Chris Ballwhile i do already have a Super UFO Pro 8 for playing back ups (not exactly the best, get a Super Everdrive!) i thought i would give my old Super Wild Card some new life. my father bought the SWC for me as a pre-graduation gift a few months before i graduated high school in '94, that's why i can't simply let this thing fade into the background and collect dust. a while back i came across this floppy drive emulator i saw a guy using on his keyboard synth and i thought that it would be perfect for the SWC. so i finally got it in from China and got it working, check it out!
Super Wild Card Floppy Drive Emulator UpgradeChris Ball2012-11-03 | while i do already have a Super UFO Pro 8 for playing back ups (not exactly the best, get a Super Everdrive!) i thought i would give my old Super Wild Card some new life. my father bought the SWC for me as a pre-graduation gift a few months before i graduated high school in '94, that's why i can't simply let this thing fade into the background and collect dust. a while back i came across this floppy drive emulator i saw a guy using on his keyboard synth and i thought that it would be perfect for the SWC. so i finally got it in from China and got it working, check it out!1967 Mustang startupChris Ball2023-06-26 | ...1967 MustangChris Ball2023-06-26 | ...Civic Video DarknessChris Ball2019-08-18 | Selling my Civic. this is a video just going over the carRGB Modded 32 APEX TV DEMOChris Ball2018-10-14 | not a how to or anything, just a quick little video to show the screen quality of the tv.SONY KV-27FV310 RGB Mod ProblemChris Ball2018-09-09 | i modded this set and everything went pretty smoothly. the screen looks awesome and the levels are great, but there is some strange interference or something going on here. anyone with some ideas? i would love to get this one finished up since this is the set i was planning on using for my own gaming set up. thanks in advance.
my set up is the following: input- raspberry pi running at 240p via 666 hat
15 pin DB-15 VGA cable going between the two with a panel mount jack on the TV set.
RGB injection through the jumpers going between the OSD chip and the JUNGLE chip.
75ohm resistors to ground on each line.
sync tapped from composite video on the board H & V sync combined to one.
5v from board to BLANKING pin on the JUNGLE chip.First Night in Tokyo (Shinjuku)Chris Ball2017-05-23 | just more randomness, nothing too exciting. this will be the theme of most of my videos; they are more of a way to share with friends and family than youtube entertainment. we pretty much just got there and were hungry so... sorry about the crappy camera work.
if you like the song you can learn more about it here:-----v
♫ MDK - Eclipse (Extended Mix) http://youtube.com/watch?v=rLXZxdX-NCA http://facebook.com/mdkofficial http://youtube.com/mdkofficialytPC Engine LoveChris Ball2017-05-10 | just a random video i made a long while back, i was about to delete it off my computer so i thought i would throw it up here before its gone.arcade updateChris Ball2016-12-12 | ...NeoGeo X Raspberry Pi WiringChris Ball2016-07-25 | this is a brief look at the inside of the NEO GEO X that i modified to work with a Raspberry Pi. check it out and if you have questions feel free to ask. doing this video has made me want to re-visit this mod and possibly re-do it nicer and cleaner. time will tell if i get around to it though.3D Printing Transformers PrologueChris Ball2016-04-18 | ...1:1 Arcade CRT Resolution with MAMEChris Ball2015-07-20 | this is a project that i am currently messing with. i had an old PC laying around and it just happened to have one of the video cards that the crt emudrivers work with. what this means is, i can now display resolutions compatible with arcade monitors for perfect pixel for pixel emulation using mame and a few other emulators!NeoGeoX Raspberry Pi UpdateChris Ball2014-08-12 | dug out my NeoGeo Pi again and made some refinements to it, some for the better some for the worse. the issues i am having with the frame skipping; i don't recall them being there on the previous build. i could be mistaken, but i think i would have remembered something like that. none the less, here it is.Mini Mame Cabinets- Behind the Scenes Slideshow (kinda boring, but lots of photos)Chris Ball2014-07-25 | i thought i would post this because maybe someone might find it interesting and it just might help someone thinking about making a cabinet for themselves. it drags on for quite a while but i think it covers some of the key points of making these. so pop a Monster drink and get ready for close to a half hour of boring arcade cabinet ... uh goodness?My Latest Build- Mini Mame Cabinet TourChris Ball2014-07-22 | this video is more to give people a better understanding of how i build my cabinets and maybe give people an idea how to possibly go about building one of their own! as always; any questions, feel free to ask.Original XBOX Controller to PC Hack.Chris Ball2014-07-22 | I threw this little video together to show how to hack the cord for the original XBOX so that you can use it on your PC running Windows XP. the reason I uploaded this was to show the control interface i use when i make an arcade cabinet designed for emulators.Super Famicom Hydrogen Peroxide De-Yellowing UpdateChris Ball2014-07-12 | almost two years later and still looking pretty good. the yellowing has come back a little, but not too bad. i will probably throw it in some hydrogen peroxide again for a few hours and show you how it goes.NEO GEO X meets Raspberry PiChris Ball2014-02-12 | this is a little video showing how i made my Neo Geo X base station into a more useful Neo Geo based machine by using a Raspberry Pi in place of the actual Neo Geo X hand held.NEO GEO X PI INTROChris Ball2014-02-07 | this is a teaser of a video review i will be making about using the NEO GEO X base station as a case for a Raspberry Pi fully utilizing its ports.Transformers Collection + VoltronChris Ball2013-10-15 | i thought i would throw this on my channel since a lot of people that like retro games like Transformers too. these are pretty much all the Transformers and robots i own. my collection used to be out of control and i had some amazingly rare items, but we all grow up and some things become less important than the amount of money they can be worth...Pick Ups and ProjectChris Ball2013-10-15 | um um um... man! i need to star scripting these videos, i said um about a hundred time in this one.Super Famicom RGB ModChris Ball2013-07-07 | this is my RGB mod to my Super Famicom. i think there has to be a better way to do this but this is what's getting me by. if anyone has done a mod like this with better results please let me know what to do. its not bad, but its just not right. thanks for watching.Consolized Neo Geo MVS- MV-1BChris Ball2013-07-07 | this was a fun project and not too difficult. if you can solder and have some patients following directions then you can do this too.Pick Ups and Getting Caught UpChris Ball2013-07-07 | i have been pretty busy with work and some projects lately, just getting things up to speed here.Rom Splitting for Super Wild Card- Super Magicom- Super UFO Etc.Chris Ball2013-04-02 | this is a basic overview of what program to download and how to use it in order to split roms to use on an older 3.5" floppy based back up device from the 90's. i may or may not follow it up with the info on the Gotek floppy emulator walk through. if you would like to see me demo how to set up the floppy emulator, please comment about it that you would like to see it and i will cover it.NeoGeo X Short Compare and ReviewChris Ball2012-12-26 | this is a sort of over-view review. it notes some things i found while playing with the Neo Geo X system. i made minor references to the original Neo Geo AES system and gave my thoughts on how Tommo should go about game releases. this was initially going to be a more in depth review and comparison, but after the release of this, it seems everybody and their dog has made a review on the system, so rather than cover what has already been done, i gave it my own spin. i love the system, it has its draw backs, but might be eventually fixed through the hacking community.Convert a Turbografx 16 controller to use on a PC EngineChris Ball2012-11-26 | pretty basic, but if you have questions let me know and i can help you.Yet Another PC Engine AV Mod...Chris Ball2012-11-23 | i am sure you guys are sick of seeing my re-hashes of the PC Engine AV Mod, but this one should appeal to just about anyone since the two items needed to do it are easy to deal with and purchase from a Radio Shack or whatever. this one is my favorite so far because it is very small and doesn't require you to de-solder the RF Modulator. KEEP IN MIND!!!- if you do this one, you might not be able to dock the PC Engine with a CD Interface Unit... Maybe, i don't have one so i don't know if there is room for this between the unit and the console. for a little bit more info on soldering the correct audio and video points check out my previous PC Engine vids or if you wanna do this to a Turbografx 16 check out my Turbo vid and just adapt it over, there is a lot more room on a TG16.Get Your Game Carts CleanChris Ball2012-11-07 | this is just a nothing special "how i clean carts" video. i was going to be doing this anyway, so i figured i would make a little video, then i got side tracked by my little mod. but, this is an easy way to clean your carts of any kind as long as you can open them up.Custom Neo Geo Candy Style Home Made Arcade pt2Chris Ball2012-11-04 | here you can hear me ramble on bout this machine and demo it out for you.Custom Neo Geo Candy Style Home Made Arcade pt1Chris Ball2012-11-04 | i think this was the third arcade machine i built. this one was BIG, too big for me to keep. it had a 27" crt television as the monitor and even for how big it was, for some stupid reason i only made it a single player machine, whatever, its a learning experience.Mini Mame Arcade MachineChris Ball2012-11-04 | this is probably the fourth or fifth arcade machine i have built, this one is really nice, although i am not too fond of painted sides, at least rolled on latex paint. this one was pretty easy since i didn't do anything too fancy anywhere, i just made it work and it worked great.Mini Mame Cabinet - Samurai Shodown StyleChris Ball2012-11-04 | this in one of many mini mame arcade machines i have made, but i think this is one of my favorites. i went with a art design from Samurai Shodown; not too over the top, but enough to look cool and not make people think it is a SS only machine. this was totally built from scratch; wood from Home Depot etc. this was a lot of fun to build, it has a Harmon Kardon sound system in it with a sub woofer, it sounded very clear with nice clean bass. and the monitor is a Dell Ultrasharp 19" display and looked very nice. the whole thing took me about a week to build on my vacation.PC Engine AV Mod DemoChris Ball2012-10-22 | i recomend watching this video and my other video for all the info on doing this mod. its fairly easy to do if you have soldering experience. if you are unsure of your skills, find someone who you feel can do it. its a great mod and very cheap.Famicom De Yellowing VideoChris Ball2012-10-21 | This was a pretty good improvement, while it could have been better, I didn't want to damage the "family computer" sticker on the front since it started to fade a little. But in all, I think it was a good improvement for a few dollars worth of materials.Famicom Console Lables.Chris Ball2012-10-19 | link to the PDF file: jumpshare.com/v/McO8VdkoJzemCFMJDLIA?b=x3LLquREwGIn8OdTroK0 link to the Corel Draw File: jumpshare.com/v/wGUL8VhgW6K5kPfLcprG?b=x3LLquREwGIn8OdTroK0
these are the labels i will be replacing on my famicom once i am done putting it throught the hydrogen peroxide process. i hope that some how the original labels make it through without damage, but i have heard from other people that have done this that the print will end up desolving or rub right off when you clean it to put back together. so to insure that my famicom is as original looking as possible, i took high res photos of the labels and with the help of google translate and an online kanji dictionary i was able to reproduce the lables in vector format for a high quality printing of these at a local print shop. i showed the guy what i was trying to duplicate by bringing the famicom in and told him i was making a vector file and he assured me there would be no problems what so ever, only that he had a minimum purchase price of one full sheet so i might want to arrange the file to fill the page to get the most for my money. anyway, next step is the de-yellowing! video to follow soon!Yellow Super Famicom Hydrogen Peroxide TreatmentChris Ball2012-09-30 | here is a little timeline of the process i went through to get the yellow out of the Super Famicom i just got off ebay. it is pretty easy and just requires a little care to insure that you don't ruin your system or harm yourself. check it out and if you try it yourself just be careful not to get this on your skin for too long and wash it off right away. and wear gloves and eye protection!Bartop Mini ArcadeChris Ball2012-09-10 | This is another cabinet i made from the same design as the MINI NEO GEO. this cabinet runs Final Burn Alpha for the arcade games, so its kind of limited to the titles you can play, but i had to use it because certain games studdered when using mame. Fusion for the Sega games, FCE Ultra for NES and Famicom, ZSNES for Super Nintendo and Super Famicom, Magic Engine for Turbografx 16 and PC Engine and Kawaks for the NEO GEO. everything runs really smoothly, not perfect, but pretty darn close. i had to blast through the menus and games to fit this under 9 min, even then i had to do some fancy editing, but this is my latest project.Bar Top Neo Geo Custom!Chris Ball2012-09-01 | this is a new video i threw together featuring my latest creation. after seeing Unstupid Tube's video with his dual bartop neo geo set up (still jealous) i thought i would give it a shot. it was a little bit of a challenge at times, but i pulled through and this thing is awesome! take a look!!!Mini Neo Geo Bartop ArcadeChris Ball2012-08-25 | this is a mini arcade machine i built from scratch. wood from Home Depot, an Xbox controller hacked and a PC. oh and a lot of time an patience. the pc is shelled running maximus arcade using winkawaks as the neo emulator. its got the universe bios going and has 90 neo geo titles on it (89 or 90) no multiple copies of games or shitty hacks just originals. check it out and let me know what you think and sorry for the sound, i have people in my house that work nights so they were sleeping so its dangerous to speak up.SuperGun Under ConstructionChris Ball2012-08-25 | this is a quick overview of a project i have going on right now thanks to Luke Morses video on how to get a basic super gun set up. i plan on building a custom simple block cabinet for the monitor and the super gun components, basically disassemble everything and set it up in a nice sort of console and run a couple of contollers out of it that i will make out of wood similar to the Neo Geo sticks. i was thinking about throwing an extra bit into this as well, i was planning on having a pc in the console to run mame along with other emulators so i can then run mame etc and use it as a super gun and maybe more via the component IN or even make an RGB cable for my Neo Geo and other game systems. the posibilities are only limited to what i feel like doing, so we will se how far i take this set up.Mineogeo Mini Neo Geo BartopChris Ball2012-08-25 | this is a custom made Neo Geo Bartop arcade machine i made completely from scratch. its got a pc inside running winkawaks through the Maximus Arcade frontend. this was a ground up build from the particle board from Home Depot to the hacked Xbox controller to the Photoshoped marquee and overlay; everything was from scratch done by yours truley! i have made other Mame cabinets before, but this is the first time i have gone this small. i initially thought it was going to be a breeze, but making a cabinet this small certainly has its hurdles. needless to say this was a learning experience and i am extremely happy with the results, the next machine i build might not be as small as this one, but i really like the small footprint it has over a full on or even a mini cabinet. please ask questions if you are looking to build something like this on your own, i would be happy to help!PC Engine USB Composite Out!!!Chris Ball2012-08-01 | this was something i did because i didn't want to add an a/v booster or have some ugly wires hanging out of the back of the exp bus on my system. i wanted my system to retain its small footprint since that is why I and most of us were drawn to the system in the first place. it was tough to actually pull the trigger and do this mod since i have a perfect non-yellowed PC Engine, but i had done this to a Turbografx 16 and it worked like a charm so i figured it was the right thing to do. this tutuorial doesn't have as many photos as i would like of the actual process, but i think it covers the important stuff.Turbografx 16 A/V Mod -Clean!!!Chris Ball2012-07-28 | ***don't attempt this if you don't feel comfortable soldering or desoldering*** here is a site for reffrence about how to remove the RF modulator on a PC Engine, this is where i learned it: