Warped
Leidenfrost Effect Mayhem - in 4K Slow Motion
updated
► Twitter: twitter.com/Warped_YT
► Facebook: facebook.com/Warped.YT
► Instagram: instagram.com/warped.yt
► IMDB: imdb.com/title/tt33070900/?ref_=fn_al_tt_4
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
It was very interesting to see combustion happen from simply compressing air.
Let me know what you think.
00:00 Intro
02:23 Large Fire Piston with Char Cloth
03:08 Smaller Fire Piston
03:55 Smaller Fire Piston 2nd Attempt
05:06 Diesel Fire Piston
05:31 Diesel Fire Piston 2nd Attempt
06:25 Smaller Diesel Fire Piston
► Twitter: twitter.com/Warped_YT
► Facebook: facebook.com/Warpped.YT
► Instagram: instagram.com/warped.yt
► IMDB: imdb.com/title/tt33070900
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Working on the full video now which is even more extreme, I just hope I don't lose all my money if this thing blows up it's like $4,000 .
#engine #miniature #rc #rccars #car #sound #f1
these firecrackers were so loud and so intense you have to see it to believe it.
► Twitter: twitter.com/WarpPerception
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
even this title was written while my brain was still in an injured state SMH "I was genuinely curious to find out what would happen If these jet engines were run too close to a car so What happens when you put 3 Jet engines against a car? in this experiment, we find out." sure buddy..lol.
For anyone wondering what happened to the car, this car is now going straight to the shredder to be recycled, I wanted to include shredding the car in this video because it's really interesting, but the shredder was closed that day.
And some additional context:
I don't always post videos in the order they are filmed so I did post other videos before this one since I felt I really dropped the ball on this one mentally but ended up deciding to post anyway.
was this a good car?
this car was a complete non-running car, the engine was ran without oil by the old owner and has 3 broken connecting rods and multiple holes in the block, then while the car was waiting for repair during a storm it got flooded, and now it met its match with 3 jet engines.
why I'm doing this type of video?
because the algorithms have been punishing me, I went to collab with Mr Beast from October 2022 to August 2023, then I suffered a brain injury in August 2023, I just started feeling better about a month ago, So all that time I wasn't very active on YouTube and at this point I don't even care anymore...
But I was genuinely curious to find out what would happen If these jet engines were ran too close to a car, not to just destroy a car, but this car was headed to the crusher and I decided to use it for this experiment before it got crushed.
Thanks for reading this video description..lbvs.
► Twitter: twitter.com/WarpPerception
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Download the FREE Upside App at https://upside.app.link/warped to
get an extra 25 cents back for every gallon on your first tank of gas.
I built a jet go-kart for Danny Duncan and drove it to his house to give it to him in person and this was also my destination, The total round trip including stops was 3500 Miles and I used 76.2 gallons of Diesel which brought my actual Miles Per Gallon 45.69 MPG in my All Wheel Drive Tesla.
I had quite a few issues along the way and I included all of that in this video.
UPSIDE APP: bit.ly/Warped-Upside
Digital Dash Info: DD-EFI and AMPEFI on bit.ly/DIY-Autotune
Thanks to Mike @mikemasse6615 YT and @mikemasse6615 IG
CHAPTERS:
00:00 Intro
00:35 Danny Duncan
00:46 Fixing Tesla Cooling System
01:40 Modifying Exhaust
02:22 D&D Digital Dash
02:46 installing sensors
03:55 Build Jet Go-Kart
04:55 Start of Road Trip
06:43 leaving Tesla overnight charging
09:25 The Tail of the Dragon
11:27 Got To Gainesville
12:22 Fixing Oil Leak
14:37 Coolant Leak
15:44 Danny's House
15:57 Messing Austin
16:57 Danny Showed Up
17:28 Golf Cart City
17:36 Building Jet Go-Kart
17:47 Starting Jet Go-Kart
18:22 Danny Tests Go-Kart
19:28 Ripped Coolant Pipe
21:26 Fixing Exhaust
22:08 On our way back
24:06 Tesla Electrical Fire
24:59 Petting Zoo
26:02 Miles Per Gallon
► Twitter: twitter.com/WarpPerception
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
The 3D Printers I Used Here: bit.ly/Warped-Formlabs
Links to where I bought the engine if you're interested:
TOYAN FS-L400BGC Engine ➜ bit.ly/Warped-FS-L400
More TOYAN Engines & Parts ➜ bit.ly/Warped-Other-Engines-EngineDIY
► Twitter: twitter.com/WarpPerception
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Based on the CentraMatic Wheel balancer design and used with counteract balance beads.
CHAPTERS
00;00 Intro
00:24 Centramatic Balancers
01:08 Checking Balance
01:44 Testing Balance Beads
02:24 Testing Steel Balls
02:44 Tire ASMR
03:36 Optical Illusion
04:20 Testing Colored Beads
05:53 How Balance Beads work
► Twitter: twitter.com/Warped_YT
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Balance beads are supposed to automatically balance your tire out, or you can use them in already balanced tires.
It's really interesting to see how the balance beads work from an inside the tire perspective.
This was a hugely requested video on my previous putting a GoPro inside of a tire video So thank you too all that made that request.
Chapters:
00:00 Intro
00:10 Badly Dry Rotted Tires
00:39 The Balance Beads
01:09 Mounting GoPro
01:36 Putting balance Beads In Tire
03:00 Wheel On Balancer
04:29 Reversing
04:50 Driving Low Speed
05:27 Driving Med Speed
06:12 Driving High Speed
07:29 Removing GoPro
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
☢► IMDB: http://www.imdb.com/title/tt5548028/?
► Twitter: twitter.com/WarpPerception
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
This is one of the funnest projects I filmed, I'm doing more like it this year after being on the beach in Florida for 3 years with @danny and Wuhan gang.... It was a blast but time to get back to making Xtreme videos again.
#cars #streets #badroads
Insta360 X3 bit.ly/WarpedX310off .
-- Affiliate gift is 3m invisible selfie stick - $100USD value.
— The gift will go to the first 15 followers"
First 15 People will receive a complimentary 3-meter selfie stick simply by purchasing through your affiliate link—no special action required!
LINK bit.ly/WarpedX310off
A lot of people ask me about this particular X3 camera and they're running a promotion right now so I figured I would try to help everybody out with some sort of discount code.
Let me know what you think in the comments below and have a merry Xmas... Stay happy and stay Sane.
📷 Shot on @insta360X3
DISCOUNT LINK for Cameras:
bit.ly/WarpedX310off
#gokart #karting #extreme #drift #insta360 #insta360x3 #insta360wheels #reallifegta
This Jet go-kart was so insanely fast but I didn't show all the numbers compared to a shifter cart because in this video I just built it and tested it, in the next video I will be racing it, Let me know what you think in the comments below but I can't wait to get this thing on the track next.
► Twitter: twitter.com/WarpPerception
► Facebook: facebook.com/WarpPerception
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
In the previous jet go-kart video I did everything except for a top-speed run, so here it is, I thought it was kind of weak because I was expecting a lot more but the wind resistance is much stronger than You think it would be.
I am editing this video after a Brain injury I sustained recently, so I'm not seeing things exactly the same way I used to right now, I hope this video is edited well lol.
let me know what you think and wish me luck on posting more videos! these are pretty difficult sometimes.
Chapters
00:00 Intro
00:18 Building Jet Go-Kart
00:58 Rebuilding Jet Junk Go-Kart
02:11 Testing at 1st Track
05:52 End of 1st Test Run
07:00 Top Speed Test Location
07:48 Top Speed Run
08:41 End of Top Speed Run
Instagram: instagram.com/warped.perception
Facebook: facebook.com/WarpPerception
IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and check out my other videos, Thanks!
By: Matt Mikka
It actually sounds pretty sick.
I got the engine from: enginediy.com
I will update in the comments if I'm able to get a promo or discount code.
UPDATE: I got a discount code.
Extra 10% Off Coupon Code: Warped
78cc ENJOMOR V8: bit.ly/3yHSDUF
V8 Engine Models: bit.ly/3sCNKK3
More Engines from EngineDIY: enginediy.com/?ref=g9r4zdbpwa
Thanks!
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I go on a 2500 Mile Road trip to ride the Jet Powered Pontoon Boat then to New York City, then to build the Jet Powered Hovercraft and Finally to LiquidPiston to see their newest engine that may be the next Diesel engine I put in the Tesla to power it.
This is Part 2 of the Cordless Tesla Here is Part 1:
Cordless Tesla Part 1 youtu.be/hHhf223jGIE
More info on Liquid Piston Here: invest.liquidpiston.com
Previous See-Thru Liquid Piston Engine: youtu.be/jLtyNtf9_ew
Chapters:
00:00 Intro
00:38 Starting Kohler Diesel
00:59 Building Turbo System
01:53 Install Engine in Tesla
02:37 Engines In Tesla
02:59 Starting Diesel Tesla
03:59 Start Road Trip
04:27 Jet Pontoon Boat
07:11 Detroit
08:31 Cleveland
09:57 Heading to New York
10:54 New York City
11:28 Manhattan
12:05 Salem Massachusetts
12:29 Jet Powered Hovercraft
14:18 Test Jet Hovercraft
15:09 LiquidPiston
17:06 On Our Way Home
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
► Twitter: twitter.com/Warped_YT
► Facebook: facebook.com/Warped.yt
► Instagram: instagram.com/warped.perception
► IMDB: http://www.imdb.com/title/tt5548028/?
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
The Fuel I'm burning here is Hydrogenated Fuel which I am told by the manufacturer is almost zero emissions, I may or may not do my next trip using this fuel but depends on availability.
It just made perfect sense to me to adapt a power plant generator to my modified Model S Tesla and do a road trip.
This is the first version of the cordless Tesla which is burning gasoline to charge the car instead of the conventional plug-in charger.
The car not only charges itself while it's sitting and parked but also while driving the entire time.
Just for reference with the mpg number this car is almost 1000 horsepower all wheel drive, I didn't go into those details in the video because I didn't want to make it confusing.
This is not my typical video but I absolutely had to document my progress with my project here and share it with everybody.
To clarify I did have to stop for about 5 to 6 hours a day while the car continued to charge itself back up since it's using more energy driving then it's making.
All of those stops and lack of sleep is one of the reasons I was dead tired for almost the entire trip, some of those days I was so tired I could barely speak.
I also made sure to make a few stops along the way that I thought were pretty cool to make the video more exciting.
I'm curious to hear what everybody thinks in the comments below please don't hesitate to leave your opinion I think you are going to like what I have coming in the near future with this car.
Heres Part 2 of the Cordless Tesla.
Cordless Tesla Turbo Diesel youtu.be/seHWJMKwOQQ
youtube.com/c/LiveLearnProjects
Chapters
00:00 Intro
00:27 Building Cordless Tesla
01:07 Testing Powerplant
01:34 Installing Engine
02:08 Done Building
02:30 Engine Start
03:03 1st Problem
03:23 At Jurassic Gardens
04:00 At Jet Pontoon Boat
07:05 Got Pulled Over
08:01 Charging Overnight
08:30 Tesla Hybrid Mode
09:16 Detroit
10:40 Cedar Point
12:39 Mackinaw Island
13:42 Bier Distillery
14:20 Kohler WI
14:50 Cordless Tesla MPG Numbers
15:08 My Thoughts
P.S. if anyone complains about the audio on this video, well the audio was an absolute mess, the generator I built was so noisy it was almost impossible to get any sort of sanity out of the audio.
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
The electric scooter that I'm using is an all-wheel drive Fiido Beast, the jet turbine has almost 100 lb of thrust, it's a really crazy project and one of the few projects that I was actually a little afraid of a little.
The scooter has a combined weight with me as the rider of about 300 lb, so that is quite the power-to-weight ratio.
The scooter was a ton of fun even without the jet engine I have taken this thing on road Off-Road and I usually get to the store faster on the scooter than in the car, in the city at least.
Here's Links to the Fiido Beast Electric Scooter and the HydroDiesel, after riding this scooter I never looked at any other scooter the same again, I have so much fun on this thing!.
Scooter Link: bit.ly/WarpedPerceptionFiido200_Off
HydroDiesel: bit.ly/HydroDiesel-Warped-Perception
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
This engine is so small it's almost unbelievable to me that it runs at all but it does.
once things, especially engines or machines get this small it becomes very difficult to maintain the tight tolerances needed to have a well-running machine, but to my surprise, the engine ran very well.
Link to Newest Version of the Miniature Rotary Engine at Engine DIY: bit.ly/WpMiniRotaryEngine
See-Thru Rotary Engine in Slow Motion: youtu.be/pCteBhr4dGY
Chapters:
00:00 Intro
00:32 Opening Engine
03:16 Start Attempt
04:03 1st Full Start
04:53 2nd Full Start
05:18 Max RPM Run
06:32 Full Throttle Run
06:50 Rotary is Screaming
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I then film it in slow motion with the high-speed camera to get a better look at how the jet engine works but it wasn't such a big difference.
The amount of heat generated inside of the engine only a few millimeters from the outside cover was pretty impressive.
At the end I did inject fog into the intake of the jet engine to try and visualize the airflow into the engine and how the engine is ingesting air.
Chapters:
00:00 Intro
00:16 Building Jet Engine
00:28 Balancing Engine
01:30 Thermodynamic Cycle
02:03 Building See-Thru Jet
03:35 Starting Engine
06:18 Airflow Test
08:36 Outro
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I first set up the Mini V8 engine, then I open it up to show everybody what's inside, take a look at the bearings the valves the cam.
I then run this engine at full throttle after that I make some exhaust modifications to try to get a better more realistic sound, then I film the engine in slow motion to show everyone how the valve train works with the cams rocker arms and lifter buckets.
About the engine: this is the new Miniature V8 Nitro Engine Toyan / Howan 28cc 2.7 Cubic inch V8 Engine sold by Engine DIY, it's a brand new product that will be released in June.
Here's links to the engine:
Extra 10% Off Coupon Code: Warped
TOYAN V8 Engine ➜ bit.ly/3sGLdOZ
TOYAN V8 Starter Kit ➜ bit.ly/3MpA2SJ
TOYAN V8 Other Accessories ➜ bit.ly/3FSXBAK
TOYAN Rotary Engines ➜ bit.ly/3sH92pW
Other TOYAN Engine & Parts ➜ bit.ly/3yH5lV1
Other V8 Engines ➜ bit.ly/3sCNKK3
Chapters
0:00 Intro
0:49 Opening Engine
2:50 1st Start-up
4:23 Start-up w/mods
5:27 Max RPM Run
6:53 Run No Headers
8:08 Slow Motion Run
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
this thing sounds so similar to a real engine just scaled down.
this is a nearly exact scale replica of a Harley Davidson panhead engine it is very very impressive.
ENGINE LINKS and Discount Code:
Extra 10% off code:wp
V2 engine: bit.ly/3kVGxAF
V2 Engine accessories: bit.ly/3Fbly5Y
other 4 stroke engines: bit.ly/3ycNCUX
Text-To-Shop Link:
Android: play.google.com/store/apps/details?id=com.texttoshop.bst
App Store: apps.apple.com/us/app/text-to-shop/id1576597222
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I also feed the intercooler some fog through the air filter and through the turbo and film it with the high-speed camera in slow motion to allow us to see the flow patterns and how the air distributes in the intercooler.
then I go ahead and start cranking up the boost to see how much pressure the intercooler can actually hold.
Definitely a little different than I thought it was going to be, I always thought that the air mostly flowed in the lower half of the intercooler but as you can see in the video due to the static pressure resistance and air taking the easiest path it seems to even out over the entire length of the intercooler.
it was also really cool to see how well the intercooler worked at cooling that air beyond what I ever thought.
here's a link to the first video:
See Thru Intercooler Part 1: youtu.be/bGFWG_3Bfew
Thanks to AMS Performance for all there help and being super cool and professional.
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
First I get the scrap copper, Design my part in CAD, then I melt and cast the metal into a mould, Machine it and finish it in the CNC mill and finally cut out a see-through back cover with the waterjet to see inside of the water block as its working
Originally I was going to buy solid pieces of metal and machine my parts, but unfortunately all of the material that I need, the size I need it is not available for probably at least a few months.
That's why I decided to take scrap copper, melt it down in a furnace and shape it into what I need to make my parts and I now have my light engine fully operational at full power.
Fun Fact: Any static in this video was caused by 12μm Carbon dust that made its way into my camera and equipment...fun times.
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
This build was extremely in-depth, I listened to what everyone was asking for in the past videos and I built almost every single part from the ground up, I counted over 200 parts in total.
The next project I'm going to be doing with this car is going to be even more extreme.
Not only did I make over 200 parts but I also had 88 folders full of video footage because the build took about 42 days total and my schedule was heavily affected by raw material shortages.
All the machines and equipment I use are on my Website: www.ShopWarpedPerception.com
But I do have a lot of other footage and cool videos that I took while filming this episode, I'm going to be posting them on my second Channel called "Unthinkable" Here's a link to that channel youtube.com/channel/UC9gTnRWNLc5qIED3thaRe0w and I will have the first jet-powered Tesla-related videos uploaded shortly after this one posts.
Thanks for watching and thanks for everybody's support!!
I'm gearing up to make more intense episodes so look out for those.
Chapters:
00:00 Intro
00:22 Building Jet Control Panels
03:38 Building Rear Controls
04:29 Attaching Jet Engines
05:59 Installing Fuel Tank
06:20 Build Fuel Gauge
06:29 Jet Engines All Done
08:03 Test Run
09:18 Blasting Alley Full Thrust
10:30 Driving on Freeway Jet Power
13:50 filling Up With Fuel
14:24 0-60 Runs at Strip
15:42 0-60 Run 1 No Jet Power
16:15 Starting Jet Engines
17:19 0-60 Run 1 with Jet Power
18:09 0-60 Run 2 with Jet Power
19:35 Why I Placed Engines
20:25 Outro and More Info
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Here's a link for Sherlock's SkyRanch Jet Club in Hobart Indiana. SkyRanchJetClub@Gmail.com
he's currently in the process of repairing the airport and bringing it up to par I'm pretty sure when it's all done it's going to be absolutely beautiful.
here's a link to my Website as well www.ShopWarpedPerception.com
thanks for watching!
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome!
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I also show a clip of the see-thru Liquid Piston Rotary Running on Hydrogen in Slow Motion to see what is happening inside this new revolutionary Rotary Engine While it's running on Hydrogen and how it's so much different than the Wankel Rotary Engine.
I also show the original see-thru Mini Wankel Rotary that I built in Slow Motion for a comparision.
I cant wait to see where they go with the hydrogen-powered rotary, seeing as the only byproduct of burning hydrogen is air and water this is a fuel that just might carry us into the future, who knows but tell me what you think in the comments.
*Cleared For Public Release
INFO AND LINKS
Invest in LiquidPiston Engine Here: http://bit.ly/LiquidPiston-WP
LiquidPiston Website: www.LiquidPiston.com
High-Efficiency Hybrid Cycle: en.wikipedia.org/wiki/High-efficiency_hybrid_cycle
Otto Cycle: en.wikipedia.org/wiki/Otto_cycle
Atkinson Cycle: en.wikipedia.org/wiki/Atkinson_cycle
Diesel Cycle: en.wikipedia.org/wiki/Diesel_cycle
Previous See-Thru Liquid Piston Engine In Slow Motion Episode: youtu.be/jLtyNtf9_ew
Evolution of the LiquidPiston Rotary: youtu.be/I3pNcf0pm3g
CHAPTERS
00:00 Intro
00:16 About Hydrogen Fuel
00:44 Hydrogen Go-Kart Intro
01:14 Hydrogen Rotary In Slow Motion
02:04 Wankel Rotary in Slow Motion
02:39 Hydrogen Go-Kart Drive
03:46 Starting Engine Go-Kart
04:48 2nd Drive Running Good
05:36 Outro
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I know there was a lot of talking in this video and it was kind of long, but I felt it was a very important video because it can possibly help out a lot of Tesla owners, most of the Tesla owners I talked to were terrified of running out of battery power because they said they would either have to have the car towed by a tow truck or wait for Tesla service, and to my surprise none of that is necessary.
I mean the range anxiety of these cars is very real and it is not a good feeling so I'm hoping that this video helps someone.
also I was very sick when we filmed this video, that's why my voice sounds sort of muffled.
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/Warped.YT
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
the torque was out of this world it was so much fun to drive, the top speed was decent but I know for sure if I tweak it I can do better, not sure if I'm going to do another episode on this one or not, if I do I'm going to keep it very simple or I just make a larger drive gear to see what the maximum is with this engine.
everyone asked me about what equipment I use and especially about the Go2 action camera and the drone, so below I've included links to everything, the camera, the drone, and to my website in case you want to check out all the other products that I've been using in other episodes, also another thing many people have been asking me about is the water jet I use, so I also put the water jet on my website so everything's in one place.
thanks for watching hopefully enjoyed that video and definitely let me know if you want to see a follow-up with this turbo diesel Go-Kart with a larger drive gear, I'm definitely going to have to make that one because they don't sell it.
LINKS BELOW
INSTA-360 Go2 CAMERA: shopwarpedperception.com/product/insta360-go2
KOHLER DIESEL ENGINE: shopwarpedperception.com/product/10-hp-kohler-diesel-engine
DRONE: shopwarpedperception.com/product/skydio-2-autonomus-drone
WATERJET: shopwarpedperception.com/product/protomax-waterjet
Everything Else will be on my website: shopwarpedperception.com and if anyone is interested in the adaptor plate and torque converter let me know in the comments and I will add them to my site.
Thanks!
Jet-Powered Go-Kart Episode: youtu.be/nJr-RmJxtDc
1st Turbo Diesel Go-Kart Episode: youtu.be/Q0d3E-R3SvU
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
This engine reminds me of the Mazda Wankle rotary engine but the difference is it seems like they have solved all of the issues that the Mazda engine had.
I am very excited to see where this engine is going I would love to see this thing powering a car because the power to weight ratio is absolutely insane and the thermal efficiency is out of this world.
definitely check out my other channel for all of the interviews from the inventors and going over the previous versions of this engine.
*Cleared For Public Release
INFO AND LINKS
LiquidPiston Engine: http://bit.ly/LiquidPiston-WP
High Efficiency Hybrid Cycle: en.wikipedia.org/wiki/High-efficiency_hybrid_cycle
Otto Cycle: en.wikipedia.org/wiki/Otto_cycle
Atkinson Cycle: en.wikipedia.org/wiki/Atkinson_cycle
Diesel Cycle: en.wikipedia.org/wiki/Diesel_cycle
CHAPTERS
00:00 Intro
00:41 Cutting Parts WaterJet
01:07 Arriving at LiquidPiston
01:26 LiquidPiston Inventors
01:56 How LiquidPiston Works
04:58 See-Thru LiquidPiston Assembled
06:11 1St Run on Propane
07:15 2nd Run On Propane Lights Off
08:29 Run On Acetelyne
09:40 Run on Gasoline
11:10 outro and Follow-Up
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
For those of you who are curious about the inside of the dishwasher and how a dishwasher works inside and does its job then this video is for you.
Mostly I was really curious about how the dish soap gets dispensed which I haven't ever seen on video before.
and Since I Know Everyones going to ask me, Heres a Link to the 360 camera: store.insta360.com/product/one_r?insrc=INRK89J
Chapters:
00:00 Intro
00:55 Camera Mounting
01:47 Start Cycle
02:13 Filling
02:27 Wetting
03:09 Rinsing
04:16 Drain & Fill
04:25 Wash Cycle
05:58 Dispensing Soap
06:42 High-Pressure Wash
08:25 Heating
11:19 Drain & Fill
11:24 Rinsing
11:44 Heating and Sanitizing
12:32 Final Rinse & Drain
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
here's a link to the Insta360 GO 2:
bit.ly/Go2-Camera-WP
I had this idea for a really long time I'll ago but I was originally going to use a homemade turbojet that I was going to build, however, the weight of this, the sheer size held me back from building it, also it didn't look really pretty.
I tried to keep it very compact, light and extremely simple, I think I succeeded.
as for performance it was pretty insane the acceleration from 0 to 20 was kind of slow but as soon as you had 20 miles per hour it's a constant push once you hit 40 the push feels four times as strong and it starts getting scary really fast.
I'm totally going to set this up on a nice smooth stretch of road soon to see what kind of top speed I can hit, or at least see how it feels at higher speeds.
CHAPTERS
00:00 Intro
01:21 Build
04:16 Go Kart Finished
04:49 Proving Grounds
07:05 Starting Jet Kart
09:08 Driving Jet Kart
13:36 My Favorite Part
14:40 My 2nd Favorite Part
15:06 Follow-Up
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I've seen people on YouTube recently trying to make boost with these mini superchargers, with very little boost being made, all I can do when I watch these videos is shake my head, so I decided to show them how it's done!..
I made about 3 PSI of boost here which some may think is substantial but I think is pretty elementary, I'm looking for some serious boost pressure in the future.
in this episode I build the entire compound supercharger setup, and at the end of the video I tear the entire engine down.
originally I was going to include the full tear down video but I decided not to because I found it boring but if you decide that's something you want to see, just let me know but in the next video with this engine where I use the toyan L400 engine For an upcoming project I'm probably going to build the entire engine from scratch and make some modifications along the way.
tell me what you think about this video and below please find the links to the engine I use in this video as well as the app Text To Shop.
thanks for watching and if there's any additional information you want to see in the description here let me know and I will include it in the future.
TEXT TO SHOP
play.google.com/store/apps/details?id=com.texttoshop.bst
Toyan 4 Cylinder Engine: bit.ly/3ql2jPp
Other Toyan Engines: bit.ly/2HXd3lM
10% Off Coupon Code: Warped
CHAPTERS:
00:05 Intro
00:40 SuperCharger
00:45 SuperCharger Build
04:26 SuperChargers Finished
06:06 1st Test Run
06:52 2nd Test Run
09:49 3rd Run With Boost
10:48 4th Run Max Boost
13:27 Text To Shop App
14:42 Engine Teardown ( Bonus Footage)
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Needless to say you can watch the video and tell me what you think but for me there's better snow removal methods out there that's for sure.
Are you used about 3 gallons of fuel for my run, definitely not a cost-effective way to remove Snow either..lol.
This engine is making about 70 lb of thrust and I ran jet a fuel.
I did have an idea where I can mount this jet engine to my machine and drive around clearing snow, however I don't want to do that yet simply because I need this engine to stay in good condition for my upcoming episodes.
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I first build a jet dynamometer then I put all four fuels to the test with some intense full-throttle runs, the results are very surprising.
The test I run on each fuel is 2 straight 20-second Dyno pulls, this is much much longer than anybody would hold the throttle in the full power position under any use except for maybe a fighter jet..lol.
Chapter Markers Below:
00:00 Intro
00:27 Building Jet Dyno
02:52 Dyno Done
03:18 Fuels I'm Using
03:50 Ice In Fuel
04:58 Thrust Test JET A
07:56 Thrust Test DIESEL
12:03 Thrust Test BioDiesel
15:41 Thrust test HydroDiesel
18:52 Summary of Results
19:07 Sending to Project Farm
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I then take the JetCat turbine apart and the starter to see what went wrong, then we start up 2 more turbines after that.
This is about 14 minutes of non-stop jet engine action hope you enjoy.
I figured I would do some videos with these little jet engines since almost everyone enjoys these little jet engines and my friend wanted to bring them over and mount them to my stand to test them.
Personally I love hearing these engines and seeing these engines run.
I just can't get enough of seeing jet engines run there's something about it, so hopefully you enjoyed this video let me know if you want some more
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I do a dirt and gravel test, a mud test and I do a cross-sectional view under the microscope to see if we can actually see the ceramic coating on top of the paint and the results may surprise you because I know they blew my mind.
it looks like the ceramic coating is not actually ceramic at all it is quartz, some way they have figured out how to dilute quartz or make artificial quartz suspended in a liquid form, which to me was very amazing.
the results of the ceramic coating were very unexpected and off of this video I have came up with a lot of new ideas and ways I could use this to make my life a lot easier.
link to coating: http://Avl.kg/warped
thanks for watching!
Program Guide
00:00 Intro
00:24 What Is Ceramic Coating?
01:35 What Car I'm Using
01:56 1st Location
02:35 Dirt Tornado Test No-Coating
03:56 Mud Test No-Coating
06:32 Applying Coating
09:32 Dirt Tornado Test Coated
11:39 Mud Test Coated
15:03 Microscope Test
18:16 Outro
.↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
The Revving sound was beautiful and I was absolutely amazed by how beautiful this engine is, then I found out it redlines at 13,500 RPM.
I show the engine and its entirety and I run it a few times in preparation for the upcoming episodes I have with this engine.
I was Very Impressed with this little engine, the build quality was out of this world and I was genuinely blown away by how incredible it looks.
it was a crazy little engine and it sounds absolutely intense!
The link to the engine is below as well as some related videos
Toyan 4 Cylinder Engine: bit.ly/3ql2jPp
Toyan Engine: bit.ly/2HXd3lM
10% Off Coupon Code: Warped
GoPro in the Intake Of The Supra : youtu.be/tMhA_ek0Awk
Full Video Of MR2 3S-GTE Turbo Sound: youtu.be/y8dFXk_dviA
Program guide:
00:00 Intro
00:33 What I think of the Engine
01:37 Setting it Up
02:13 Test Run to fill water
04:12 Test Run
06:28 FLIR Run
07:11 Outro
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
I'm thinking of making a warped perception episode on how cellphones work, tell me what you think!
P.S I know this has been done before but I also wanted to test my new rigs for 4K Ultra Macro which worked and looked amazing!
↓↓Social media Links↓↓
🐦 ► Twitter: twitter.com/WarpPerception
👍 ► Facebook: facebook.com/WarpPerception
◙ ► Instagram: instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka