue channel 3: Basschannel 4: analog delay return + sync track click (on tape)channel 5/6: Volca Sample fx send: to ibanez analog delay (very short delay time, hard panned on return (channel 4) to the right, with bass and monologue covering the left)Volca Sample (pajen firmware): samples 1,2,3,4: think break (sped up 190 bpm)sample 5: amen break (chopped and sped up at 190 bpm)samples 6,8,9,10: kick, ride, open hh, closed hhKP Quad: stereo FXBass: Squier Matt Freeman signature w SPB3 Seymour Duncan + Guyatone Bass Driver + Hartke Bass Attack MIDI routing: Tape (track4) with click track -- Tascam Sync Out -- Monologue sync in -- monologue MIDI out (clock synced to tape) -- Modstep (iPad) used as sequencer -- MIDI out via camera kit -- MIDI splitter -- Monologue (ch13) and Volca Sample (ch 11)#squarepusher #cover
Rae - Autechre [Cover] rdrgyeah 2022-05-03 | Hello everyone,As usual some setup info:TASCAM 424:Tape:Track 1: keys (synth1)Track 2: Bass (synth1)Track 3: delay on keys + pitch shifter + livecutTrack 4: click trackMixer:Channel/Input 1: tape track;Channel/Input 2: VS input + Tape track played via cue knob 2 on Tascam;Channel/Input 3: Monologue input + Tape track played via cue knob 3Channel/Input 4: Return Mono Delay Input + click track sent via sync out to Monologue Sync In;Channel/Input 5/6: Return FX in (stereo) from ZOOM GFX5 (out of frame), Stereo delay + Pitch ShifterVOLCA SAMPLE:4: tom15:tom26:tom37:hh closed8:hh open9:Kick10: SnareI have set kick and snare on 9-10 because they automatically kill each other when playedMIDI ROUTE:Tape click track - sync out - Monologue - clock out to ipad via Midi out - modstep sequencer - Monologue + VS ( I am using a camera kit + usb midi splitter)RECORDING:Headphone out from Tascam424 goes into KP quad wich goes straight into a Scarlett 2i4, recorded on Reaper, rendered with a limiter and slight eq and comp (NOVA multiband compressor).
A V 6 rdrgyeah 2021-08-06 | Volca Sample + Kaosspad + Tascam 424 + Korg MonologueVolca synced to 424 click trackProps to Chris Lody for his wonderful tutorial about VS sequencing trick I have used here:youtu.be/ci_ReYDKUfI
M K 5 rdrgyeah 2021-06-10 | Glitch DS - tascam 424 - Korg Monologue - Korg Kaosspad QuadFx: Ibanez Analog Delay - Zoom Gfx5 (offscreen)
Come To Dust - Boards Of Canada [Cover] rdrgyeah 2021-04-14 | Come To Dust - Boards Of Canada [Cover]Hello everyone, some explanation about the setup:TASCAM 424:Tape:Track 1: Intro (Synth1 recorded on tape) + Bass throughout the track(Monologue recorded on tape)Track 2: Arp (Synth1 recorded on tape)Track 3: Pad (Synth1)Track 4: click trackMixer:Channel/Input 1: tape track;Channel/Input 2: Monologue input + Tape track played via cue knob 2 on Tascam;Channel/Input 3: tape track;Channel/Input 4: Return Mono Delay Input + click track sent via sync out to Volca Sample Sync In;Channel/Input 5/6: Return FX in (stereo) from ZOOM GFX5 (out of frame), Hall reverb + Pitch ShifterChannel/Input 7/8: Volca Sample Stereo OutFX out: To mini Behringer Headphone Mixer (top left of screen), it sends audio to ZOOM GFX 5 and Ibanez Analog Delay.VOLCA SAMPLE:3 Memory slots used, Pajen firmware with probability and Bar Filter used on samples 1,2,8,9. Volca is synced to a click track coming from the 4th channel on tape.1: First half Synth sample2: Kick3: Snare4: Reversed Snare5:Ride6:hh7:2nd Kick8:hh29:Second half Synth sampleMONOLOGUE:For the filter sweeps I am playing it on the first sequencer step with slide on.Headphone out from Tascam424 goes straight into a Scarlett 2i4, recorded on Reaper, rendered with a limiter and slight eq and comp (NOVA multiband compressor).Come To Dust - Boards Of CanadaFrom Tomorrow’s Harvest (2013)Original Track Produced by Michael Sandison & Marcus Eoin#boardsofcanada ig: @rglrdemo
Everything About You Is Special - Venetian Snares [Tascam 424 - Monologue - Volca Sample Cover] rdrgyeah 2021-02-22 | Tascam 424 synced to Ableton Live Lite (used as MIDI sequencer)
Reach For The Dead - Boards of Canada [Cover] rdrgyeah 2021-01-29 | Syncing Volca to tape!IG: @rglrdemo mp3 320kbs: mediafire.com/file/th59dc34psim7hw/BoCReachForTheDead-CVR.mp3/file
4 A P rdrgyeah 2020-04-26 | Gear used:Tascam 424 w tape loopKorg MonologueZoom GFX5 for send return fx processingIbanez Analog DelayStereo out from 424 straight to Scarlett 2i4 2nd gen into Reaper
LIVE JAM - Tascam 424 tape loop - KORG Monologue - Nintendo DS - Hexagliphics rdrgyeah 2020-02-14 | Gear used:Tascam 424 w tape loopKorg MonologueNintendo DS w Glitch DSIpad w HexagliphicsStereo out from 424 straight to Scarlett 2i4 2nd gen into ReaperJ&%)f8[&Y&PRaz$
![Gyroscope - Boards Of Canada [Cover]](https://i.ytimg.com/vi/-yAeZx1K_OY/maxresdefault.jpg)