DIY Machines
Build a COLOUR E-INK DASHBOARD - Weather | Calendar | Photos | News...
updated
This video is sponsored by PCBway. 👇 More info below 👇
In this video, I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines, robotics, and other DIY electronics projects. I’ll guide you through the wiring, Arduino code, and how to tune StallGuard for accurate, reliable homing. Whether you’re building a CoreXY, a custom motion control system, or just want to learn more about stepper motor drivers, this is a great place to start. Let’s build smarter!
List of items used in this project and where to find them:
■ RP2040-Zero: geni.us/Waveshare-RP2040Zero
■ Mini560 DC-DC Buck Converter 5v: geni.us/Mini560
■ BIGTREETECH TMC2209 V1.3: geni.us/TMC2209
■ Momentary Button: geni.us/6x6TactileButton
■ 1k Resistor: geni.us/Ufa2s
■ Sliding Switch: geni.us/SlideSwitchSPDT
■ Screw Terminal PCB Mount 5mm pitch: geni.us/PCBScrewTerminals
■ Headers and Pins: geni.us/HeadersAndPins
■ DC Barrel - PCB Mounted: geni.us/DCBarrelPCBMount
■ 3D Printer Filament: 3djake.uk
■ Some M3x8 bolts: geni.us/NutsAndBolts
■ 12v Power Supply (2 amp+): geni.us/12VPowerSupply2A
For revised circuit design (version 3 as of July 2025) you'll also need:
■ Diode 1N5819 (x1): geni.us/Diode1N5819
■ Electrolytic Capacitor 100µF, 35V, Low ESR (x1): geni.us/Capacitor100uF35vESR
■ Andrea's Code: github.com/AndreaFavero71/stepper_sensorless_homing
■ MicroPython 1.24.1: micropython.org/download/PIMORONI_TINY2040
■ Thonny Python IDE: thonny.org
Get Kit of parts from Etsy to build your own: diymachines.etsy.com/uk/listing/4326334730/sensorless-homing-electronics-kit
■ Projects PCB: pcbway.com/project/shareproject/Sensorless_Homing_in_Python_RP2040_TMC2209_dae5adca.html
or get the PCB on Etsy: diymachines.etsy.com/uk/listing/4326340141/sensorless-homing-pcb-only
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk
printables.com/model/1332530-sensorless-homing-in-python-rp2040-tmc2209
Discord Channel for project specific help and advice: discord.gg/WdSkc34xR3
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
00:00 Intro
00:47 Pros and Cons of Sensorless Homing
01:40 Stepper Motor & Back EMF Overview
02:59 Stepper Motor Naming
03:43 Assembling Demo
06:25 Demonstration of Sensorless Homing
09:00 StallGuard Explanation
11:31 Uploading your code
13:19 Code Overview
16:12 Running your demo
17:12 Tweaking your own build
A ultrasonic sensor / detector / measurer is a great little module, and they're cheap enough to keep several to hand for when you need it next.
diymachines.co.uk/hc-sr04-ultrasonic-sensor
To follow along with the example project in the video you will need a few items, the links automatically redirect you to right item on your local Amazon site:
■ HC-SR04 Ultrasonic Sensor: geni.us/HC-SR04_Ultrasonic
■ Arduino Uno: geni.us/ArduinoUno
■ Jumper wires: geni.us/JumperWires
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
CODE
The code, wiring diagram and software instructions can be downloaded for free from here: diymachines.co.uk/hc-sr04-ultrasonic-sensor
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
00:00 Intro
00:28 What does it look like / Is it made of?
01:29 What can it be used for?
01:49 How does it work?
03:05 How to use it - Example circuit and code
04:11 Understanding the code
05:14 Explanation of 'pulseIn' function
06:37 When it might not work properly
09:34 Outtakes
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. Get a PCB directly from PCBWay here: pcbway.com/project/shareproject/Hollow_Shadow_Clock_c2d6052e.html
The Hollow Shadow Clock is a time telling marvel. First of, can you figure out how the hour hand is being controlled? Once you’ve solved that, continue to marvel at its larger then life ability to project an analogue clock face onto any surface. Control the colour and brightness with two discreet buttons, or connect to your clock via its integrated web-server and WiFi connection to program an automated weekly schedule. Have it wake you up in the morning, or light up to remind you it’s time to finish work!
This is a predominately 3D printed project and my detailed instructions will ensure you have every success in building one of your own.
This project is based on the Hollow Clock project by Shiura: shiura.com
Buy a kit of parts from Etsy here: diymachines.etsy.com/uk/listing/1805326144/hollow-shadow-clock-electronics-kit
Download 3D Printing files here: printables.com/model/1063081-hollow-shadow-clock
List of items used in this project and where to find them separately:
■ M3 Nuts (x3): geni.us/M3Bolts
■ M3x8 Bolts (x6): geni.us/M3Bolts
■ LED 3W WS2811(x1): geni.us/3wWS2811LED
■ ULN2003 (x1): geni.us/ULN2003
■ Ceramic Capacitor - 10nF (x1): geni.us/CeramicCapacitors
■ Stepper Motor (x1): geni.us/28BYJ-48-StepperMotor
■ 12mm Tactile Button (x2): geni.us/12mmTallTactile
■ DC Female Barrel Connector (x1): geni.us/HighAmpDCBarrel
■ Slide Switch (x1): geni.us/SlideSwitchSPDT
■ ESP8266 Dev Board: geni.us/wemosD1
■ 3x8mm Magnets (x3): geni.us/3x8mmMagnets
■ Self Tapping Screw M2x6mm (x3): geni.us/2mmSelfTappingScrews
■ Self Tapping Screw M2x12mm (1): geni.us/2mmSelfTappingScrews
■ Projects PCB (x1) (Link further below)
■ Power Supply 5v (x1) geni.us/5vPowerSupply5a
■ 3D Jakes filament: geni.us/3DJake
■ Projects PCB: pcbway.com/project/shareproject/Hollow_Shadow_Clock_c2d6052e.html
I've been using the OmniFixo 'helping hands' for this project and have found they are significantly better than alligator clips and traditional methods. I've not been paid to say this - but they are something I genuinely personally recommend.
Find out more here: omnifixo.com/en-gb
I use a Prusa MK4S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only. DIY Projects are purely “at your own risk”. Unfamiliarity with tools and processes can be dangerous. DIY Machines Ltd will not be held responsible for any injury due to the misuse or misunderstanding of any DIY project.
This video is sponsored by PCBway. 👇 More info below 👇
I’m Lewis and we’re going to be diving into the fantastic world of 3D-printed stained glass creations filled with gorgeous, colourful resin! 🌈🪟
These are great fun to create on your own or alongside other makers and make for fantastically gift-able personal items.
List of items used in this project and where to find them:
■ Resin: geni.us/UVResistantResin (10% discount code on Amazon: 'DIYMachines')
■ Mica powders: geni.us/MicaPowder
■ Colour Pigments: geni.us/EpoxyDye
■ Printing filament:
One transparent: 3djake.uk/3djake/petg-clear-1
And another in the colour of your choice: 3djake.uk/3djake/petg-black-2
DIY Machines International Etsy Store:
■ http://diymachines.etsy.com
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, FAQ and more projects etc can be found here:
diymachines.co.uk
Pre-printed designs (just add resin):
diymachines.etsy.com/listing/1713383908
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
After CNC'ing the text on my Snapmaker Artisan I painted the engraving with primer and then black enamel paint. After sanding to remove all the old layers of varnish and discoloured wood I was left with a beautiful solid wood grain which was brought to life with a few coats of boiled linseed oil.
My neighbour loves the sign and I enjoyed the challenge of his request. 😁
ETSY Store: etsy.com/uk/shop/DIYMachines
------------------------------------------
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. 👇 More info below 👇
Laser Cut or 3D Print these amazing and customisable coasters.
Etsy Store Kits with or without pre-cut wood: diymachines.etsy.com/listing/1693030560
diymachines.co.uk/make-your-own-kinetic-coasters
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
-------------------------
-- Creality Falcon 2 22w Laser Cutter & Engraver: --
Amazon: geni.us/CrealityFalcon2-22w
UK: uk.crealityfalcon.com/products/falcon2-22w-laser-engraver-cutter
Use Code: FN1106D
US: crealityfalcon.com/products/falcon2-22w-laser-engraver-cutter
Use Code: NEWFALCON
-------------------------
List of items used in this project and where to find them:
■ 3mm Sheet Plywood or similar geni.us/3mmPlywood
■ AA Battery Holders (x2) geni.us/AABatteryPCBMount
■ Small Geared DC Motor (x1) geni.us/MiniGearedDCMotor
■ Super glue geni.us/SuperGlueLongNeck
■ Tiny magnets 3x3mm (4 for the base, 8x per coaster) geni.us/3x3mmMagnet
■ Batteries geni.us/AABatteries
■ Reed switches - Normally Open Type. (x4) geni.us/ReedSwitch
■ And some Bolts and screws (M4x5mm x four and M1.6x3mm x two)
ETSY STORE KITS with or without pre-cut wood: diymachines.etsy.com/listing/1693030560
■ Projects PCB: pcbway.com/project/shareproject/KINETIC_COASTERS_with_a_TWIST_Laser_or_3D_Print_some_DIY_Magic_80cf8d3e.html
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, Laser Cut parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/make-your-own-kinetic-coasters
Find other makers on the Discord Server: discord.gg/D58drZerT7
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
00:00 Introduction
02:23 Things You'll Need
03:08 3D Printing the Project
03:41 Creality Falcon 2
05:38 Cutting the Coaster
08:53 Assembling the Coasters
13:41 Cutting the Smart Storage Base
15:22 Assembling the Base
17:10 The Electronics
21:36 Engraving Glassware with Falcon
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Simply follow this detailed, step-by-step guide. This video is sponsored by PCBway. 👇 More info below 👇
In today's project, I'll show you how I made three different but effective large Neon LED wall signs. They have WiFi, Alexa and Philips Hue integration thanks to WLED running on the Wemos D1 Mini on the reverse.
This is alongside a discreet but easy to access set of physical controls for switching the sign on/off or adjusting the brightness without having to chat to your voice assistant or finding your phone.
List of items used in this project and where to find them:
■ 5v power supply : geni.us/5vPowerSupply5a (allow at least 2A per metre)
■ Neon effect LED strips: geni.us/NeonLEDStrip5v
■ ESP8266 Dev Board: geni.us/wemosD1
■ MOSFET Transistor (IRLB8721PBF) (x2) geni.us/IRLB8721PBF
■ Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ Barrel connector suitable for your amperage: geni.us/HighAmpDCBarrel
■ 50k Potentiometer: geni.us/Potentiometers
■ Slide toggle switch: geni.us/SlideSwitchSPDT
■ Power switch: geni.us/Power-Switch
■ Electrical hook-up wire: geni.us/22AWGWire
■ 3D Jakes filament: geni.us/3DJake
■ Projects PCB: pcbway.com/project/member/?bmbno=2883CCE7-0114-49
Electronics Kit on my international Etsy: diymachines.etsy.com/uk/listing/1661961591/large-neon-sign-with-alexa-hue
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
The WLED firmware can be downloaded from here:
install.wled.me
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/how-to-make-large-neon-led-signs
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
========
Discord server for this project:discord.gg/2W7bSq4ws6
The Discord community is a fantastic place to reach out for help or to help other makers.
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. 👇 More info below 👇
This Magic Mirror project has simplified my life whilst remaining hidden behind an inconspicuously simple mirror. In the morning the integrated motion sensor automatically turns on the information display and instantly shows me my calendar, local weather, news, and charge level of the family car.
Made from low cost builders yard pine wood and super strong Perspex Acrylic sheet (from Trent Plastic here in the UK), the mirror is easy to build. The monitor was bought from Gumtree and can be as little or as large as you like. The full length integrated touch lights also ensures the mirror is great for checking your outfit in before heading out for the day / night.
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
List of items used in this project and where to find them:
■ LED Aluminium channels: geni.us/LED-Channel-Flat
■ LED COB Lights: geni.us/COB-LED-24v-White
■ LED Dimmer control: geni.us/LED-Dimmer-Button
■ LED Power Supply: geni.us/24v-Power-Supply
■ Raspberry Pi: geni.us/RaspberryPiV4
■ PIR Sensor: geni.us/PIR-Sensor
■ Memory Card: geni.us/Micro-SD
■ Pi Power Supply: geni.us/PiPowerSupply
■ Acrylic: geni.us/AcrylicSheet
■ Two-way mirror film: geni.us/Two-Way-Mirror-Film
■ Monitor: geni.us/Monitor-Screen
■ Pocket hole jig: geni.us/PocketHoleJig
Download 3D printable parts and Fusion 360 files for free here: diymachines.co.uk/how-to-build-a-smart-magic-mirror
You can also find the software installation and configuration guide here also for free: diymachines.co.uk/how-to-build-a-smart-magic-mirror
Discord server for this project: discord.gg/dPy4ArAebn (A great place for questions and advice).
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: prusa3d.com/product/original-prusa-mk4-2/?p2p=%40DIYMachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk
My Etsy store:
etsy.com/uk/shop/DIYMachines
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Video is sponsored by Fezibo. 👇 More info below 👇
UK Store: bit.ly/44xaiN1
US Store: bit.ly/3NWIhHW
DE Store: bit.ly/3PXLCZP
Promo code: DIY Machines (Save £37 off)
(code is valid for all stores.)
I've been dreaming of building the ultimate work station for my design and 3D printing, so I took a sit/standing electric desk from Fezibo and upgraded it with modular storage, smart LED lighting and a iOS17 iPhone Standby Screen desk charger.
List of items used in this project and where to find them:
■ 24v WS2811 FCOB LED’s: geni.us/WS2811-FCOB
■ Aluminium LED diffusion channels: geni.us/LEDDiffusionChannel
■ 3D Printer Filament: 3djake.uk
■ Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ ESP8266 Dev Board: geni.us/wemosD1
■ 24v Power Supply (6 amp+): geni.us/12VPowerSupply6A
■ Some 20AWG wire (0.8128mm in diameter): geni.us/20AWG
■ 3M Command Hanging Strips: geni.us/CommandStrips
■ MagSafe Charger: geni.us/MagSafeWirelessCharger
■ 3D Printable iOS 17 MagSafe Stand: printables.com/model/531092-magsafe-desk-stand-for-ios17-standby
■ PCB from Geoleaf project which I used to connect the Microcontrollers and logic level shifters: etsy.com/uk/listing/1084096956
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa Mk4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
The WLED firmware can be downloaded from here:
install.wled.me
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/creating-the-ultimate-3d-printing-desk-station
My Etsy store:
http://diymachines.etsy.com
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
At its core is the main speaker - everything is contained in the main box including the Lithium Ion batteries, recharging circuit, bluetooth receiver and amp. You'll also find both a standard USB and USB C port to re-charge your other devices.
This is where it gets cool though: Assemble the second 'slave' speaker for a louder system and it’s connected as simply as sitting it on-top. Magnets hold it in place and the Pogo pins form the electrical connection!
Get a kit of parts from Etsy (and support the channel): etsy.com/uk/listing/1492616468
List of items used in this project and where to find them:
■ BMS 3S 60A: geni.us/BMC-3S-60A
■ CC/CV Buck Converter XL4015 (x1): geni.us/XL4015-CC-CV
■ Pogo Pins (2mm spring head & 5.5mm shaft length) (x2): geni.us/PogoPins75-55
■ 3 Cell 18650 Battery Holder (x1): geni.us/3s-18650-Holder
■ Quality 18650 Lithium Ion Batteries from a reputable source (x3)
■ Bluetooth Amp: geni.us/Bluetooth-AMP
■ Voltmeter / USB PSU (x1): geni.us/Voltmeter-with-USB
■ DC Barrel Connector (x1): geni.us/HighAmpDCBarrel
■ Power Switch (x1): geni.us/Power-Switch
■ 4” Full Range Speakers - They don’t have to be yellow! :) (x1 or 2): geni.us/4-Inch-Speakers
■ Power supply:
■ Magnets (12x3mm): geni.us/12x3mmMagnets
■ Bolts (M4x5mm): geni.us/M4-Bolts
■ Filament: 3djake.uk
■ PCB: pcbway.com/project/shareproject/3D_Printable_Modular_Bluetooth_Speaker_System_3df5b9d9.html
■ Disco Light (optional): geni.us/USB-Disco-Light
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/bluetooth-speaker-with-a-surprising-trick
Discord channel for this project: discord.gg/JZmuW73gN5
Designing your own PCBs with Fusion 360:
Part 1: youtube.com/watch?v=IqwHkB9lsUo&t=0s
Part 2: youtube.com/watch?v=VZZBEocoYDA&t=0s
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. 👇 More info below 👇
This upcycled lamp doesn't cost much for its size and impact thanks to the use low cost legs and empty filament spools for the bulk of the structure. 3D printing finishes of the remainder of the parts including the feet, base, top and shades. A custom PCB makes wiring a cinch and the use of common through-hole components mean no special soldering skills are required either.
It's driven by an ESP32 running the free WLED software to control the string of addressable 12v WS2811 LEDs. A integrated dial at the top of the lamp allows for dimming at the twist of the top, and a button hidden on the bottom also allows you to change the lighting pattern without needing to find your smartphone. Of course, this can all be controlled using a free app on your phone, Alexa, Hue or MQTT.
Kit of electronic parts: etsy.com/listing/1444900974
List of individual items used in this project and where to find them:
■ ESP32 Dev Board (x1): geni.us/ESP32
■ INMP44 Microphone (x1): geni.us/INMP441
■ WS2811 12v LEDs: geni.us/WS2811-60
■ DC to DC Buck converter (Mini 360 - x1): geni.us/Mini360
■ Potentiometer 5k (x1): geni.us/Potentiometers
■ 1k Resistor (x1): geni.us/Ufa2s
■ Tactile Button 12mm high (x1): geni.us/12mmTallTactile
■ Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ Barrel connector suitable for at least 5amps geni.us/HighAmpDCBarrel
■ Wooden Rods / Broom Handles: geni.us/WoodenBroomHandle
■ 3D Printer Filament: 3djake.uk
12v Power Supply (allow 0.7amps at least for every 10 LEDs):
■ (6 amp+): geni.us/12VPowerSupply6A
■ (2 amp): geni.us/12VPowerSupply2A
■ Projects PCB: pcbway.com/project/shareproject/Filament_Spool_Smart_Lamp_Hue_MQTT_Alexa_Sound_Reactivity_ESP32_Fusion_a26b7125.html
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
The WLED firmware can be downloaded from here:
install.wled.me
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk
Where I learnt to create PCBs in Fusion 360:
youtu.be/IqwHkB9lsUo
Discord server for this project: discord.gg/XveRaSxamG
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. 👇 More info below 👇
Today we’re customising your own desktop neon sign. This project is based on my previous video explaining the electronics circuit and assembly: youtu.be/5t02s6qDqtE
They can be powered by either a USB cable or 4 x 'AA' batteries giving you a lot of flexibility for placement. Why not use one to illuminate your next garden or beachside party?
The Free 3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/3d-printed-desktop-neon-signs
Download 'Neon Shape Starter' file as a STP model here: printables.com/model/332454-how-to-make-desktop-neon-signs-3d-printable-batter/files (scroll down th list of downloadable files)
There are several ready designed free Neon shapes (printables.com/model/332454-how-to-make-desktop-neon-signs-3d-printable-batter) you can choose from and I’ll be creating some more which are available on my Etsy shop:
diymachines.etsy.com
Purchase a kit of the electronics here (ships internationally): etsy.com/listing/1362555283
Every kit purchased helps support the channel and funds the next project. Thank you. 😊
-------------------------------------------
List of items used in this project and where to find them:
■ Neon effect LED strips: geni.us/NeonLEDStrip5v
■ Resistors 1kΩ (x2): geni.us/Ufa2s
■ Capacitors 0.1µF (x2): geni.us/Capacitor
■ Switching Diodes IN4148 (x2): geni.us/IN4148-Diode
■ Toggle Switch DPDT (x1): geni.us/DPDT-Toggle-Switch
■ Female USB Socket (x1): geni.us/MiniUSBSocket
■ 50k Rotary Potentiometer (x1): geni.us/Potentiometers
■ 555 timer IC (x1): geni.us/555Timer
■ MOSFET Transistor (IRLB8721PBF) (x1): geni.us/IRLB8721PBF
■ AA Battery PCB Mount (x4): geni.us/AABatteryPCBMount
■ Bolts (M3x8mm x6): geni.us/NutsAndBolts
■ Electrical hook-up wire: geni.us/22AWGWire
■ Filament: geni.us/3DJake (I used PLA)
■ Projects PCB: geni.us/DesktopNeonSigns
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/3d-printed-desktop-neon-signs
Etsy shop for 3D printable kits and more:
etsy.com/shop/diymachines
Discord server for this project: discord.gg/VjNdvW9RV6
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Main video here: youtu.be/XYqx5wg4oLU
This project has a relatively low cost and can produce some very detailed drawings. I've used it to create t-shirts, cake decorations, drawings to colour in myself (and some it coloured in for me!). You could also use it to draw out scale drawings, wedding invitations, birthday and Christmas cards and anything else you can think of. :)
A second video covering uploading the code, creating drawings, and sending them to your machine is available here: youtu.be/8scKLHz77Lg
3D printing files: prusaprinters.org/prints/94363-easy-3d-printable-cnc-drawing-machine-draw-on-cake#shorts
Full details and documentation can be found here: diymachines.co.uk/arduino-cnc-drawing-machine
How to build a dimmable and portable customisable Neon Sign. This video is sponsored by PCBway. 👇 More info below 👇
Today we’re making some of these awesome customisable desktop neon signs.
These ones can be powered by either a USB cable or 4 x 'AA' batteries giving you a lot of flexibility for placement. Why not use one to illuminate your next garden or beachside party?
They are also dimmable to help create the right level of ambience for any setting. Use it to help illuminate a room or dial it down for a more subtle addition to your decor.
As for customising? You can print the parts in any rigid filament colour, It’s your choice as well for the colour of Neon effect LED’s used.
The Free 3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/3d-printed-desktop-neon-signs
There are several ready designed free Neon shapes (printables.com/model/332454-how-to-make-desktop-neon-signs-3d-printable-batter) you can choose from and I’ll be creating some more which are available on my Etsy shop:
diymachines.etsy.com
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
And if you're comfortable you can edit the design and create something totally unique either for yourself or as a thoughtfully made gift to someone else.
-------------------------------------------
List of items used in this project and where to find them:
■ Neon effect LED strips: geni.us/NeonLEDStrip5v
■ Resistors 1kΩ (x2): geni.us/Ufa2s
■ Capacitors 0.1µF (x2): geni.us/Capacitor
■ Switching Diodes IN4148 (x2): geni.us/IN4148-Diode
■ Toggle Switch DPDT (x1): geni.us/DPDT-Toggle-Switch
■ Female USB Socket (x1): geni.us/MiniUSBSocket
■ 50k Rotary Potentiometer (x1): geni.us/Potentiometers
■ 555 timer IC (x1): geni.us/555Timer
■ MOSFET Transistor (IRLB8721PBF) (x1): geni.us/IRLB8721PBF
■ AA Battery PCB Mount (x4): geni.us/AABatteryPCBMount
■ Bolts (M3x8mm x6): geni.us/NutsAndBolts
■ Electrical hook-up wire: geni.us/22AWGWire
■ Filament: geni.us/3DJake (I used PLA)
■ Projects PCB: geni.us/DesktopNeonSigns
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/3d-printed-desktop-neon-signs
Etsy shop for 3D printable kits and more:
etsy.com/shop/diymachines
Discord server for this project: discord.gg/VjNdvW9RV6
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway. 👇 More info below 👇
Follow my detailed guide to build your very own indoor or outdoor garden railway and model train with working steam effect.
Built to an O gauge scale you can use your existing tracks or print new ones on your printer. The train itself is powered by a lithium ion battery pack (dead rail) and is controlled using wifi from your phone via the rain own onboard ad-hoc wifi network. This is all made possible thanks to the ESP32-CAM and some simple electronics.
PCBWay provide rapid turnaround of both PCBs and 3D printed components. Find out more about having them 3D print your train here: pcbway.com/rapid-prototyping
List of items used in this project and where to find them:
■ ESP32-Cam (inc. programming board) geni.us/ESP32-CAM
■ Common Geared Motor (x1): geni.us/TT-Motor
■ 3-way wago connectors (though the design can accommodate a 3 or 5 way if that’s what you have): (x2) geni.us/Wago221
■ Motor driver: HG7881/ L9110S (x1) geni.us/HG7881-Driver
■ 5mm LED (x1): geni.us/LEDs
■ 220 ohm resistor (x1): geni.us/Ufa2s
■ 2 magnets for each carriage (10x3mm):
■ 3mm brass rod : geni.us/3mm-Brass-Rod (30cm worth is enough)
■ Compact USB battery pack: geni.us/USB-Battery-Small
■ Rubber Gaskets for drive wheels 39mm ID x mm 3mm C/S (x4): geni.us/Gasket-39mmID-3mmCS
■ Bearings (3x6x2.5): geni.us/Bearing-3x6x2-5
■ Atomizer and Driver for the Steam effect (x1): geni.us/Atomiser
■ 3D printing filament - I used 3D Jakes PLA for the train and PETG for the tracks as mine will be outdoors all year round. geni.us/3DJake
■ Electrical wire - I’ll also be trimming down some Female jumper wires to make easy use of their connectors:
■ Wire: geni.us/22AWGWire
■ Jumpers: geni.us/JumperWires
■ Some bolts: geni.us/NutsAndBolts
M2 x 8 ( x2 )
M2.5 x 8 ( x2 )
M3 x 8 ( x22 )
M4 x 20 ( x4 )
■ Paint for decorating: geni.us/Vallejo-Steam
■ Grey primer: geni.us/Grey-primer
■ Gloss finishing coat: geni.us/Gloss-Protection-Spray
Additional models to improve your project: etsy.com/uk/shop/DIYMachines
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here: diymachines.co.uk/wifi-3d-printed-steam-train-with-live-view-camera
Projects Discord Channel: discord.gg/rtYGrSfJeP
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Visit eufy Clean: uk.eufylife.com/products/t2262211
Buy on Amazon: geni.us/eufyX8
■ UK X8: amzn.to/39zOR70
Use Code: eufyX8UK to save £90 at the checkout until June 26th 2022.
■ UK X8hybrid (includes mopping ability): amzn.to/3Hv5FbT
Use Code: eufyX8HUK to save £90 at the checkout until June 30th 2022.
■ US X8: amzn.to/39wZh7n
Use Code: eufyX8US to save $220.00 at the checkout until June 30th 2022.
■ US X8hybrid (includes mopping ability): amzn.to/3mXvjfK
Use Code: eufyX8HUS to save $250.00 at the checkout until June 30th 2022.
00:00 - Intro
01:11 - What's in the box?
01:44 - Hardware - Sensors
05:18 - Hardware - Suction
09:40 - Software
11:48 - Testing
16:05 - Final Thoughts
Thank you eufy Clean for providing the X8 for me to test and tear down. The 3D printable version I'm working on will be published soon - subscribe so you get a notification when it is published.
#eufyX8, #PetHairMagnet, #TwineTurbine, #DoubleDownOnPower #eufyClean
==========
SAY THANKS & SUPPORT DIY MACHINES:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This video is sponsored by PCBway.
Projects PCB from PCBWay: geni.us/Giant7SegPCB
Build a large and very bright seven segment display to show numbers, words, or animations for your own project. Example code and wiring diagrams are included for both the Arduino Nano and Wemos D1 Mini (ESP8266). Personalise it to your needs by including more hardware, such as thermometers, motion detection, buttons etc or use a Wemos D1 Mini to connect it to WiFi and show dynamic readings from the Web or your local network.
List of items used in this project and where to find them:
■ WS2812B LEDS 60/m (1 Meter required per digit): geni.us/5mWS2812B60m
A microcontroller, either
■ Elegoo Arduino Nano (x1): geni.us/ArduinoNanoV3
or
■ Wemos D1 Mini and LLC for Wifi and IoT Control (x1): geni.us/wemosD1
Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ Power supply 5v (x1): geni.us/5vPowerSupply3A (Budget at least 1.5amps per digit, 3.6 amps if your going to turn them all on bright white simultaneously).
■ Barrel Connector (x1): geni.us/HighAmpDCBarrel
■ Plenty of M3x6 bolts: geni.us/NutsAndBolts
■ 5mm Solid Acrylic: geni.us/SolidAcrylicSheets5mm
■ 3mm Semi-translucent/Frosted Acrylic: geni.us/OpalFrostedA4Acrylic
■ 3D Printer Filament: 3djake.uk
To connect the electronics either:
■ Projects PCB from PCBWay: geni.us/Giant7SegPCB
■ Wago style connectors or similar: geni.us/Wago221
Optional radio control add-on:
■ Radio Receiver: geni.us/315mhzReceiverMoment
■ Radio transmitter fob: geni.us/315mhzTransmitter-4b
Some wood for the frame. I used four pieces of pine 20x68x436mm (x2) and 20x68x381mm (x2)
To work out the wood lengths for different thickness of wood please take a look at the cheat sheet I made for you here: diymachines.co.uk/giant-modular-seven-segment-display
■ Glue (I used Wood glue and Gorilla Glue): geni.us/Gorilla-Glue
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ etc can be found here:
http://diymachines.co.uk/giant-modular-seven-segment-display
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Meet WeatherBot, my WiFi connected weather forecasting machine. WeatherBot retrieves a local forecast from OpenWeatherMaps and then shows you tomorrows weather with a motorised mini diorama. The additional e-ink display provides a more precise insight into today and tomorrows weather patterns. I’ll show you step by step how to make your own.
The Snapmaker 2.0 (3D Printer, Laser and CNC Router in one): bit.ly/3D8sTSp
Use coupon code: AF-0JT4 for additional savings on top of their current Christmas offers!
PCBWay: www.pcbway.com
List of items used in this project and where to find them:
■ Waveshare 2.9” E-ink Display (296x128): geni.us/E-inkDisplay1
■ Electrical wire: geni.us/22AWGWire
■ ESP32 (x1): geni.us/ESP32
■ Limit Switches (x4): geni.us/ContactSwitch
■ Micro continuous / 360 degree rotation servos (x4): geni.us/FS90R
■ PCB: geni.us/WeatherBotPCB
■ USB cable (for uploading code and powering project): geni.us/MicroUSBCable
■ M2.5x14 Bolts (x12), M2.5x8 Bolts (x7) and Nuts (x10): geni.us/M2-5BoltKit
■ 90 Degree / Corner Header Pins: geni.us/90DegreeHeaderPins
■ Filament for 3D printing: geni.us/3DJake
■ 3mm thick wood for laser cut scene discs (x4 A4 size): geni.us/3mmPlywood
■ Projects PCB: geni.us/WeatherBotPCB
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
3D printed parts, wiring diagrams, FAQ and code etc can be found here:
diymachines.co.uk/weatherbot-3d-printable-weather-forecasting-theatre
Etsy Shop:
etsy.com/uk/shop/DIYMachines
Discord server: discord.gg/vwb2VHrGVj
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
patreon.com/diymachines
Or join this channel on Youtube Memberships:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Get your PCB from PCBway here: geni.us/GeoLeafPCB
Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting panels. They can be arranged in any pattern to suit any space and thanks to the low cost of only around £3.40 a panel it won’t break the bank. They have built in Wifi control which is driven by the feature rich WLED firmware running on a Wemos D1 Mini.
I’ll show you step by step how to make your own.
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
List of items used in this project and where to find them:
■ 12v WS2811 LED’s (A 5 meter roll is enough for 12 panels): geni.us/WS2811-60
■ 10mm LED connectors - one per panel: geni.us/3Pin10mmLEDCable
■ 3D Printer Filament: geni.us/3DJake
■ Acrylic sheets (1 A4 sheet = 3 triangles. I used 3mm thick): geni.us/OpalFrostedA4Acrylic
■ DC to DC Buck converter (Mini 360): geni.us/Mini360
■ Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ ESP8266 Dev Board: geni.us/wemosD1
■ Plenty of M3x8 bolts: geni.us/NutsAndBolts
■ Barrel connector suitable for at least 5amps geni.us/HighAmpDCBarrel
■ 12v Power Supply (6 amp+): geni.us/12VPowerSupply6A
■ Dual T splice connectors (x2): geni.us/DualTSplice
■ 3D Printer Filament: geni.us/3DJake
■ Some 20AWG wire (0.8128mm in diameter): geni.us/20AWG
■ 3M Command Hanging Strips: geni.us/CommandStrips
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
■ Projects PCB: geni.us/GeoLeafPCB
Or optionally
■ PermaProto Board: geni.us/HalfPermaProto
■ Wago Connectors: geni.us/Wago221
If you're in the UK, Europe or USA you can order a pre-soldered PCB with the Wemos, Mini360 and Logic Converter already attached and configured here: etsy.com/uk/listing/1093166401
Optional Square panels to enhance your project: etsy.com/uk/listing/1067981962
==========
The WLED firmware can be downloaded from here:
install.wled.me
3D printed parts, wiring diagrams, FAQ etc can be found here:
diymachines.co.uk/geoleaf-3d-printable-nanoleaf-with-esp8266-alexa-hue
Download 3D printable parts: prusaprinters.org/prints/107555-geoleaf-3d-print-your-own-nanoleaf-project-alexa-h
Optional square panels available for a donation to the channel:
etsy.com/uk/listing/1067981962
Discord server for project: discord.gg/sbqyCmmYjc
==========
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
=============
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines
FACEBOOK: facebook.com/diymachines
ETSY: etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Search, collaborate, and share your 3D models with Thangs! Start exploring at: bit.ly/3h34OT0
Part 1: youtu.be/Lng_AsmfBfU
It is incredibly captivating to be beside this simple DIY wooden table as the steel ball magically carves out an endless and ever changing series of beautiful geometric patterns in the sand.
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
Links to the professional sand table - Ampersand:
■ Moving Pieces website: https://movingpieces.studio/
If you’re in the UK I highly recommend Oakdale Crafts as veneer supplier: oakdalecrafts.co.uk
I used their European Oak and applied some boiled linseed oil to bring out the grain detail. It looks fantastic.
List of items used in this project and where to find them:
■ 12v Nema 17 stepper motors (x2): geni.us/StepperMotor
■ GT2 Timing belt (3m was used in the video): geni.us/TimingBelt5m
■ 5mm bore idler, 6mm or 10mm width, 20 teeth (x2): geni.us/6mmIdler5mmBoreToothed
■ 5mm bore idler, 6 or 10mm width, toothless (x4): geni.us/6mmIdlerWheel5mmBore
■ Elegoo Arduino Uno (x1): geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): geni.us/NutsAndBolts
■ M2.5 x 6mm bolts (for securing Raspberry Pi) (x4) - geni.us/PiBolt
■ Stepper drivers - TMC2208 (x2): geni.us/TMC2208
■ Raspberry Pi (Zero W can cope but I recommend model 3 A+) geni.us/RaspberryPiAPlus
■ 10k potentiometers (x2) : geni.us/Potentiometers
■ Contact switch (x3): geni.us/ContactSwitch
■ Arduino CNC Shield (x1): geni.us/ArduinoCNCShield
■ Magnets, I used three x 15x3mm and one countersunk 20x7mm all high strength: geni.us/CountersunkMagnet geni.us/N52Magnets
■ 30mm 5V Fan (x1): geni.us/30mm5vFan
■ Micro SD Card 8Gb or higher for Raspberry Pi (x1) - geni.us/Micro-SD
■ Neopixels/WS2812b on a 30 per meter roll. - geni.us/5mWS2812B30m
■ 12mm momentary push button (x3): geni.us/MomentaryPush12mm
■ Some filament for the printed parts (I used PLA, including the wood infused LumberJake from 3D Jake) - 3djake.com
■ Wiring blocks - five wires (x2) and three wires (x2). I used the Wago 221 series - geni.us/Wago221
■ Mini360 Buck Converter (x1): geni.us/Mini360
■ Faux leather fabric (enough to cover the surface): geni.us/FauxLeather
■ Steel ball - 20mm:
■ Sand (I used around 600g):
To make a table frame which measures roughly 80 x 60cm:
■ 40cm long linear rail with block - MGN12H (x2): geni.us/LinearRail400mm
■ 60cm long linear rail with block - MGN12H (x1): geni.us/LinearRail600mm
See www.diymachine.co.uk for instructions on how to build a larger or smaller version.
■ Arduino Nano (x1): geni.us/ArduinoNanoV3
■ Electrical wire: geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): geni.us/FemalePowerBarrel
■ Pocket hole jig: geni.us/PocketHoleJig
Nuts, bolts and screws needed:
■ M5 x 20mm (x6)
■ M3 x 8mm (x18)
■ M3 x 12mm (x19)
■ M3 nuts (x6)
■ M2.5 bolts for Pi (x4)
■ Short wood screws (x45)
■ Optional pocket hole screws (x24)
These are some of my favorite tools I use and recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
DOWNLOADS:
3D printed parts, code, and wiring diagrams can be found and downloaded from here:
diymachines.co.uk/kinetic-sand-art-coffee-table-self-drawing
3D files on Thangs: bit.ly/3h34OT0
DISCORD SERVER:
discord.gg/JxM3jxFhv8
==========
SAY THANKS AND SUPPORT THE CHANNEL:
Provide continual and dependable support through Patreon:
Support me on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
■ Sony A7 III: geni.us/Sony-Alpha7-III
■ Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
■ Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
■ Aputure MC: geni.us/FAPGL
■ RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
■ Blue Snowball iCE: geni.us/BlueSnowball-iCE
■ Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Raspberry Pi is a trademark of the Raspberry Pi Foundation
It is incredibly captivating to be beside this simple DIY wooden table as the steel ball magically carves out an endless and ever changing series of beautiful geometric patterns in the sand.
Second video: youtu.be/GuPOcx9w6Vc
Links to the professional sand table - Ampersand:
■ Moving Pieces website: https://movingpieces.studio/
■ Moving Pieces YouTube: https://link.movingpieces.studio/youtube
■ Moving Pieces Instagram: instagram.com/movingpieces.studio
If you’re in the UK I highly recommend Oakdale Crafts as a supplier of veneer: oakdalecrafts.co.uk
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
List of items used in this project and where to find them:
■ 12v Nema 17 stepper motors (x2): geni.us/StepperMotor
■ GT2 Timing belt (3m was used in the video): geni.us/TimingBelt5m
■ 5mm bore idler, 6mm or 10mm width, 20 teeth (x2): geni.us/6mmIdler5mmBoreToothed
■ 5mm bore idler, 6 or 10mm width, toothless (x4): geni.us/6mmIdlerWheel5mmBore
■ Elegoo Arduino Uno (x1): geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): geni.us/NutsAndBolts
■ M2.5 x 6mm bolts (for securing Raspberry Pi) (x4) - geni.us/PiBolt
■ Stepper drivers - TMC2208 (x2): geni.us/TMC2208
■ Contact switch (x3): geni.us/ContactSwitch
■ Arduino CNC Shield (x1): geni.us/ArduinoCNCShield
■ Raspberry Pi (Zero W can cope but I recommend model 3 A+) geni.us/RaspberryPiAPlus
■ Magnets, I used three x 15x3mm and one countersunk 20x7mm all high strength: geni.us/CountersunkMagnet geni.us/N52Magnets
■ 30mm 5V Fan (x1): geni.us/30mm5vFan
■ Micro SD Card 8Gb or higher for Raspberry Pi (x1) - geni.us/Micro-SD
■ Neopixels/WS2812b on a 30 per meter roll. - geni.us/5mWS2812B30m
■ 12mm momentary push button (x3): geni.us/MomentaryPush12mm
■ Some filament for the printed parts (I used PLA, including the wood infused LumberJake from 3D Jake) - 3djake.com
■ Wiring blocks - five wires (x2) and three wires (x2). I used the Wago 221 series - geni.us/Wago221
■ 10k potentiometers (x2) : geni.us/Potentiometers
■ Mini360 Buck Converter (x1): geni.us/Mini360
■ Faux leather fabric (enough to cover the surface): geni.us/FauxLeather
■ Steel ball - 20mm:
■ Sand (I used around 600g):
■ 3D Printer Filament: geni.us/3DJake
To make a table frame measuring roughly 80 x 60cm:
■ 40cm long linear rail with block - MGN12H (x2): geni.us/LinearRail400mm
■ 60cm long linear rail with block - MGN12H (x1): geni.us/LinearRail600mm
See www.diymachine.co.uk for instructions on how to build a larger or smaller version.
■ Arduino Nano (x1): geni.us/ArduinoNanoV3
■ Electrical wire: geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): geni.us/FemalePowerBarrel
(As an Amazon Associate I earn from qualifying purchases.)
■ Pocket hole jig: geni.us/PocketHoleJig
Nuts, bolts and screws:
■ M5 x 20mm (x6)
■ M3 x 8mm (x18)
■ M3 x 12mm (x19)
■ M3 nuts (x6)
■ M2.5 bolts for Pi (x4)
■ Short wood screws (x45)
■ Optional pocket hole screws (x24)
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
DOWNLOADS:
3D printed parts, code, and wiring diagrams can be found and downloaded from here:
diymachines.co.uk/kinetic-sand-art-coffee-table-self-drawing
3D files on Thangs: bit.ly/3h34OT0
DISCORD SERVER:
discord.gg/JxM3jxFhv8
==========
SAY THANKS AND SUPPORT THE CHANNEL:
Provide continual and dependable support through Patreon:
Support me on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
■ Sony A7 III: geni.us/Sony-Alpha7-III
■ Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
■ Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
■ Aputure MC: geni.us/FAPGL
■ RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
■ Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Raspberry Pi is a trademark of the Raspberry Pi Foundation
Not only is this project low cost, but it's also very feature rich. It also:
■ Referees your game and warns you when you don't play by the rules
■ Provides a 'hint' if you want a suggested move whilst you learn
■ Built in backlighting provides feedback whilst looking amazing in low light
■ Power it from a simple low cost USB battery pack and play anywhere
■ Uses low cost common components
List of items used in this project and where to find them:
■ (x86) Neopixels/WS2812b on a 30 per meter roll. - geni.us/5mWS2812B30m
■ (x10) 6x6x5mm tactile momentary push buttons - geni.us/6x6TactileButton
■ (X1) Arduino Nano - geni.us/ArduinoNanoV3
■ (X1) Raspberry Pi (Zero W can cope but I recommend model 3 A+) - geni.us/RaspberryPiAPlus
■ (X1) Micro SD Card 8Gb or higher for Raspberry Pi - geni.us/Micro-SD
■ (X1) Logic level shifter - geni.us/TXS0108E-Shifter
■ (x2) Wiring blocks for at least 6 wires each. I used the Wago 243 series - geni.us/Wago-243
Some Wire - geni.us/22AWGWire
■ (x12) M3x6mm bolts - geni.us/NutsAndBolts
■ (x4) M2.5 x 6mm bolts (for securing Raspberry Pi) - geni.us/PiBolt
■ Some filament for the printed parts (I used PLA, including the wood infused lumberjack from 3D Jake) - 3djake.com
■ (x1) USB female DIP board - geni.us/FemaleMicroUSBDIP
■ (X1) 0.96 Inch OLED screen - geni.us/0-96OLED
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, 3D printable parts, wiring diagram and written software setup can all be found for free here: diymachines.co.uk/smart-chess-board-with-remote-and-local-play
Please consider supporting my projects by printing these chess pieces perfectly sized for the board: etsy.com/uk/listing/1081770177
Discord server for the project: discord.gg/BrtUK6KFNW
diymachines.co.uk
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
A logic level translator / converter / shifter is a great tool, and they're cheap enough to keep several to hand for when you need it next.
To follow along with the example project in the video you will need a few items, the links automatically redirect you to right item on your local Amazon site:
■ TXS0108E Logic Level Shifter: geni.us/TXS0108E-Shifter
■ Raspberry Pi: geni.us/RaspberryPiV4
■ Arduino Uno: geni.us/ArduinoUno
■ Jumper wires: geni.us/JumperWires
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, wiring diagram and software instructions can be downloaded from here: diymachines.co.uk/tsx0108e-logic-level-converter
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Drive it around and lay impressive domino runs using an app built with the free Blynk service via a bluetooth connection. It's my favourite way of playing with this machine (when I get the controls back from my family!)
This is the second video in this two part project series. The first video is available here: youtu.be/QsAplPLtriw
Using some basic electronics this machine can line up well spaced rows of wooden dominoes. You can drive it around corners, forwards and backwards - just don't drive into your already laid dominoes. You can enter a list of instructions to your robot via the Arduino IDE, upload with USB and then send it on it's way to follow your instructions, or you can open the phone app and drive it live via bluetooth.
List of items used in this project and where to find them:
■ Elegoo Arduino Uno (x1) - geni.us/ArduinoUno
■ Micro continuous rotation servo (x1) - geni.us/360MicroServo
■ Micro 180º servo (x1) - geni.us/MicroServo
■ LM317 DC-DC Converter (x1) - geni.us/LM317
■ Six AA Battery Holder (x1) - geni.us/6AABatteryHolder
■ AA Batteries (x6) - geni.us/AABatteries
■ 1:90 TT DC Motor (x1) - geni.us/1-90GearedTTMotor
■ L298N Motor Driver (x1) - geni.us/L298N
■ Limit Switch with roller arm (x2) - geni.us/ContactSwitch
■ 1602 LCD Shield with keypad (x1) - geni.us/1602LCDKeypad
■ HM10 Bluetooth Module (x1) - geni.us/HM10Bluetooth
■ M3 and M5 Bolts - geni.us/NutsAndBolts
M3x6 (x2) M3x10 (x21) M5x15 (x2) M5x20 (x2) M5x25 (x1)
■ Rubber Bands - geni.us/RubberBands
■ Dominoes the ones I used (x lots) - geni.us/Dominoes
■ 4 Way Wire Connector (x1) - geni.us/WagoConnectors
■ Electrical ‘Hookup’ wire - geni.us/22AWGWire
■ Filament for 3D printing:
- Silky silver from Geeetech: geni.us/GeeetechSilkSilverPLA
- White PLA: geni.us/GeeetechWhitePLA
■ Velcro Cable Tidy (for domino ejector) - geni.us/VelcroCableTidy
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code can be downloaded from here:
github.com/DIY-Machines/RC-Domino-Machine-V1
Guides for programming, FAQ, wiring diagram and helpful people available here:
diymachines.co.uk/rc-domino-laying-machine
3D printed parts can be downloaded from here:
thingiverse.com/thing:4694940
Support the channel with a one off donation and enjoy the not-yet-patented Rapid Domino Reloader Stick and some extra accessories to print for your dominoes: diy-machines.selz.com/item/rapid-domino-reloader-and-fun-accessories-to-print
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video was sponsored by PCBWay.
This video is shared for demonstration purposes only.
How to 3D print and assemble your very own programmable and remote controllable automatic domino laying machine.
Who likes knocking down absurdly long runs of dominoes? I do. Who doesn't like laying them all by hand. I don't. That's why I made this. 😊
Using some basic electronics this machine can line up well spaced rows of wooden dominoes. You can drive it around corners, forwards and backwards - just don't drive into your already laid dominoes. You can enter a list of instructions to your robot via the Arduino IDE, upload with USB and then send it on it's way to follow your instructions, or you can open the phone app and drive it live via bluetooth.
This is the first video in a two part project. The second video is available here and covers adding Bluetooth and app control from your phone: youtu.be/igvTsz2k3jE
List of items used in this project and where to find them:
■ Elegoo Arduino Uno (x1) - geni.us/ArduinoUno
■ Micro continuous rotation servo (x1) - geni.us/360MicroServo
■ Micro 180º servo (x1) - geni.us/MicroServo
■ LM317 DC-DC Converter (x1) - geni.us/LM317
■ Six AA Battery Holder (x1) - geni.us/6AABatteryHolder
■ AA Batteries (x6) - geni.us/AABatteries
■ 1:90 TT DC Motor (x1) - geni.us/1-90GearedTTMotor
■ L298N Motor Driver (x1) - geni.us/L298N
■ Limit Switch with roller arm (x2) - geni.us/ContactSwitch
■ 1602 LCD Shield with keypad (x1) - geni.us/1602LCDKeypad
■ HM10 Bluetooth Module (x1) - geni.us/HM10Bluetooth
■ M3 and M5 Bolts - geni.us/NutsAndBolts
M3x6 (x2) M3x10 (x21) M5x15 (x2) M5x20 (x2) M5x25 (x1)
■ Rubber Bands - geni.us/RubberBands
■ Dominoes the ones I used (x lots) - geni.us/Dominoes
■ 4 Way Wire Connector (x1) - geni.us/WagoConnectors
■ Electrical ‘Hookup’ wire - geni.us/22AWGWire
■ Filament for 3D printing:
- Silky silver from Geeetech: geni.us/GeeetechSilkSilverPLA
- White PLA: geni.us/GeeetechWhitePLA
■ Velcro Cable Tidy (for domino ejector) - geni.us/VelcroCableTidy
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code can be downloaded from here:
github.com/DIY-Machines/RC-Domino-Machine-V1
Guides for programming, FAQ, wiring diagram and helpful people available here:
diymachines.co.uk/rc-domino-laying-machine
3D printed parts can be downloaded from here:
thingiverse.com/thing:4694940
Support the channel with a one of donation and enjoy the not-yet-patented Rapid Domino Reloader Stick and some extra accessories to print for your dominoes: etsy.com/uk/listing/1077959216
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video was sponsored by Skillshare
This video is shared for demonstration purposes only.
Using a colour sensor and two servos, this cardboard colour sorter is a great educational build and a shortcut to finding the best Skittles (red ones obviously!)
Electromaker sell a kit which includes all the electronic components you'll need to assemble this project. Find it, the code, CAD files, and my full written guide over on their site: electromaker.io/kits/arduino-skittle-sorter-machine-guide
#####. The downloads are temporarily not working, for now you can find the code and printable templates here: drive.google.com/drive/folders/1rr-T1UBnACQGAZOu9dM6dTtT4fEOPN6n?usp=sharing. The rest of the guide, electronics, BOM etc are still available on Electromakers website. #####
You can also find some other kits I worked on with them at their online shop: electromaker.io/shop
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
==========
diymachines.co.uk
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
This project was kindly sponsored by PCBWay and AtmosFX. Take advantage of PCBWays 10 free pieces for new members at https://www.PCBWay.com
These three singing squashes are driven by a RaspberryPi and low-cost projector. Your guests pick either a song, scare or haunting tale using the 3D printed control panel and its illuminated arcade buttons. This is housed securely alongside a waterproof speaker and all stands at the end of your drive/garden. This keeps the mains electricity and your projector safely indoors.
==========
List of items used in this project and where to find them:
■ RaspberryPi: geni.us/RaspberryPiV4
■ 3.5mm jacks (x2): geni.us/3-5mmJacks
■ Suction Cups (x6): geni.us/SuctionCups
■ Illuminated Momentary Buttons (x3): geni.us/IllumMomentButtons
■ Wire: geni.us/22AWGWire
■ Resistors (220 Ohms) (x3) : geni.us/Ufa2s
■ Budget Projector: geni.us/BudgetProjector
■ Sony Budget friendly Waterproof Speaker (optional x1): geni.us/Sony-SRS-XB01
■ PLA Filament: geni.us/PLAFilament
■ M3 nuts and bolts: geni.us/NutsAndBolts
■ 10 core wire (length depends on your use): geni.us/10CoreWire
■ Wago Connectors (optional, two-way x6 and four-way x1): geni.us/WagoConnectors
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The software guide and downloadable sample animations can be found here: diymachines.co.uk/interactive-performing-pumpkins
AtmosFX have even more projections available on there site: www.atmosfx.com
3D printable parts can be downloaded here:
thingiverse.com/thing:4628211
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Part One for this project (which guides you through the 3D printing and assembly) can be found here: youtu.be/XYqx5wg4oLU
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
List of items used in this project and where to find them:
■ 8 x15 x 45mm Linear Bearing (x2): geni.us/LinearBearing45mm
■ 8 x 15 x 25mm Linear Bearing (x1): geni.us/LinearBearing25mm
■ 12v Nema 17 stepper motors (x2): geni.us/StepperMotor
■ GT2 Timing belt and pulleys: geni.us/TimingBelt5m
■ Micro servo (x1): geni.us/MicroServo
■ Elegoo Arduino Uno (x1): geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): geni.us/NutsAndBolts
■ Stepper drivers - TMC2208 (x2): geni.us/TMC2208
■ Contact switch (x2): geni.us/ContactSwitch
■ Arduino CNC Shield (x1): geni.us/ArduinoCNCShield
■ 30mm 5V Fan (x1): geni.us/30mm5vFan
■ 8mm Chromed Steel Rod (35cm x2 & 5.5cm x1): geni.us/8mmChromedSteelRod
■ 30cm long linear rail with block - MGN12H (x1): geni.us/LinearRail300mm
■ Electrical wire: geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): geni.us/FemalePowerBarrel
■ 6mm Idler Wheel - 3mm Bore (1): geni.us/6mmIdlerWheel3mmBore
■ Wooden panel to mount project at least 36x42cm (I used an Ikea ‘LÄMPLIG’ chopping board)
■ Sharpie Pens: geni.us/Sharpie
■ 3D Printer Filament: geni.us/3DJake
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Nuts, bolts and screws needed:
■ M5 x 25mm (x2)
■ M3 x 18 (x3)
■ M3 x 12 (x2)
■ M3 x10 (x3)
■ M3 x 6 (X14)
■ M3 nuts (x9)
■ M5 nut (x1)
■ Short wood screws (x8)
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, wiring diagrams, 3D printable parts etc can be downloaded for free from here:
diymachines.co.uk/arduino-cnc-drawing-machine
The drawings I created for use with my machine:
geni.us/EtsyCNCDrawingFiles
Inkscape 0.48.5 for Windows:
inkscape.org/release/inkscape-0.48/?latest=1
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
This project has a relatively low cost and can produce some very detailed drawings. I've used it to create t-shirts, cake decorations, drawings to colour in myself (and some it coloured in for me!). You could also use it to draw out scale drawings, wedding invitations, birthday and Christmas cards and anything else you can think of. :)
A second video covering uploading the code, creating drawings, and sending them to your machine is available here: youtu.be/8scKLHz77Lg
3D printing files: prusaprinters.org/prints/94363-easy-3d-printable-cnc-drawing-machine-draw-on-cake
List of items used in this project and where to find them:
■ 8 x15 x 45mm Linear Bearing (x2): geni.us/LinearBearing45mm
■ 8 x 15 x 25mm Linear Bearing (x1): geni.us/LinearBearing25mm
■ 12v Nema 17 stepper motors (x2): geni.us/StepperMotor
■ GT2 Timing belt and pulleys: geni.us/TimingBelt5m
■ Micro servo (x1): geni.us/MicroServo
■ Elegoo Arduino Uno (x1): geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): geni.us/NutsAndBolts
■ Stepper drivers - TMC2208 (x2): geni.us/TMC2208
■ Contact switch (x2): geni.us/ContactSwitch
■ Arduino CNC Shield (x1): geni.us/ArduinoCNCShield
■ 30mm 5V Fan (x1): geni.us/30mm5vFan
■ 8mm Chromed Steel Rod (35cm x2 & 5.5cm x1): geni.us/8mmChromedSteelRod
■ 30cm long linear rail with block - MGN12H (x1): geni.us/LinearRail300mm
■ Electrical wire: geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): geni.us/FemalePowerBarrel
■ 6mm Idler Wheel - 3mm Bore (1): geni.us/6mmIdlerWheel3mmBore
■ Wooden panel to mount project at least 36x42cm (I used an Ikea ‘LÄMPLIG’ chopping board)
■ Sharpie Pens: geni.us/Sharpie
■ 3D Printer Filament: geni.us/3DJake
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Nuts, bolts and screws needed:
■ M5 x 25mm (x2)
■ M3 x 18 (x3)
■ M3 x 12 (x2)
■ M3 x10 (x3)
■ M3 x 6 (X14)
■ M3 nuts (x9)
■ M5 nut (x1)
■ Short wood screws (x8)
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, wiring diagrams, 3D printable parts etc can be downloaded for free from here:
diymachines.co.uk/arduino-cnc-drawing-machine
prusaprinters.org/prints/94363-easy-3d-printable-cnc-drawing-machine-draw-on-cake
The drawings I created for use with my machine:
geni.us/EtsyCNCDrawingFiles
Inkscape 0.48.5 for Windows:
inkscape.org/release/inkscape-0.48/?latest=1
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
I'll explain how to crimp both male and female Dupont connectors (also known as Mini-PV) , what to look for in a good crimp and show you the tools.
You can buy a low-cost crimping kit from Amazon here: geni.us/DupontCrimper
Great value wire cutters as well if you need some: geni.us/Wire-Cutters
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
You can order a kit of the required electricals, screws, and lens from them on the project's page: electromaker.io/project/view/3d-printable-extendable-and-affordable-light-sabre
You'll also find a full set of written instructions, circuit diagram and the STL files to download and print for yourself on the projects page: electromaker.io/project/view/3d-printable-extendable-and-affordable-light-sabre
Electromaker's own YouTube channel: youtube.com/channel/UCiMO2NHYWNiVTzyGsPYn4DA
==========
SAY THANKS:
Please consider providing continual and dependable support through Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
As the lighting is LED (using WS2821B 'Neopixels') you can choose your own colours. A discreet photoresistor also dims the LED's when the ambient light levels drop - great for evening ambiance in any room.
List of items used in this project and where to find them:
■ An Arduino Nano(x1): geni.us/ArduinoNanoV3
■ A 5m roll of WS2812B LEDS which has 60 LED’s a meter: geni.us/5mWS2812B60m
■ A Photosensitive resistor module: geni.us/PhotoresistorModule
■ A DS3231: geni.us/DS3231-RTC
■ Some Hook up wire - ideally three different colours: geni.us/22AWGWire
■ A couple of 470 Ohm resistors: geni.us/Ufa2s
■ A couple of electric terminal block strips - each 5 blocks long: geni.us/TerminalBlocks
■ No 8 wood screws: geni.us/No8Screw
■ A 5v power supply with screw terminals: geni.us/PowerSupplyTerm
■ Some thicker twin core cable
■ Some filament for the 3D printed parts: geni.us/PLAFilament
■ Wood infused PLA filament: geni.us/WoodPLA
■ Wall unit rail: geni.us/WallUnitRail
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, 3D printed parts, wiring diagrams and more information can be found here:
diymachines.co.uk/how-to-build-a-giant-hidden-shelf-edge-clock
Drawing for CNC drilling of the backboard (if you have access to a CNC machine or know someone else who does):
etsy.com/uk/DIYMachines/listing/1081760909
DISCORD server for project help/advice: discord.gg/EhqqePPcKk
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
The guests just press the giant arcade button and the photo booth guides them through their own photoshoot sequence. :)
List of items used in this project and where to find them:
■ An Arduino Nano(x1): geni.us/ArduinoNanoV3
■ 2.2k and 1k resistor (x1 of each): geni.us/Ufa2s
■ Giant illuminated arcade button: geni.us/GiantArcadeButton
■ MAX7219 Display Matrix: geni.us/MAX7219DotMatrix
■ A shutter release cable for your SLR camera - I've built and tested this photo booth with a Canon camera.
■ Canon SLR - geni.us/CanonSLR
■ Canon EOS/Rebel SLR geni.us/CanonEOSSLR
■ Nikon SLR: geni.us/NikonSLR
■ Sony SLR: geni.us/SonySLR
■ Breadboard or some perforated board - I’ll show you how to connect everything together using either one.
■ Breadboard: geni.us/BreadboardMedium
■ Perfboard: geni.us/PCBPerfBoard
■ A screen or monitor (I’m using this 23” ASUS VC239H): geni.us/ASUSMonitor23
■ Some small lengths of hook up wire for the internal electronics: geni.us/22AWGWire
■ Four longer lengths of wire for connecting to the arcade button (I used two lengths of speaker wire): geni.us/SpeakerWire
■ Some filament for the 3D printed parts: geni.us/PLAFilament
■ And a digital SLR camera: geni.us/SLRCameras
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
For the housing
■ Some wooden panels Some screws Paint and other materials for decoration.
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code can be downloaded from here:
github.com/DIY-Machines/PhotoBooth
Find support, share your make, and help others on this project Discord channel:
discord.gg/buaYUbt9He
diymachines.co.uk
3D printed parts and wiring diagrams can be downloaded from here: thingiverse.com/thing:4017425
Arcade button mount can be bought here:
etsy.com/uk/listing/1091916515
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Chillistick.com kindly supplied the dry ice for this project. Use the voucher code 'DIY10' to get 10% off all their Halloween products for a limited time.
List of items used in this project and where to find them:
■ Elegoo Arduino Nano (x1): geni.us/ArduinoNanoV3
■ L298N Motor Driver (x1): geni.us/L298N
■ 8 AA Battery Holder (x1): geni.us/8aaBatteryHolder
■ AA Batteries (x8): geni.us/AABatteries
■ Mini breadboard (x1): geni.us/MiniBreadboard
■ 12v Geared DC Motor (x1): geni.us/12VGearedDCMotor
■ HM10 Bluetooth Module (x1): geni.us/HM10Bluetooth
■ Contact Switches (x2): geni.us/ContactSwitch
■ Stationery Holder (x1): geni.us/StationeryHolder
■ Nuts and Bolts - : http://geni.us/NutsAndBolts
■ Wire: geni.us/22AWGWire
■ PLA Filament: geni.us/PLAFilament
■ Plastic Container (x1): geni.us/PlasticContainer
These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code and wiring diagram can be downloaded from here: diymachines.co.uk/make-the-ultimate-bluetooth-dry-ice-fog-machine
3D printed parts can be downloaded from here: thingiverse.com/thing:3902329
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: patreon.com/diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
List of items used in this project and where to find them:
■ Elegoo Arduino Nano (x1): geni.us/ArduinoNanoV3
■ Servo (x1): geni.us/Servo
■ Real-time clock (x1): geni.us/DS3231-RTC
■ Hoselock compatible connector (x2): geni.us/hose-connectors
■ Wire: geni.us/22AWGWire
■ Hoselock compatible inline valve (x1): geni.us/hozelock-valve
■ Nuts and Bolts - M3 x 10 (x3): http://geni.us/NutsAndBolts
■ ABS Filament: geni.us/ABS-Filament
■ Long USB cable (x1) geni.us/LomgUSBMiniB
■ USB wall plug (x1) geni.us/USBWallPlug
■ Hoselock Irrigation kit (x1): geni.us/Hozelock-Irrigation
If you would prefer to use PLA filament I have good success with this one:
■ PLA Filament: geni.us/PLAFilament
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code and wiring diagram can be downloaded from here: diymachines.co.uk/projects/automatic-arduino-based-garden-waterer.html
3D printed parts can be downloaded from here: thingiverse.com/thing:3875075
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Not sure, then why not make one and find out. (My current best is level 16).
With an Arduino Nano at its core, this project also incorporates an OLED screen, passive buzzer, and some big bright buttons.
==========
List of items used in this project and where to find them :
■ Elegoo Arduino Nano (x1): geni.us/ArduinoNanoV3
■ OLED Screen (1): geni.us/OLEDscreen
■ Battery Holders (x2): geni.us/2aaBatteryHolder
■ Resistors (220 Ohms) (x4) : geni.us/Ufa2s
■ Wire: geni.us/22AWGWire
■ AA Batteries (x4): geni.us/AABatteries
■ Illuminated Momentary Buttons (x4): geni.us/IllumMomentButtons
■ Nuts and Bolts - M3 x 10 (x4): http://geni.us/NutsAndBolts
■ 5v buzzer (x1) : geni.us/5vBuzzer
■ PLA Filament: geni.us/PLAFilament
■ Illuminated Power Switch (x1): geni.us/IllumPowerSwitch
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6
==========
The code and wiring diagram can be downloaded from here: http://www.diymachines.co.uk/diy-arduino-simon-says-game
3D printed parts can be downloaded from here: thingiverse.com/thing:3723181
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
With an Arduino Nano at its core this project uses a water level sensor to let you know when to refill the concealed tank and a solid moisture sensor to figure out when to water your plant based on its needs.
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
==========
CORRECTION: 4:05 into the video I incorrectly say to use 20cm wires to connect the water level sensor. The correct length is 35cm.
List of items used in this project and where to find them:
■ Arduino Nano: geni.us/ArduinoNanoV3
■ Mini submersible pump: geni.us/MiniPump
■ 5mm tubing: geni.us/5mmTubing
■ Transistor: geni.us/2npn2222
■ Resistors (1k and 4.7k): geni.us/Ufa2s
■ Wire: geni.us/22AWGWire
■ 3mm LED: geni.us/LEDs
■ Water level sensor: geni.us/WaterLevelSensor
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Soil moisture sensor: geni.us/MoistureSensor
■ Half Perma-proto board: geni.us/HalfPermaProto
■ PLA Filament: geni.us/3DJake
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
==========
The code can be downloaded from here: github.com/DIY-Machines/SmartPlantV1
3D printed parts and wiring diagram can be downloaded from here: thingiverse.com/thing:3537287
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
It's built around a low-cost Wemos D1 microcontroller and a dot matrix display module. With built-in WiFi it only requires a USB connection for power once complete. The total build cost is around £15 / $18.
==========
List of items used in this project and where to find them:
■ Wemos D1: geni.us/wemosD1
■ MAX7219 Display Matrix: geni.us/MAX7219DotMatrix
■ Mini Breadboard: http://geni.us/MiniBreadboard
■ Breadboard Jumper Cables: http://geni.us/JumperWires
■ USB A to USB Micro B Cable: http://geni.us/USBAtoUSBB
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
==========
The code can be downloaded from here: github.com/DIY-Machines/YoutubeSubcriberV1
3D printed parts and wiring diagram can be downloaded from here: thingiverse.com/thing:3444779
The 3D printable light shield can be download here: etsy.com/uk/listing/1077980540
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
==========================
List of items used in this project and where to find them:
■ TCRT5000 break out board: http://geni.us/TCRT5000
■ Arduino Uno: http://geni.us/ArduinoUno
■ Jumper Wires: http://geni.us/JumperWires
■ Breadboard: http://geni.us/MiniBreadboard
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
==========
The code can be downloaded from here: github.com/DIY-Machines/TCRT5000
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
It's based on an ESP8266 Adafruit Feather Huzzah, which connects to Alexa using its onboard wifi chip. If you're into home automation its an ideal addition to your gadgetry.
Support future projects, see DIY Machines' Amazon Wish List: amazon.co.uk/hz/wishlist/ls/QK5P8DGKNYAR?ref_=wl_share
==========
List of items used in this project and where to find them:
■ Stepper Motor: http://geni.us/StepperMotor2
■ A4988 Stepper Motor Driver: http://geni.us/a4988
■ Adafruit Feather Huzzah ESP8266: http://geni.us/FeatherHuzzah
■ Mini Breadboard: http://geni.us/MiniBreadboard
■ Breadboard Jumper Cables: http://geni.us/JumperWires
■ Braided fishing wire: http://geni.us/BraidedFishingWire
■ USB A to USB Micro B Cable: http://geni.us/USBAtoUSBB
■ Capacitor: http://geni.us/Capacitor
■ Switched Battery Holder: http://geni.us/8aaBatteryHolder
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ 3D Printer Filament: geni.us/3DJake
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines
Prusa support my channel when you use that link at no cost to yourself. :)
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
==========
The code can be downloaded from here: github.com/DIY-Machines/alexa-cutrain-control
3D printed parts can be downloaded from here: thingiverse.com/thing:3174263
Discord server for this project: discord.gg/xrZpGAUdec
==========
SAY THANKS:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
👇 More info below 👇
It also features a replaceable and customisable clock face so you can add your own design flair to your project.
It can be printed and assembled over a weekend.
==========
List of items used in this project and where to find them:
■ Arduino Uno: http://geni.us/ArduinoUno
■ Adafruit Neomatrix: http://geni.us/AdafruitNeomatrix
■ Coloured wires: http://amzn.to/2IDIU6D
■ DS3231 Real Time Clock: geni.us/DS3231-RTC
■ Resistors: http://amzn.to/2HTmLA2
■ PLA Filament: geni.us/PLAFilament
==========
Download 3D printable parts:
■ thingiverse.com/thing:3028623
==========
Code is available here:
■ electromaker.io/project/view/word-clock-customisable-and-easy-to-build
==========
Circuit diagrams:
■ thingiverse.com/thing:3028623
==========
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
SUPPORT:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
You can either try to improve your personal best or challenge a friend to do better than you (if you trust them with your drone that is).
It can be printed and assembled over a weekend.
SUPPORT DIY MACHINES:
Buy me a coffee to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==========
List of items used in this project and where to find them:
■ Arduino Uno:http://amzn.to/2prkQvJ
■ 7 Segment Display: http://amzn.to/2HRAzuR
■ Battery holder: http://amzn.to/2pwiWJJ
■ Neodymium Magnets 3 x 6mm: amzn.to/2GoyaKV
■ Coloured wires: http://amzn.to/2IDIU6D
■ Ultrasonic sensor: http://amzn.to/2pt4xOm
■ Rechargeable batteries: http://amzn.to/2ptrSQ1
or
■ Standard AAs: http://amzn.to/2GNj8wg
■ Red and Green LEDs: http://amzn.to/2puX7Kw
■ Resistors: http://amzn.to/2HTmLA2
==========
Download 3D printable parts:
■ thingiverse.com/thing:2832044
==========
Code is available here:
■ electromaker.io/project/view/drone-landing-pad-with-arduino-timer
==========
Circuit diagrams:
■ thingiverse.com/thing:2832044
==========
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
STAND AND TEMPLATE
You can support the channel by purchasing a combined template and stand for your BB8 here: geni.us/EtsyBB8Stand
You can also 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
Part three, this video, covers how to decorate the robot.
Part one in our series covered the majority of the electrical assembly, and the creation of his main body. You can watch part one here: youtu.be/qFbfLk-jUd4
Part two covers the assembly of the head: youtu.be/o28ejTRMKo0
List of items used in this project and where to find them:
■ Stand and decal template: diy-machines.selz.com/item/5a4a4d6fca4c9d066c586cfc
■ Styrofoam Ball: http://amzn.to/2Drccpn
■ Arduino Uno:http://amzn.to/2xbXNK4
■ Motor shield: http://amzn.to/2gQUkL0
■ HM10 Bluetooth model: http://amzn.to/2kW8BYs
■ Motor and wheel: http://amzn.to/2mQGYxl
■ Magnets: http://amzn.to/2D6kZte
■ Battery: http://amzn.to/2my0df4
■ Battery Holder (eBay): tinyurl.com/y9hwbhf2
■ Hycote White Primer: http://amzn.to/2FA0mGS
■ Metallic Sharpies: http://amzn.to/2GFXJoo
■ Set of Sharpies: http://amzn.to/2EvauRO
Hot Wire cutter:
■ thingiverse.com/thing:2718709
Download 3D printable parts:
■ thingiverse.com/thing:2749613
========
Code is available here:
=======
diymachines.co.uk/star-wars-bb8-remote-control-printed-robot
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
BB8 is a Disney Star Wars created character. I make no claim to it's design, merchandise or anything like that. This is fan art for the community.
Part two covers how to assemble the head of the robot.
Part one in our series covered the majority of the electrical assembly, and the creation of his main body. You can watch part one here: youtu.be/qFbfLk-jUd4
==================================
SUPPORT US:
You can also 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
List of items used in this project and where to find them:
Styrofoam Ball: http://amzn.to/2Drccpn
Arduino Uno:http://amzn.to/2xbXNK4
Motor shield: http://amzn.to/2gQUkL0
HM10 Bluetooth model: http://amzn.to/2kW8BYs
Motor and wheel: http://amzn.to/2mQGYxl
Magnets: amzn.to/2GoyaKV
Battery: http://amzn.to/2my0df4
Battery Holder (eBay): tinyurl.com/y9hwbhf2
Hycote White Primer: http://amzn.to/2FA0mGS
Metallic Sharpies: http://amzn.to/2GFXJoo
Set of Sharpies: http://amzn.to/2EvauRO
Hot Wire cutter: thingiverse.com/thing:2718709
Download 3D printable parts:
thingiverse.com/thing:2749613
Optional Stand and drawing template:
geni.us/EtsyBB8Stand
========
Code is available here:
=======
diymachines.co.uk/star-wars-bb8-remote-control-printed-robot
SUBSCRIBE:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
BB8 is a Disney Star Wars created character. I make no claim to it's design, merchandise or anything like that. This is fan art for the community.
Part one in our series covers the majority of the electrical assembly and the creation of his main body.
==================================
SUPPORT US:
You can 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
List of items used in this project and where to find them :
■ Styrofoam Ball: http://geni.us/StyrofoamBall120m
■ Arduino Uno: http://geni.us/ArduinoUno
■ Motor driver: http://geni.us/UnoMotorShield
■ HM10 Bluetooth model: http://geni.us/HM10Bluetooth
■ Motor and wheel: http://geni.us/6VMotorAndWheel
■ Magnets: http://geni.us/6x3mmMagnets
■ Battery: http://geni.us/CR2032
■ Battery Holder (eBay): tinyurl.com/y9hwbhf2
■ Hycote White Primer: http://amzn.to/2FA0mGS
■ Metallic Sharpies: http://amzn.to/2GFXJoo
■ Set of Sharpies: http://amzn.to/2EvauRO
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Hot Wirecutter:
■ thingiverse.com/thing:2718709
Download 3D printable parts:
■ thingiverse.com/thing:2749613
Optional Stand and drawing template:
■ geni.us/EtsyBB8Stand
========
Code is available here:
=======
diymachines.co.uk/star-wars-bb8-remote-control-printed-robot
SUBSCRIBE:
■ youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
BB8 is a Disney Star Wars created character. I make no claim to its design, merchandise or anything like that. This is fan art for the community.
==================================
SUPPORT US:
You can 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
You'll need the following:
- Some wire
- A set of the 3D printable parts thingiverse.com/thing:2718709
- 1 momentary switch http://amzn.to/2ADQxFM
- 3 AA Batteries http://amzn.to/2ohIBrS
- 3 Bolts http://amzn.to/2on1RED
- 4 Nuts http://amzn.to/2on1RED
- Some 32 AWG Nichrome http://amzn.to/2ACssiE
and that's it!
The 3D printed parts can be downloaded from Thingiverse: thingiverse.com/thing:2718709
The battery holder itself was designed by 'enif': thingiverse.com/thing:456900
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.
Part four in our series explains how to order a drink on your phone using Bluetooth BLE.
==================================
SUPPORT US:
You can 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
List of items used in this project and where to find them:
Measured optics: http://geni.us/baroptics
Free-flowing optic (for mixers): http://amzn.to/2faZUnl
HM10 Bluetooth module: http://geni.us/HM10Bluetooth
RGB LED: geni.us/RGBLEDCC
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
First drink CSV:
07,30,01,68,90,01,72,10,00,70,00,00,74,01,00,71,01,00,
Find main Arduino code here: diymachines.co.uk/3d-printed-low-cost-robotic-bartender
Download 3D printable parts:
thingiverse.com/thing:2478890
SUBSCRIBE:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
Disclaimer:
This video is shared for demonstration purposes only.
Part three in our series covers the assembly of the backboard and optics.
==================================
SUPPORT US:
You can 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
List of items used in this project and where to find them:
Arduino Uno: http://geni.us/ArduinoUno
Motor driver: http://geni.us/UnoMotorShield
Contact Switch: http://geni.us/ContactSwitch
Linear Bearings: http://geni.us/LinearBearings
Stepper Motor: http://geni.us/StepperMotor
RGB LED: geni.us/RGBLEDCC
Timing Belt and Pulley (2m version): http://geni.us/TimingBelt
Timing Belt and Pulley (5m version): http://geni.us/TimingBelt5m
8mm Steel Rod: geni.us/8mmMetalRod
Measured optics: http://geni.us/baroptics
Shelf brackets: http://geni.us/shelfbrackets
Free-flowing optic (for mixers): http://amzn.to/2faZUnl
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Download 3D printable parts:
thingiverse.com/thing:2478890
diymachines.co.uk/3d-printed-low-cost-robotic-bartender
SUBSCRIBE:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
Disclaimer:
This video is shared for demonstration purposes only.
Part two in our series covers the majority of the electrical assembly.
==================================
SUPPORT US:
You can 'buy me a coffee' to say thanks: ko-fi.com/diymachines
Support us on Patreon: patreon.com/diymachines
==================================
List of items used in this project and where to find them:
Arduino Uno: http://geni.us/ArduinoUno
Motor driver: http://geni.us/UnoMotorShield
Contact Switch: http://geni.us/ContactSwitch
RGB LED: geni.us/RGBLEDCC
Linear Bearings: http://geni.us/LinearBearings
Stepper Motor: http://geni.us/StepperMotor
8mm Steel Rod: geni.us/8mmMetalRod
Timing Belt and Pulley (2m version): http://geni.us/TimingBelt
Timing Belt and Pulley (5m version): http://geni.us/TimingBelt5m
Measured optics: http://geni.us/baroptics
Shelf brackets: http://geni.us/shelfbrackets
Free-flowing optic (for mixers): http://amzn.to/2faZUnl
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Download 3D printable parts:
thingiverse.com/thing:2478890
Circuit diagrams and code are available here: diymachines.co.uk/projects/how-to-build-an-arduino-diy-robotic-bartender.html
SUBSCRIBE:
youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
DISCORD server: discord.gg/EhqqePPcKk
INSTAGRAM: instagram.com/diy_machines/?hl=en
FACEBOOK: facebook.com/diymachines/?ref=aymt_homepage_panel
PATREON: patreon.com/diymachines
Disclaimer:
This video is shared for demonstration purposes only.


