Prusa CORE One Conversion Kit Build | Day 4 - Nextruder & Enclosure GunplaMark 2025-08-21 | I'm finally upgrading my Prusa MK4S printer to the new CORE One. In this series we'll go through the entire process of building the official CORE One conversion kit.The build documentation for the conversion kit is available in an online version here: help.prusa3d.com/manual/core-one-conversion-kit_2276The downloadable PDF version of the documentation seems to have disappeared. If it ever comes back, I'll link it here as well.
Resin Conversion 101 - Episode 3 : Test Fit GunplaMark 2025-09-23 | In this short video series I'll cover my process for building Gunpla resin conversion kits. I'm working on a resin conversion for the MG Force Impulse Gundam, so that will be our example kit for this series. Whether you're a seasoned veteran or a brand new builder just getting into resin kits, I hope you'll find some helpful tips and techniques as we go through the build process.In this episode, we'll test fit the resin parts onto the plastic inner frame and get our first sneak peek at how the finished piece will look.
Recharging Desiccant with the Polymaker PolyDryer GunplaMark 2025-09-19 | Taking a quick look at my preferred method for recharging the desiccant that I use in my filament dry boxes, using the Polymaker PolyDryer (amzn.to/47RVopg) and some printed parts (makerworld.com/en/models/886565-desiccant-dryer-and-cover-for-polymaker-polydryer).
Resin Conversion 101 - Episode 2 : Parts Cleanup GunplaMark 2025-09-10 | In this short video series I'll cover my process for building Gunpla resin conversion kits. I'm working on a resin conversion for the MG Force Impulse Gundam, so that will be our example kit for this series. Whether you're a seasoned veteran or a brand new builder just getting into resin kits, I hope you'll find some helpful tips and techniques as we go through the build process.In this episode, we'll prep all the resin parts for assembly, doing a lot of trimming and sanding along the way.
Resin Conversion 101 - Episode 1 : Parts Inventory GunplaMark 2025-08-28 | In this short video series I'll cover my process for building Gunpla resin conversion kits. I'm working on a resin conversion for the MG Force Impulse Gundam, so that will be our example kit for this series. Whether you're a seasoned veteran or a brand new builder just getting into resin kits, I hope you'll find some helpful tips and techniques as we go through the build process.In this episode, I'll give you a quick intro into the world of resin kits and then we'll unpack the kit I''ll be working on, take a look through the instruction manual, do an inventory of all the parts, and get the parts sorted and organized so that we're ready to start the build.
Prusa CORE One Conversion Kit Build | Day 5 - LCD, Door, Calibration & First Print! GunplaMark 2025-08-22 | I'm finally upgrading my Prusa MK4S printer to the new CORE One. In this series we'll go through the entire process of building the official CORE One conversion kit.The build documentation for the conversion kit is available in an online version here: help.prusa3d.com/manual/core-one-conversion-kit_2276The downloadable PDF version of the documentation seems to have disappeared. If it ever comes back, I'll link it here as well.
Prusa CORE One Conversion Kit Build | Day 3 - Heated Bed & Core XY Assembly GunplaMark 2025-08-20 | I'm finally upgrading my Prusa MK4S printer to the new CORE One. In this series we'll go through the entire process of building the official CORE One conversion kit.The build documentation for the conversion kit is available in an online version here: help.prusa3d.com/manual/core-one-conversion-kit_2276The downloadable PDF version of the documentation seems to have disappeared. If it ever comes back, I'll link it here as well.
Prusa CORE One Conversion Kit Build | Day 2 - Back Panel, Power Supply & Electronics Enclosure GunplaMark 2025-08-19 | I'm finally upgrading my Prusa MK4S printer to the new CORE One. In this series we'll go through the entire process of building the official CORE One conversion kit.The build documentation for the conversion kit is available in an online version here: help.prusa3d.com/manual/core-one-conversion-kit_2276The downloadable PDF version of the documentation seems to have disappeared. If it ever comes back, I'll link it here as well.
Prusa CORE One Conversion Kit Build | Day 1 - Disassembly, Parts Prep & Base GunplaMark 2025-08-18 | I'm finally upgrading my Prusa MK4S printer to the new CORE One. In this series we'll go through the entire process of building the official CORE One conversion kit.The build documentation for the conversion kit is available in an online version here: help.prusa3d.com/manual/core-one-conversion-kit_2276The downloadable PDF version of the documentation seems to have disappeared. If it ever comes back, I'll link it here as well.
Custom Force Impulse Gundam build for ReachConf GunplaMark 2025-07-28 | I've been commissioned to build this Force Impulse Gundam resin kit by a friend. If all goes well, it'll be on display at ReachConf in Orlando, FL later this year. I'll be live streaming a lot of the prep, painting, and final assembly work on this project for everyone who's interested in how the whole process works when building a resin conversion kit.If you're interested in learning more about ReachConf, all the details are at reachconf.org.Background Music:Killing Time by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Voron 0.2 Upgrade - BIQU Nebula Extruder GunplaMark 2025-07-19 | Installing and testing the new BIQU Nebula extruder on my Voron 0.2.Below are links to the resources and printed parts I used for this build:Nebula Github Repository - github.com/bigtreetech/Nebula/tree/masterNebula Wiki - bttwiki.com/Nebula.htmlDragon Burner Extruder Mount - github.com/chirpy2605/voron/blob/main/V0/Dragon_Burner/STLs/v0.2/Sherpa_Mini_pattern_mounts/Extruder_Mounts/LGX_Lite_Mount.stlDragon Burner Revo Hotend Mount - github.com/chirpy2605/voron/blob/main/V0/Dragon_Burner/STLs/v0.2/Sherpa_Mini_pattern_mounts/Hotend_Mounts/RevoVoron_Mount.stlPicobilical Toolhead PCB Mount - printables.com/model/1359526-biqu-nebula-to-picobilical-toolhead-board-adapterPicobilical Pinout - github.com/MotorDynamicsLab/LDO-Picobilical/blob/master/Hardware/Frame1.3/Picobilical_A1.3_Pinout.pdfUpper-Rear Bowden Inlet (URBI) for Voron V0 - printables.com/model/408745-v0-upper-rear-bowden-inlet-urbi-for-voron-v0My v0.2 Klipper Config - github.com/markkendall/voron-v0-configMy Discord - discord.gg/G73Z3pDa8X00:00 - Intro and Unboxing07:25 - Online Resources and Printed Parts14:04 - Assembly23:17 - Wiring27:48 - Filament Load/Unload Testing35:13 - Test Prints and Final Thoughts
Live Snap Build: The Legion of Thor GunplaMark 2025-07-02 | I'm back with some live build streams, working on snap building a few different kits that have piled up in my backlog. We'll keep these streams going every Tuesday and Thursday morning (and sometimes Sunday evenings) until I've built enough kits that my backlog is small enough to fit on the shelf again. Join in for some chill music, conversation, and building Gunpla kits.
Ultimate Filament Drybox System - Tweaks, Remixes & My Preferred Setup GunplaMark 2025-05-23 | After living with my new filament drybox system for a few months, receiving a lot of good suggestions and feedback from all of you, and looking at remixes that others have created, it's time for an official remix of my own. I've made some major changes to the roller system that allows larger plastic spools to fit much better and made a lot of smaller tweaks as well.In this video I'll take a look at all the parts included with this remix and show how I convert one of my older drybox containers (the 2024 version) to this new setup. Along the way, I'll attempt to answer some of the common questions I've seen from you guys.The new, remixed parts are all here: printables.com/model/1305684-the-ultimate-cereal-container-filament-drybox-offiThis system is a work in progress. I plan to make updates and add more features based on your feedback. If you have suggestions, questions, or run into any issues, let me know here in a comment. Or, if you want to have a longer conversation, head over to the filament-storage-system channel on my Discord server: discord.gg/G73Z3pDa8XHappy printing!
Multi Material Upgrade for My Voron 2.4... Lets Build the Annex Engineering TradRack GunplaMark 2025-05-20 | This is my complete build and testing process for the TradRack MMU that I'm adding to my Voron 2.4 printer. If you're following along or building one of these for yourself, linked below are the resources I used.TradRack: github.com/Annex-Engineering/TradRackHappy Hare: github.com/moggieuk/Happy-HareHappy Hare for KlipperScreen: github.com/moggieuk/KlipperScreen-Happy-Hare-Edition
Ultimate Filament Drybox System - Extended System Printing and Assembly Guide GunplaMark 2025-05-02 | This is the third in a series of printing and assembly guides for my filament drybox system. In this episode we'll print and assemble the extended system. This adds some large corner pieces at the top of our drybox, allowing for wall mounting and stacking of the boxes. It also adds corner brackets inside the box that help with managing excess filament as it's pushed back into the drybox, either manually or by an MMU system.All of the STLs we'll be printing are here: printables.com/model/1249376-the-ultimate-cereal-container-filament-dryboxThis system is a work in progress. I plan to make updates and add more features based on your feedback. If you have suggestions, questions, or run into any issues, let me know here in a comment. Or, if you want to have a longer conversation, head over to the filament-storage-system channel on my Discord server: discord.gg/G73Z3pDa8XHappy printing!
Ultimate Filament Drybox System - Core Options Printing and Assembly Guide GunplaMark 2025-04-08 | This is the second in a series of printing and assembly guides for my filament drybox system. In this episode we'll add some optional features to the core system drybox that we built last time. These include various ways to add desiccant for controlling humidity inside the container, a hygrometer for measuring the humidity in the container, and optional filament tags.All of the STLs we'll be printing are here: printables.com/model/1249376-the-ultimate-cereal-container-filament-dryboxAnd these are the additional bits of hardware that we'll be using: Hygrometers: amzn.to/46iyXXw Desiccant: amzn.to/3YgGhkAI mentioned in the video that there's a remix on Printables for the popular round hygrometer form factor. Thanks to Yurtle Ahern for that remix. It can be found here: printables.com/model/1250261-round-hydrometer-holder-for-ultimate-cereal-contaiThis system is a work in progress. I plan to make updates and add more features based on your feedback. If you have suggestions, questions, or run into any issues, let me know here in a comment. Or, if you want to have a longer conversation, head over to the filament-storage-system channel on my Discord server: discord.gg/G73Z3pDa8XHappy printing!
Ultimate Filament Drybox System - Core System Printing and Assembly Guide GunplaMark 2025-04-04 | This is the first in a series of printing and assembly guides for my filament drybox system. In this episode we'll work on the core system, which provides the base for all of the optional features that we'll be looking at in future assembly videos. Once you've completed this part of the build, you'll have a basic drybox container that holds a spool of filament and can connect to your printer.All of the STLs we'll be printing are here: printables.com/model/1249376-the-ultimate-cereal-container-filament-dryboxAnd these are the additional bits of hardware that we'll be using: Storage containers: amzn.to/4f6PgdU Bearings: amzn.to/4l9Lrrp Bowden couplers: amzn.to/3A3yBI3I mentioned in the video that I'd include a measurement for the bowden coupler hole in case you don't want to print and use the hole jig. That measurement is 50mm from the lip at the bottom edge of the container up to the center of the hole.This system is a work in progress. I plan to make updates and add more features based on your feedback. If you have suggestions, questions, or run into any issues, let me know here in a comment. Or, if you want to have a longer conversation, head over to the filament-storage-system channel on my Discord server: discord.gg/G73Z3pDa8XHappy printing!
Ultimate Filament Drybox System - 2025 Redesign with Better Performance and Exciting New Features GunplaMark 2025-03-31 | It's been 8 months since the release of my filament drybox system, and it's time for a redesign! Thanks to all of you who sent in suggestions and feedback on the original version of the system. I've incorporated many of your suggestions along with my own experience using the dryboxes with my printers, and this updated version of the system fixes several big issues while also adding some new features.All of the files, along with basic assembly instructions, can be found here: printables.com/model/1249376-the-ultimate-cereal-container-filament-dryboxThis video is the first in a playlist that will include more in-depth looks at how to print all the parts, assemble the boxes, and use the various optional features.This system is a work in progress. I plan to make updates and add more features based on your feedback. If you have suggestions, questions, or run into any issues, let me know here in a comment. Or, if you want to have a longer conversation, head over to the filament-storage-system channel on my Discord server: discord.gg/G73Z3pDa8XHappy printing!
Live Build: Mecha Core Industry Oberon [Part III] GunplaMark 2025-02-22 | After a long hiatus, I'm back with a live mecha model kit build! This one is more than just a simple snap build... I didn't do any custom painting, but I prepared all the parts with panel lining, decals, and top coat, so everything is ready for final assembly. Let's put it together and see if it's as good as the box art makes it look.
My Thoughts on the Prusa MK4S After Two Months of Printing GunplaMark 2025-02-10 | I built this Prusa MK4S from a kit in early December 2024, so now after a couple months of using it in my studio I wanted to share my experience with the printer and compare it with my custom built Voron printers.
Live Build: Mecha Core Industry Oberon [Part II] GunplaMark 2025-02-07 | After a long hiatus, I'm back with a live mecha model kit build! This one is more than just a simple snap build... I didn't do any custom painting, but I prepared all the parts with panel lining, decals, and top coat, so everything is ready for final assembly. Let's put it together and see if it's as good as the box art makes it look.
Live Build: Mecha Core Industry Oberon [Part I] GunplaMark 2025-02-04 | After a long hiatus, I'm back with a live mecha model kit build! This one is more than just a simple snap build... I didn't do any custom painting, but I prepared all the parts with panel lining, decals, and top coat, so everything is ready for final assembly. Let's put it together and see if it's as good as the box art makes it look.
LDO Nitehawk-36 + Beacon Probe is finally working, so lets make something awesome! GunplaMark 2025-01-25 | I'm testing out the updated version of the LDO Nitehawk-36 toolhead board on my Voron 2.4, and since I need a big project with lots of print hours I've designed a custom case for the Mac Studio computer that I use to record and edit these videos. Come along on the journey as we print all the parts - using a new carbon fiber infused filament - and get this thing assembled.I'm unsure if any of you will want to print one of these for yourself, since I'm guessing my particular combination of computer and USB hub is pretty uncommon, but if you're interested here are the STLs: printables.com/model/1162843-case-for-mac-studio-computer-with-external-usb-hubI'll also leave some links below to the filament and assembly hardware that I used for this build. These are Amazon affiliate links, and I use them to help fund projects like this one since none of my videos are sponsored. If you choose to click through and support my work, thanks in advance!Polymaker Fiberon filament: amzn.to/4gZR4WJPolymaker PLA Pro (silver): amzn.to/4gh60OWM3 heat set inserts: amzn.to/42nPXf2Assorted M3 screws: amzn.to/3CpXZtg
Prusa MK4S Build - Heated Bed, Y Axis, and Its Done! GunplaMark 2024-12-16 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
Prusa MK4S Build - LCD & Wiring GunplaMark 2024-12-14 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
Prusa MK4S Build - Nextruder GunplaMark 2024-12-13 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
Prusa MK4S Build - Z Axis Assembly GunplaMark 2024-12-12 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
Prusa MK4S Build - X Axis Assembly GunplaMark 2024-12-11 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
Prusa MK4S Build - Frame Assembly GunplaMark 2024-12-10 | I'm building my new Prusa MK4S kit! Eventually we'll convert this into the new Prusa Core One, but for now I want to build and use it as a stock MK4S for a while.I'll be following along with the official assembly guide from here:help.prusa3d.com/wp-content/uploads/generated/original-prusa-mk4s-kit-assembly_2167_en_2024-12-03.pdf
December 2024 Studio and Project Update GunplaMark 2024-12-04 | It's December already! Time for a quick update on where I've been and what I've been working on during my past few months of YouTube silence, and then a look at new 3D printing and Gunpla projects that I have on tap for next year.As always, below are links to things I mentioned in this video:My filament dry box storage system: printables.com/model/952313-filament-dry-box-with-rollersDreded's remix of the filament roller base: printables.com/model/1092840-better-rolling-cereal-dry-box-filament-baseChristmas tree ornament/fidget toy: printables.com/model/332178-christmas-tree-magic-rings-fidget-toy-ornamentDummy 13: printables.com/model/981111-dummy-13-version-10
Building a Portable Camera Arm for Recording and Streaming in My Studio GunplaMark 2024-08-23 | This is an idea that's been kicking around in my brain for a while, so let's see if I can make it work. I have a Rode microphone arm mounted on a shelf next to my build desk with my primary camera attached to it, and that works great for most shots in my studio... but sometimes I wish I could pick up the entire camera arm and move it somewhere else. I'm going to piece together a portable rig that includes the camera arm, an NDI video encoder, wireless microphone, and battery power for everything - resulting in a completely portable camera rig that can also be wireless when I need it to be.As always, below are links to the components I used in this project.Rode microphone arm: amzn.to/3WXE0Z9Zowiebox video encoder: amzn.to/3YVUGTkSmallRig adapter for NP-F batteries: amzn.to/4dTBNF1AnkerWork wireless mic: amzn.to/4fPDAfYIf you have thoughts, questions or suggestions on how I could make this camera arm even better, please leave them below. This project is a work in progress and I'm looking for ways to improve it.Thanks for watching, and have a great day!
Voron 2.4 Dragon Burner Upgrade - Installation & Beacon Probe Testing GunplaMark 2024-08-05 | I'm in the process of replacing the Stealthburner print head in my Voron 2.4 with a smaller and lighter Dragon Burner. The Dragon Burner is all assembled now, so it's time to remove my old print head, install the new one, and test everything out.Below are links to some of the resources I mentioned in this video or used in the build:Filament inlet with ball joint: printables.com/model/633527-voron-24-exhaust-coverUmbilical mount for 2020 extrusions: printables.com/model/556323-voron-canbus-umbilical-pg7Beacon probe documentation: docs.beacon3d.comLDO NiteHawk Documentation: docs.ldomotors.com/en/Toolboard/nitehawk-36Klippain: github.com/Frix-x/klippain
Voron 2.4 Dragon Burner Upgrade - Custom Inline Filament Sensor GunplaMark 2024-07-27 | I'm in the process of replacing the Stealthburner print head in my Voron 2.4 with a smaller and lighter Dragon Burner. Last time we built the WristWatch G2 extruder, and since I'm unable to find a filament sensor that I like to go with this extruder, it's time to design a custom one.Below are links to some of the resources I mentioned in this video:Dragonburner printed parts: github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner/STLs/v0.2X carriage mount for Voron 2.4: github.com/chirpy2605/voron/tree/main/general/Alternative_Voron_Mounts/Modified_Mounts/V1_V2/STLs/MGN12HBeacon probe mount: github.com/chirpy2605/voron/tree/main/general/Alternative_Voron_Mounts/Modified_Mounts/V1_V2/STLs/Probe_MountsExperimental Dragonburner filament cutter: github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner_CutterInline filament sensor that I used as a starting point: printables.com/model/637882-filament-runout-sensor-remix
Dry Box Storage System for 3D Printer Filament, Updated for 2024 and Better than Ever! GunplaMark 2024-07-23 | 2025 UPDATE: There's a new, redesigned version of this system. You can read about it at printables.com/model/1305684-the-ultimate-cereal-container-filament-drybox-offi or watch videos about it at youtube.com/playlist?list=PLKcnRghgPkBOhhZFcSZBe4hVDrwzp48b5.I'm always on the lookout for good ideas when it comes to storing spools of filament and keeping them dry, and I've finally landed on a solution that is perfect for me.This system is heavily inspired by a design from Stephen Wardlaw. His original design and YouTube video are linked down below. I've combined Stephen's design ideas with my own past iterations on filament dry box solutions to come up with the system that I show in this video. All the files needed to print the parts required to assemble one of these dry boxes can be downloaded here:printables.com/model/952313-filament-dry-box-with-rollersBelow are Amazon links to the storage containers and other hardware bits that I used for assembly.Storage containers: amzn.to/4f6PgdUBearings: amzn.to/4ffYrJe (more resistance) or amzn.to/3Xeod9y (less resistance)Hygrometers: amzn.to/46iyXXwBowden couplers: amzn.to/3A3yBI3M3x8 screws and nuts: amzn.to/46iuUdVDesiccant: amzn.to/3YgGhkAIf you try out this dry box design and have suggestions or feedback, please reach out either here in a comment or on the post at Printables. My plan is to continue iterating and improving this design, and also to create an ecosystem of useful accessories to make using these dry boxes easier and more enjoyable.Thanks again to Stephen for the original design inspiration. Here is his version of the dry boxes:printables.com/model/920522-dry-boxes-for-mmu3-filament-feedyoutube.com/watch?v=Xy6M791xVKM&t=3s
Voron 2.4 Dragon Burner Upgrade - WristWatch G2 Extruder Build GunplaMark 2024-07-22 | I'm in the process of replacing the Stealthburner print head in my Voron 2.4 with a smaller and lighter Dragon Burner. We'll start the project by borrowing some parts from an unused Galileo 2 extruder that I already had on hand and rebuilding them into a WristWatch G2 extruder.More info on the WristWatch G2 can be found here: github.com/tetsu97/WristWatch-G2-Extruder/tree/main
Voron 0.2 Mods - BIGTREETECH Knomi v2 GunplaMark 2024-07-11 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit and now it's time for a few mods. In this episode I've decided to move my Knomi touchscreen from my big Voron 2.4 printer, where it wasn't being used, over to the v0 and configure it for use there instead.Below are links to the resources I mentioned in this episode...Various Knomi mounting options for Voron v0 printers:printables.com/model/581023-knomi-dragonburner-for-voron-v0printables.com/model/698082-knomi-dragon-burner-v8printables.com/model/547224-ft-knomi-krigami-mountprintables.com/model/754637-knomi2-kirigami-mountprintables.com/model/622195-v02-stealthskirts-knomi-mountMy remixed Knomi front skirt mount: printables.com/model/940375-v02-stealthskirts-knomi-v2-mountMy Voron V0 config files: github.com/markkendall/voron-v0-config
Voron 0.2 Tuning - Configuring Multiple Build Plates in Orca Slicer GunplaMark 2024-06-18 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit, added a few mods, and now it's time for tuning. In this episode I take a look at several different HoneyBadger build plates and configure Orca slicer to make it easier to switch between them.Below are links to the resources I mentioned in this episode...Orca Slicer: github.com/SoftFever/OrcaSlicerOrca Slice Multiple Bed Types Documentation: github.com/SoftFever/OrcaSlicer/wiki/bed-typesGunpla Gallery: gunplagallery.comMy Voron V0 config files: github.com/markkendall/voron-v0-config
Live Build: MG Gundam AGE-1 Titus [Clear Color Version] GunplaMark 2024-06-14 | Continuing on with my custom painted build of the Gundam Base limited edition AGE-1 clear color kit, this time building the AGE-1 Titus arms and legs to add on to the already completed torso.
Voron 0.2 Tuning - Calibrating a Filament Profile in Orca Slicer GunplaMark 2024-06-11 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit, added a few mods, and now it's time for tuning. In this episode we take a deep dive look at all the calibration tools provided by Orca Slicer, add in a couple other calibration prints that I like to use, and fine tune a custom filament profile for a new spool of filament that I'll be using for additional test prints going forward in this series.Below are links to the resources I mentioned in this episode...Orca Slicer: github.com/SoftFever/OrcaSlicerMy Voron V0 config files: github.com/markkendall/voron-v0-configCaliFlower: https://vector3d.shop/products/califlower-calibration00:00 - Intro & Setup07:50 - Print Temperature15:24 - Flow Rate28:55 - Pressure Advance34:06 - Retraction39:08 - CaliFlower46:50 - Tolerance Tests51:22 - Recap & Recommendations
Voron 0.2 Tuning - Pressure Advance, Retraction & Skew GunplaMark 2024-06-05 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit, added a few mods, and now it's time for tuning. In this episode we'll add some global settings in our Klipper config to calibrate pressure advance, retraction, and adjust for X-Y axis skew.Below are links to the resources I mentioned in this episode...Orca Slicer: github.com/SoftFever/OrcaSlicerCaliFlower: https://vector3d.shop/products/califlower-calibrationVoron V0 Stealth Handles by Maple Leaf Makers: printables.com/model/481575-voron-v0-stealth-handlesIKEA SKADIS Voron V0 (120mm) Build Plate Holder by Ranger: printables.com/model/237862-ikea-skadis-voron-v0-120mm-build-plate-holderSkadis Spool Holder/Roller by CDoucet: printables.com/model/704352-skadis-spool-holderrollerMy Voron V0 config files: github.com/markkendall/voron-v0-config
Voron 0.2 Tuning - Belt Tension Meter GunplaMark 2024-06-03 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit, added a few mods, and now it's time for tuning. In this episode I'll build, calibrate, and test a belt tension meter.Below are links to the resources I mentioned in this episode...Belt Tension Meter by Diyshift: github.com/Diyshift/3D-Printer/tree/main/GT2%20Belt%20Tension%20Meter
Voron 0.2 Mods - Dragon Burner GunplaMark 2024-05-31 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit and now it's time for some modifications. In an attempt to improve both extrusion consistency and part cooling, I've decided to swap out the default Mini Stealth Burner print head with a Dragon Burner fitted with the Orbiter 2.0 extruder.Below are links to the resources I mentioned in this episode...Dragon Burner assembly guide and STLs: github.com/chirpy2605/voron/tree/main/V0/Dragon_BurnerOrbiter 2.0 info: orbiterprojects.com/orbiter-v2-0Toolhead PCB mount for Orbiter 2.0: printables.com/model/642577-voron-v02-umbilical-pcb-mountMy Voron 0 Config: github.com/markkendall/voron-v0-configThe config changes I made for the new extruder: github.com/markkendall/voron-v0-config/commit/29b33b28270c0898e43031d747dd95458b884fe3
Voron 0.2 Mods - Filament Swap Button GunplaMark 2024-05-29 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. I've finished the initial build from the LDO kit and now it's time for some modifications. We'll start by swapping out the right rear foot that contains the filament runout sensor with a replacement that includes a physical button, and then we'll configure that button with some custom Klipper macros to perform a smart filament swap procedure.Below are links to the resources I mentioned in this episode...Replacement foot part with button, by Crys' Livingroom Workbench: printables.com/model/517971-voron-02-foot-with-button-and-filament-runout-sensSKR Pico Pinout Diagram: docs.vorondesign.com/build/electrical/images/skr-pico-pinout.pngLDO Default Voron 0.2 Config File: github.com/MotorDynamicsLab/LDOVoron0/blob/v02/Firmware/printer.cfgMy Updated Config: github.com/markkendall/voron-v0-config
LDO Voron 0.2 Build - Organizing Our Klipper & Mainsail Config GunplaMark 2024-05-25 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. Now that the initial build is complete and the printer is working, I wanted to take a step back and reorganize the printer's Klipper configuration files. In preparation for print tuning and a few hardware mods that I have in mind, ensuring that our configuration files are organized will make those future projects easier.Below are links to the resources I mentioned in this episode...LDO Default Voron 0.2 Config File: github.com/MotorDynamicsLab/LDOVoron0/blob/v02/Firmware/printer.cfgKlipper Adaptive Meshing and Purging: github.com/kyleisah/Klipper-Adaptive-Meshing-PurgingMy Updated Config: github.com/markkendall/voron-v0-config
LDO Voron 0.2 Build - Skirts, Panels & Tophat GunplaMark 2024-05-22 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. In this episode we install the side panels and tophat, enclosing the printer and completing the build.Below are links to the resources I mentioned in this episode...Voron 0.2 Assembly Manual: github.com/VoronDesign/Voron-0/blob/Voron0.2r1/Manuals/VORON_V0.2r1_Assembly_Manual.pdfLDO Voron 0.2 Kit Documentation: docs.ldomotors.com/en/voron/voron02V0 Modesty Mesh by Maple Leaf Makers: printables.com/model/407822-voron-v0-modesty-mesh
LDO Voron 0.2 Build - Orca Slicer Setup & First Print GunplaMark 2024-05-21 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. In this episode we set up Orca Slicer with a Voron v0 preset and send the first ever print to our new printer!Below are links to the resources I mentioned in this episode...Orca Slicer: github.com/SoftFever/OrcaSlicer/releasesLDO Custom Bed Texture: github.com/MotorDynamicsLab/LDOVoron0/tree/v02/Slicer/PlateModelsGundam Head Test Print: printables.com/model/137755-gundam-logo
LDO Voron 0.2 Build - Software Install & Startup Checks GunplaMark 2024-05-20 | I'm building the smallest Voron 3D printer with the goal of tuning it to print with the highest possible precision. In this episode we set up the raspberry pi and klipper firmware, then run through a whole slew of startup checks to make sure everything is wired correctly and ready to print.Below are links to the resources I mentioned in this episode...LDO Wiring Guide: docs.ldomotors.com/en/voron/voron02/wiring_guide_rev_aRaspberry Pi OS Imager: raspberrypi.com/softwareKlipper Installation and Update Helper: github.com/dw-0/kiauhVoron Klipper Firmware Install Guide: docs.vorondesign.com/build/software/skrPico_klipper.htmlLDO Picobilical Firmware Install Guide: docs.ldomotors.com/en/voron/voron01/Picobilical#uploading-firmwareLDO Pre-Made Printer Config FIle: github.com/MotorDynamicsLab/LDOVoron0/tree/v02/FirmwareVoron Initial Startup Checks Guide: docs.vorondesign.com/build/startup
